Apache setup
Please bear with me on this one, I tend to ramble with lots of information.
I was playing around with apache with hopes to host a small personal website from my mac. So I figured out how to start the service and where to place the html files and such but I am having a strange problem.
Well first of all it won’t recognize just any .html file that I rename to index.html, ie. it will not load that as the "homepage". What I mean by this is I gathered a bunch of random .html files. Some were quickly created in iWeb and Photoshop for quick testing, others were copied from real websites, and others were from current projects I am working on (all of these gathered just to test how it works). All of these (at separate times) were renamed to index.html and placed into the Library/WebServer/Documents directory. Then when I open safari and go to http://localhost/, it would not load that new index.html as the "homepage", just the default "Apache installation successful" (or whatever it says there). It didn't NOT load for all of them however. I noticed that any of the .html files that had a preview icon rather than just the default html icon did load correctly. They are all legitimate .html files and open in safari if double clicked, but the ones without a preview icon aren't recognized by Apache for some reason.
Now to make it more strange, one of the index.html files that did work correctly is "stuck" as the homepage. What I mean by this is I took an index.html file that had a preview icon, placed it in the Documents folder, opened localhost, and it worked fine. I then deleted that same index.html file to default back to the "successful installation" homepage, go back to localhost and that other index.html file is still set as the home page. Even after I deleted it from the documents folder! I even tried to place a different index.html file (another one that did work before) in the documents folder, but it still loads the one that is "stuck".
But, now if I enter the IP address in the address bar of safari, I get the default Apache page, not the "stuck" page. Even if there is a different index.html page in the documents folder, I still get the default Apache page.
Any suggestion on to what could be wrong? Is there any way to just reset the whole thing to the way it was before I used it to start over? BTW, I never edited any config files or deleted any other filed except the inded.html files I created.
Oh my god, I'M A FREAKING IDIOT!!!!! I never hit the reload button in safari to open the updated page in the directory. I feel so dumb right now after posting that long thread asking what could be wrong. Thanks anyway no need for a suggestion now. LOL
Similar Messages
-
Hi,
We are trying to configure Apache server on a new Oracle 10G Solaris 10 servers.
We have configured the httpd.conf file as well and set a port 8001 open for web pages.
Certain pages are using the Apache's PL-SQL gateway module ( mod_plsql) . These page links are like http://hostname:8001/pls/DAD_NAME/HelloWorld
HelloWorld is my Procedure in backend database.
We have configured the dads.conf file( u01/app/oracle/product/10.1.2_as/Apache/modplsql/conf/dads.conf) to setup the Apache PLSQL gateway.
The following are the contents we added in dads.conf file,
<Location /pls/DAD_NAME>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername ssd
PlsqlDatabasePassword xyz
PlsqlDatabaseConnectString athos_ssd2.world
PlsqlAuthenticationMode Basic
</Location>
Apache logs are showing the following,
[Mon May 18 12:15:31 2009] [error] [client 172.24.225.32] [ecid: 1242645331:172.25.242.71:14041:0:1,0] mod_plsql: /pls/DAD_NA
ME/HelloWorld HTTP-503 ORA-12154 ORA-12154: TNS:could not resolve the connect identifier specified\n
/u01/app/oracle/product/10.1.2_as/Apache/Apache/logs/access_log.1242604800: Permission denied
Error we are getting on webpage
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Please suggest a way out so the helloworld procedure is called from webpage link mentioned above.have you verified you can connect with the oracle client (on the apache server) using the tns name you configured for the apache mod?
-
Tomcat 4.0.1, JWSDP and Apache - setup help please
Windows 2000 env.
First off, the latest Comanche release (Apache GUI) isn't really stable
enough to use.
Has anyone got any experience with running Java Web Services Development
Package with an Apache server.
JWSDP is packaged with a version of Tomcat 4 - a VERSION of it. It doesn't
seem to have WARP capability, and some connectors seem to be missing from
it.
I was unable to get this to work with Apache, and have decided to switch
back to the standard release of Apache/Jakarta Tomcat 4.0.1.
Has anyone else tried using the JWSDP??? I'm setting up a development
server, and figured JWSDP would be nice, since it has some components
already installed, ie SOAP.
JWSDP doesn't create a workers.properties and mod_jk.conf-auto file. Are
there any new tricks to setting up Tomcat 4 with Apache since Tomcat 3.x?
Is there a different way to configure JWSDP for use with Apache Web Server?
setup Tomcat 4 Apache web server
setup Tomcat 4 and Apache web server
setup JWSDP ApacheThanks...
Since then, I have gone to Tomcat 4.0.1, and will install SOAP, etc as needed.
As I have not been able to find a complete Windows Apache and Tomcat installation guide, I will be writing one soon and posting it.
Also check out http://www.tek-tips.com in the forum areas/mis/it/Web Server/Apache Group: Apache. -
I am going to be running a server this summer for a research project and was wondering if someone could help me out with the apache settings.
Currently everything works perfectly. The server is an old HP notebook running at 700 Mz with 768 mb ram. Not pretty, but each page is only 7 or 8 kb to serve and I should only have 300 people accessing it to take the survey over a 3 month period. The survey is run by limesurvey if anyone is familar with it, which is php based and uses mysql.
Since it is a light machine, I feel like I should be setting the maxclients, maxrequests, and maxkeepalive, and probably more that I dont know about. Research around the web has told me that all of this is pretty variable and I am not going to know untill I put it in the field and check out the server load. The problem with that is I am going to have enough trouble getting people to take the survey. If the server goes down or doesn't work, I'll be SOL.
Does anyone have any good ideas on how to test it out and can help me configure apache?
I was also wondering about security. I have port 80 open for http access and 22 so that I can ssh into the server when needed. Should I be installing a firewall or doing any other configurations?
I know its a lot, but any help would be appreciated.
Thanks.I suggest changing the SSH port from 22 to something else. Its more secure. It can easily be found with a port sniffer, but for script-kiddies, it will be hard to find Also make sure you read the wiki article on SSH and change to the secure protocol. If you want, you could also setup iptables and that jazzz.
Last edited by haxit (2009-03-19 15:40:07) -
Apache setup in 10.3.9, enable documentroot
Hi,
I've been using the personal web sharing feature of os x for a while now and can access all work in my sites folder from http://localhost/~digitalpencil/
I understand however, that you can also access apache through the webserver documentroot? i.e machd/library/webserver or http://localhost/mysitefolder/
How do I set this up?
All advice is much appreciated.
ThanksDon't bother.. I'm an idiot, the folder aptly titled 'documents'.. lol
-
Need help regarding Apache httpd.conf and PHP setup.
Hi,
I am facing problem setting up my PHP and apache setup. I have installed Apache2.2 Root path = C:\Program Files\Apache Software Foundation\Apache2.2
I have also installed PHP in my C:\PHP drive earlier. I moved this PHP folder to C:\Program Files\Apache Software Foundation\Apache2.2 just to keep all things at one place.
I have copied php5ts.dll at 4 locations - C:\Program Files\Apache Group\Apache2 \bin , %SYSTEMROOT%\System32, %SYSTEMROOT%\system and %SYSTEMROOT%. I have also added these paths in Environment variable 'PATH'.
In httpd.conf file entries are as follows:
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
I have added these 3 lines as
LoadModule php5_module php/php5apache2.dll
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
When restarting apache http server I get message as:
httpd.exe error ...... cannot load C:\Program Files\Apache Software Foundation\Apache2.2\php\php5ts.dll into the server. The specified module could not be found.
I have checked that php5ts.dll DLL exist at above path. Please help me out urgently.Sorry I don't have Windows available to check the paths. With recent versions
of PHP I never copied files out of the php source directory.
Make sure the Oracle 10g Instant Client is in your PATH environment variable.
You could try using the PHP Windows MSI installer.
cj -
Having a problem setting up apache...
Fisrt off, let me say this is my first stabe at this, so bear with me.
I set up apache, php and mysql, and pretty much successfully. I can connect to my web server via IP. But if I try to connect to it via the hostname it fails. I followed the directions in the wiki entry for it. Here are the contents of my /etc/hosts and /etc/rc.conf file as well as my /etc/httpd/httpd.conf file.
Can anyone tell me why my hostname isn't working?
/etc/hosts:
/etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 chxsrv chxsrv
# End of file
/etc/rc.conf
...(yada)...
# NETWORKING
HOSTNAME="chxsrv"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="eth0 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
...(blah)...
and last but not least, the /etc/httpd/conf/httpd.conf file:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo.log"
# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
# server as "@@ServerRoot@@//var/log/httpd/foo.log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 192.168.0.100:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User nobody
Group nobody
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName chxsrv:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/home/httpd/html"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/home/httpd/html">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
<IfModule mod_php5.c>
DirectoryIndex index.php index.html
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
</IfModule>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/httpd/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#CustomLog /var/log/httpd/access_log common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
CustomLog /var/log/httpd/access_log combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#Alias /image/ "/home/httpd/images/"
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/cgisock
</IfModule>
# "/home/httpd/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/home/httpd/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /etc/httpd/conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile /etc/httpd/conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the /etc/httpd/conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include /etc/httpd/conf/extra/httpd-mpm.conf
# Multi-language error messages
Include /etc/httpd/conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include /etc/httpd/conf/extra/httpd-autoindex.conf
# Language settings
Include /etc/httpd/conf/extra/httpd-languages.conf
# User home directories
Include /etc/httpd/conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include /etc/httpd/conf/extra/httpd-info.conf
# Virtual hosts
#Include /etc/httpd/conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include /etc/httpd/conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include /etc/httpd/conf/extra/httpd-dav.conf
# Various default settings
Include /etc/httpd/conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Like I said, I can connect to this from other machines on my network via IP, but not hostnames. Any thoughts?I know this post is a couple months old but for future reference:
The problem is with /etc/hosts.allow
You need to add
httpd: ALL
Once you all that youll have external access to your apache setup. -
I can't start apache since upgrading to Mountain Lion
Why Apple remove the web sharing feature I'll never understand. I have tried everything I've found on the web to get apache started but nothing seems to work. Apache started for a brief period of time but now it won't start at all. sudo apachectl start/tsop/restart all seem to work with no errors but when I go to localhost I get the "Safari can't find the server" error page. I've rebuilt my user.conf file, I've tries forcing org.apache.plist to start (took me a while bu tI think I've finally undone this bad idea). I've even tried OSX Server but even that was causing problems and to recreate my multisite setup I was using under apache in Lion would be like using an atomic bomb to take care of an ant hill in my back yard. I'm no apache server admin so while I can read the aache logs in console I'm not entirely sure what I should be looking for to see if an error is occuring. A cursory glance seems to show nothing more then the obvious things like "File does not exist". Thanks, of course you don't think the file exists beacuse the server isn't running. Any suggestions on how I could nuke apache and return it to its default state in either Lion or Mountain Lion?
I see what you mean now that I look. I also installed Server.app and myWeb Sharing option is gone from the Sharing prefpanel. I wonder if it still appears for those who never installed Server.app?
The previous Apache setup is still there in the old location at /private/etc/apache2/ and serves files from /Library/WebServer/Documents/ The problem is that Server.app overrides the launching system for the old setup. You may need to go to the file at /Library/LaunchDaemons/com.apple.serverd.plist and rename it by appending an "X" to the end which will prevent it from launching. When you reboot you won't be able to log into the Server.app. You should then be able to run launchctl and start Apach from the file at /System/Library/LaunchDaemons/org.apache.httpd.plist . If that file is missing report back here and we'll figure out what's wrong. -
Apache in front of OC4J? AJP13?
Hello,
I need to place OC4J behind Apache.
I have a working Apache setup that talks to JBoss/Jetty via AJP13 on port 8009. How can I configure OC4J to listed to some port and listen for AJP13 requests?
Does OC4J come with its own protocol and Apache module?
When I start OC4J and use `nmap' to check which ports OC4J is listening, I only see port 8888, which is OC4J's internal HTTP server. I want to put Apache in front instead.
I couldn't find any documentation about this, so any help would be great.
Thanks,
OtisFor 9.0 PE you can also use the apache mod_jk plugin to have an apache in front of Glassfish/9.0PE. Google around for mod_jk and glassfish and you should find some blogs about it.
-
Dreamweaver created website on Apache/Tao Linux host
I was creating a simple 5 page website based on a DW
template, and once I FTP'd the home page ("Index.html") to the web
host, I recieved an Apache setup screen - as if the file I placed
wasn't read or understood. I renamed the original Index.html back
and the site came up as expected. The original file is a very basic
html file - Is there any known issues with Dreamweaver created
files on host sites using Apache & Tao Linux, and if so is
there a method of preparing the web pages for use on such a site?
Thanks,
Tom> rename your new "homepage" to index.html
to add- to do this in dreamweaver so it maintains/fixes links
when you
change the case of a file or foldername-
use the Files panel.
right-click on Index.html and "rename" to fooindex.html
okay updating links.
rename fooindex.html to index.html
okay updating links.
now upload ALL changed files -
How can I stop Lion from overwriting my apache conf files
I am at the point of abandoning OS X forever and returning to loading NetBSD on macs. I have never been so angry at a piece of Apple software.
On reboot, the server completely wiped out my apache configuration and rebuilt it. Thankfully I had backups.
How I can prevent Lion from interfering with my apache setup? I will NEVER use that crappy admin tool again. Webmin is FAR superior to it if I need a GUI tool. I can live in the shell very happily. I don't want to have to install a new webserver from source if I can avoid it. I just want to stop Lion from destroying my conf files.
How do I wrest control from this monster?All we did was not modify httpd.conf other than adding an include at the end. If you put your content in other files, it doesn't seem to mess with them.
-
Virtual Hosts in Apache HTTP Server
How to configure virtual hosts in Apache HTTP Server httpd.conf file.
If I want to access my server with some other name(alias), how can I do this ?
Suggestions in this matter would be highly helpful.
Thanks
Vidhyut AroraFollowing is a note explaining how to setup
Virtual hosts.
Hope this helps
Ranga
Note:70647.1
Subject: Apache Server Virtual Hosting
Last Revision Date: 07-JUN-2001
PURPOSE
This document discusses considerations for setting up virtual hosts on an
Apache machine, to include how to get the hostname working and how to
configure Apache.
SCOPE & APPLICATION
The information in this document is intended for those who manage multiple sites
using an Apache machine.
REFERENCES
First published in Apache Week issue 31 (6th September 1996)
Last update 20th September 1998
Using Virtual Hosts
Virtual Hosts let you run multiple independent Web sites on a single host with
a single Apache setup.
One of the most important facilities in Apache is its ability to run virtual
hosts. This is now the essential way to run multiple Web services - each with
different host names and URLs - that appear to be completely separate sites.
This is widely used by ISPs, hosting sites and content providers who need to
manage multiple sites but do not want to buy a new machine for each one.
Picking an IP address
There are two types of virtual hosts: IP-based and non-IP-based. The former is
where each virtual host has its own IP address. You must have a new IP address
for each virtual host you want to set up, either from your existing allocation
or by obtaining more from your service provider. When you have extra IP
addresses, you tell your machine to handle them. On some operating systems, you
can give a single ethernet interface multiple addresses (typically with an
fconfig alias command). On other systems, you must have a different
physical interface for each IP address (typically by buying extra ethernet
cards).
IP addresses are a resource that costs money and are increasingly difficult to
get, so modern browsers can now also use 'non-IP' virtual hosts. This
lets you use the same IP address for multiple host names. When the server
receives an incoming Web connection, it does not know the hostname that was used
in the URL. However, the new HTTP/1.1 specification adds a facility where the
browser must tell the server the hostname it is using, on the Host: header. If
an older browser connects to a non-IP virtual host, it does not send the Host:
header, so the server must respond with a list of possible virtual
hosts. Apache provides some help for configuring a site for both old and new
browsers.
Picking a Hostname and Updating the DNS
Having selected an IP address, the next stage is to update the DNS so that
browsers can convert the hostname into the right address. The DNS is the system
that every machine connected to the internet uses to find the IP address of host
names. If your hostname is not in the DNS, no one can connect to
your server (except by the unfriendly IP address).
If the virtual hostname you are going to use is under your existing domain,
you can just add the record into your own DNS server. If the virtual hostname
is in someone else's domain, you must get them to add it to their DNS
server files. In some cases, you want to use a domain not yet used on the
internet, in which case you must apply for the domain name from the
InterNIC and set up the primary and secondary DNS servers for it, before adding
the entry for your virtual host.
In any of these cases, the entry you need to add to the DNS is an address record
(an A record) pointing to the appropriate IP address. For example, say you want
the domain www.my-dom.com to access your host with IP address 10.1.2.3: you
must add the following line to the DNS zone file for my-dom.com:
www A 10.1.2.3
Now, users can enter http://www.my-dom.com/ as a URL in their browsers and get
to your Web server. However, it will return the same information as if the
machine's original hostname had been used. So, the final stage is to tell Apache
how to respond differently to the different addresses.
How Apache Handles Virtual Hosts
Configuring Apache for virtual hosts is a two-stage process. First, it needs
to be told which IP addresses (and ports) to listen to for incoming Web
connections. By default, Apache listens to port 80 on all IP addresses of the
local machine, and this is often sufficient. If you have a more complex
requirement, such as listening on various port numbers, or only to specific IP
addresses, then the BindAddress or Listen directives can be used.
Second, having accepted an incoming Web connection, the server must be
configured to handle the request differently, depending on what virtual host it
was addressed to. This usually involves configuring Apache to use a different
DocumentRoot.
Telling Apache Which Addresses to Listen To
If you are happy for Apache to listen to all local IP addresses on the port
specified by the Port directive, you can skip this section. However, there are
some cases where you want to use the directives explained here:
- If you have many IP addresses on the machine but only want to run a Web
server on some of them
- If one or more of your virtual hosts is on a different port
- If you want to run multiple copies of the Apache server serving different virtual
hosts
There are two ways of telling Apache what addresses and ports to listen to:
- Use the BindAddress directive to specify a single address or port
- Use the Listen directive to any number of specific addresses or ports
For example, if you run your main server on IP address 10.1.2.3 port 80, and a
virtual host on IP 10.1.2.4 port 8000, you would use:
Listen 10.1.2.3:80
Listen 10.1.2.4:8000
Listen and BindAddress are documented on the Apache site.
Configuring the Virtual Hosts
Having gotten Apache to listen to the appropriate IP addresses and ports, the
final stage is to configure the server to behave differently for requests on
each of the different addresses. This is done using <VirtualHost> sections in
the configuration files, normally in httpd.conf.
A typical (but minimal) virtual host configuration looks like this:
<VirtualHost 10.1.2.3>
DocumentRoot /www/vhost1
ServerName www.my-dom.com
</VirtualHost>
This should be placed in the httpd.conf file. You replace the text
10.1.2.3 with one of your virtual host IP addresses. If you want to specify a
port as well, follow the IP address with a colon and the port number
(example: 10.1.2.4:8000). If omitted, the port defaults to 80.
If no <VirtualHost> sections are given in the configuration files, Apache
treats requests from the different addresses and ports identically. In terms of
setting up virtual hosts, we call the default behavior the main server
configuration. Unless overridden by <VirtualHost> sections, the main server
behaviour is inherited by all the virtual hosts. When configuring virtual
hosts, you must decide what changes to make in each of the virtual
host configurations.
Any directives inside a <VirtualHost> section apply to just that virtual host.
The directives either override the configuration give in the main server, or
supplement it, depending on the directive. For example, the DocumentRoot
directive in a <VirtualHost> section overrides the main server's DocumentRoot,
while AddType supplements the main server's mime types.
Now, when a request arrives, Apache uses the IP address and port it arrived on
to find a matching virtual host configuration. If no virtual host matches the
address and port, it is handled by the main server configuration. If it does
match a virtual host address, Apache uses the configuration of that virtual
server to handle the request.
For the example above, the server configuration used is the same as the
main server, except that the DocumentRoot is /www/vhost1, and the
ServerName is www.my-dom.com. Directives commonly set in <VirtualHost>
sections are DocumentRoot, ServerName, ErrorLog and TransferLog. Directives
that deal with handling requests and resources are valid inside <VirtualHost>
sections. However, some directives are not valid inside <VirtualHost> sections,
including BindAddress, StartSevers, Listen, Group and User.
You can have as many <VirtualHost> sections as you want. You can
leave one or more of your virtual hosts being handled by the main server, or
have a <VirtualHost> for every available address and port, and leave the main
server with no requests to handle.
VirtualHost sections for non-IP Virtual Hosts
Non-IP virtual hosts are configured in a very similar way. The IP address that
the requests arrive on is given in the <VirtualHost> directive, and the
host name is put in the ServerName directive. The difference is that there
(usually) is more than one <VirtualHost> section handling the same IP address.
For Apache to know whether a request arriving on a particular IP
address is supposed to be a name-based requests, the NameVirtualHost directive
addresses for name-based requests. A virtual host can handle more than one
non-IP hostname by using the ServerAlias directive, in addition to the
ServerName.
null -
Apache Server not resolving virtual hostnames from an iPad
I am hosting multiple websites from a single IP address and have come across the following problem. If I access it from my mac, the correct website is displayed, but if I use my iPad the web site is not found and my default website displays instead.
Checking the access log I can see a clear difference between what is passed from a mac and an ipad but don't know how to fix it, any suggestions greatly appreciated.
The Mac sends this
www.parksurgery-hursleyrd-ppg.org.uk 81.138.225.73 - - [03/Oct/2013:00:15:11 +0100] "GET / HTTP/1.1" 200 4857 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0"
The iPad sends this
www.advtraining.co.uk 192.168.1.73 - - [03/Oct/2013:00:22:03 +0100] "GET / HTTP/1.1" 200 7847 "http://www.parksurgery-hursleyrd-ppg.org.uk/" "Mozilla/5.0 (iPad; CPU OS 7_0 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A465 Safari/9537.53"
the website I am trying to display is www.parksurgery-hursleyrd-ppg.org.uk
I just tried allocating different port numbers to the web site and that has the effect of the iPad displaying the correct website and the mac going to the default.
Any help much appreciatedA web browser sends the text that was entered in the address bar as part of the HTTP or HTTPS connection, irrespective of the IP address.
What your log is showing looks to be a refer from www.parksurgery-hursleyrd-ppg.org.uk to www.advtraining.co.uk, too.
If you're running OS X Server as implied by the choice of forum, make certain that your DHCP server for your private network is vending only the address of your own OS X Server DNS server, and that there are no references to any off-LAN DNS servers.
Also verify the contents and configuration of the local DNS server.
Also look at the refers and any rewrite or redirection rules within the Apache setup for the web sites. This for the rewrite and refer settings.
If you reference Google DNS at 8.8.8.8 and 8.8.4.4 as mentioned earlier, you will get the public IP translations, but — depending on whether your gateway device can "reflect" those references back into your local network via whatever you're using for NAT — you may or may not reach the intended host. You will generally not receive a 192.168.1.0/24 IP address as a translation from a public DNS server.
All that written, if you're running OS X Server, then you need DNS locally, and it's then common to configure the LAN to reference that server for all DNS. -
File not found error (404) from web browser
I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith -
Oracle 9I Database, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm
Maybe you are looking for
-
How can i delete old email addresses that autofill when creating new mail
Hi all Just passing on my ipad to my girlfriend, i deleted my mail account, all contacts etc but when she using her account types a new email, she sees addresses if anybody i have ever written too Can you pease let me know how i can delet this cache
-
Building a Simple JSF and Web Services App in JDeveloper 10.1.3 Preview
Hi I was trying out this example of JSF and webservices at: http://www.oracle.com/technology/products/jdev/101/howtos/jsfws/index.html Has anyone tried it before? I'm getting the following error: calling http://216.200.21.157:9090/soap WARNING: Unabl
-
Access KM using API as predefined user
Hello, dear experts! Currently I am going to use KM as file storage for my application. I want to prevent direct access to KM content for all users and allow them to upload and download files only using my application. The problem is: I use not conte
-
SB Audigy2 w/Vista: Creative Volume Control conflict with Windows Volume Control(sndvol.ex
Hi Everyone, I'm running Windows Vista on a Dell Dimension 8300 with a SoundBlaster Audigy 2(WDM) card. I have a few no-mind questions about how these things all work together: . After I installed Creative's Vista driver upgrade for the SB Audigy 2 s
-
Will new photos run in a slideshow displayed while shooting tethered?
basically the title says it all. I understand this functionality was included in Lightroom 4, but was dropped in the initial release of Lightroom 5. Did it make it back in during subsequent patches?