Apache cannot start due to libphp5.so undefined symbol: ap_log_rerror_

I was working on some (non-PHP) Apache configuration, when I went to restart httpd I got the following error:
Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: undefined symbol: ap_log_rerror_
Here is the console output:
stav@shiva:~$ sudo systemctl restart httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
stav@shiva:~$ sudo systemctl status httpd
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled)
Active: failed (Result: exit-code) since Wed 2014-07-02 17:25:29 EDT; 1s ago
Process: 2675 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Jul 02 17:25:29 shiva apachectl[2675]: httpd: Syntax error on line 125 of /etc/httpd/conf/httpd.conf: Cannot load /etc/httpd/modules/libphp5.so into server: /etc/httpd/modules/libphp5.so: undefined symbol: ap_log_rerror_
Jul 02 17:25:29 shiva systemd[1]: httpd.service: control process exited, code=exited status=1
Jul 02 17:25:29 shiva systemd[1]: Failed to start Apache Web Server.
Jul 02 17:25:29 shiva systemd[1]: Unit httpd.service entered failed state.
I removed all PHP & deps, reinstalled just PHP 5.5 and PHP worked ok. Then when I installed php-apache and I got the error again.
I downgraded to PHP 5.4 and now it works.
More info:
stav@shiva:/etc/php$ httpd -v
Server version: Apache/2.2.26 (Unix)
Server built: Mar 13 2014 16:37:13
stav@shiva:/etc/php$ httpd -l
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
I'm having trouble installing Apache 2.4 so that's why I'm still on 2.2.
Any ideas how to get PHP 5.5 working?

As far as I know php-apache apache module is compiled against Apache2.4 libraries and is not going to work with previous Apache versions.
You either need to use older version of php-apache module (before Apache2.4 migration) or, highly recommended, move your website to Apache 2.4.

Similar Messages

Error 244: The DataFinder cannot start due to an internal error.

I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
"The DataFinder cannot start due to an internal error.
(244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
Solved!
Go to Solution.

Hi xcontradictorx,
It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures.
If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear).
If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service.
Try the following:
1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
2) Delete the DataFinder entry
3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup
4) Reboot
This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder.
One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
Patrick H | National Instruments | Software Engineer

Error: The DataFinder cannot start due to an internal error

Hello,
I get the same error message every time I reboot my Win 7 PC:
"National Instruments DataFinder"
"The DataFinder cannot start due to an internal error."
"Please wait till the National Instruments DataFinder Index Service is running and try starting the DataFinder again, or reboot your computer. "
I tried finding a DataFinder Index Service in the Control Panel --> Admin,istrative Tools --> Services, as mentioned in this post http://forums.ni.com/t5/LabVIEW/Error-244-The-DataFinder-cannot-start-due-to-an-internal-error/td-p/...,
but there was none such listed service:
I cannot find any mention of a DataFinder or a DataFinder Index Service anywhere else on my PC. Can you please help to find out where this error is coming from and how to fix it? As far as I am aware, I do not use this DataFinder. Thanks!
Regards,
Brandon

Hello BrandonVonk,
The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
Hope this helps,
Siana A.
Application Engineering
National Instruments

Dropbox cannot start due to Adobe Acrobat XI Pro

******BUG******
Concise problem statement: Dropbox will not start due to Adobe Acrobat XI Pro. I have to enable sharing of the temp folder everytime I start Windows. It is very annoying. Please read below:
Hi Preston,
Thank you for contacting Dropbox support!
We've identified that a version of the Adobe application apparently modifies the permissions of the Temp directory. This directory is used by several applications, including Dropbox, to start up, install, and uninstall. You can read more about this here:
http://forums.adobe.com/thread/1159899
If you have Adobe Acrobat XI installed please follow these instructions, if not let us know.
In order to fix this issue I'm going to ask you to go to the Temp directory and make sure your user has "full permissions" over it. To accomplish this follow the next steps:
- Open a Windows File Explorer (not Internet Explorer)
- Type %LOCALAPPDATA% into the navigation bar (include the % percent signs).
- Then right click on the Temp folder and go to properties. Select the Security tab.
- Once you're in the security tab select your user and make sure the user has full control of the folder. You can see this in the following image:
https://www.dropbox.com/s/jrqdf4gnqrgojdy/Screenshot%202014-02-03%2010.29.03.png
- In addition to that go to "Properties" -> "Security" -> "Advanced" and select "Enable Inheritance" and "Replace child object ...". The image below shows the screen:
https://www.dropbox.com/s/w0y7caz0i91g3q7/Screenshot%202014-02-03%2014.08.57.png
When this is done you should be able to restart Dropbox.
Please let me know if you have additional questions.
Best,
Christopher

update to the latest version of acrobat xi pro. if that still causes this issue, report your bug, Adobe - Feature Request/Bug Report Form

SunStudio 11 cannot link libtiff in Solaris 10 (undefined symbol)

Hello
we are producing a software using multiple external libraries, among them Sam Leffler's TIFF library version 3.6.1
This software compiles and runs well on Solaris 9 / SunStudio 11
But in Solaris 10 / SunStudio we get an 'undefined symbol' error even if the symbol exists!!
I have patched the OS and SunStudio to the latest level required but it's no help
the linker error message is:
CC -compat=4 -I../AGR -I../STA -I../SVI -I../KRN -I../COMMON_APAS -I../CXML -I../SCS -I. -I../INCLUDE -I../AFC -I../ITI -I../IEM -I../MMF -I../MMI -I../ICS -I../EIV -I../TSF -I../TTM -I../TIM -I../MIR -I../INA -I../INX -I../DEC -I../MAR -I../IXA -I../MXR -I../ICO -I../JPEG -I../LTIFF -I../OVS -I../UTIL -I../TRE -I../IRE -I../INR -I../IST -I../IXR -I/opt/SUNWspro/prod/include/CC -I/usr/include -g0 -libmil -xtarget=native -mt -xildoff -keeptmp -verbose=%all -L/usr/lib -L/usr/local/lib -LFPCSolaris10 -L../lib/FPCSolaris10 -L/opt/SUNWspro/prod/lib/rw7/CC4 -L/opt/SUNWspro/lib -L/usr/X11R6/lib -o FPCSolaris10/MainItls_ils FPCSolaris10/MainItls_ils.o FPCSolaris10/MAIN_Module_ils.o -lICS -lEIV -lMIR -lINA -lDEC -lMAR -lICO -lMXR -lIXA -lOVS -lUtil -ltiff -lSVIils -lSTAils -lKRN -lSCS -lITIils -lIEMils -lAGR -lMMF -lAFC -lMMI -lCXML -lcommon_apas -Bstatic -lrwtool -Bdynamic -lnsl -lposix4 -lsocket -lxnet -ldl -lgen -lcurses -lXm -lXt -lX11 -lxml2
ld: Software Generation Utilities - Solaris Link Editors: 5.10-1.489
ld: warning: symbol `clog' has differing types:
(file /opt/SUNWspro/lib/CC4/libC.so type=OBJT; file /usr/lib/libm.so type=FUNC);
/opt/SUNWspro/lib/CC4/libC.so definition taken
Undefined first referenced
symbol in file
TIFFOpenMem ../lib/FPCSolaris10/libIXA.a(IXA_ImageManager.o)
ld: fatal: Symbol referencing errors. No output written to FPCSolaris10/MainItls_ils
gmake[1]: *** [FPCSolaris10/MainItls_ils] Error 1
But if I analyse the libraries used the missing symbol is actually there:
nm -g ../lib/FPCSolaris10/libtiff.a
../lib/FPCSolaris10/libtiff.a[tif_msrc.o]:
[Index] Value Size Type Bind Other Shndx Name
[26] | 0| 0|FUNC |GLOB |0 |UNDEF |TIFFClientOpen
[22] | 0| 0|FUNC |GLOB |0 |UNDEF |TIFFError
[24] | 416| 161|FUNC |GLOB |0 |2 |TIFFOpenMem
[23] | 0| 0|FUNC |GLOB |0 |UNDEF |free
[25] | 0| 0|FUNC |GLOB |0 |UNDEF |malloc
[21] | 0| 0|FUNC |GLOB |0 |UNDEF |memcpy
Does anybody have an idea of what's wrong ?
Thank you for your help!

The libraries are probably being linked in the wrong order.
Libraries are processed in the order seen on the link command. When the linker sees an archive library (.a), it pulls in any .o files from it that can satisfy existing undefined references. Suppose libA needs f1 from library libtiff, but -lA appears on the command line after -ltiff. The reference will not be resolved.
Move the -ltiff option to a spot later on the command line, after all libraries that use libtiff, but before any libraries that libtiff uses. If libraries have circular references (A uses B which uses A), leave -ltiff where it is, but add another one later on the command line. The library will be searched twice.
Another option is to build libtiff as a shared library (.so). The position on the link command line of a shared library is less sensitive, and references to it from later files can still be resolved. You don't list a shared library twice.
An unrelated question: Why are you using the -compat=4 option? That option is provided to allow linking code that was compiled by C++ 4.2 (shipped in 1996), or compiling code that predates the 1998 C++ Standard.
You usually cannot mix -compat=4 binaries with standard-mode binaries, you can't use the C++ standard library in -compat=4 mode, and code using C++ features introduced after the ARM (1991) won't compile in -compat=4 mode. Unless you are stuck with 10-year-old binaries built with C++ 4.2, it is best to recompile all your code in default standard mode (without -compat=4).
The C++ Migration Guide explains all the issues involved in converting code from old-style to standard C++.
[http://docs.sun.com/app/docs/doc/819-3689|http://docs.sun.com/app/docs/doc/819-3689]

Camileo S20 - recorded file cannot start due to format error

Hi!
I have a problem here. My camileo S20 format is .avi but when i try to put the film on a stick or dvd and play it on my dvd-player it won't start (format error) , i changed the dvd-player and the same problem , i tried to make it .mpg , still no use.
What can i do ? Please help .

If i connect the cam to the tv it work's but if i burn a dvd with the cam videos the dvd-player won't read them .
@masterG : i tried to convert them into mpg , no use . What should i do ? On the dvd every movie i played worked , except this ones.

Windows cannot start due to file is missing or corrupt Windows/system32/config/system

How do I recover system file from recovery disc ?

Hi,
You can get your missing file from an original windows installation disk.
To replace it you'll need a bootable CD or DVD to start your computer then put the file system (note that there is no extension) in Windows/system32/config/
Cheers,
Service is the lifeblood of any organization.
Everything flows from it and is nourished by it.
Customer Service is not a department... It's an attitude

Fixbspflvr_nt64.exe cannot start or run due to incompatibility with 64-bit

Hello Folks,
Before doing an upgrade from DB2 9.5 FP 4 to 9.7 FP 2, when executed fixbspflvr_nt64.exe as per SAP Note 1332109 got
the following message:
"The program or feature fixbspflvr\fixbspflvr_nt64.exe" cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows copatible version is available"
We are using AMD64 hardware. Did some one had the same issue and got resolution, please share...
Thanks,
Shyam

Hi Shyam,
Did you get any solution from SAP?
I am facing the same problem. I am unable to start my upgrade. I have raised SAP OSS message but I am yet to recieve a reply.
The tool is no longer available on IBM website too as they have released Fix pack 3.
Yuur help will be appreciated.
Thanks and Regards,
Karan Shah

Nokia 6120 Classic cannot be started due to interr...

Hi
I used skype with my Nokia phone. The situation became not to receive texts that the phone memory was full because skype received files were saved in file manager (or something like that). Tried pressing keys of 3, call and *, tried to reset the phone by *#7780# and *7370# but when it restarted, shown as the memory is full. Tried it with nokia PC suite but It didn't let me to delete files received through skype. Then I thought to update software So I started updating software using nokia software updater. It said the old version of software will be replaced by the latest version. The process was interrupted saying that the cable is not fixed properly. But I'm sure it was fixed properly. Then I refixed it again and try but the answer is the same. So I cancelled the recover tab thinking that I can restart the resetting process. But I can't restart the process. Can't even start the phone. It's not detecting the device through PC suite now. Please help. What can I do.

Log Name: Active Directory Web Services
Source: ADWS
Date: 02-04-15 07:26:23
Event ID: 1108
Task Category: ADWS Configuration Events
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxx.com
Description:
Active Directory Web Services cannot be started due to a locked or invalid configuration file.
The error returned was: Unrecognized configuration section appSettings. (C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe.Config line 7)
ADWS cannot start, so the messages.svclog file is not created.
In Powershell, the AD cmdlets don't work :
PS C:\Users\xxxx> Get-ADDomain
Get-ADDomain : The 'system.serviceModel/commonBehaviors' configuration section cannot be created. The machine.config file is missing information. Verify that this configuration section is properly registered and that you have correctly spelled the section name.
For Windows Communication Foundation sections, run ServiceModelReg.exe -i to fix this error.
At line:1 char:13
+ Get-ADDomain <<<<
+ CategoryInfo : NotSpecified: (xxxx:ADDomain) [Get-ADDomain], ConfigurationErrorsException
+ FullyQualifiedErrorId : The 'system.serviceModel/commonBehaviors' configuration section cannot be created. The machine.config file is missing information. Verify that this configuration section is properly registered and that
you have correctly spelled the section name. For Windows Communication Foundation sections, run ServiceModelReg.ex e -i to fix this error.,Microsoft.ActiveDirectory.Management.Commands.GetADDomain

"This device cannot start. (Code 10)" 6th gen nano ?

Hello!
I recently purchased a used ipod nano 6th gen. It was working great by itself but it won't connect to my laptop. Here's the short story:
Ipod worked fine out of the box. Is not recognized by Windows7. Installed and reinstalled the driver, no effect. iPod does not charge from the laptop of from the power outlet. I have itunes version 11.2.2.3 but the ipod has not been able to connect or be recognized by itunes yet.
Here's the Long story w/ the details:
1. Before I connected it to anything with the cable, I was able to use all of the features and played the radio it worked fine.
2. It began to give the low battery warning.
3. I plugged it into my laptop with the usb cable for the first time.
4. Windows (7) gave the error window pop-up: "USB Device not Recognized."
5. If I click on that error pop-up window the next window says "Windows has stopped this device because it has reported problems. (Code 43)"
6. If I open Device Manager, it shows one of the USB ports name is "Unknown Device". If I leave the nano plugged into the USB, the device manger window appears to update every 10s or so and alternates between displaying the port name "Unknown Device"and not displaying the port named "Unknown Device".
7. If I click on device properties of the "Unknown Device" USB port from the Device manager screen, I see that the error also alternates between "Windows has stopped this device because it has reported problems. (Code 43)" and "Currently, this hardware device is not connected to the computer. (Code 45)"
8. When attached to the USB port the nano screen alternates between 3 displays, 1 - "low battery", 2 - the apple logo, 3 - the home menu, which is operational. The battery meter symbol shows 0 power and does not indicate charging.
9. If I unplug the nano it does not turn on with the sleep/wake button, I think due to depleting the battery.
10. If I plug the nano into the wall charger, the screen alternates between the home menu which is operational and the apple logo. The battery symbol shows 0 power and does not indicate charging.
11. I followed some troubleshooting steps, on the "Device Properties" window I see the following information:
Driver Provider: Microsoft; Driver Date: 6/21/2006; Driver Version: 6.1.7601.18328;
12. If I select "Driver Details" button, a window appears that says"No Driver files are required or have been loaded for this device"
13. I found trouble shooting steps on the apple website to install the driver, which I followed. I navigated to the folder with the driver as recommended from the apple website and selected it. C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers "usbaapl", then selected "Apple iPod USB Driver" from the list to install.
14. I get the error window titled "Update Driver Warning" which explains installing the driver is not recommended as Windows cannot verify it is compatible with my hardware, but I proceed with "yes".
15. Next window titled "Update Driver Software - Apple Modbile Device USB Driver" shows the error "Windows encountered a problem installing the driver software for your device; Windows found driver software for your device but encountered an error while attempting to install it; Apple iPod USB Driver; This device cannot start. (Code 10)" and it suggests to download a new driver.
16. Next, I uninstalled the driver and followed all of those steps and it indicated success, also chose delete driver software option.
17. If I plug in the nano at this point I get the indication windows is trying to install driver software, and then the same error occurs as when I first plugged it in "USB Device not Recognized." and I can go through all of the steps again.
18. The Driver details button gives the following info:
Provider: Apple, Inc.; File Version: 1,64,0,0; file names usbaapl.sys & usbaaplrc.dll; driver version 6.0.9999.65.
19. Now the device manager window alternates between showing and not showing the USB port named "Apple Mobile Device USB Driver".
20. If I look under Devices and Printers, it shows a generic icon with the title "Apple Mobile Device USB Driver" with a yellow exclamation mark and the status shows "Needs troubleshooting"!
Can anyone help me I will give you any detail and info you want!
thanks!
steve

Hi: You need to download and install this graphics driver... This package provides the AMD video drivers and control panel for the supported notebook models that are running a supported operating system. File name: sp57199.exe

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

Not enough Ram memory and cannot save due to a program error in photoshop cs6

Hi, I'm currently a beginner at photoshop cs6, and I've been using it since december last year, mostly to draw stuff and it has worked fine with few to no errors at all.
However, recently when I've been drawing, the same message keeps popping up over and over again "Can't use (tool) due to the computer not having enough ram" followed by either "cannot save due to program error" or, it just simply crashes.
This is obviously a something that worries me A LOT since at first, I thought that it was just a small error, but recently, it's been like this for several day s and I've been forced to re-start the computer (and photoshop) countless times... It really slows down my working progress and is VERY annoying to deal with.
As a beginner though, I don't really know how to fix this. I've been trying to look up some answers on this site, but I've just not found any answer yet...
I'm currently using photoshop cs6 that's up to date and I've got lots of memory left on my computer, so, I'm wondering. What exactly is the cause of this problem, and how can I fix it? Please answer as fast as you can.. I'm getting a bit desperate...
Oh, in case you're wondering, they're all saved as PSD files and every single one of them has about 15+ layers on them.

It would help if you could list a few things:
1. Your operating system
2. How much physical RAM do you actually have in your machine?
3. Under Preferences > Performance, have you allocated "Scratch Disk(s)"?
4. Also under Preferences > Performance > Memory Usage, what is the "Ideal Range" listed there, and what % is "Let Photoshop Use"?

OBIEE 11g opmnctl services cannot start (ping failed in ready callback)

Hi,
The BI server is up and running
The platform is Linux, searching forums it's due to /etc/hosts and it is defined as
127.0.0.1 localhost.localdomain localhost
127.0.0.1 <servername>.<domain> <servername>
All OPMN services cannot start with error messages (ping failed in ready callback).
Any idea is highly appreciated !!!
Thanks.

Hi,
Make sure static ip r u using? If u used to installed dynamic
Ip it throw this kind off issue . I have face this same issue in obiee11.1.1.3 with dynamic ip address
Note: u shoud use static ip ( configure look back adopter )
Thanks
Deva

A lot of problem for an error: Cannot start Managed Server through NM

Hi, all. Thank for coming here.
My main problem is cannot start Manager server through Node Manager. I've configured with the same way on my friend's network and It's works but It's wrong with mine.
my weblogic domain:
Machine 1: Administration Server + 1 Managed server
Machine 2: 1 Managed server
all of these servers communicate through SSL protocol. When I try to start Managed Server on remote machine:
output from console which was invoked startWebLogic.sh
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
And this is MS01 log:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Starting WLS with line:
+/opt/Oracle/Middleware/jrockit_160_14_R27.6.5-32/bin/java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=MS01 -Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.system.BootIdentityFile=/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.ReverseDNSAllowed=false -Xrs -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3 -Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.35:7001 -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_wlp1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/wlportal_10.3/p13n/lib/system:/opt/Oracle/Middleware/wlportal_10.3/light-portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/lib/system:/opt/Oracle/Middleware/wlportal_10.3/analytics/lib/system:/opt/Oracle/Middleware/wlportal_10.3/apps/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/deprecated/lib/system:/opt/Oracle/Middleware/wlportal_10.3/content-mgmt/lib/system -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/wlportal_10.3/portal/lib/security weblogic.Server+
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
+JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
The application has requested the JVM to exit with an fatal error from JNI. Error message:
JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Stopping PointBase server...
PointBase server stopped.
And this is output from console which node manager runs on:
+<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
+<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
I tried to start Managed server some times again, but I face up to strange issue, this is output from console which Admin Server runs on (these exception messages throws continuously):
+<Sep 9, 2010 12:42:53 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource-nonXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "p13nDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
+<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceAlwaysXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
I can ensure that all of these connection pool has configured to run on 9093 port already. Then I view the DOMAIN_NAME/pointbase.log, it said:
Unable to start the server. start server error: java.net.BindException: Address already in use
I cannot understand what's run on pointbase address ?
All of these error make me angry, because I've configured with the same way on other system and It's work. I've spent all of week to fix these bug, but I'm having nothing :((
Please help me.

Thank Jay SenSharma.
I've looked for these JAVA_OPTION values you said, but I cant found them. That value is content of JAVA_DEBUG option, not JAVA_OPTION. In my situation, JAVA_DEBUG=" " (it's not set by default).
Please re-view my error log:
Node Manager output:
+<Sep 9, 2010 11:32:44 PM> <WARNING> <Exception while starting server 'MS01'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Sep 9, 2010 11:32:44 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'MS01'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Managed server MS01's log:
+<Sep 9, 2010 11:45:05 PM> <INFO> <NodeManager> <Server output log file is '/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.out'>+
+<Sep 9, 2010 11:45:07 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32 from BEA Systems, Inc.>+
+<Sep 9, 2010 11:45:09 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 9216172 Tue Jan 12 02:07:27 PST 2010+
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>+
+<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - /opt/Oracle/Middleware/user_projects/domains/devdomain/<unknown>:11:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>+
+<Sep 9, 2010 11:45:14 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log00002. Log messages will continue to be logged in /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log.>+
+<Sep 9, 2010 11:45:14 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log is opened. All server side log events will be written to this file.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details..+
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+     at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)+
+     at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+     Truncated. see log file for complete stacktrace+
Caused By: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)+
+     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+     at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+     Truncated. see log file for complete stacktrace+
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
+     at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)+
+     at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+     at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+     at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+     at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+     Truncated. see log file for complete stacktrace+
Caused By: java.lang.RuntimeException: There were errors initializing your configuration: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal store error> org.apache.openjpa.util.StoreException: com.pointbase.jdbc.jdbcUniversalDriver
+     at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:123)+
+     at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.createConnectionFactory(JDBCConfigurationImpl.java:776)+
+     at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:683)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:288)+
+     at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+     at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+     at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+     at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)+
+     at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)+
+     at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
+     at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
+     at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
+     at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
+     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)+
+     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
+     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
+     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
+     at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
+     at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)+
+     at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)+
+     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+     at weblogic.security.SecurityService.start(SecurityService.java:141)+
+     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
Caused by: java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
+     at java.lang.Class.forName0(Native Method)+
+     at java.lang.Class.forName(Class.java:169)+
+     at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:85)+
+     ... 38 more+
+     at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:302)+
+     at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
+     at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
+     at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
+     at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
+     Truncated. see log file for complete stacktrace+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>+
+<Sep 9, 2010 11:45:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:+
There are 1 nested errors:
+weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)+
+     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)+
+     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
+     at weblogic.security.SecurityService.start(SecurityService.java:141)+
+     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
+>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>+
+<Sep 9, 2010 11:45:17 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>+
+<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>+
+<Sep 9, 2010 11:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 16443>+
+<Sep 9, 2010 11:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>+
+<Sep 9, 2010 11:45:18 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>+
ps:
I've come your weblog and found alot of tips for debugging WebLogic Server exceptions. It's really helpful. Thanks.
Edited by: Doubt_Man on Sep 10, 2010 10:49 AM
Edited by: Doubt_Man on Sep 10, 2010 3:54 PM

Http server cannot start after running the following JSP

Hi,
I have 9iAS 1.0.2.2 and it has been working fine.
My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
I also check the oci.dll files, and I have the oci.dll file in the following directories:
c:\oracle\ora81\BIN 87KB
c:\oracle\806\BIN 38KB
c:\oracle\iSuites\BIN 87KB
I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
OR
the OCI.DLL file is corrupted in one of the above directory.
Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
I really appreciate if someone could give me some pointers about this.
Thanks;
Kelly.
<%@ page language="sqlj"
import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
e" %>
<HTML>
<HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
<BODY BGCOLOR="white">
<% String empno = request.getParameter("empno");
if (empno != null) { %>
<H3> Employee # <%=empno %> Details: </H3>
<%= runQuery(empno) %>
<HR><BR>
<% } %>
<B>Enter an employee number:</B>
<FORM METHOD="get">
<INPUT TYPE="text" NAME="empno" SIZE=10>
<INPUT TYPE="submit" VALUE="Ask Oracle");
</FORM>
</BODY>
</HTML>
<%!
private String runQuery(String empno) throws
java.sql.SQLException {
DefaultContext dctx = null;
String ename = null; double sal = 0.0; String hireDate = null;
StringBuffer sb = new StringBuffer();
try {
dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
"tiger");
#sql [dctx] {
select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
INTO :ename, :sal, :hireDate
FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
sb.append("Name : " + ename + "\n");
sb.append("Salary : " + sal + "\n");
sb.append("Date hired : " + hireDate);
sb.append("</PRE></B></BIG></BLOCKQUOTE>");
} catch (java.sql.SQLException e) {
sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
} finally {
if (dctx!= null) dctx.close();
return sb.toString();
%>

Hi Jim,
I have the same environment with almost similar problem, no IIS services being started, but HTTP_Server still failed to start. Below log:
+10/09/28 23:35:04 Start process+
+[Tue Sep 28 23:35:06 2010] [warn] pid file c:/oracle/frhome_1/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous+
Apache run?
ap_spawn_child: Bad file descriptor
Couldn't fork child for piped log process
Regards,
Chai
Edited by: user13350226 on Sep 28, 2010 9:14 AM

Apache cannot start due to libphp5.so undefined symbol: ap_log_rerror_

Similar Messages

Maybe you are looking for