Apex 3.1.2.00.02: Item count exceeds maximum of 100.

Hello everyone!
I have a page with more that 100 items (110 to be exactly). If I add another item I cannot navigate away from the page without getting a 404 page "The requested URL /pls/apex/wwv_flow.accept was not found on this server.".
EDIT: I can navigate away (e.g. by using a tab) but not submit the page!
Is there any workaround (except splitting the page) for this problem? How about APEX 4, does the same problem/limitation exists there?
Thanks for your replies!
BR, Paul
Edited by: paulj on Aug 9, 2010 3:23 PM

Thank you Prabodh! At least I know now that I'm not alone with this issue.
I am using quite a lot of hidden items on that page, so I'm going to try to clean them up first and if that's not enough use application items instead, even though it's not the elegant way.
If anyone has suggestions on what else I could do, I would be more than happy to hear them!
BR, Paul

Similar Messages

V1.6 "Item count exceeds maximum of 100" is still in law?

Hello everybody,
I have warning "Item count exceeds maximum of 100" but it seems the page works and saves data properly nevertheless.
Should I still pay attention to this message in version HTML DB 1.6?

We have written two APEX applications and both have hit this limit. One app was a resume tracking system that tracked detailed resume data. We hit this limit and our only option was to break it up into two pages.
The second was a scheduler where the user wanted spreadsheet like functionality and had more then 100 cells that they wanted to see.
It is so silly to impose this limit unless there is a technical reason. Excel can manage 64k rows.........why is it 64k, because of a technical limit.
Let the limit be a setting that the APEX developer can change.
FREE APEX of the 100 ITEM LIMIT!!!!!

How to create Delivery from VA01 wich split on the basis of line item count

Hi Frnds,
I have this requirement where I have to split a single sales order into multiple deliveries whenever the line items count exceeds 10.
Kindly advice if there is any routine/ any exit for this OR any other soln to this...
Note : Splitting only takes place when the Line items count exceeds 10.
for eg : In VA01, for a sales order having line items
01, 02, 03, 04, 05, 06, 07, 08, 09, & 10 ---> One delivery
11, 12, 13, 14, 15............................ 20 ---> second delivery
Your help will be truely appreciated..
Thanks,
Kamal Sehrawat

These are called copying requirements. If you open VOFM, you will understand better.
The routine is a 3 digit number which corresponds to one particular scenario. There are many standard routines for each scenario. Ex : sales orders, deliveries, partners etc.
There are 2 cases:
1. copying the data from one scenario to other. Ex: orders to delivery, delivery to billing etc
2. Moving the data while creation.
You can choose anything which depends on your scenario.
To code, copy the routine and create a custom routine. Select the routine and Press F5 (Second Icon to see the source text) to write the code. You can write/modify the code in the copied standard include it takes.
If the standard routine is not suffice, you can also create a new custom routine which starts with 9XX.
You need to explore more to understand better.
Thanks,
Vinod

After using "consolidate library" to move my media to a NAS the items counts do not match. How do I find what is different the easiest way??

I wanted to move my itunes media on my imac to a NAS drive. I used the advance preferences to change the folder to the folder on the NAS. I then went to the "organize library" setting to consolidate.
When I compare the two folders, the music folders are different (807 items in the old to 798 items in the new), mobile applications are different (143 in the old to 153 in the new), Movies are different (321 items in the old, 324 in the new).
I think I already had the entire folder organized the way itunes wanted it. I'm not sure why the count would increase or to easily make sure I'm not missing any info.
Any suggestions?
Thanks.

Actually, a little off on the situation as I originally described.
Compared the old items counts to the new item counts:
1. The music folder increased in item counts.
2. Books is identical.
3. Mobile apps decreased by 10 on the new.
4. Movies decreased by 3.

Not able to create sub folder using SharePoint web service in large SharePoint document library (Item count view threshold limit)

We are trying to create folder & subfolder in a SharePoint document library using SharePoint default(dws) web service. Document library has unique permission as well as item level permission. It was working as expected. Once item count crosses
view threshold limit ( 5000) , create folder web method completes with an error and it creates a folder in SharePoint.
Request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:dws="http://schemas.microsoft.com/sharepoint/soap/dws/">
   <soapenv:Header/>
   <soapenv:Body>
      <dws:CreateFolder>
         
         <dws:url>Shared Documents/VenTest02092015v1</dws:url>
      </dws:CreateFolder>
   </soapenv:Body>
</soapenv:Envelope>
Response:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <CreateFolderResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/dws/">
         <CreateFolderResult><Error ID="2">Failed</Error></CreateFolderResult>
      </CreateFolderResponse>
   </soap:Body>
</soap:Envelope>
While trying to create subfolder under the above created folder service throws an exception saying
FolderNotFound.
Though we are able to create subfolder from SharePoint UI successfully.
Request
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:dws="http://schemas.microsoft.com/sharepoint/soap/dws/">
   <soapenv:Header/>
   <soapenv:Body>
      <dws:CreateFolder>
         
         <dws:url>Shared Documents/VenTest02092015v1/REQ-1</dws:url>
      </dws:CreateFolder>
   </soapenv:Body>
</soapenv:Envelope>
Response:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <CreateFolderResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/dws/">
         <CreateFolderResult><Error ID="10">FolderNotFound</Error></CreateFolderResult>
      </CreateFolderResponse>
   </soap:Body>
</soap:Envelope>

Yes, you're probably hitting the 5000 list item threshold (
http://sharepoint.stackexchange.com/questions/105937/overcoming-5000-file-document-library-limits ). I assume you can do it via the UI because you're probably logged in as an admin in which case, out of memory, the threshold is 20.000 items. You can extend
this limit, but you probably shouldn't.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

PS Elements 6 - Item Count

I have been using Photoshop Album 2 for a number of years and have just upgraded to PS Elements 6. I have approximately 29,000 photos stored. I am very happy with the upgrade and it bought all photos into PS Elements 6 nicely. In PS Album 2 there was an item count at the bottom of the screen that showed the number of photos I had stored, also when filtering it showed the number of photos that were available. My installation of PS Elements 6 does not have this but I have seen some screens shots on the Web that show this information, can somebody tell me how to enable this feature please.

I am currently trying to upgrade from Album Limited Edition 3.0 to Elements 6.0 and having no luck in transferring tagging and rating data. Importing the files works fine but no cataloguing data comes with them into Elements. I'm using the Get Files and Folders command, and then selecting files from the My Pictures folder on my hard disk, but Elements doesn't seem to recognise my Album tags as I don't get the expected prompt regarding which tags etc I wish to import. Did this all work fine when you carried out your upgrade and if so have you any advice?

Why is the item count in Photos for Mac significantly higher after upgrading from iPhoto?

Since upgrading to Photos for Mac from iPhoto, I've noticed the number of photos and videos in my library is higher than what I had before. Granted I imported some photos into the new app since then but taking that into account there's still a big discrepancy.
In iPhoto 9.6.1, the item count is 13,394 and I have since imported 95 new items into Photos for Mac. The total then should be 13,489 but Photos for Mac lists the item count at 13,626. That's a difference of 137 items.
Even taking into consideration that Photos for Mac might be including the 32 photos and videos that were in iPhoto's Trash (now Recently Deleted) folder, it still wouldn't account for 105 mystery items.
Does anyone have any insight into this difference in the number of items?

Since upgrading to Photos for Mac from iPhoto, I've noticed the number of photos and videos in my library is higher than what I had before. Granted I imported some photos into the new app since then but taking that into account there's still a big discrepancy.
In iPhoto 9.6.1, the item count is 13,394 and I have since imported 95 new items into Photos for Mac. The total then should be 13,489 but Photos for Mac lists the item count at 13,626. That's a difference of 137 items.
Even taking into consideration that Photos for Mac might be including the 32 photos and videos that were in iPhoto's Trash (now Recently Deleted) folder, it still wouldn't account for 105 mystery items.
Does anyone have any insight into this difference in the number of items?

Item count errors in Time Machine folder

Whenever I run Disk Warrior after Time Machine subject drive is full of errors like "item count" and "custom icon" errors in the Backups.backupdb folder on subject drive. Why is this happening?
jmf

Yes I have run Disk Warrior on the object internal drives, and they do not have any errors after successive checks with Disk Warrior. The errors are only on the external drive that contains the backup folder. Another consistent problem, is Disk Warrior wants to bless the "System Folder" on the backup drive which is an external data drive with no operating system installed.
jmf

APEX 4 Multiple Validation on one Item - Stop after single Failure

Hi
I'm trying out the fantastic new features of APEX 4 - Well done to the APEX team!!
Using page item validation, I've applied three validations ('cos that's how I think it works) to a page item.
1. Check if the value entered is numeric
2. Check if the value of the item is less than a stipulated minimum
3. Check if the value of the item is greater than the stipulated maximum
This works fine if the value entered is a number, and the min and max validations correctly return the message that the value is too small or large respectively.
But if I enter some text (non numeric), the the first validation correctly identifies that the value is not numeric, but I then get an ORA sql error complaining that the sql comparison of the value and the stipulated minimum fails - because the value entered is not numeric.
Is there any way of halting the validation process (i.e. skip validations 2 and 3) if number one fails?
Does this in any way relate to the validation option "AlwaysExecute"?
Thanks
Mike

Hi Mike,
you can set the condition at validation 2 and 3 to "don't execute when there are already inline errors".
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at
Training: http://www.click-click.at/apex-4-0-workshops

Get particular item count in sharepoint list using designer Workflow

How to get specific item count in sharepoint list using designer Workflow 2013.
For Example
Title Count
x 1
y 1
x 2
x 3

HI Thiru,
Can you please elaborate your problem. Is that Title and count are your list columns you want to fetch the value of count column based on title?
If my interpretation in not wrong, then it's not possible in SPD with the case you have mentioned in your question as Title='x' is having 3 different entries and SPD activity will always return first matching item and ignore the rest with warning message.
Regards,
Brij K

Folders' item count versus file count.

At the risk of making a comparison to Windows, it has a default behavior that provides more detailed information.
In the example below, with Mavericks and Windows 7 in Parallels, I "Get Info" and show "Properties" on the same Music folder, respectively.
As you can see, Windows breaks it down to Files and Folders, whereas Mavericks only shows an Item count.
Is there a setting to toggle in Mavericks to provide this level of detail?
Is there a third party plug-in that is recommended that can accomplish the same thing?

You get what you see.

Solution for invalid directory item count, startup disk corruption and regular crashes

Hi,
My late 2006 MacBook (10.6.8) has recently started crashing quite frequently. The screen becomes dark and a multi-language dialogue appears stating that the computer must be restarted with the power button. When this occurs any audio which was playing begins to repeat/skip and the computer goes into complete lockdown. This is now happening perhaps twice a day or more under moderate use.
This morning I ran 'Verify Disk' in Disk Utility and the process was stopped, stating that I had two 'Invalid directory item counts' and 'the volume Macintosh
HD was found to be corrupt'. Here is a screenshot of the Disk Utility window:
I have rebooted, run a software update and rerun the disk verification but to no avail. I also booted using CMD-S, advised by an older post in another forum which suggested using 'fsck -yf' which ran and stated that the disk had been repaired.
I bought the MacBook second hand from an Apple dealer but it didn't come with an install disc so I am unable to reboot and repair the disk like that.
My questions, therefore, are what does this mean for my computer in the future, will either of these issues cause me more trouble?
What can I do about it without the install disc
And are these issues directly related to the crashes? (I have been running the computer connected to an external drive and monitor - for watching movies)
Thanks in advance for any help you can offer!
Twitch

Not much you can do without an install disc which can be purchased from Apple Store > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
multi-language dialogue appears
That is referred to as a kernel panic. OS X: About kernel panics
Regardless of the kernel panics, you will still need the install disc to repair and reinstall OS X if necessary.
And are these issues directly related to the crashes? (I have been running the computer connected to an external drive and monitor - for watching movies)
Could be part of the problem.

Inbox search not returning item count for certain category's entered...

I suspect there's a BADI for this but at present the item count is not being displayed for two of the six category's that we have. In other words four of the Categories used do show the number of items returned, but two do not. Can anyone give me some pointers as what controls this?.
Jas

Originally Posted by Preston Stephenson
Is there only one item in your Mailbox folder?
Typically yes, I'm using an account to test with so I am controlling the contents of the inbox directly.
Originally Posted by Preston Stephenson
If there is only the one item, how was it created
(what was used to send the item)?
For all of the tests I've done with you so far, the items were created using the SOAP API. (sendItemRequest)
Since I didn't think of this previously, I went back and sent out an email using the GroupWise Web Access, as well as the GroupWise client. In both cases, I still did not receive the status with the email.
Originally Posted by Preston Stephenson
If you send an item using the GroupWise client,
what does that item look like?
Here is my SOAP request.
Code:
<ns3:getItemsRequest xmlns="http://schemas.novell.com/2005/01/GroupWise/types" xmlns:ns2="http://schemas.novell.com/2005/01/GroupWise/events" xmlns:ns3="http://schemas.novell.com/2005/01/GroupWise/methods">
<ns3:container>folders</ns3:container>
<ns3:view>subject status</ns3:view>
<ns3:count>-1</ns3:count>
</ns3:getItemsRequest>
Here is the soap response when attempting to retrieve an email from my inbox. The email is the only item in my inbox, and was sent using the GroupWise client.
Code:
<gwm:getItemsResponse>
<gwm:items>
<gwt:item xsi:type="gwt:Mail">
<gwt:id>53316A23.gw2012domain.gw2012po.100.1666178.1.25F.1@1:7.gw2012domain.gw2012po.100.0.1.0.1@16</gwt:id>
<gwt:sid>607</gwt:sid>
<gwt:container>7.gw2012domain.gw2012po.100.0.1.0.1@16</gwt:container>
<gwt:source>received</gwt:source>
<gwt:subject>ClientSent</gwt:subject>
</gwt:item>
</gwm:items>
<gwm:status>
<gwt:code>0</gwt:code>
</gwm:status>
</gwm:getItemsResponse>
Thanks,
Jon

Is there a means to get an item count within folders in Yosemite?

Is there a means to get an item count within folders in Yosemite?

Yes.
Turn on 'Show Status bar'

Project content changes not showing in item counts

[Aperture newbie question]
I can drag an album of images from one project to another but when I do this, the item counts for the two projects don't change. I'd expect that if I transferred an album of 100 images, then the item count for one project would DEcrease by 100 and the other INcrease by 100. This doesn't happen.
Is this normal, and if so, is it telling me that the images are not actually being moved from one project to another, so that if I were to delete the original "source" project, the transferred files would be lost?

Steve,
It is exactly normal - you haven't actually transferred any images. Albums DO NOT contain images, but rather pointers to the images, which actually live in Projects. So, no matter how many times you drag an album around to any number of locations inside or external to a Project, the number of images in each and every project remains constant.
BTW - deleting the images from the Project would probably be a Bad Thing for you to do....
Regards,
Calx

Apex 3.1.2.00.02: Item count exceeds maximum of 100.

Similar Messages

Maybe you are looking for