Apex and the Oracle Change Management Pack

Hi everyone
I'm looking for some feedback from anyone that has used the Oracle Change Management Pack (CMP) with an Apex development (or is it really only for Oracle Apps)?
Could the CMP be used against the APEX_04000 schema to sync a Dev environment with Test and Production? If so, this would nicely lead into an Agile approach to development, even perhaps Continuous Deployment :)
I'm concerned that I can't find anything on the web about Apex and the CMP, so I suspect it can't be done :(
Any comments gratefully recieved.
Shunt

You are going to have to provide a lot more information for anyone to help you from the basic ... like in what version ... to the specific ... what functionality do you want?
In general none of the "packs" run any code not in the database in the form of built-in packages. For example much of the functionality of OEM Grid is implenented in DBMS_ADVISOR, DBMS_MONITOR, DBMS_SERVER_ALERT, etc.
But without specific questions no specific answer is possible.
You can find demos of the above referenced packages here:
http://www.morganslibrary.org/library.html

Similar Messages

  • How to install Oracle Change Management Pack for 11g database.

    Hi,
    I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
    Oracle Configuration Management Pack
    Oracle Data Masking Pack
    Oracle Diagnostic Pack
    Oracle Tuning Pack
    using following URL
    http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
    Regards
    DBA.

    As far as I could understand, this is a part of Oracle EM/Grid installation:
    The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

  • How I know which manageability tools(Oracle Change Management Pack,Oracle C

    Dear all,
    How I know which manageability tools(Oracle Change Management Pack,Oracle Configuration Management Pack,Oracle Diagnostic Pack,Oracle Tuning Pack, etc.) are installed on my oracle databases? Is there v$view to look at? Thank you in advance for your help.

    The usual method is described in http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF

  • Managing Change With Oracle Change Management Pack

    I have an oas v4.0.8 is running under RHlinux 6.1. however, I have a long list of ip numbers need to input in one group. under the VI editor's limitation, i can't have all the ip number in one group. so I need to seperate them into couple groups.
    so in my svwww.cfg looks like the following:
    [IP]
    ipg4: 144.144.144.22
    ipg5: 132.233.211.2
    [AppProt]
    /test/ = Basic(radmin) & IP(ipg4,ipg5)
    Then, I did the "owsctl reload" , the messages reflect from my screen tells me "admin", "www", and other stuff are started. however, I check the svwww.cfg file, and it tells me
    "Error: The data passed to security module "IP" for protecting "/test/" was invalid"
    so is there anyone has any better idea?
    Thanks

    Working with the Oracle Enterprise Manager group to integrate closely with their monitoring solutions has been one of the most important advantages of joining the Oracle team. As our customers have started to use CRM more deeply as part of their business processes, CRM has quickly become Mission Critical, with 24/7 uptime requirements. Furthermore, as CRM becomes further integrated into the enterprise, knowing the status and health of the connections to multiple backend systems becomes evermore crucial.
    Through our partnership with the Oracle Enterprise Manager, we aim to support true Enterprise-class CRM. We are the only solution out there with over six million live users, and we are leveraging the knowledge gained from those customers in our Enterprise Manager integration. With the real-time monitoring and diagnosis that Oracle Enterprise Manager provides, we simplify the process of managing sophisticated CRM implementations which span organizations and systems. If you have a Siebel implementation with four servers or more, or with integrations to several systems, you owe it to yourself to check out Oracle Enterprise Manager.

  • Change Management without Oracle Change Management Pack

    Hello,
    is there a possibility to define a change management process without having access to the enterprise manager?
    The administration of the databases in our company is done by an outsourcing partner. So the developers can't access the enterprise manager.
    siret

    You are going to have to provide a lot more information for anyone to help you from the basic ... like in what version ... to the specific ... what functionality do you want?
    In general none of the "packs" run any code not in the database in the form of built-in packages. For example much of the functionality of OEM Grid is implenented in DBMS_ADVISOR, DBMS_MONITOR, DBMS_SERVER_ALERT, etc.
    But without specific questions no specific answer is possible.
    You can find demos of the above referenced packages here:
    http://www.morganslibrary.org/library.html

  • Oracle Application Management Pack for Siebel

    Does anyone on this board have any experience with the Oracle 10G Grid Control software and the Oracle Application Management Pack for Siebel. The installation of the Oracle Enterprise Manager Grid Control with the Siebel Management Pack has been successful on the Windows 2003 servers and we can view a list of the servers within Oracle's OEM tool. The problem I am facing is when I try to add a Siebel Enterprise. I receive the following error when I attempt to add a Siebel Enterprise.
    An error occured while adding Siebel Enterprise.
    Credentials - Missing Credentials for host <HOST_NAME>
    All of the credentials have been added properly. Does anyone have any experience or success using this product? If so please reply with feedback.
    .

    Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
    Btw, I take that you are stuck in the step in which you:
    - Click the "Add Enterprise" button to add the enterprise
    - Fill in the 7 parameters
    - Click Ok to start the discovery process
    Which release of Siebel and Enterprise Manager are you using?
    Chung

  • EM10gR2 Grid Control / Change Management Pack does not support TYPE objects

    I wonder any Oracle EM10gR2 Grid Control users, implementing Oracle Change Management Pack, have used it for the release and proper packages management.
    Issue1 - On an EM console / Web GUI the DDL comparison and synchronization is not supported at all. Implementing it @ customer it appeared that we have to install a 10g Java Client in order to use the code comparison and sync functionalities.
    Issue2 - and this is more serious - it appears that even with Java client in use, you cannot compare or sync objects related to TYPE or TYPE BODY data types. The comparison simply hangs.
    Asked help from support, they mentioned an ER from 8i and logged a new ER for 10g/11g. That is surprising especially as the doc (http://download.oracle.com/docs/html/A96679_01/toc.htm) about code comparison does not exclude the TYPE objects from the supported options.
    Any fellow DBA running to a same problem? What solutions & recommendations might you have?

    Hi Mugunthan,
    Can you provide links to any tutorial or example (screenshots) of using Setup Manager to transfer something between two environments (say Users or DFFs)?
    Thanks,
    Gareth

  • Applications Change Management Pack  3.1 is now available

    E-Business Suite Applications Technology Group has recently released Application Change Management Pack (ACMP) Release 3.1 and Application Management Pack (AMP) Release 3.1.
    As you might be aware, Application Change Management Pack is Oracle's offering for customers to monitor and manage Oracle E-Business Suite changes. Application Change Management Pack provides a centralized view to monitor and orchestrate changes (both functional and technical) across multiple Oracle E-Business Suite systems.
    In release 3.1 Application Change Management Pack has been enhanced to provide more control and flexibility in managing Oracle E-Business Suite changes.
    Some of the key distinguishing features of the new release include:
    * Change Approval Framework: Changes orchestrated through Application Change Management Pack can now be controlled through the new change approval framework in Release 3.1. Users can now be segregated as approvers across Oracle E-Business Suite system(s) and modules (Customization Manager, Patch Manager or Setup Manager). Built in notification capability enables approver(s)/requester to be intimated about the status of relevant change requests. It also provides an implicit audit trail mechanism.
    * Integrated Custom Application Management: An integrated custom applications management feature enables users to easily register new custom applications across Oracle E-Business Suite systems and also track and validate existing custom applications in a standard way. This dashboard also helps track custom objects, packages and file meta-data associated with custom applications.
    * Pre-requisite Patch Analysis: Oracle E-Business Suite patches can now be analyzed for Pre-requisites prior to deployment in the target system. The analysis also verifies whether the pre-requisites are already available (in the target system) and if not, an option to add them to the patch job.
    * Offline Transformation: For the very first time, users have the ability to download Oracle E-Business Suite setup data in Microsoft Excel document. Once downloaded, the Setup Data can be edited or new data can be entered into the worksheets. Data is validated within the Microsoft Excel file and also while uploading into Setup Manager.
    * Built-in Intelligence: Release 3.1 has numerous minor enhancements that provide necessary intelligence for a seamless change orchestration. A few examples are:
    * Automated file driver meta-data generation for new files and $Header handling
    * Customization Package impact analysis report
    * Advanced filtering options for setup migration
    * Improved Usability: Release 3.1 contains numerous usability and reporting enhancements to ensure better integration with third party systems like source control systems and to foster collaborative development.
    Licensing
    Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite are separately licensed products. Application Management Pack for Oracle E-Business Suite Version 3.1 is a mandatory prerequisite for Application Change Management Pack for Oracle E-Business Suite Version 3.1 and should be licensed separately.
    Upgrade
    This pack supersedes the Oracle Application Management Pack for Oracle E-Business Suite 3.0. An upgrade path to Release 3.1 is provided from Release 3.0 only. Therefore it is mandatory for the existing installations to be at the AMP-ACMP Release 3.0 level before upgrading to Release 3.1.
    Downloads
    [Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.1 (Patch 8333939) |http://updates.oracle.com/Orion/PatchDetails/handle_rel_change?release=5623100&plat_lang=46P&patch_file=&file_id=&password_required=&password_required_readme=&merged_trans=&aru=11452056&patch_num=8333939&patch_num_id=1103773&default_release=5623100&default_plat_lang=46P&default_compatible_with=&patch_password=&orderby=&direction=&no_header=0]
    References
    [Getting Started with Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.1 (Metalink Note 982302.1)| https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=982302.1#6 ]
    [Getting Started with Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Metalink Note 812315.1) |https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=812315.1#4]
    [Oracle Enterprise Manager Application Change Management Pack for Oracle E-Business Suite (PDF, 260K)|http://www.oracle.com/technology/products/oem/pdf/ds_appl_chg_mgmt.pdf]
    [Oracle Enterprise Manager Documentation|http://www.oracle.com/technology/documentation/oem.html]

    Srinivas:
    AMP/ACP 3.1 is certified and tested on OEM 10.2.0.5 with Linux.
    We would like to understand how you were trying to install the pack. Please note that AMP/ACP 3.0 installation is a prerequisite before installing AMP/ACP 3.1. So, did you check that the AMP/ACP 3.0 installation completed without errors.
    For details, please refer to the Metalink document ID 982302.1 for more details regarding the same. I would strongly recommend you to follow the 'Oracle Application Management Pack for Oracle E-Business Suite Installation Guide (PDF)' .
    If the issues still persists, please log a SR for the same and let us know the SR#.
    Thanks,
    Lokesh

  • Applications Change Management Pack 3.0 now available

    E-Business Suite Applications Technology Group recently released a new product, the Application Change Management Pack (ACMP), and a new version of their Application Management Pack (AMP).
    The Application Change Management Pack is noteworthy because it provides three new tools for automating updates to multiple E-Business Suite instances:
    Customization Manager automates the packaging of your customizations into AD-compliant packages that can be deployed across multiple E-Business Suite instances. Before packaging, the Customization Manager validates your customizations against Oracle's software coding best practices.
    Patch Manager integrates with Oracle Metalink and automatically downloads and deploys different types of patches across multiple (single or multi-node) E-Business Suite instances.
    Setup Manager helps manage functional setups that need to be duplicated across multiple E-Business Suite instances.
    Licencing
    Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite are separately licensed products. Application Management Pack for Oracle E-Business Suite Version 3.0 is a mandatory prerequisite for Application Change Management Pack for Oracle E-Business Suite Version 3.0 and should be licenced separately.
    Downloads
    The Application Management Pack and Application Change Management Pack are available as a single install using Oracle Universal Installer. They can be downloaded via:
    [Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Patch 8333939)|http://updates.oracle.com/ARULink/PatchSearch/process_form?bug=8333939#uage=0&process=Submit]
    References
    [Getting Started with Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Metalink Note 812315.1)|https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=812315.1]
    [Oracle Enterprise Manager Application Change Management Pack for Oracle E-Business Suite (PDF, 260K)|http://www.oracle.com/technology/products/oem/pdf/ds_appl_chg_mgmt.pdf]
    [Application Management Pack for Oracle E-Business Suite Data Sheet (PDF, 80K)|http://blogs.oracle.com/stevenChan/2009/06/www.oracle.com/technology/products/oem/pdf/apps_mgmt_ebiz.pdf]
    Related Articles
    [Comparing OEM Data Masking and AMP Data Scrambling Features|http://blogs.oracle.com/stevenChan/2008/04/comparing_oem_data_masking_and.html]
    [Certified Oracle RAC Scenarios for Oracle E-Business Suite Cloning|http://blogs.oracle.com/stevenChan/2009/03/certified_rac_scenarios_for_ebs_cloning.html]

    There are many enhancements in Setup Manager compared to iSetup. To list a few:
    1) ability to create a project which groups extracts, loads and reports and orchestrate these tasks as per your requirements.
    2) Ability to migrate data between point releases of EBS. Example, you can move data from 12.0.4 to 12.0.6 or 12.1.1.
    3) Ability to share the projects with other users.
    4) You can do extraction and loading to multiple instances in a single execution.

  • Script to change the priorty of all rules and monitors in a Management Pack

    Script to change the priority and severity  of all rules and monitors in a Management Pack in an override MP .We are deploying an MP in production and don't want the helpdesk to take any action on any alerts, so want to set all of them as informational.Once
    they are reviewed then we will delete that override mp
    Can some one help me with a script
     

    Is this MP sealed?  Doesn't really matter..  Unseal the MP if it is sealed.  Now you have access to the RAW XML.  Alert severity and priority have xml tags.  You should be able to do a search and replace and change all the various
    levels (0-3 or whatever they are) to the levels and priority you want.
    Then you can seal the mp with your own key, or just roll it into prod as an unsealed MP.
    This seems, to me, like the quickest and easiest way to make all of these changes at once.  To bulk override everything, not even sure it's still around or even works, there was a tool called Override Explorer, and you could select multiple monitors/events
    and create overrides.  I can't remember very much about the tool because we didn't use it much, but I think it did this with live data, meaning it connected to your management server, and you made the changes in real time.  
    Of course you wouldn't want to do this in production, so do it in a lab, then export the override mp and put it in prod.
    There is probably some snazzy way to do this with PoSh, but I am not aware of any atm.
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • Applications Management and Change Management Packs Certified with EM 10gR5

    Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
    For more details about the new features, documentation, and patches for the latest Application Management Pack and Application Change Management Pack releases, see:
    [Applications Change Management Pack 3.0 and Applications Management Pack 3.0 Now Available|http://forums.oracle.com/forums/thread.jspa?threadID=935145&tstart=0]
    Oracle E-Business Suite Prerequisites
    11.5.10 with ATG_PF.H RUP5 and higher
    Release 12.0.4 and higher
    Release 12.1
    Certified Platforms
    Linux x86
    Linux x86-64
    Sun Solaris SPARC
    HP-UX Itanium
    HP-UX PA-RISC
    IBM AIX Based Systems
    Certification on Windows platforms is in progress.

    It takes me a lof of time to comprehend the sentence you write. Cause I am a Chinese. My poor English.
    I have to say "you are genius". I used to use the indesign CS2. There is no GREP function in CS2. When I get the new script, I do not know how to use it. Just when I saw the
    'grep {findWhat:"  +"} {changeTo:" "} {includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false} Find all double spaces and replace with single spaces.'
    Being confused.
    Thanks so much. It seems I have to relearn the advanced Indesign.

  • Documentation and Installer for "Oracle VM Management Pack" for EMGC?

    Hi,
    Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.
    Thanks in advance,
    Ranganath

    >
    Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.Hi Ranganath,
    This feature is present in EM Grid Control 10.2.0.5 and you need to enable it..
    Please refer to
    How to Enable Oracle VM Management Pack in EM Grid Control 10.2.0.5 [ID 781879.1]
    http://www.oracle.com/us/corporate/press/017955_EN
    Regards
    Rajesh

  • Oracle Grid Control and Oracle Application Management Pack for Siebel

    I am trying to get the Oracle Grid Control Software to work with the Siebel Application Management Pack so that I can effectively monitor Siebel. The client I am at does not have a budget for proper monitoring solution therefore, I have chosen the free alternative. Anyway, the Oracle 10G Agent is running on all the windows Siebel Servers and all of the Siebel Servers appear within the Oracle Grid Control management tool. At this time I am more interested in monitoring the Siebel metrics versus the windows metrics.. I have added Siebel as a Target Subtab within Oracle Grid Control. I have also successfully run through the Oracle Agent 10G SiebelClassPathfix.bat command on each Siebel Windows Server. What I am not able to do is add a Siebel Enterprise through the Oracle Grid Control Manager Software. When I attempt to add a Siebel Enterprise I receive the following error message. Any suggestions would be beneficial.
    An error occured while adding Siebel Enterprise.
    Credentials - Missing Credentials for host halcrmtgw01.dinghy.hal.test

    Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
    Btw, I take that you are stuck in the step in which you:
    - Click the "Add Enterprise" button to add the enterprise
    - Fill in the 7 parameters
    - Click Ok to start the discovery process
    Which release of Siebel and Enterprise Manager are you using?
    Chung

  • A note on Setup Manager - Application Change Management Pack

    Hi All,
    This is Mugunthan, Development manager for iSetup and Setup Manager. I am happy to begin my note with the launch of Application Change Management Pack 3.1. For those who are not aware of Application Change Management Pack, it is a new product built on top of Oracle Enterprise Manager and comprises of three major modules namely Setup Manager, Customization Manager and Patch Manager. You can find more information about this pack here (LCM: Oracle Application Change Management Pack Setup Manager is enhanced and advanced version of iSetup on Oracle Enterprise Manager. There were good amount of reasons to re-architect iSetup on Oracle Enterprise Manager as Setup Manager.
    Why Setup Manager?
    Ability to migrate to data over point releases of EBS – EBS comes up with rollup patches on top of major releases periodically. It means that you have to certify the patch before it get deployed on to production which means that setup data are to be certified again. iSetup cannot connect between 12.0.4 to 12.0.6 or 12.0.6 to 12.1.1. We have achieved the data migration for above scenarios in Setup Manager (11i to R12 is not supported in Setup Manager)
    Projects – Setup Manager supports grouping of Extracts, Transforms, Loads and Reports as a single entity and can be deployed multiple times to multiple targets. The project consists of one or more tasks (of type Extract/Load/Transform/Report) and can be orchestrated according to your ends. Project execution supports scheduling which means that you can use this feature to sync up setup data between two instances at periodic internal. Projects can be shared with other users which is remarkable difference between iSetup and Setup Manager. You can share your projects with others in a combined development environment. The functional configuration data (Extracts) are stored in Oracle Enterprise Manager. This means that you can refresh EBS without losing Extracts.
    Integration with Change Approval mechanism – Execution of projects is integrated with change approval mechanism which means that you can control who executes what. Also, you have fine grain access control where you can control EBS targets assigned to a user.
    Offline Transformation – I would say this is the most unique feature of Setup Manager and as an implementer you would welcome this feature very much. iSetup has got very limited capability on Transformation. Here we have gone way ahead and support Transformation on almost all Setup Objects. We present you the extracted data in excel sheets. You can download the excel template and work offline. All the attribute value fields in the excel sheet are editable which means that you supply your own value. For example, you can download Operating Unit data in xls file and change operating unit “OU100” to “OU200” and upload it back to system and load to target instance. Please note that any attribute of Operating Unit setup data can be edited. Also, system has got intelligence and once you upload the excel sheet, it automatically changes all the inventory organization which belongs to “OU100” to “OU200”. This behavior can be controlled using attribute mapping which you can create in Setup Manager. Hold on, this is not the end, also you can add more operating unit in excel, say OU300 and OU400 and load it to target instance. You can delete few Operating Units from extracted data in excel sheet and load the remaining to target instance. This gives you complete flexibility to manage (add/edit/delete) functional configuration data offline. This is fantastic feature and please have a look at how it works.
    Advanced Filtering – Filter support in iSetup is not flexible where you cannot use comma separated values and complex sql join conditions. Also you do not know what query is executed behind the scenes to the data. All this problems are addressed in Setup Manager 3.1. We show you the “select clause” (SQL) associated with interface and provide you a text field where you can refer the select clause and provide your own custom where criteria (SQL). This means that filter support is unlimited and you can set filter any database columns. For example, you can extract “Responsibilities/Menu” which are active or created as on yesterday. You can extract all Operating Units excluding “OU100 and OU200”. We support all filter criteria that are supported by SQL.

    Hi,
    your note very interesting. Is there any other way to extract the configuration using SQL? not using Enterprise Manager? hope this will be fastest way then using GUI base.
    Thanks,
    Fahmi Fahlevi

  • Setup Manager - Application Change Management Pack

    Hi All,
    This is Mugunthan, Development manager for iSetup and Setup Manager. I am happy to begin my note with the launch of Application Change Management Pack 3.1. For those who are not aware of Application Change Management Pack, it is a new product built on top of Oracle Enterprise Manager and comprises of three major modules namely Setup Manager, Customization Manager and Patch Manager. You can find more information about this pack here (LCM: Oracle Application Change Management Pack Setup Manager is enhanced and advanced version of iSetup on Oracle Enterprise Manager. There were good amount of reasons to re-architect iSetup on Oracle Enterprise Manager as Setup Manager.
    Why Setup Manager?
    Ability to migrate setup data over point releases of EBS – EBS comes up with roll-up patches on top of major releases periodically. It means that you have to certify the patch before it get deployed on to production which means that setup data are to be certified again. iSetup cannot connect between 12.0.4 to 12.0.6 or 12.0.6 to 12.1.1. We have achieved the data migration for above scenarios in Setup Manager (11i to R12 is not supported in Setup Manager)
    Projects – Setup Manager supports grouping of Extracts, Transforms, Loads and Reports as a single entity and can be deployed multiple times to multiple targets. The project consists of one or more tasks (of type Extract/Load/Transform/Report) and can be orchestrated according to your needs. Project execution supports scheduling which means that you can use this feature to sync up setup data between two instances at periodic internal. Projects can be shared with other users which is remarkable difference between iSetup and Setup Manager. You can share your projects with others in a combined development environment. The functional configuration data (Extracts) are stored in Oracle Enterprise Manager. This means that you can refresh EBS without losing Extracts.
    Integration with Change Approval mechanism – Execution of projects is integrated with change approval mechanism which means that you can control who executes what. Also, you have fine grain access control where you can control EBS targets assigned to a user.
    Offline Transformation – I would say this is the most unique feature of Setup Manager and as an implementer you would welcome this feature very much. iSetup has got very limited capability on Transformation. Here we have gone way ahead and support Transformation on almost all Setup Objects. We present you the extracted data in excel sheets. You can download the excel template and work offline. All the attribute value fields in the excel sheet are editable which means that you supply your own value. For example, you can download Operating Unit data as xls file and change operating unit “OU100” to “OU200” and upload it back to system and load to target instance. Please note that any attribute of Operating Unit setup data can be edited. Also, system has got intelligence and once you upload the excel sheet, it automatically changes all the inventory organization which belongs to “OU100” to “OU200”. This behavior can be controlled using attribute mapping which you can create in Setup Manager. Hold on, this is not the end, also you can add more operating unit in excel, say OU300 and OU400 and load it to target instance. You can delete few Operating Units from extracted data in excel sheet and load the remaining to target instance. This gives you complete flexibility to manage (add/edit/delete) functional configuration data offline. This is fantastic feature and please have a look at how it works.
    Advanced Filtering – Filter support in iSetup is not flexible where you cannot use comma separated values and complex sql join conditions. Also you do not know what query is executed behind the scenes to get the data. All this problems are addressed in Setup Manager 3.1. We show you the “select clause” (SQL) associated with interface and provide you a text field where you can refer the select clause and provide your own custom where criteria (SQL). This means that filter support is unlimited and you can set filter on any database columns. For example, you can extract “Responsibilities/Menu” which are active or created as on yesterday. You can extract all Operating Units excluding “OU100 and OU200”. We support all filter criteria that are supported by SQL.

    Hi Mugunthan,
    Can you provide links to any tutorial or example (screenshots) of using Setup Manager to transfer something between two environments (say Users or DFFs)?
    Thanks,
    Gareth

Maybe you are looking for