Aperture doesn't want to start due to "an error in  the opening of the database of my AP Library"

Hello,
I have a huge problem, I work a lot with Aperture and one day, without any previous crash, it then refused to start. When I click on the app icon an message comes right after the aplibrary loading to tell me that "an error in  the opening of the database of my AP Library occurred", the label of the windows is a "Warning" But there is not anything I can do but click on "quit the programm" . I REALLY need Help !  Will I loose all my pictures ? What Will happen to my aplibrary if i uninstall Aperture ? Is there any hope ? Will my actual APlibrary work on a different Aperture ?
Thanks in advance !
I'm working on it on a MBPro

Hello leonie,
This is what I see, when I try to open up my aperture :
I can't do anything else but quit...
Is there a crashlog with the error panel?
I'm sorry I don't understand exactly what you mean by that...
For your questions, I did not install any new/other software recently, just uploaded some music or photos via different platforms, from the internet to my computer. But I did not had the time to import them in aperture. And I did not use any maintainance program in the last year ! I guess that the very big majority of my aperture photos are JPEG, and it might be that there is a few PNG but that's it... And my (38,8 GO) library is located only on my MBP. And I have the 3.4.3 version of aperture
Thanks a lot for your help !

Similar Messages

  • Ipad doesn't want to start (french user)

    Hello
    My ipad doesn't want to start anymore.
    Everything was ok but when i have tried to start it, anything was wrong.
    The screen is dark and when i try to start it, there's only a light.
    I have tried to stay on "start button", but nothing appears.
    I have tried to update through a windows computer but i can't because there is a password on my ipad...
    Sorry for themistakes, but i'm french.
    Anyone can help me?

    i have this message in my computer: "itunes could not connect to the ipad because the ipad is locked with a password. Enter code so that the ipad can be used directly by itunes".
    But my ipad's screen still stay black

  • HT201406 Hi there, my iPad doesn't want to start anymore and it's fully charged

    Hi there my iPad doesn't want to start anymore and it's fully charged?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • [Solved]Last update broke my X. Now it doesn't want to start

    Hi everyone,
    I updated my 64 bit Arch today, and when i rebooted the X server didn't start. When I type in "startx" I am getting error message which says something like "Failed to load module nvidia (module requirement missmatch, 0)", but i can load nvidia module with "modprobe nvidia" then when I type in "startx" again everything is the same. How do I overcome this problem. I think I have been using this version of nvidia driver since 2011-08-17 but today my kernel version changed. Can this be the problem and what should I do in this case? I tried downloading the same driver from the nvidia site, so I can build it on my system with the new kernel but I ended up with the same error. I'm thinking of trying the new 285 BETA driver but probably this won't help either. Please give me some hints on what should I do. If this is not the proper place for my post, please excuse me
    Last edited by raxbg (2011-09-01 14:26:00)

    Thank you laloch, this did the job, but triggered another problem ->
    Buttons problem: http://img690.imageshack.us/img690/5505 … 11436r.png
    the buttons outlines don't show up and the background of the dock at the bottom is also broken and so is the windows titlebar. Is this somehow related to the IgnoreABI option or is the driver incompatible with the new kernel? I am using compiz btw... but everything elese seems to be working good(except that xbmc doesn't want to start).
    Moderator edit
    Please do not include images of this size in your posts: https://wiki.archlinux.org/index.php/Fo … s_and_Code
    Last edited by bernarcher (2011-09-01 12:43:54)

  • Bonjour keeps dying and doesn't want to start back up.

    Hey guys,
    On a bunch of our machines, after being upgraded to 10.6, bonjour appears to die completely. Sometimes I can get it to work again via CLI, sometimes I can't. All of our printers for our Macs are shared out via bonjour on a 10.5 Server. The majority of the machines are running 10.6.7, some are still on 10.6.6, but the problem has been around since at least 10.6.4, as far as I can remember.
    Any ideas why this is happening or how to fix it?
    Jason

    zaza2009 wrote:
    I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
    http://support.apple.com/kb/ts2570

  • MacBook Pro doesn't want to start up anymore.

    My MacBook Pro doesn't want to start up anymore.
    When I turn it on, it turns on, followed by a white/light grey screen with apple logo. After a while a loading wheel appears beneath the logo and a loading bar beneath it. The loading bar loads to about 1/5 and then disappears, leaving the computer stuck on the the white screen with the apple logo and the loading wheel.
    I tried to reset the PRAM, but it didn't help, it only got the startup sound to play when I turn the MacBook on.
    What can I do about this? Hopefully I don't need to lose my files.
    Thanks in advance,
    Emil

    lonelyplanet wrote:
    Seems like I have to use my Time Machine backup drive to reinstall the OS.
    No you don't.
    OS X can be reinstalled all by itself leaving the programs and files alone, provided the drive is working correctly.
    I'm not quite sure how to recover the files from Macintosh HD that I don't want to be deleted during this process.
    The TM drive is almost useless because you can't boot from it to recover your latest files with.
    That's why I gave the link  for the undelete boot drive, you create and boot from that, access your internal drive and grab files, then you can restore from TM or other things, like the repair list of fixes I gave you.
    Could you help me a little on how to backup files manually most easily?
    The problem is your machine isn't booting to grab the files.
    So you need to create a external boot drive, then you can access the internal boot drive directly and grab files out of your Music, Pictures, Movies, Documents folders (etc) to the external boot drive.
    Most commonly used backup methods
    Or is there a way to do this without deleting all of the files in my user folders on Macintosh HD?
    Yes, you can choose to create a
    Create a data recovery, undelete boot drive
    and recover your filesnow , or you can chose to try fixing the machine without recovering your files, but your taking your chances as we don't know how seriously wrong it is yet.
    If your willing to take a risk then proceed through this list, Step 1 - 8 etc., until the machine boots up.
    Step by Step to fix your Mac
    If the machine doesn't boot up then you need to create the external boot drive to get the files before proceeding with further steps.
    If this is too much for you, then call a local PC/Mac data recovery/repair service and they will handle it for a large fee.

  • I got gray screen on my imac and doesn't want to start up

    I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
    I have mavrick OS and my firmware password is enabled. ?
    Any help
    I tired to hold CMD+S or V when it starts up but doesn't help !!!

    zaza2009 wrote:
    I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
    http://support.apple.com/kb/ts2570

  • Reference to SR # 3-10116579281, Server Sun v240 doesn't want to start up

    Reference to SR # 3-10116579281, Server Sun v240 doesn't want to start up , it starts up for few seconds then shut down by itself 
    S/N of the server : FN64720058

    Thanks whiteychs very much, you direct me about these packages.
    I installed system again and choose only core packages and that connected to my wifi:
    iw
    iwlwifi-5000-ucode
    wireless_tools packages
    and after reboot on fresh install wifi starts working corectly
    thanks again

  • My mac mini doesn't want to start up

    Hi All
    my mac mini(no intel) doesn't want to start up.
    I tryed all what I need but nothing!
    The power buton doesn't work.I just use it for the net.
    Any idea for my problem?
    Thanks
    Message was edited by: jannhewi

    Does the mini show any sign of life at all? Have you checked the outlet to make sure it has power, and tried plugging the mini into a different mains socket?
    If the mains power is OK, and the mini is completely dead, then there are really only two possible problems: either the power 'brick' is faulty or the mini has suffered a hardware failure. If you can try your power brick with another mini, or borrow another power brick and try it with your mini, that would identify which.

  • My Ipod doesn't want to sync with itunes showing error (-48)

    My Ipod doesn't want to sync with itunes showing error (-48).. What can I do cause I can't add songs to the ipod....

    If you have not already, shut down your computer.  Do this to reset your iPod
    http://support.apple.com/kb/HT1320
    Start up your computer.  Run iTunes.  Connect iPod.  Try to sync again.

  • I have all of my music on my dad's apple ID (on my Macbook pro and iphone). I want to start using my own apple ID (the one that my iPhone uses for everything except iTunes store) as my iTunes apple ID - how do I do this without losing my old music?

    I have all of my music on my dad's apple ID (on my Macbook pro and iphone). I want to start using my own apple ID (the one that my iPhone uses for everything except iTunes store) as my iTunes apple ID - how do I do this without losing my old music?

    Authorize your computer with your Dad's AppleID.

  • HT4314 I have just got a new ipod touch but my game centre games are on the old one and i don't want to start them again, can I transfer the stage i'm at or anything?

    I have just got a new ipod touch but my game centre games are on the old one and i don't want to start them again, can I transfer the stage i'm at or anything?

    The progress for some games will transfer since some games synce progress to a cental server. For other games you will have to have the backup of the old iPod.
    You can restore from backup or access the backup. See:
    How to transfer game saves between iOS devices, without iTunes, and without jailbreaking | TUAW - The Unofficial Apple Weblog
    If you have acces to the old iPod yu can make a backup by connecting the iPod to the computer and right click on the iPOd under Devices in iTunes and select Back Up. Then restore from that backup.

  • Error - The request could not be performed due to an error from the I/O device

    Hello, 
    I have a Hyper-V server with a few virtual machines. 
    The host runs Windows Server 2012 R2 with Hyper-V. 
    VMs are Windows Server 2012R2 Generation 2 and Windows Server 2003 Generation 1. 
    All VMs running on VHDX on local host disks, no raid, no storage. Most VMs run on dedicated disks. 
    I am having the following error when I demand large amount of I/O on VMs:. "The request could not be performed due to an error from the I/O device" 
    This error happens when I run robocopy which requires large amount of writing, or on a SQL 2014 VM which also requires many reads and writes. 
    Whenever this error occurs, the replicas of the VMs require resynchronization and the MSSQL service stops. 
    Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs. 
    Is there any special configuration that must be done to avoid these errors? 
    Thank you! 
    Rafael

    Hi Eng.Rafael Grecco,
    >>Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs. 
    >>Chkdsk /r didn't return any error.
    It seems that it is not a hyper-v issue .
    I would suggest you to keep the driver up-to-date for your hyper-v host .
    In addition , here is a similar thread :
    http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/the-io-operation-at-logical-block-address-for-disk/23c32152-c2a6-4c6d-b229-95dc1470231a
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The cluster resource could not be brought online due to an error bringing the dependency resource

    hello
    i am tring to install sql 2012 sp1 clyutering on Windows server 2012. every thing is fine until a get this error
    The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)' online.  Refer to the Cluster Events in the Failover Cluster Manager
    for more information. i don,t have permision issue.
    any help for this please
    Kamel
    KAMEL

    Hello,
    Please read the following post:
    http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspx
     Try to run the cluster validation wizard too:
    http://technet.microsoft.com/en-us/library/cc732035(v=WS.10).aspx#BKMK_how_to_run
    More about this topic on the following thread:
    http://social.msdn.microsoft.com/forums/sqlserver/en-US/d217a651-1209-4300-904a-aefe0e05692c/network-name-not-going-online-during-install
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (...SQORA32.DLL).

    I recently upgraded from 10g to 11g and upon this upgrade, a website of mine stopped working.
    It is a classic ASP website.  I added a "testdatabase" page to the website to test the basic functionality of opening a connection.  I've pasted the testdatabase page below.  Anyways, upon running this page, I get this error:
    Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (Oracle in OraClient11g_home1_32bit, D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL).
    I have two other environments where I have done the same upgrade and the site works just fine.  I have compared all the IIS settings in my other environments to that of the one suffering from the error.  Also, in the IIS settings, I have made sure that "Allow 32bit" was checked.
    D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL is actually where this DLL resides. 
    I have also checked to make sure the environment variables are correct.
    The very first environment variable in the PATH setting is D:\app\oracleadm\product\11.2.0\client_1\bin; and there are no other references to oracle in the PATH environment variable.
    I have done a google search and I've seen that people also tell me to check ORACLE_HOME to make sure it's correct.  I've checked this in both of the working environments and there is nothing there.  There is also nothing there in the broken environment.  What should be there?  If anything?
    I don't know where else to look.  What could be causing this error?
    <%
    Option Explicit
    Response.Expires = 0
    Response.Buffer  = true
    Dim conn
    Err.Clear
    On Error Resume Next
    Set conn = Server.CreateObject("ADODB.Connection")
    conn.Open "DSN=RPS11;UID=FFXQM;PWD=ffxqm6prd$"
    If Err.Number <> 0 Then
    Response.Write (Err.Description & "<br><br>")
    Response.End
    conn.Close
    Set conn = Nothing
    End If
    conn.Close
    Set conn = Nothing
    On Error GoTo 0
    %>

    As a temporary solution, add the Administrators group to the IUSR and IWAM userids and see if that works. If it solves the problem, then it IS a matter of setting the users privledges correctly.

Maybe you are looking for