After using "consolidate library" to move my media to a NAS the items counts do not match.  How do I find what is different the easiest way??

I wanted to move my itunes media on my imac to a NAS drive.  I used the advance preferences to change the folder to the folder on the NAS.  I then went to the "organize library" setting to consolidate.
When I compare the two folders, the music folders are different (807 items in the old to 798 items in the new), mobile applications are different (143 in the old to 153 in the new), Movies are different (321 items in the old, 324 in the new).
I think I already had the entire folder organized the way itunes wanted it.  I'm not sure why the count would increase or to easily make sure I'm not missing any info.
Any suggestions?
Thanks.

Actually, a little off on the situation as I originally described.
Compared the old items counts to the new item counts:
1. The music folder increased in item counts.
2.  Books is identical.
3.  Mobile apps decreased by 10 on the new.
4.  Movies decreased by 3.

Similar Messages

  • HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

    I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
    i am getting the same error with my rf transmitter that i use in my car

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • HT201441 i just bough a used iphone but looks that it was found and i cant unlock it. its still link to the last user my question is how do i find out who is the last owner so i can unlock it

    i just bough a used iphone but looks that it was found and i cant unlock it. its still link to the last user my question is how do i find out who is the last owner so i can unlock it

    peeweenborre wrote:
    i just bough a used iphone .... its still link to the last user ...
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund,

  • TS3092 my wireless apple mouse works to move the arrow but will not scroll. how can I fix this?

    my wireless mouse moves the pointer but does not scroll, how can I fix this?

    Check the setting in System Preferences > Universal Access > Mouse & Trackpad tab > mouse options.. button > check scrolling.
    If you have an older mouse with the trackball, it might just need cleaning.  Turn the mouse over and rub the trackball vigorously on paper or microfiber cloth.
    Regards,
    Captfred

  • HT4059 Can I use Consolidate Files to move several different tracks into one Album?

    Can I use Consolidate Files to move different tracks into one Album?

    No, that's not what the Consolidate command is for. That command for getting all your track files into a single folder. To get all the tracks in an album to appear together, just Get Info on the tracks and make the album name all the same for each track. See:
    http://samsoft.org.uk/itunes/grouping.asp
    Regards.

  • HT5037 problems after using iPhoto library upgrader

    i can't open iPhoto library after using iPhoto library upgrader for a disk with a few pictures from an old iPhoto library on it. please help

    did you execture the library upgrader (in the APplications folder ==> utilities double click on it)? What exact problem are you haveing?
    LN

  • My itunes library has duplicated all of my music and would take me hours to delete one by one. What is a quick easy way to delete over 2,500 duplicates?

    My itunes library has duplicated all of my music and would take me hours to delete one by one. What is a quick easy way to delete over 2,500 duplicates?

    Apple's official advice is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • Everything is updated!!  iPhone, iPad, iTunes and MacBook Pro...  All I am trying to do is drag content from my iTunes Library to the devices.  iTunes gets stuck EVERY single time!  What usually triggers the Non-Sense is when I am adding a 2nd file!

    Everything is updated!!  iPhone, iPad, iTunes and MacBook Pro...  All I am trying to do is drag content from my iTunes Library to the devices.  iTunes gets stuck EVERY single time!  What usually triggers the Non-Sense is when I am adding a 2nd file!
    Why does iTunes SUCK??
    1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
    2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
    If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
    I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
    Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
    If you do a 2nd item the other items stop loading and never continue!!
    This is so BAD, I don't understand how they don't have this fixed yet!!
    Please tell me I am not the only one!!
    ...and If I am tell me how to fix it!
    Very appreciated,
    Joe

    Everything is updated!!  iPhone, iPad, iTunes and MacBook Pro...  All I am trying to do is drag content from my iTunes Library to the devices.  iTunes gets stuck EVERY single time!  What usually triggers the Non-Sense is when I am adding a 2nd file!
    Why does iTunes SUCK??
    1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
    2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
    If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
    I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
    Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
    If you do a 2nd item the other items stop loading and never continue!!
    This is so BAD, I don't understand how they don't have this fixed yet!!
    Please tell me I am not the only one!!
    ...and If I am tell me how to fix it!
    Very appreciated,
    Joe

  • After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    I have this exact same issue!
    I was on 2.0.1 running fine until late last week, noticed emails would not show up unless I had opened them in outlook. I thought I ran into a bug so I upgraded to 2.0.2. Now I can sync my email if outlook had them opened previously, but no calendar or contacts at all. I don't think my exchange admins will move me to another server, any other ideas?
    I love my iphone but if these features don't work I can't use it. I would appreciate any ideas.

  • How do I find what's using my hard drive space

    My wife has a 14" iBook. How do I find what's using all the hard-drive space? It only has a 40GB hard-drive (it's one of the older G3 models) but there isn't a lot loaded onto the HD. There is only 3GB space left. I've gone through every application and utility and document and every folder (document, movie, etc.) and the largest space-hogging folder is iTunes which uses 15GB because of the music. I can't find any singular folder that uses any sizeable HD space. I recently loaded Tiger so I don't know if Tiger uses the rest of the space or if it's just a combo of all the other applications.

    You could download and use WhatSize to see what may be eating up the space.
    With a 40 GB hard drive, you need to keep at least 6 GB free in order to avoid problems.

  • I installed the trial of Media Encoder CC but cannot find the imx30 preset. Where and how can i find and install this feature.

    I installed the trial of Media Encoder CC but cannot find the imx30 preset. Where and how can i find and install this feature.

    In the case of the trial mode, the license to MXF OP1a format as well as MPEG2 format are not activated if you install only Media Encoder only.  If this is the case, in order to activate those formats in the trial mode, please also install Premiere Pro, After Effects or Prelude and launch it at least once.  After this, re-launching Media Encoder should make MXF OP1a format available.

  • HT201210 I've updated my iPad to iOS6. Now saying connect to iTunes, which is saying my iPad in recovery & to restore to factory settings & all media & data will be erased. I DO NOT WANT THIS TO HAPPEN. What can I do?

    I've update my iPad to iSO6. Now saying connect to iTunes, which is saying my iPad in recovery & to restore to factory stting & all media & data will be ereased. I DOT NOT WANT THIS TO HAPPEN. What can I do?

    You have no choice now. Unless you want a brick for an iPad. After you restore to factory settings you can restore from your backup ..... And you do backup don't you? I would never update the iOS software without backing up first. After you restore from the backup, sync with iTunes again and you should be OK. Assuming that you do sync with iTunes .....
    Read this for info on how to restore from the backup.
    http://support.apple.com/kb/ht1766

  • HT1725 I've purchased a movie...Nebraska...I believe it completed downloading, but I can't find in any of the files.

    I've purchased a movie...Nebraska...I believe it completed downloading, but I can't find in any of the files.

    What did you download it on ? If you downloaded it on your Mac then it should be in the Movies part of your library. If you downloaded it on your iOS device then it should be in its Videos app. Is that where you've looked ?

  • How do I find, at-a-glance, the sample size used in several music files?

    How do I find, at-a-glance, the sample size used in several music files?
    Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
    Running 10.8.5 on an iMac i5.
    I did search through a couple of communities but came up empty.
    Thank you,
    Craig

    C-squared,
    There is no View Option to allow display of a column of sample size. 
    For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know).  For MP3 and AAC it is not available at all.
    You can roughly infer it from the files that are larger than expected for their time.
    99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority.  However, if you want to make a suggestion to Apple, use this link:
    http://www.apple.com/feedback/itunesapp.html

  • HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

    I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

    See this previous discussion:
    https://discussions.apple.com/message/16962474#16962474

Maybe you are looking for

  • Dbms_metadata.get_ddl returns text of table script but not the view

    Hi all I am using a DDL trigger like CREATE OR REPLACE TRIGGER SYS.log_ddl AFTER DDL ON DATABASE declare n_text varchar2(2000); begin if ora_sysevent='CREATE' and ora_dict_obj_type='VIEW' then select dbms_metadata.get_ddl (ora_dict_obj_type ,ora_dict

  • Out put determination for billing

    pls send me output determination procedure and also send screen shots ,pls send its urjunt

  • X:panelTabbedPane + Save button troubles

    I make changes into one of tabs. After this I click on Save button and get error message saying that fields on other tabs are empty. To avoid this error, I have to switch to ALL the tabs, making them active and initializing their fields and only then

  • Function group - Transport Failure

    Hi, We are importing the Fucntional Group into the quality systems. The import always fails because the transport is failing to import all the includes of the Function group. We can individually import the includes but this is not the solution in lon

  • Transferring My Verizon Number To ATT? (Any Trouble or Charges?)

    I just got the iphone and wish to keep my Verizon cell phone number. Does anyone know if this is any hassle and if any charges apply for this? Its late at night right now and can't activate the iPhone yet, i'm assuming I go do it at the ATT store rig