AP 2602 Problem with Code 7.4.100.60

Hi at all,
I have problems with the code 7.4.100.60 and 2602 AP´s.
The AP´s stops delivering services and no client can connected to them. After a reboot
all problems are solved, but this problem comes back every ten days.
In the logs are only shown a disconnect from these AP´s on the controller.
On the AP´s is nothing to find.
Is this a known problem? Is there a workaround available?
Thanks in advance,
Mario

Hello Mario,
As per your query i can suggest you the following solution-
Please check the powering options-
• 802.3af Ethernet Switch
• Cisco AP2600 Power Injectors (AIR-PWRINJ4=)
• Cisco AP2600 Local Power Supply (AIR-PWR-B=)
and Power Draw
AP2600: 12.95W
Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
Hope this will help you.

Similar Messages

CND problem with code-completion

Hi,
First of all I don't really know where to put this post about C++ Pack in NetBeans. I've read one post in which someone suggests that this section will be pretty close...
Maybe someone here would be so kind and try to help me...
I'm using Ubuntu 7.04 and I have a problem with code completion in NetBeans 5.5.1 CND and I'm a little bit frustrated right now....
I installed Netbeans, then CND, Created new C++ Project. Added new source file, with #include <GL/glut.h> directive.
Whole code was compiled without errors, and that's fine.
There were some problems with linking but I've added "glut", "GL", "GLU" string to linker parameters in Project Properties.
The main problem is the code assistant. When I'm hitting "glut" and press ctrl+space it shows functions from glut library but when I type "gl" (to type "glColor3ub...") and try to show the code completion pop-up it shows "No suggestions". The same thing is with GLU library.
I've installed GL, GLU, glut libraries (they all sit calmly in /usr/include/GL).
I've added the /usr/include and /usr/include/GL to C++ section.
I think that the Netbeans is able to find those *.h files because, as I said before, the glut (and the glX) functions are shown properly but there is no sign of "gl" and "glu" FUNCTIONS in code completion (the #define values specified in gl.h and glu.h are on the list, but the functions aren't)...
I don't have idea why glut and glX are working fine, and gl and glu aren't... If anyone have similar problem, know where to look for an answer or have some suggestions I would be much obliged...
I've seen Eclipse CDT, Anjuta, kDevelop, Code::Blocks, VIM + icomplete... after checking them all there is only one decision - I want to use NetBeans CND. It's user-friendly, fast and I just like it. That's why I would really like to know why the code-completion isn't working in 100%...

Vladimir,
The glColor3ub function declaration is in gl.h file (which along with glu.h is included in glut.h).
Thanks Maxim,
In the matter of fact since yesterday I've been looking for the reason why the GL and GLU aren't indexed properly by the Netbeans CC and I've found something.
The GLU library was indexed after deleting
#include <GL/gl.h>directive. So it means that the gl.h library is messing up.
I've checked whole file (gl.h) and noticed that the only part which is in conflict with NetBeans is this one:
#elif defined(__GNUC__) && (__GNUC__ * 100 + __GNUC_MINOR__) >= 303
# define GLAPI __attribute__((visibility("default")))
# define GLAPIENTRYI'm using GCC 4.1 so the expression value is 401, so the GLAPI define looks like the line above.
gl.h is indexed properly by NetBeans when it is representing "extern", so it should look like
# define GLAPI externIt is working fine if you delete this part of gl.h or for example (which I've done) add predefined macro (or change the existing one)
__GNUC_MINOR__=-200I know that it isn't very clean solution... I'm not happy with cheating NetBeans about the version of installed GCC but unfortunately I am not a specialist in GNU C so maybe someone would find more elegant solution.
As far as I know the __attribute__ feature makes the GCC more verbose (warnings, errors) but I don't know how much functionality am I loosing in fact...
Edit: Why the code tags aren't working? :/
Message was edited by:
Makula

Strange Problem with Code Groups / Codes

Hey all, have a strange problem with Code Groups and Codes.
Our data migration team accidentally loaded an early version of our catalog (code groups and codes) in to our 'Gold' configuration client. They then proceed to delete them all via transaction qs41. However, the code groups have been deleted, but not the codes.
So, basically, no codes groups exist in table QPGR or QPGT but all the entries remain in QPCD with the assigment to code groups. The usage indicator is not set on the codes so why they did not get deleted with the codes groups is unknown.
The issue that this is now causing us is that we can't recreate the codes groups with these codes assigned as the system thinks they already exist (via a check on table QPCD i would expect).
Also, i have been unable to recreate what happened did in other clients... seems very strange.
Any help appreciated.
Cheers

Ben,
You could try SE11, and see if you can delete the records from there.. but I'm not hopeful...
Otherwise you may need to write a quick ABAP program to delete the data base entries.
PeteA

Problem With Code/Design View Buttons

(My bad...perhaps a more clear title will help...)
OK, I am working with DW CS4 v.10.0 Build 4117 on a Win XP Pro SP3 platform.
When working with my site files, they open in Code view. The Split and Design buttons are grayed out. When I click on the Layout button, the checkmark is sometimes next to the Code option, but sometimes next to the Design option (even though the page is clearly displayed only in Code view!).
In order to view the file in Design view or Split view, I have to click the Layout button, Click on Code, click on the Layout button again, click on Design or Split View and then it will show the page file in that manner.
This is SO frustrating! Is this a bug in CS4? (I scanned through the other topics and can't seem to find anything about this.) I don't remember having this problem with CS3 and have spoken with other DW CS3 users who also say they have never had this happen.
What can I do?
Thanks in advance for any assistance you can provide.
Susan

OK, all of my site page files are .php extensions.
Here is the code from one of my pages.
<?php require_once('Includes/RandomizerInside.inc'); ?>
<html>
<head>
<meta http-equiv="content-type" content="text/html;charset=utf-8">
<title>Gerald R. Ford International Airport</title>
<link href="Includes/style.css" rel="stylesheet" type="text/css">
<?php require_once('Includes/MetaInformation.inc'); ?>
<?php require_once('Includes/JavaScriptInside.inc'); ?>
<?php require_once('Includes/CommonJs.inc'); ?>
</head>
<body bgcolor="#000000" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<script language="JavaScript1.2">mmLoadMenus();</script>
<table width="100%" border="0" align="center" cellpadding="0" cellspacing="0">
    <tr bgcolor="#00306c">
        <td colspan="2"><img src="NavImages/i-header1.jpg" width="760" height="96"></td>
    </tr>
    <tr>
        <td width="185" valign="top" bgcolor="<?php echo"$bg_color"; ?>">
   <?php require_once('Includes/InsidePageNav.inc'); ?>
</td>
        <td rowspan="2" valign="top" bgcolor="#FFFFFF">
   <table width="100%" border="0" cellspacing="0" cellpadding="10">
    <tr>
     <td>
      
      
      <p align="right" class="PageTitle">NEWSROOM<br><img src="NavImages/spacer.gif" width="555" height="1"></p>
      <p class="BodyCopy"><a href="Pubs.php">Airport Publications</a> | <a href="PR.php">Press Releases</a></p>
      <p class="BodyCopy">To stay current on the latest GFIA news, bookmark this page and revisit it often.</p>
      <p class="BodyCopy">The GFIA Newsroom contains electronic copies
             of <a href="Pubs.php#1"><i>Airport Connections</i></a>, the airport's quarterly newsletter, financial reports, and more.</p>
      <p class="BodyCopy">Members of the press should
              be sure to visit the <a href="Media.php">media information</a> page for contact phone numbers and other valuable resources.</p></td>
    </tr>
   </table>
</td>
    </tr>
    <tr>
        <td bgcolor="<?php echo"$bg_color"; ?>" style="vertical-align:bottom"><img src="NavImages/i-navimage<?php echo"$random_number"; ?>.jpg" width="185" height="300"></td>
    </tr>
    <tr>
        <td colspan="2">
   <?php require_once('Includes/Footer.inc'); ?>
</td>
    </tr>
</table>
</body>
</html>
Any and all assistance will be GREATLY appreciated!
Susan

Problem with code

hi all ! I hadd some problems with my code. I have some dates that should be ordered by the hour (hora) but its not. Now I know its not the SQL because I execute it with my sql control center and its just fine. SO it must be when I pass the data from one object to another.
Here what I do:
OK I think I got it. ITS NOT A SQL ERROR !!! or a table error !!! I executed the code using my sql control center and the result is ordered and correct. So it has to be something related to the code that saves the data. I save the data in a bean like this:
public HashMap getCitasxfecha2(java.sql.Date fecha,String tipo) throws java.sql.SQLException
        BeanDatosCitas t = new BeanDatosCitas();
        HashMap m = new HashMap();
        ResultSet cdr = bd3.busquedaCitas2(fecha,tipo);
        java.sql.Time vector[]= new java.sql.Time[9999];
        System.out.println("salgo del busquedaCitas2");
        int id = 0;
        while (cdr.next())
        //String hora=convertir(cdr.getTime("Hora"));
         id = cdr.getInt("idCita");
            t = new BeanDatosCitas(
            id,                             // Nos servir� como identificador en la tabla HashMa
            cdr.getDate("Fecha"),
            cdr.getTime("Hora"),
            cdr.getString("Protocolo"),
            cdr.getString("DNI"),
            cdr.getString("Opcion"),
            cdr.getString("Observacion"),
            cdr.getString("Horaentrada"),
            cdr.getString("Nombres"),
            cdr.getString("Apellidos"),
            cdr.getString("Prescriptor"),
            cdr.getString("Mutua"),
            cdr.getInt("Sesigast"),
            cdr.getInt("Sesifaltantes"),
            cdr.getString("Tipo"),
            0
            m.put(new Integer(id), t);
        numFilas = m.size();
        return m;
    }Then I do a:
respuesta = bBDCit.getCitasxfecha2(datNac,tipo);
        int nFilas2 = bBDCit.getNumFilas();
        Collection tabla2 = respuesta.values();
        request.setAttribute("citas_diarias",tabla2); And in my JSP I do:
<c:forEach var="fila" items="${requestScope.citas_diarias}">it seems like in any part of this code the error happens. What could it be?
Thanks again!

    public java.util.List getCitasxfecha2(java.sql.Date fecha,String tipo) throws java.sql.SQLException
        BeanDatosCitas t = new BeanDatosCitas();
        java.util.List list = new java.util.ArrayList();
        ResultSet cdr = bd3.busquedaCitas2(fecha,tipo);
        java.sql.Time vector[]= new java.sql.Time[9999];
        System.out.println("salgo del busquedaCitas2");
        int id = 0;
        while (cdr.next())
            //String hora=convertir(cdr.getTime("Hora"));
            id = cdr.getInt("idCita");
            t = new BeanDatosCitas( id,
                        // Nos servir� como identificador en la tabla HashMa
                cdr.getDate("Fecha"),
                cdr.getTime("Hora"),
                cdr.getString("Protocolo"),
                cdr.getString("DNI"),
                cdr.getString("Opcion"),
                cdr.getString("Observacion"),
                cdr.getString("Horaentrada"),
                cdr.getString("Nombres"),
                cdr.getString("Apellidos"),
                cdr.getString("Prescriptor"),
                cdr.getString("Mutua"),
                cdr.getInt("Sesigast"),
                cdr.getInt("Sesifaltantes"),
                cdr.getString("Tipo"),
                0
            list.add(t);
        numFilas = list.size();
        return list;
        int nFilas2 = bBDCit.getNumFilas();
        Collection tabla2 = bBDCit.getCitasxfecha2(datNac,tipo);
        request.setAttribute("citas_diarias",tabla2);That should just about cover it. The JSP can stay the same.

Problem with code-Please Help!!!

Hey guys i have some problems with the following code:
1. I have to do a stutter and reverse of an array [ 2 4 ] and it should return [ 4 4 2 2 ]. I wrote the code and i get [ 2 2 4 4]. How can this be fixed?
public class Part1
     public static void main(String[] args)
          int[] values = {2, 4};
          stutterAndReverse(values);
     public static int[] stutterAndReverse(int[] values)
          //Stutter
          System.out.print("[ ");
          for (int i = 0; i < values.length; i++)
               for(int j = values.length-1; j >=0; j--)
                    System.out.print(values[i] + " ");
          System.out.print("] ");
          return values;
2. This one takes the array and returns the even numbers to the left and odds to the right. It works with the code i have so far but the odds on the right should be in order. For example an array of 6 gives the output [2, 4, 6, 5, 3, 1]. Mine gives [2, 4, 6, 1, 5, 3]. How can i fix this???
public class Part2
     public static void main(String[] args)
          int[] arr = new int[6];
          for(int i = 0; i < arr.length; i++)
          arr[i] = i + 1 ;
          printArray(arr);
          arr = evensToLeft(arr);
          //arr = oddsToRight(arr);
          System.out.println("Evens to the Left");
          printArray(arr);
     public static void printArray(int[] arr)
          System.out.print("[");
          for(int i = 0; i < arr.length; i++)
               System.out.print(arr);
               if(i < arr.length-1)
               System.out.print(", ");
               System.out.println("]");
     public static int[] makeArray(int n)
          int[] arr = new int[6];
          return arr;
     public static int[] evensToLeft(int[] arr)
          int split = 0;
          for(int i = 0; i < arr.length; i++)
               if(arr[i]%2==0) //even
                    swap(arr,i,split);
                    split++;
               return arr;
     public static void swap(int[] arr, int n1, int n2)
          int temp = arr[n1];
          arr[n1] = arr[n2];
          arr[n2] = temp;
Thank you for your time i really appreciate it.

now i'm more confused than ever...:(This'll probably make it worse :)
class Testing
public Testing()
    String[] values1 = {"2","4"};
    System.out.println(java.util.Arrays.asList(values1));
    System.out.println(java.util.Arrays.asList(stutterAndReverse(values1)));
    String[] values2 = {"1","2","3","4","5","6","7","9","11"};
    System.out.println(java.util.Arrays.asList(values2));
    System.out.println(java.util.Arrays.asList(evensOdds(values2)));
public String[] stutterAndReverse(String[] arr)
    String[] temp = new String[arr.length * 2];
    for(int x = 0; x < temp.length; x++)
      temp[temp.length - 1 -x] = arr[x/2];
    return temp;
public String[] evensOdds(String[] arr)
    StringBuffer evens = new StringBuffer();
    StringBuffer odds = new StringBuffer();
    for(int x = 0; x < arr.length; x++)
      if(Integer.parseInt(arr[x]) % 2 == 0) evens.append(","+arr[x]);
      else odds.insert(0,","+arr[x]);
    return (evens.toString().substring(1)+odds.toString()).split(",");
public static void main(String[] args){new Testing();}
}

Wi-Fi problems with the Pixma Pro-100

The wi-fi connection for this printer only works for about a week, then i get a message saying the printer can't be found. But what's odd is I can ping it's address and I can connect to it's web interface with the static IP that the printer has. If I re-run the install with the CD it will work again. It isn't a router or network problem. If it was I wouldn't be able to ping it and connect to it's web page. Seems like a port problem. Are there known problems with wi-fi for this printer?
Why can't a standard TCP/IP port be used?

Hi Michael - I believe I know what the problem was. My printer had a static IP address. I believe it was 192.168.1.7
I have my router configured to start at 192.168.1.100 for DHCP address leases.
When I couldn't print I checked the printer, I discoverd the IP address for the printer was 192.168.1.126. I used that address to bring up the admin web page for the printer. It was still set to static. How it ended up with 192.168.1.126 I don't know.
But anyway, I ran the setup CD again. Set the static IP address to 192.168.1.5, wrote it down, so I'm sure next time if it changes. But I've tried it every day since and it's kept that address. Normally I only use the printer a couple times a month. So I keep it turned off.
Thanks.

Problem with code: reading a string

Hi,
I am very new to java so excuse my naivety. i need to write some code which will decode an encrypted message. the message is stored as a string which is a series of integers which. Eg. Nick in this code is 1409030110 where a = 1, b = 2,... and there is a 0 (zero) after every word. at the moment the code only goes as far as seperating the individual characters in the message up and printing them out onscreen.
Heres the code:
int index = 0;
while(index < line.length() - 1) {
char first = line.charAt(index);
char second = line.charAt(index + 1);
if(second == 0) {
char third = line.charAt(index + 2);
if(third == 0) {
System.out.print(first + "" + second);
index = index + 3;
else {
System.out.print(first);
index = index + 2;
else {
System.out.print(first + "" + second);
index = index + 3;
Basically its meant to undo the code by reading the first two characters in the string then determining whether the second is equal to 0 (zero). if the second is 0 then it needs to decide whether the third character is 0 (zero) because the code could be displaying 10 or 20. if so the first two characters are recorded to another string and if not only the first is recorded. obviously if the second character is not a zero then the code will automatically record the first 2 characters.
my problem is that the code doesnt seem to recognise the 0 (zero) values. when i run it thru with the string being the coded version of Nick above (1409030110) the outputted answer is 1490010 when it should be 149311. as far as i can see the code is right but its not working! basically the zeros are begin removed but i need each group of non-zero digits to be removed seperately so i can decode them.
if anyone has understood any of this could you give me some advice, im at my wits end!
Thanks, Nick

Try something like this:
import java.io.FileInputStream;
import java.io.InputStream;
import java.io.IOException;
import java.util.Properties;
public class SimpleDecoder
    /** Default mapping file */
    public static final String DEFAULT_MAPPING_FILE = "SimpleDecoder.properties";
    /** Regular expression pattern to match one or more zeroes */
    public static final String SEPARATOR = "0+";
    private Properties decodeMapping = new Properties();
    public static void main(String [] args)
        try
            SimpleDecoder decoder = new SimpleDecoder();
            decoder.setDecodeMapping(new FileInputStream(DEFAULT_MAPPING_FILE));
            for (int i = 0; i < args.length; ++i)
                System.out.println("Original encoded string: " + args);
System.out.println("Decoded string : " + decoder.decode(args[i]));
catch (Exception e)
e.printStackTrace();
public void setDecodeMapping(InputStream stream) throws IOException
this.decodeMapping.load(stream);
public String decode(final String encodedString)
StringBuffer value = new StringBuffer();
String [] tokens = encodedString.split(SEPARATOR);
for (int i = 0; i < tokens.length; ++i)
value.append(this.decodeMapping.getProperty(tokens[i]));
return value.toString();
I gave your "1409030110" string on the command line and got back "nick". The SimpleDecoder.properties file had 26 lines in it:
1 = a
2 = b
3 = c
// etc;Not a very tricky encryption scheme, but it's what you asked for. - MOD

2504 autoinstall fails with code 7.4.100.60 and 7.5.102

                   I am running into an autoinstall issue with our 2504 WLCs. Up to code version 7.2 I was able to use autoinstall to prime the WLCs by downloading the config from a TFTP server.
After upgrading to 7.4.100.60 the autoinstall fails because the WLC becomes unreachable after it received a DHCP address, gateway, option 150 and the bootfile. If I configure the controller manually, all is working as intended. Before upgrading to code version 7.4, we installed the FUS update 1.8 as described in the release notes.
The DHCP parameters are correctly handed out and I see the IP in the DHCP bindings with the management interface MAC. The WLC accepted all the parameters and in the console output the autoinstall is attempted as intended.
Pinging the DHCP - IP of the WLC is unsuccessful and thus the WLC cannot reach the TFTP server. A ping to a local broadcast shows 2 other clients (APs) on this segement but not the controller. The switch the WLC is connected to is a 3750 with IOS 12.2(58)SE2.
SW2#sho ip dh bin
Bindings from all pools not associated with VRF:
IP address          Client-ID/              Lease expiration        Type
                    Hardware address/
                    User name
10.80.1.57          f47f.35b6.9080          Mar 01 1993 04:40 AM    Automatic
10.80.1.126         0150.3de5.d9d4.e1       Mar 01 1993 04:58 AM    Automatic
10.80.1.127         01c8.9c1d.af2c.97       Mar 01 1993 04:59 AM    Automatic
SW2#sho arp | i 9080
Internet 10.80.1.57              0   f47f.35b6.9080 ARPA   Vlan8
SW2#sho run int g1/0/16
Building configuration...
Current configuration : 179 bytes
interface GigabitEthernet1/0/16
description WLC8-2504
switchport trunk encapsulation dot1q
switchport trunk native vlan 8
switchport mode trunk
spanning-tree portfast
end
I did not find anything in the bug navigator but this might be due to the fact that hardly anybody uses autoinstall.
Best
   Patrick

Hello Mario,
As per your query i can suggest you the following solution-
Please check the powering options-
• 802.3af Ethernet Switch
• Cisco AP2600 Power Injectors (AIR-PWRINJ4=)
• Cisco AP2600 Local Power Supply (AIR-PWR-B=)
and Power Draw
AP2600: 12.95W
Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
Hope this will help you.

Printing problem with the HP LaserJet 100 color MFP M175

I have recently upgraded to Windows 8. When running Windows 7, I could print as may documents from Word or Excel as I wanted. Now, with Windows 8, I can only print one document. When I try to print another, the program freezes. The only way I can print another document is to restart the computer. Any ideas?

Hi,
Have you installed Driver and software on your Windows 8 machine ? Please download from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5076...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with code need a little help

change it and still comes up the same don;t understand what is wronge with it. new in codeing using dreamweaver c5
         Line 39,        Column 35:     document type does not allow element "div" here; assuming missing "object" start-tag
<div id="google_translate_element"><script type="text/javascript">
         Line 44,        Column 9:     end tag for "div" omitted, but OMITTAG NO was specified
</object></head>
✉
         Line 39,        Column 1:     start tag was here
<div id="google_translate_element"><script type="text/javascript">
         Line 73,        Column 94:     required attribute "alt" not specified
…"><a href="index.html"><img src="bs2.jpg" width="97" height="109" /></a>   </p>

1) It looks like you may have a <div> tag in your <head></head> section of the pages code which surrounds a <javascript> tag and its not allowed in there.
2) You have missed out the alt="" on the image:
img src="bs2.jpg" width="97" height="109" alt="Description here"/>
Change this:
<div id="google_translate_element"></div><script type="text/javascript">
function googleTranslateElementInit() {
new google.translate.TranslateElement({pageLanguage: 'en', autoDisplay: false}, 'google_translate_element');
</script>
To this:
<script type="text/javascript">
function googleTranslateElementInit() {
new google.translate.TranslateElement({pageLanguage: 'en', autoDisplay: false}, 'google_translate_element');
</script>

Simple problem with code

whenever i try running my code i get a error message and it has to do with this part of the code
public int cmd()
    footballer.footComp()=0;
    Collections.sort(xList);
    return footballer.getFootComp();
the method being called is in another class called Footballer, which has the the method footComp()
public static int getFootComp()
    return footComp;
where footComp has also been declared static in the Footballer class
private static int footComp = 0;
this is the error message i get :
required: variable
found : value
thanks for ur help in advance

pls how do i do that?You don't know how to pass a method to a parameter? You don't know how to use that parameter to set footComp?
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

Problems with code autocompletion

Hello
I find new ABAP editor very useful. After installing at office it started working properly without any special configuration. Unfortunately on two other machines (also XP, the same version of SAPGUI, configuration etc.) autocompletion and code expanding doesn't work. It displays suggested piece of code, but when enter is pressed (this is how it works at office) I get just new line. Default key combination (ctrl - enter) doesn't work either. Anyone has any suggestion how to make it work?
best regards
Maciej Gottfried

Really never? Sometimes, it doesn't work because the where-used index has not been rebuilt (usually with SAP standard programs, from time to time with custom programs). You may rebuild it manually from SE38 menu (utilities, update navigation index) or from SE80 navigation tree (other functions, rebuild object list).
By the way, I tried code auto completion with my SAPGUI 7.10 SP 7 : TAB works! (but not ENTER as I said). Thanks Céline. Rob, yes I know, it was in 2009

Problem with faux column and 100% min height

hello
i',m trying to create a faux column on this page:
http://www.malcmabe.co.uk/listtest.html.
the column i'm trying to do is the left hand side menu
column.
i just can't get this to work, so i'm obviousley missing
something.
also, i've set the wrapper as minimum height of 100%. this
isn't working, so my hunch is that it's having a knock on effect to
the measurements of the left hand column....but i may be wrong
any help would be appreciated.
the css file is
http://www.malcmabe.co.uk/listtest.css
malc

malcster2 wrote:
> hello
>
> i',m trying to create a faux column on this
> page:
http://www.malcmabe.co.uk/listtest.html.
> the column i'm trying to do is the left hand side menu
column.
>
> i just can't get this to work, so i'm obviousley missing
something.
>
> also, i've set the wrapper as minimum height of 100%.
this isn't working, so
> my hunch is that it's having a knock on effect to the
measurements of the left
> hand column....but i may be wrong
>
> any help would be appreciated.
>
> the css file is
http://www.malcmabe.co.uk/listtest.css
>
> malc
Malcolm
That's not quite how faux columns work - you'd make an image
the width
of your container with the dimensions you need - perhaps a
line only to
separate a left and right column or something a little more
detailesd -
the image's height can be sliced very small as it will repeat
on the y
axis, attached via css to the container. You can then use
margins or
divs floated left and right to keep your content on either
side.
Something like this I made earlier......
http://www.bealeandpyper.co.uk/
and the background image......
http://www.bealeandpyper.co.uk/p7bpassets/images/p7bp_layout.jpg
btw most of us in here use the faster NNTP for accessing the
newsgroups
- OE, Outlook, Thunderbird and/or dedicated mail/newsreader
apps would
do to access them. Try clicking this link.....
news://forums.macromedia.com
HTH
chin chin
Sinclair

Error message and problem with code

Hi all,
I have a code that i need to print the total
ie: retail multiplied by the quantity entered
this is what I have written
but when compiling error message is (not a statement )
any tips appreciated
or is this part of the code completely wrong???
Remembering that I have 4 arrays in the code
paul
System.out.println((input_part +"\t"+ "\t" + qty[input_part-1]+"\t"+ "\t"retail[input_part-1]+"\t"+ "\t" + "\n");
or is this more appropriate??
total=(quantity*cost);
System.out.println("Total Retail is:" + total);
But with this i get error
Operator * cannot be applied to int, double[]
total=(quantity*cost);

System.out.println((input_part +"\t"+ "\t" + qty[input_part-1]+"\t"+
"\t"retail[input_part-1]+"\t"+ "\t" + "\n");Look at what comes before "retail" in your code sample, and after the "\t" that immediately preceeds it. Should there really be nothing between those two values?
But with this i get error
Operator * cannot be applied to int, double[]
total=(quantity*cost);It's telling you that you can't apply the operator * (multiplication) to an integer and an array.
Did you really think that you'd be able to multiply a number by an array?
Perhaps you meant to do something like
total = quantity * cost[lastElt];

AP 2602 Problem with Code 7.4.100.60

Similar Messages

Maybe you are looking for