Apex and Jasper Reports error

Hi,
I try to print an Report using Jasper Report, whenever i try this, i am getting this error:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1029 ORA-24247: network access denied by access control list (ACL).
I have enabled Network Services but without Success
any Idee?
many thanks in advance
MDK.

Hi sivadas,
thanks for reply, i have done it using the code below, but still the same error
begin
begin
dbms_network_acl_admin.drop_acl(
acl => '/sys/acls/utl_http.xml'
exception
when others then null;
end;
dbms_network_acl_admin.create_acl(
acl => '/sys/acls/utl_http.xml',
description => 'TEST',
principal => 'FLOWS_030000',
is_grant => true,
privilege => 'connect'
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(
acl => '/sys/acls/utl_http.xml',
principal => 'FLOWS_030000',
is_grant => true,
privilege => 'resolve'
dbms_network_acl_admin.assign_acl(
acl => '/sys/acls/utl_http.xml',
host => 'localhost',
lower_port => 8080,
upper_port => 8080
end;
any Idee?
MDK.

Similar Messages

  • Apex and Jasper Report Integration

    Hi all,
    If someone was interested to try another way for pdf generation from an apex application can try our Report Chunker based on Jasper Report and now avaiable to download on :
    [http://sourceforge.net/projects/reportchunker/]
    The latest release includes an APEX DEMO APPLICATION.
    Any feedback will be welcome.
    Edited by: NeOGeO on 23-set-2008 1.28

    A few points here.
    Documentation:
    You need to state what permissions are required.
    eg create table, create sequence, create trigger, read/write directory.
    You should also mention the authentication method you use.
    Fortunately I could figure that out myself.
    Now bearing in mind I am your typical target audience, I have no knowledge of Jasper reports, and very little knowledge of java and xml. So I'm now stuck as I don't know what to use for the xml layout or how to write my report.
    At least provide an example xml layout, a example report and a link to where the reports cab be obtained.
    If we need to have anything on the system before we start (eg jasper reports) then this should also be stated (including minimum required version)
    Thats it. Unfortunately I can't go any further until I know more.

  • Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

    Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
    I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

    Hi,
    What’s your Outlook account? Exchange account or some other Internet email accounts?
    This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
    http://support.microsoft.com/kb/2231628
    If the issue persists, please create a new Outlook profile and add the email account to have a try:
    http://support.microsoft.com/kb/829918
    Regards,
    Winnie Liang
    TechNet Community Support

  • Opening new web page using servlet and jasper report. ?

    Hello,
    I am developing one small web application and implementing jasper report in it. I am using jasper report with servlet. Which is generating one pdf file and displaying in same browser. But I want to open this report in new browser. Which is only display that report window. I am trying it. response.setContentType("application/pdf");
                   /response.addHeader("Content-Disposition", "attachment; filename=" // this is basically for downloading pdf file.
                             + request.getParameter("D:/rnext/30-oct-2009/sms/web/jsp/Reports/allstudentsofwholecollege.jasper") + "");
          response.setContentType("application/pdf");
          response.setContentLength(bytes.length);
          servletOutputStream.write(bytes, 0, bytes.length);
          servletOutputStream.flush();
          servletOutputStream.close();In this code it is showing me attachement file of report.
    When I changed the response.addHeader(Content-Disposition", "inline; filename=" // this is basically for downloading pdf file.)
    It is opening in same window. Please help if you can. It is urgent. please help.
    Thanks in advance.
    Manveer

    Use target attribute with link you have placed on you JSP page. [Look Here|http://www.w3schools.com/tags/att_a_target.asp]
    Also remove Content-Disposition header if you want to open file in browser.
    In latest browsers it might be possible you will see new tab opened rather then whole new browser window, This depends on browser settings.

  • Jasper Reports error LINUX "sun.misc.Unsafe.ensureClassInitialized(Native "

    I have a servlet generating Reports using jasper reports. Its working perfectly on windows machine but on LINUX RHEL 4 SERVER it is throwing some error which is I am trying to tackle.
    TOMCAT :5.0.28
    JDK 1.4.2_08
    I installed the deprecated libraries for X-windows server.
    I think its JRloader which is throwing error but i have no clue how should I remove it.
    I hope someone knows this problem.
    error
    javax.servlet.ServletException
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:682)
         org.apache.jsp.Login.MCRServlet_jsp._jspService(MCRServlet_jsp.java:220)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    java.lang.NoClassDefFoundError
         sun.misc.Unsafe.ensureClassInitialized(Native Method)
         sun.reflect.UnsafeFieldAccessorFactory.newFieldAccessor(UnsafeFieldAccessorFactory.java:20)
         sun.reflect.ReflectionFactory.newFieldAccessor(ReflectionFactory.java:122)
         java.lang.reflect.Field.acquireFieldAccessor(Field.java:779)
         java.lang.reflect.Field.getFieldAccessor(Field.java:760)
         java.lang.reflect.Field.getLong(Field.java:398)
         java.io.ObjectStreamClass.getDeclaredSUID(ObjectStreamClass.java:1478)
         java.io.ObjectStreamClass.access$400(ObjectStreamClass.java:47)
         java.io.ObjectStreamClass$3.run(ObjectStreamClass.java:335)
         java.security.AccessController.doPrivileged(Native Method)
         java.io.ObjectStreamClass.<init>(ObjectStreamClass.java:333)
         java.io.ObjectStreamClass.lookup(ObjectStreamClass.java:253)
         java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:453)
         java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1521)
         java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1435)
         java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1626)
         java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1845)
         java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1769)
         java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
         java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
         java.util.ArrayList.readObject(ArrayList.java:554)
         sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         java.lang.reflect.Method.invoke(Method.java:324)
         java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
         java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1746)
         java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
         java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1845)
         java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1769)
         java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
         java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1845)
         java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1769)
         java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
         java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
         java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
         net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:88)
         net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
         ReportGenerator.ReportServlet.getCompiledReport(ReportServlet.java:210)
         ReportGenerator.ReportServlet.doPost(ReportServlet.java:55)
         ReportGenerator.ReportServlet.doGet(ReportServlet.java:39)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

    jaumev wrote:
    I have exactly th e same problem.
    Have someone solved it?
    Thanks in advancePlease, don't resurrect old threads. Start a new thread if you have a specific question. I'm locking this one.
    Kaj

  • Adobe Air and Jasper Report

    I am not sure whether this question belong in this forum..
    But If anyone has used jasperserver with Adobe air please help me..
    I have my application build in Adobe Air and one of the
    feature is to show the reports. I am able to see the report
    properly on adobe air when I pass the url through Iframe. But when
    I pass the URL with Output=pdf or when I click the pdf icon from
    jasper report, opens a new adobe air window with a black screen and
    this happens for all the different exports ie excel.... When I use
    the same application by triggering in IE, Firefox or Google chrome,
    it opens a new window or tab and shows me the pdf version.
    So I need help either to get me the pdf in that new adobe air
    window or open in the users deafult browser that pdf.
    PLEASE HELP ... Please contact me for the screen shots at
    [email protected] as I cannot attach the screen shots.. I REALLY
    NEED HELP SOON

    Does anyone has an application which has a option to open an
    excel file... if yes please contact me at [email protected]

  • Integrate jsf, jboss and jasper reports

    Hi there!
    I've a problem with integration jboss with jasper reports and jsf. Which jasper classes do I have to place on a server and what jboss files do I need to configure? How can I run jasper report from the jsf page? Any information on this subject will be very usefull.
    Thanx for help in advance.
    Adam

    Unless I have totally misunderstood your question, I think you have posted this question in the wrong forum. This forum is dedicated to developer questions about JSR 208 (Java Business Integration), a specification from the JCP that describes a service-oriented integration architecture. In this realm, integration means getting separate applications and messaging systems to interoperate, when they were never designed to do so. Your question sounds like you want to install particular technologies into jboss; this is a very different use of the term "integration".

  • JASPEr report error

    I'm trying to run a jasper report in my java application. I encountered this exception after clicking the print button. Pls. help me. Thanks.
    Exception in thread "AWT-EventQueue-0" java.lang.AbstractMethodError: javax.xml.parsers.SAXParserFactory.setFeature(Ljava/lang/String;Z)V
         at org.apache.commons.digester.Digester.setFeature(Digester.java:546)
         at net.sf.jasperreports.engine.xml.JRXmlDigesterFactory.configureDigester(JRXmlDigesterFactory.java:153)
         at net.sf.jasperreports.engine.xml.JRXmlDigesterFactory.createDigester(JRXmlDigesterFactory.java:791)
         at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:202)
         at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:167)
         at net.sf.jasperreports.engine.xml.JRXmlLoader.load(JRXmlLoader.java:151)
         at visionsoft.vshris.modules.leaves.a001.leavesettingspanel.AccrualPropertiesPanel.actionPerformed(AccrualPropertiesPanel.java:730)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at javax.swing.JComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)

    You might want to look on a Jasper Reports forum.

  • EP6.0 and KMC Installation and cf_installation.report errors

    Hi,
    I am installing EP6.0 on SUSE9 box.
    The OS level is as follows:
    Linux nadess01 2.6.5-7.191-smp #1 SMP Tue Jun 28 14:58:56 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux
    The java version is:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
    IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142ifx-20051125 (JIT enabled)
    J9VM - 20050524_1742_LHdSMr
    JIT  - r7_level20050518_1803)
    After installing the Portal I get the following messages in the cf_installation.report file
    A Configuration upload sequence has started at: Sat Jan 21 22:13:17 PST 2006
    Number of upgrades to be processed: 3
    com.sap.portal.supportability.isolde: non-fatal error(s).
    com.sapportals.portal.prt.service.soap: non-fatal error(s).
    com.sap.portal.runtime.config.component: non-fatal error(s).
    Please check the log file for more details.
    The upgrade sequence completed with some non fatal errors.
    I can connect to the Portal using the URL and there are no *err files in the following directories
    ../../WEB-INF/deployment/
    ../../WEB-INF/deployment/pcd
    ../../WEB-INF/deployment/pcdContent.
    So the question is why am I getting these messages?
    After the Portal installation I am trying to install the KMC module. The installation errors
    ERROR 2006-01-21 23:32:46
    CJS-00320  Portal Deployment Monitor Error:  The Portal Configuration Upgrade report file (/usr/sap/NED/JC00/j2ee/cluster/server0/cf_installation.report) does not exist. Contact your local support center.
    There is a cf_installation.report.bak file that exists. I removed the .bak extension according to a forum reply. The installation moves on and I get the following messages
    WARNING 2006-01-22 00:24:49
    Portal Deployment Monitor Warning: Nothing to monitor. No remaining EPT files found.
    WARNING 2006-01-22 00:24:49
    Portal Deployment Monitor Warning: Nothing to monitor. No remaining PAR files found.
    completes succsessfully. BUT there are NO files with
    com.sap.ib.bi.*
    com.sap.km.*
    com.sap.netweaver.*
    com.sap.workflow.*
    installed in the pcd and pcdContent directories.
    I have tried the installation many times but don't know where the problem is.
    I connect to the portal but get error messages when try to access the System Configuration -> Content Management.
    I would appreciate a resolution to this problem.

    Hi Javed,
       Seems there is some problem with Linux x86_64 systes. Please check SAP Note 874092. It may provide some idea.
    Regards,
    Siva
    P.S: Award points if you find this useful.

  • BitLocker Administration and Monitoring Reports Error

    When attempting to run Reports through the Administration and Monitoring console I receive the following error...
    "The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)"...
    What or how can I verify the connection between the report server and report server database (SQL Database Server) is occurring. Also, which logs can I review to determine what's causing this error...

    Hi,
    go to your Report Server and check if there is an MBAM Folder. Within that Folder you can check the DataSource and verify the target db and Connection Details.
    /Oliver 

  • Quicktime player opens about 50 videos and then reports errors

    The last time I was using Mountain Lion's QuickTime player, I accidentally selected about 90 files so now if I try and open the player, it wants to open all those files each time. Then it says it can't open them because they are in some format not supported. I have to force quit or else close each file. I tossed out all the QuickTime preference files I could find in the library but that didn't help. I even tried dragging a video to the QT app hoping it would forget the other files but it tried to open them all again as well as that video. Once again, I had to force quit. How can I make QuickTime Player forget all those files and just open up?

    The last time I was using Mountain Lion's QuickTime player, I accidentally selected about 90 files so now if I try and open the player, it wants to open all those files each time. Then it says it can't open them because they are in some format not supported. I have to force quit or else close each file. I tossed out all the QuickTime preference files I could find in the library but that didn't help. I even tried dragging a video to the QT app hoping it would forget the other files but it tried to open them all again as well as that video. Once again, I had to force quit. How can I make QuickTime Player forget all those files and just open up?
    This is what happens when you fall into bad habits and fail to "clean up" after yourself before closing the app. You can try opening the QT player and immedialy try holding down the "Option/Alt" key while selecting the "Quit and Close all Windows" File menu option. If the player can "release" the files before being caught in an infinite loop or similar "read to EOF" routine, then you may be able tp "clear" the "re-open" file referencing and prevent having to "force" a quit exit from the app. Otherwise you will have to turn on the "System Preferences/General/Close windows when quitting an application" option and see if that works when forcing an application to quit.

  • Jasper report with Struts2 and hibernate.

    Hey all!
    I'm new to Struts2, Hibernate and jasper report. I want to make a report using those tools. Can anybody pls help me by providing a step by step process for it?
    I'm using eclipse Ganymede IDE. And want to view report on page with two search criteria as start date to end date and an option choosing.
    Can any body pls response me for this?

    Yes you can, you'll need to create a new library in JDeveloper with the Jasper reports JARs.
    See: Re: JasperReport with Jdeveloper

  • Vista got corrupt after power failure. sfc reports error and Event log service is unable to start itself.

    Hi,
    After a sudden power failure, I guess vista file system is corrupt.   I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself,  when I start IE, it closes automatically , 
    Norton antivirus does not start itself.  and so on.
    After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
    "Windows resource protection found corrupt files but was unable to fix some of them"
    Unfortunately I am unable to upload log file, so I am pasting CBS.log content here....   Please advice.
    Some parts of logs are removed due to limit of 60000 characters.
    Please advice.
    Regards
    2014-07-07 14:55:57, Info                  CBS    Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
    2014-07-07 14:55:58, Info                  CSI   
    00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
    2014-07-07 14:55:58, Info                  CSI   
    00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
    2014-07-07 14:55:58, Info                  CSI   
    00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
    2014-07-07 14:55:58, Info                  CBS    NonStart: Checking to ensure startup processing was not required.
    2014-07-07 14:55:58, Info                  CBS    NonStart: Windows is in Safe Mode.
    2014-07-07 14:55:58, Info                  CSI    00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
    phase = 0, pdwDisposition = @0x2dfe70
    2014-07-07 14:55:58, Info                  CBS    NonStart: Success, startup processing not required as expected.
    2014-07-07 14:55:58, Info                  CSI    00000005 CSI Store 4780952 (0x0048f398) initialized
    2014-07-07 14:56:03, Info                  CSI    00000006 [SR] Verifying 100 (0x00000064) components
    2014-07-07 14:56:03, Info                  CSI    00000007 [SR] Beginning Verify and Repair transaction
    2014-07-07 14:56:10, Info                  CSI    00000008 Repair results created:
    POQ 0 starts:
         0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
        1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
        2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
        3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
        4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
        5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
        6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
        7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
    2014-07-07 14:56:10, Info                  CSI    121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
    POQ 0 ends.
    2014-07-07 14:56:10, Info                  CSI    00000009 [SR] Verify complete
    2014-07-07 14:56:11, Info                  CSI    0000000a [SR] Verifying 100 (0x00000064) components
    2014-07-07 14:56:11, Info                  CSI    0000000b [SR] Beginning Verify and Repair transaction
    2014-07-07 14:56:19, Info                  CSI    0000000c Repair results created:
    POQ 1 starts:
    POQ 42 ends.
    2014-07-07 14:58:29, Info                  CSI    000000b1 [SR] Verify complete
    2014-07-07 14:58:30, Info                  CSI    000000b2 [SR] Verifying 100 (0x00000064) components
    2014-07-07 14:58:30, Info                  CSI    000000b3 [SR] Beginning Verify and Repair transaction
    2014-07-07 14:58:38, Info                  CSI    000000b4 Repair results created:
    POQ 43 starts:
         0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
        1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
        2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
        3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
        4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
        5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
        6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
    POQ 43 ends.
    2014-07-07 14:58:38, Info                  CSI    000000b5 [SR] Verify complete
    2014-07-07 14:58:38, Info                  CSI    000000b6 [SR] Verifying 100 (0x00000064) components
    2014-07-07 14:58:38, Info                  CSI    000000b7 [SR] Beginning Verify and Repair transaction
    2014-07-07 14:58:43, Info                  CSI    000000b8 Repair results created:
    POQ 44 starts:
         0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
        1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
        2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
        3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
        4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
        5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
        6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
        7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
    2014-07-07 14:58:43, Info                  CSI    -ms"
        8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
        9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
        10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
        11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
    POQ 107 ends.
    2014-07-07 15:08:01, Info                  CSI    00000213 [SR] Repair complete
    2014-07-07 15:08:01, Info                  CSI    00000214 [SR] Committing transaction
    2014-07-07 15:08:01, Info                  CSI    00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
    2014-07-07 15:08:01, Info                  CSI    00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
    2014-07-07 15:08:01, Info                  CSI   
    00000217@2014/7/7:09:38:01.060 CSI perf trace:
    CSIPERF:TXCOMMIT;5
    2014-07-07 15:08:01, Info                  CSI    00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction 
    have been successfully repaired
    2014-07-07 15:15:58, Info                  CBS    Scavenge: Package store indicates there is no component to scavenge, skipping.
    

    Hi,
    First, I would suggest you using last known good configuration:
    Using Last Known Good Configuration
    http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
    if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099/en-us
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • Jasper reports and bpel?

    Is it possible (somehow) to generate pdf document using jasper reports (or any other framework for that matter) from bpel process?
    Can anybody guide me to any tutorial or something that adresses this kind of "problem"?
    I'm quite a newbie in Oracle BPEL and SOA. Maybe there is already some mechanism for doing this?
    Thanks in advance :)

    I want to generate pdf file based on xml based result from bpel process and save that file to a file system.
    Creating web service for that purpose is, in my opinion, quite elegant solution. I'll go with that for now since I know web service and jasper reports technologies.

  • Jasper report problem in stretch fields

    Hi All
    i am making report in ireport and jasper report, by design and code.
    The height of the fields is not limited , that mean i can put in it a large sentence or a small one. So i use the property "Stretch with overflow" (or textField.setStretchWithOverflow(true); in code )
    the problem that i face is : the report i got is work fine but some tall sentences are splited in more than a page and the problem here that i don't know why it splited when there is a plenty of blank space in the page, when the other sentences is using this blank.
    in the end i am hope that i explain the problem well... so help me please in this issue.
    BEST REGARDS

    So i tried the same in Java.As a stand alone java code? or as a code in your webapp? Please make sure the required jar files are in your web-inf\lib

Maybe you are looking for

  • Determine the number of records in a file

    I want to analyse record types from a large input file and so far have managed to extract different groups and created the relevant files. All I want to do now is count the number of records in each file so I can produce a report showing the differen

  • Best option for making video podcast tutorials using a tablet

    I am not very familiar with the use of tablets but I would like to be able to produce tutorials for my students that look like this: http://www.screencast.com/users/pretzej/folders/Jing/media/93ef7f12-2912-454c-87 d1-701b618e250f Would Inkwell work?

  • SOA suite 11g and Windows 7

    Hi All, I have purchased a new HP Pavilion dv7 -4053cl It comes with Windows 7 Home edition. If I download Oracle SOA suite 11g and Weblogic 10.1.3., will it work on Windows 7 Home ? Thanks, p

  • Installing Oracle AS R2 (10.1.2.0) on RHES 4.0

    To run the Installer is necessary modifier the file /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant) to Red Hat Enterprise Linux ES release 3 (Nahant) and don't care inclusive mantain the other words, because if OUI finds e.g. digit

  • I lost my 4s, how to find it if I only have Serial No and IMEI/MEID ?

    how can i find it if i only have the part No, serial No, and imei/meid No? hope someone can help me i lost it in beijing