Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Exchange server 2013 mail send and received problem

Hi Support,
I have Install Exchange server 2013 and create mail box and local send received locally but days back i have not able to mail send and received. what setting are required for user mail send and received locally. and how to create mx and txt record for my
domain.

Hi,
According to your description, I know that the Exchange server can send/receive internally at beginning, however doesn’t work now. Please correct me if there is anything misunderstand.
Great checklist from S.Nithyanandham. Additionally, how about sending/receiving via OWA? And any error messages when can’t send and receive?
Please make sure the Message Tracking has been enabled and run following command to output track log and check detail information:
Get-MessageTrackingLog |FL > "c:\Track Search.txt"
For more information about Message Tracking logs, please refer to below article:
http://technet.microsoft.com/en-us/library/bb124926
If you want to communicate externally, you need to contact ISP to register DNS MX record.
Best Regards,
Allen Wang

I am trying to set up my daughter's iTouch. I am connected to our Wi-Fi, and have confirmed this in Settings, but when we try and open any webpage we receive the message that page cannot be opened because not connected to the Internet

I am trying to set up my daughter's iTouch. I am connected to our Wi-Fi, and have confirmed this in Settings, but when we try and open any webpage we receive the message that page cannot be opened because not connected to the Internet. I have already re-set the iPod, have shut-down and restarted, and told the iPod to "Forget Network". please help - i am going bananas!

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

I receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.

I performed a clean install of Lion, then upgraded to Yosemite. Now, i am trying to restore files and programs from my backup in my time capsule but when i connect to the backup folder i receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.
I previously had mavericks installed and was able to backup and restore just fine. I do believe that within the time since i last performed a backup or restore there was an update for the time capsule that i ran using my iPhone. I need a solution to this issue.

Yosemite can take a very long time to index the backup.. and it seems to be impossible in my own testing to get back beyond the latest one.
If you cannot manage a migration.. which I guess is what you are trying to do.. see if you can do a full restore to a USB drive plugged into your computer.

Please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started

please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started

http://support.apple.com/kb/HT1923
uninstall and reinstall
there is a complicated way to work with just the mobile device support but its simpler just to uninstall itunes and related components and then reinstall itunes
ur music will be fine, u will just lose the playlists. but ur mobile device support will be working again.

How to build an E-mail sending and receiving application in Windows Azure?

I am a beginner Windows Azure Developer and I am trying to build applications like Gmail, Hotmail, YahooMail, etc. However, I am unable to build such an application. I have come to know how to send e-mail using SendGrid. Even, I don't know how to configure
to receive e-mails. Please help me on how to develop such an application in windows azure.
Regards

hi Yash,
Thanks for posting!
About how to send mail using sendgrid, I suggest you could try this tutorials firstly via smarx's blog(http://blog.smarx.com/posts/emailtheinternet-com-sending-and-receiving-email-in-windows-azure).
It supplied the method and code sample you could download . You may need create a listener to listen on the right port on workrole always.
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User mail send and receive restrictions

Hi there,
Is it possible to restrict multiple user send and recieve function on outlook through exchange to between certain times in the day? For example the users may not send or receive mail between 8:00am an 10:00am to force them to concentrate on another task.

Hi,
As Li Zhen suggested, you can set the send and receive quota using the cmdlet below on 8 am, and configure the send and receive quota back to normal on 10 am.
Set-Mailbox -Identity xxx -IssueWarningQuota xxx -ProhibitSendQuota xxx -ProhibitSendReceiveQuota xxx -UseDatabaseQuotaDefaults $false
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Apple Mail send and receive problems, Network Solutions

Hello Everyone,
I'm currently facing a problem with a company email account that we have with network solutions.
NSmail Pro (IMAP) that is configured with apple mail. Here are the settings that i have:
Incoming mail: mail.(company.domain).com
Port: 110
SSL: No
Outgoing mail: smtp.(company.domain).com
Port: 2525
SSL: No
Auth: Password
Whenever i'm at the office, I can send and receive emails without any problems (Using mail app), but when i'm at home i can't receive emails nor send one.
I'm wondering if this has something to do with the Mail application, cause i can access the email using the webmail on a browser without any problems (either at home or at the Office).
Any thoughts from our experts?

I'm guessing that when you are at the office, you are probably accessing a company network and the company mail will only work with those settings on the company network. You may need to discuss this with your IT department at work to see if it need a different configuration for outside access.
The fact that it works at work and not at home indicates a that it surely an issue with the connection setup.
Assuming that you are accessing it through wi-Fi at both locations, do you have different wi-Fi connections set up on you Mac in Network Preferences, or is it the same wi-Fi connection used for both? In other words, do you have a specific wifi setup on your computer for connecting at the office?

Using Mail, sender and receiver addresses getting mixed.

I'm using the mail app for my company gmail account (@companyname.com) we have them set up for the whole office.
Well what appear to be normal when I write an email and sent it to the desired person, it will later say on their screen or mine that it was sent to entirely different people in my contacts. While the right people still receive the email I indented to send to them they or I see the wrong addresses. Making things very confusing as you can imagine. So for instance I'll send out an email to a client but will say that it got sent to two of my coworkers, however it didn't actually get sent to them, it got sent to the client but just says it went to the wrong people, furthermore on their screen it will say it was sent from a different person as well. Recently got a new macbook so I had to reset up my mail account and it seemed a little dodgy at first so I'm wondering if some got set up wrong and I need to clean out the whole mail accounts, wipe cache?
Please advise. Thank you!
Nate.

adeelarifbhatti wrote:
please can any one tell me how can i log that which user has sent the mail to which user .Messaging Server already provides this information if you add the "logging" keyword to the defaults channel definition in the imta.cnf file e.g.
23-Jun-2008 10:00:58.98 tcp_auth ims-ms EEA 8 [email protected] rfc822;[email protected] recipient_username@ims-ms-daemonIf your users are using SMTP Authentication, you should also add "LOG_USERNAME=1" to the option.dat file to have the smtp authentication username added when used.
Regards,
Shane.

Mail sender and receiver scenario

Hi All,
I want to create one MAIL-MAIL scenario,in which I want to send mail message from one mail server and receive the transferred massage in same mail server.
But I am confused regarding XI's inbound and outbound message for this scenario.
What should be my outbound and inbound message type in this scenario?(if i want just to send one line from my mail)
And who will trigger this mail transfer?Do I need to create some settings on mail server?
please help me.

Hi Michal,
>>it will have to look the same as your XML message that you will send via mail
Can you elaborate on this?
Means will it refer to the mail content in my my email?
bcoz I searched on help.sap i got following payload format:
<?xml version="1.0" encoding="UTF-8"?>
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<Subject>Subject</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Reply_To />
<Content_Type>text/plain</Content_Type>
<Content>
This is the content.
</Content>
</ns:Mail>
Please help me.

Mail send and receive

Hi All,
We are trying to read mail from our MS exchange server.
When we execte the transaction, its throwing the error : connection refused.
But when we are trying to send mail, its not throwing any error and mail is sent successfully.
Are we missing any thing or there must be some firewall issue?
regards
Rupesh

Rupesh,
I agree with Rick. Sending the e-mail successfully means that the SMTP configuration is OK, and not receiving means POP3 settings are the issue. I would validate the "MailServer", "Port", "MailAccount", and "MailAccountPassword" properties you used in the Read Mail action with your administrator.
Regards,
Kevin

I have downloaded an update to Firefox, but when I try to load it I get this message, "The operation cannot be completed because you do not have sufficient privileges for some of the items" and I have no idea what it is talking about or how to change it.

The previous version of Firefox is still on and operational. I get this message when I try to drag the Firefox icon to the application file icon. Since this is my computer, and I am the administrator, I don't know what privileges I lack, or on which items. If there is a way to correct this I would like to do so and activate the new version. It looks like the new version is 7.0.1 for Mac OS. This happens everytime I try to load the new version by dragging the icon.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Mac Mail send and receive

Hi,
I have recently upgraded to Mountain Lion. My question is how does Mac Mail receive emails? I am connected to our Exchange 2007 server. I also have Outlook 2010 client running side-byside in Unity mode using Vmware. So now everytime I receive an email Outlook gets it first and about 2-5 minutes later Mail receives it. In order to receive it earlier I have to manually click on the Synchonise mail menu item.
Is there a way to manipulate the behaviour of Mail so it synchronises a bit sooner?
Many thanks,
vnayak.

How is this an iphone question?

Help? iPhone4 does not always dial out, receive calls or send and receive texts.

My problem started about 8 days ago. I did nothing to my phone, changed no settings, yet last Tuesday it just stopped sending texts for a period of about 4 hours. I could not dial out. Basically, my phone was useless. I also noticed the 3G was not working. It would connect to my home wifi network but nothing else. It started working that night. During this past week, it has done this same thing off and on again. There is no particular pattern. The rest of my family have 3 phones (not Iphones, but basic cell phones through Verizon) and they have not had one issue. During my "blackout" periods, I will have them dial my phone and it will ring on their end for me, but my phone actually will not ring. What gives?? Also, when I am not able to receive or send texts, when my phone starts working again, I will receive all texts I could not get all at once. So, to me this strongly sounds like a Verizon issue within their network. Please help??

Hi Elizabeth Cara, I like to help with the issues with your iPhone 4. The details you provided were great. However, I like to ask a few more questions. How often do you restart your iPhone 4? Are you mainly on the indoors when these issues occur? Even though you did not make any changes on your iPhone 4, it is good to double check make sure they are all set properly. Here are a two suggestions you can use. One is to reset your network settings via this link http://tinyurl.com/dxuf54m. Another suggestion is to do a ensure your Wi-Fi is disabled on your iPhone 4. Here are the steps http://tinyurl.com/bpekjpj. Give these options a try. Retest your iPhone 4 after each suggestion seeing if either helps with the issues reported.
Thanks,
EdW_VZW
Follow us on Twitter @VZWSupport

Present version is 3.0.3 downloaded 3.6.13. When trying to load the upgrade received error message -- "The operation cannot be completed because you do not have sufficient privilages for some items." --What is the solution to this ?

The computer is
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Similar Messages

Maybe you are looking for