Apache and Bonjour

I am running OSX Server 10.6 and Apache -
I can access my website from the internet to my home network using a dyndns fully qualified name.
I can access that same website inside my network using an IP address 192.16.8.2.11
I can not access my website internally using myserver.local from inside.
I can not see the website from the Bonjour Collections in Safari.
AFP works just fine inside my network using myserver.local.
Any ideas why I cannot see my web server using a Bonjour name in the URL?
Larry Good

In no particular order.
[Well-known TCP and UDP Ports Used By Apple Software|http://support.apple.com/kb/ts1629] has the ports; 5353 is the Bonjour (mDNS) port and you'll probably also have 53 (DNS) open when you get DNS configured on your server.
The [Apple Manuals|http://www.apple.com/server/macosx/resources/documentation.html] are available, and you're going to be doing some reading as a server is different from running a client.
I'd suggest getting out of 192.168.1.1/16, as that will cause issues when you eventually want to use a VPN. A subnet somewhere in 10.0.0.0/8 or 172.16.0.0/12 is usually a better long-term choice.
Get DNS configured on your LAN; that's usually the first thing you want to get established, and various services are dependent on properly functioning local DNS.
Get your DNS services configured not in .local or in any other domain you don't have registered.
Get the router widget out of the connection path on your LAN, and use a switch; unmanaged switches "look" like a piece of Ethernet wire.
Use bash-level tools such as ping and dig (or Applications > Utilities > Network Utility) to test your network connectivity.
When you open ports and open firewalls to the Internet, you will get attacked. The last batch of servers I connected were attacked within two hours of connection. Plan on it. Plan for it.
Your ISP can block port 80 and other server-oriented connections.
Your firewall on your Mac OS X Server box is usually set to allow port 80 access.
Your firewall on the edge of your network - whatever that internet gateway is - must be set to port-forward that port 80 traffic from the outside to your internal static IP address assigned to your server.
Get a registered domain for your DNS.
[DNS set-up reading|http://labs.hoffmanlabs.com/node/1436].

Similar Messages

  • Right problem with apache and tomcat

    Bonjour;
    I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
    But I have the following problem with apache (file error.log) :
    [Tue May  6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
    [Tue May  6 17:26:22 2003] [error] Cannot open connection "warpConnection"
    [Tue May  6 17:27:01 2003] [error] Re-Trying to deploy connections
    As root the error msg does'nt exists (lost)
    Best regards;
    A+;

    Run it from the shell to see whats wrong:
    # httpd

  • Jabber and Bonjour windows won't open

    My jabber and bonjour windows have stopped opening. They used to work. One day I closed them and can't get them open again. Any help out there?

    Hi,
    Summary of the last.
    In iChat > Preferences > Accounts the items should be marked as Use the Account
    This will log it in but will not guarantee display of the Account's Buddy List as you can Hide it as I described before.
    In iChat > Preferences > Accounts the list is drag-able so that they can be in any order you want.
    This effects the order they display in iChat's Window menu and the Keystrokes Used. If you have them as AIM, Bonjour then Jabber - the Keystrokes will be Apple (⌘) key and 1 for AIM, then Apple (⌘) and 2 for Bonjour and the Jabber one is then Apple(⌘) and 3 (Keys are used together at the same time)
    It also effect the order the accounts display in iChat menu > Accounts.
    Clicking this red button will hide that particular Buddy List
    This is My iChat Window Menu.
    It show three accounts logged in.
    These menu Options do not mean the Buddy List is visible.
    As I have iChat 4, the order is as I set them in iChat > Preferences > Accounts as the list here can have one item dragged above or below another.
    As I have two names that work with the AIM servers the AM valid names shows as the Account name rather than saying "AIM Account"
    IF you highlight the Buddy List Name as I have done in this pic you can Hide or Reveal the Buddy List (Alternate action). Using the red button highlighted in the first pic hides the Buddy List)
    You will notice the Keystrokes to use at the end of the line.
    I am not sure where you mean you are clicking on a Red button in your last paragraph - unless you mean you are clicking on the iChat icon in the DOCK when it displays a red blob with a number to say how many text messages you have not read there are.
    It is possible to have a chat with a Buddy from a List that is Hidden and clicking the iChat icon should bring the Chat window to the Front rather than make the Buddy List appear.
    Unfortunately I do not have a Buddy free at the moment I write this to check the variants.
    8:03 PM Sunday; June 29, 2008

  • Older versions of Apple Updater and Bonjour can not be deleted

    I sent back my 1st Gen. Nano on recall. I then tried to sync the new 6th Gen. Nano to my iTunes 9.0. iTunes said I had to upgrade to iTunes 10.... When I tried to upgrade I got a message saying older versions of Apple updater and Bonjour could not be deleted. Also said something about Apple Software msi.dll not found.
    Going through the online Apple support procedures I was told to delete iTunes, which I did. It is now gone although I think it is in "My Music" but I don't know how to get it back to where it was.
    I called support and talked to a Asian Lady who spoke poor English and talked VERY fast. As I am 76 and hard of hear, which I told her at the begining, it was hard to talk with her. She told me I had no warrantee service available to me. I told her that the replacement Nano had a 90 day warrantee, which it does. I told her I felt if Apple was providing me with a replacement that required software updates to function in iTunes then their software to download the latest iTunes should contain whatever it needs to do so. SHE HUNGUP on me!!!!!!
    Now my question to you folks, how do I retrieve iTunes from the "My Music" location?
    And how do I do/get whatever I need to upgrade iTunes?
    Please speck like you are talking to an idiot as I am pretty dense on this.
    I did follow Apples on line procedures and this is the mess I'm in.
    Many thanks, Bill

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • Multiple duplicate prints via apple airport and bonjour printer driver on HP Color Laserjet 1600

    Please advise if this request will incur any costs as I have exhausted all self-help resources and articles in your knowledge base. Nothing applies to my issue. I used to be able to use this printer via USB or wireless network using apple airport base station and bonjour printer driver. When my company ugraded to Windows 7, USB seems to work ok and wireless under same setup works too, but each page prints out many duplicates >40 duplicates when in wireless state. I am also trying to print from my IPAD and this does not seem to work at all. If you tell me this printer will not perform, please just be honest and let me know. I don't mind buying another printer if needed but don't want to incur more high level cartridge costs (bought many due to duplicate issue) and could afford the new printer instead. Deciding between brother or hp depending on usable feedback here. Using Lenovo T410 for all that matters...Thank you, Marc

    Unfortunately, without knowing the model of the printer I wont be able to let you know too much information on the issue or how to resolve it. Also, when you upgrade your OS you often have to update the programs you are using, I would recommend uninstalling the printer and using the software available on http://goo.gl/7R6HT.
    Let me know Marc!

  • Error while starting Tomcat Apache and Jaguar services in AW webview server

    hi,
    I am facing a problem with AW webview server. I am not able to restart the Tomcat Apache and Jaguar Service after a planned server reboot activity.I am getting the below error.
    "Could not start Apache Tomcat service on Local Computer. Error 1069. The service could not start due to log on failure"
    The below account has been verified in the Domain controller and confirmed that the account is not Locked out or disabled.
    I have AW , HDS and Webview running on the same server.
    Can someone advice ...

    What OS version?  This might be a windows problem and not a Apache/Jaguar problem.
    david

  • How to configure apache and weblogic in windows 2000

    i am novice,
    i want to configure apache and weblogic in windows 2000
    weblogic version is 6.1
    apache version is 2.0
    how to do?

    George,
    I would take the following 'first steps'
    1)Install Apache20 on your Windows machine following the Apache online documentation
    http://httpd.apache.org/docs-2.0/misc/tutorials.html
    2)Make sure you can 'serve up' static HTML content from your Apache Server
    3)Install Weblogic Server per our online documentation
    http://edocs.bea.com/wls/docs61/install/index.html
    4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
    directly from WLS server
    5)Once you have both of the above 'sanity' checks attempt to configure a simple
    proxy by ppath or mime type via our online documentation
    http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
    Chuck Nelson
    DRE
    BEA Technical Support

  • Need Urgent Help with Apache and PHP

    I have been struggling with apache and php for a week now and I finally broke down to post a message.
    I have apache 1.3 running on my mac mini g4 with 10.4.9 and I installed sql. I went to the entropy website and downloaded php5 to install without knowing I already had php4 on the machine. I installed 5 but could not get it to work. I then went back to httpd.conf and tried to install php4 by uncommenting out the loadmodule and addmodule lines. I restarted apache but php still did not work. I tested the phpinfo.php script but all I got was the script in Safari and not the actual page. At the moment, I have php4 and php5 on my machine but can't get either one to work. I am sure there is an easy fix but I don't know it. Please help.

    The problem is not terribly complicated, but Apache will not start with the entropy file in the folder
    /etc/httpd/users/
    Let me experiment on you. Rename the entropy file and then try to start Apache. To do this, open Terminal and paste this command:
    <pre>sudo mv /etc/httpd/users/+entropy.conf /etc/httpd/users/+entropy<pre>
    Now check the Apache configuration:
    <pre>apachectl configtest<pre>
    If it says "Syntax OK", start Apache:
    <pre>sudo apachectl start<pre>
    Since we only disabled the entropy file, you should be able to enable PHP5 with some more advanced configuring.

  • Enterprise portal access using reverse proxy using Apache and webdispatcher

    Hi Guys,
    As requirement, we need to give solution to customer about Reverse proxy scenario. I am new to this part.
    What we have think of to use Apache and Web dispatcher.
    I tried to search documents and found some sdn links also but still i am not comfortable to go about.
    Need suggestion and document if anyone has used so far.reverse proxy.
    As basis person, we need to do all ( Apache installation, Apache configuration, Web dispatcher installation and configuration, integration with EP.)
    It will helpful to me if i can get Apache installation, Apache configuration part and integration with EP, or web dispatcher, configuration etc.
    Thanks,
    Deepak

    We used Netscaler for Reverse Proxy implementation and can assure you that network team performed most of the set ups. This was on EP 7.01.
    From BASIS stand point it would be primarily Web Dispatcher Configuration.
    Also refer the links I specified in another thread. There are several scenarios discussed there -
    Re: Post values for userid and passowrd fields in logon page
    http://wiki.sdn.sap.com/wiki/display/BSP/Using+Proxies
    ~ Dhanz

  • Apache and Jserv issues - AppsLogin and AppsLocalLogin not working

    Hi,
    I am trying to understand the Apache and Jserv issues
    Home page - http://11i-tst-02.cisco.com:38901 - working fine
    This confirms that Apache core module is working fine. Does this confirm about the pls module also ?
    Apps local login - http://11i-tst-02.cisco.com:38901/OA_HTML/AppsLocalLogin.jsp - throwing Java Exception
    Request URI:/OA_HTML/AppsLocalLogin.jsp
    Exception:
    java.lang.NoClassDefFoundError
    at oracle.apps.fnd.sso.SSOManager.getAppsServletAgent(SSOManager.java:1727)
    at oracle.apps.fnd.sso.SSOManager.getLoginUrl(SSOManager.java:316)
    at oa_html._AppsLocalLogin._jspService(_AppsLocalLogin.java:410)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
    at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
    at oracle.jsp.JspServlet.service(JspServlet.java:148)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
    at org.apache.jserv.JServConnection.run(JServConnection.java:294)
    at java.lang.Thread.run(Thread.java:479)
    Is it related to SSO ? Because error mentions about SSOManager
    But why does AppsLocalLogin need to go thru SSO ?
    Doesn it mean Jserv issues ? I am able to see same message logged in jvm logs ?
    Restarting Apache doesnt help
    Servlet login - http://11i-tst-02.cisco.com:38901/oa_servlets/AppsLogin - throws Internal Server Erorr
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    Apache log doesnt show any error
    Servlet test works - http://11i-tst-02.cisco.com:38901/servlets/Hello
    Example Apache JServ Servlet
    Congratulations, ApacheJServ 1.1 is working!
    OAM works - http://11i-tst-02.cisco.com:38901/servlets/weboam/oam/oamLogin - Navigating to SSO page for authentication
    AOL test works - http://11i-tst-02.cisco.com:38901/OA_HTML/jsp/fnd/aoljtest.jsp
    FND_WEB.PING works - http://11i-tst-02.cisco.com:38901/pls/QTCSTG/FND_WEB.PING
    Connection test works - http://11i-tst-02.cisco.com:38901/servlets/oracle.apps.icx.common.ConnectionTest
    So, my question is why AppsLogin and AppsLocalLogin are not working - if servlets / AOL / FND / OAM links are working
    Is there issue with Jserv ?
    Can someone please explain the significance of the above tests
    And which tests need to pass for AppsLogin and AppsLocalLogin to work
    Thanks

    Since all the tests work fine as you stated above, I suggest you do the following:
    - Rerun Autoconfig on all tiers
    - rm -rf $OA_HTML/_pages
    - Bounce Apache

  • Apache and PHP not working together

    Hey all,
    Ok, I reinstalled my server yesterday and followed the LAMP wiki to set up Apache, MySQL, and PHP. Now, I got Apache and MySql working great, but when I go to directory that has a .php file to open, my brower is asking me what application I want to open with the file.
    I have set up this to handle the docuemtns:
    DirectoryIndex index.php index.phtml index.html
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
    and still no go.
    Anyone got this to work?
    Thanks!!!
    Joe

    cactus wrote:
    http://bbs.archlinux.org/viewtopic.php?t=15596
    Check and see if what I said in my last post is happening to you as well...
    Yeah, I checked and the path is correct...
    Maybe I should just reinstall it?
    Thanks!!!

  • Problems with Apache and custom JSPs

    Hi
    We've made an application on top of IFS, using JWS in our test envirnment. Just before making some stress tests, I'd like to try it using Apache. We're currently having two problems:
    1) I switch to the apache configuration running ifsconfig and not selecting JWS. When I try to access the ifs using http://host/ifs/files, everything goes well except that the "logout" icon doesn't appear. I did a little research and found out that the link goes to /ifs/webui/images/logout.gif. This gives an error in mod_jserv.log, like this one:
    [07/06/2001 22:54:20:315] (ERROR) ajp12: Servlet Error: ClassNotFoundException: webui
    It seems it's trying to find a "webui" class, since in ifs.properties every url that begins with /ifs goes to jserv.
    I don't know if this is a know problem or what should I've check...
    2) This one is more important. We're using some custom JSPs, which we use to edit the properties of some types of documents. Basically, when the user clicks over a file one of our JSP appears. These JSPs call a bean to do some processing, passing the HttpRequest as a parameter. The problem is that when using JWS we get the "path" request variable like in path=/%3A29464
    However, when using Apache we get path=/ifs/files/%3A29464 ( and afterwards we get an exception because the ifsSession.getPublicObject method doesn't work).
    Any hints on this? One way could be to check if the path begins with /ifs/files, but that's not really nice.. and besides I could have the same problem in some other parts.
    It's kind of urgent....
    Thanks
    Ramiro
    null

    Hi,
    The answer to your path problem is that you can make use of API to find out the current path so that it works both with Apache and with JWS. Follow the steps
    1. import the oracle.ifs.adk.http package in your custom jsps
    <%@ page import = "oracle.ifs.adk.http.*" %>
    2. Then within your jsp use the method
    getIfsPathFromJSPRedirect
    <%= oracle.ifs.adk.http.HttpUtils.getIfsPathFromJSPRedirect(request) %>
    This will give you the current path of the object on which you clicked on and which initiates the custom jsp.
    You can look at the CMS application which has made use of this API. URL is
    http://otn.oracle.com/sample_code/products/ifs/sample_code_index.htm
    Choose, sample applicatin -> Content Management system.
    Hope this helps
    Rajesh
    null

  • HT1923 my itunes and bonjour wont uninstall

    my itunes and bonjour wont uninstall

    That's perfect, thanks.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    Next, select any iTunes entries and click "Remove", as per the following screenshot: 
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Client variables not working in Apache and CF8

    I have Apache and CF8 set up with multiple virtual hosts
    locally for development(win xp pro, apache 2.2.4)
    Client variables are not working. I can log into CF
    administrator fine(not sure if authentication uses client variables
    or not). Any site that I work on that uses client variables behaves
    as if the variable is not defined after setting it then going to
    another page that checks for its existence. I have verified that
    client variables are set up in cf administrator.
    Thanks for any help

    Thanks a lot. I understood the mistake. Pls do not spend time on this.
    Thanks,
    Swarna

  • Why do we need the combination of Apache and Tomcatt?

    Both Apache and Tomcatt are web servers. It is possible to get the ob done with any of them. Then, why do we go for the combination of Apache and Tomcatt in most of the Applictions? What is the significance of doing it?

    The Apache Web Server is a high-performance HTTP server, which is very good in serving static content (i.e., HTML pages, JPG files, etc.).
    Apache Tomcat is a servlet container written in Java. It includes an HTTP server, but it isn't optimized as much as the Apache Web Server and probably doesn't have as many configuration options as the Apache Web Server.
    Often people use Apache Web Server as the primary HTTP server, and run Tomcat on top of that. You can configure Apache so that it redirects requests for servlets and JSPs to Tomcat. Apache Web Server cannot run servlets and JSPs by itself.
    Jesper

Maybe you are looking for