Apex based applications

Dear all
We have developed several applications using apex 4.0 with oracle 10g XE, all of these have been deployed on productin envirornment and working fine.
Now i have read some thing on this forum that drawback of oracle 10gXE is that it can support only upto 4GB of data size. does this mean that i will not be able to use this application once data reaches 4GB of size.
If this is true that what are the options left out for me.
Thanks in advance
Regards
Uday

Hi,
Yes, XE can use max 1GB memory and only 1CPU.
More users, more resources are needed for that.
So even you have lot of CPU:s and memory available, XE can not take advantage of those.
You can not run app with thousands users.
Full version of database should not have memory limit.
But depend of license CPU:s might be limited.
I'm not expert with Oracle licenses as others take care that for me.
As I understand there is many variations/prices available.
I do not have good links where to start, but check Oracle store
https://shop.oracle.com/pls/ostore/f?p=ostore:home:0
Regards,
Jari
Edited by: jarola on Feb 4, 2011 11:45 AM
When upgrade XE
http://www.oracle.com/technetwork/database/express-edition/overview/database-xe-when-to-upgrade-128052.pdf
http://www.oracle.com/technetwork/database/express-edition/overview/index.html

Similar Messages

Call BI Publisher Report in APEX, based on R.T.F Template Layout.

Hi to all respected members of this forum.
Since 18th May (Saturday), I am trying to connect BI Publisher Reports with Oracle Application Express 4.2.2.
My APEX Version = APEX 4.2.2
Oracle BI Publisher Enterprise Edition (Trial) = 11.1.1.6.0
Oracle BI Publisher Desktop 32 Bit = 11.117.0.79
For this purpose what I did?
Firstly I downloaded Oracle BI Publisher Enterprise Edition 11.7 and when I started Installation I came to know that "R.C.U (Repository Creation Utility)" is required during installation and I don't have that so, left this idea.
Than I downloaded Oracle BI Publisher Enterprise Edition (Trial) from www.oracle.com and BI Publisher Desktop Edition for Templates because there is no facility in BI Publisher Trial Edition to design Report Templates. I have installed both successfully and created a report as per my requirement.
Now, I want to call that report in Oracle APEX but I am unable to do that.
I followed http://dgielis.blogspot.de/2007/12/call-bi-publisher-report-from-apex.html but the link which is shown in picture no: 03, is not available, so this didn't help me.
Then, I followed Oracle BI Publisher Blog https://blogs.oracle.com/xmlpublisher/entry/apex_users_why_not_integrate_w which discuss to call BI Publisher Report in APEX based on "Generic Report Layout". This done successfully but still I am unable to call BI Publisher Report .
Then I found this type of script
http://localhost/xmlpserver/Guest/Reporting_Channel.xdo&id=FGFC&password=****&xt=Reporting_Channel&xf=pdf
to call BI Publisher Report in APEX but this also failed.
Please help me to understand that how to call "BI Publisher Report in APEX, based on R.T.F Template Layout.
Thanks in Advance.
*Regards:*
*Muhammad Uzair Awan*
*ORACLE APEX Developer*
PAKISTAN.
Edited by: uzairmalik on May 20, 2013 1:32 PM

Are you trying to have multiple sql queries and have multiple sections displaying different data sets ? Or with one single query but display it in different ways in a single report ?
You can create one single query as Report Query in APEX and associate it with a BIP report layout. So you can achieve a Dashboard layout with the report query/layout.

To convert applet-based application?

Hi
There are some tools on market to run an applet-based application on server side. Those tools convert the behavior of applet application to Jsp application. So they run the application on web server and send HTML to web browser.
One of those tools is WebCream(www.creamtec.com)
Would appreciate to let me know other tools or any other ways to achive this.
Thanks in Advance.

repost

How to add iad's to window based application in xcode for ios

hello,
Im trying to add iad's to a window based application. I add the framework and add the banner in interface builder. The program builds without any problems but when I try to run the application on the simulator, the app crashes. Don't know what im doing wrong. Do I need to add any extra code or something. Please help, thanks in advance

hello,
Im trying to add iad's to a window based application. I add the framework and add the banner in interface builder. The program builds without any problems but when I try to run the application on the simulator, the app crashes. Don't know what im doing wrong. Do I need to add any extra code or something. Please help, thanks in advance

Conversion of forms5.0 to web based application

dear folks,
i have an existing application which runs on forms 5.0. i want to
convert it to a web based application. i do not want to rewrite
the scripts.if some of you could tell me the details about how to
go about it.
null

I am not sure if there is any tool to do that.
You can delete WebSphere specific xml files from ear/jar and open it in Weblogic's builder tool. Weblogic Builder is a GUI tool. Helps you assign values for deployment parameters, Transaction attributes, JNDI names and so on. Then you can generate deployment descriptors. Subsequently you can modify the descriptors as and when you want.

Client/Server to Web-Based application Conversion

Hi! Everyone,
I have couple of questions for you guys.
Our Client had recently upgraded Forms 4.5 to 6i to move from Client/Server based application to Web based application.
They are using Forms Server 6i Patch Set 1, OAS 4.0.8.1, Windows NT Service Pack 5 and Oracle 7.3. They are facing the following error every now and then, when they run the forms,
"FRM-92100: Your connection to the server was interrupted. This may be the result of a network error or a failure on the server.You will need to re-establish your session."
Please let me know what might be causing the above error. The only problem i can think about might be Oracle 7.3. If i am right only Oracle 8 and above supports Forms 6i.
Can anyone let me know some tips and/or techniques to upgrade Forms 4.5 to 6i. If there are any important settings/steps which we might have over looked during the upgrade, please list them.
Any kind of help is greatly appreciated.
Thanks,
Jeevan Kallem
[email protected]

Most of the code is use with no changes at all.
See otn.oracle.com/formsupgrade
Regards
Grant Ronald

How to integrate web based application to windows based application

Hi,
Experts,
we developed web based application in this when we raising
invoice document after adding this we need to updated Amount
in integratee SAP B1 then that Amount we need Update The
Amount in OACT Table how we can Update in Amount Field
in OACT Particular Account Code. plz Guide me. and how to
integrate web absed application to windowbased application
plz help me.
Regds,
Samapth.

Dear sampathdevunuri kumar,
You may develop the addon based on SDK DIServer for required function.
The DI Server is an extension of the DI API and supports all its objects. It is intended for high-volume data integration, where numerous client connections must be managed simultaneously and optimized for speed. It is also suitable where Web-services architecture is preferred.
Please refer to SDK help and SDK DIServer sample for more information.
Best Regards
Jane Jing
SAP Business One Forums team

Convert AWT based application to ESWT based application on PDA

Dear Experts ,
is it possible to work with ESWT framework with MDSD 4.0 ( AWT based application) ?

Hi Ahmed,
It is not possible to convert AWT application to ESWT.
Regards,
Dhanya

Web Based Application Single Sign on With Enterprise Portal

Good day Developers,
My question is really a two part question so forgive me in advance for asking in one post as I think they are relative to each other. My project is currently exlporing the creation of functionality that will allow the following:
1. We want to allow a secure Web Based application possessing the abilitiy to auithenticate the user into Enterprise Portal and by passing the login screen to get to a landing page/iview in our Enterprise Portal instannce.
2. We want the abilitity to perform a check of the user and create the user in the enterprise portal on the fly if they do not already exist.
So far in my research I've come across tools and white papers mentioning the use rof oAuth and OpenID. Is that the right way to tackle these two items. Thanks for your help in advance.
JD

Hi
1. You can do SSO between you application and portal using Verisign or third party authentication tool. I am not pretty sure how landing page and all will work as you mentioned.
As portal is web based, you can deply your application in portal server. So that you will not need any other authentication tool.Also you can save effort , cost.
2. By deploying application in portal also you do not have to concentrate on User management, which is itself a huge effort you have to put. Else you can go for third party tools like Identity management or ADS.
-Yogesh

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

Registering the Web based application as a Partner Application

Good day
I went through the suggested documentation of registering a
web based application as a partner application of the SSO Login Server.
I installed the SSOSDK.JAR and went through the demo application (JSP Demo)
which consists of the following programs :
papp.jsp
ssoinclude.jsp
ssoEnablerJspBean
SSOEnablerBean
SSOSignon
As per the technical documentation,I register this demo application as a
partner application.
1 - The source code of the papp.jsp checks for the existence of the user
through method of ssoEnablerJspBean [getSSOUserInfo(request, response)] which
calls method of SSOEnablerBean [getSSOUserInfo (request, response) and this
method calls getUserInfo(p_request) of SSOEnablerBean (the same program) to
check the existence of the application cookie.
2 - If it doesn't exit , it redirect it to the SSO Login page for user
authentication.Once the user is authenticated, a SSO login cookie is created on
the client's browser and redirects back to the SSOSignOn.
3 - The SSOSignOn program creates the application cookie and redirects back to
the entry point of the demo application which is papp.jsp.
My Questions are as follows :
1 - Instead of creating a session object within my web based application to hold some
information used between the different pages, can I define them in the
application cookie? kindly advise? Is there any limitation for the length of
the application cookie? If yes, what will be the risk?
2 - The SSOSignOn program is calling a method in the SSOEnablerBean
[setPartnerAppCookie(response, request). Within this method , it is retrieving
the parameters values of the request object as :
request.getParameterValues("urlc")[0];
What is the role of this [urlc]? Is it hard coded? Can I change it?
3 - In order to ensure that I am still dealing with the same user, shall I put
the above security check procedure on each page of my weeb based application? Kindly advise?
Thanks in advance for your prompt feedback
regards

Dear Paul
I think there is a misunderstanding regarding the last correspondence.
I am talking about the customized home page of the PORTAL and not the home page of my web based application (JSP) .So in this case, Am I able to use the customized home page which contains a login portlet instead of the default Login page of the SSO Login Server.Kindly advise!!!
On the other hand, I am facing a problem during the surfing of the web based application.
The web based application consists mainly of two packages :
Package I : Bank.counter which contains a set of jsp pages.
JSP_HOME_COUNTER (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER_DETAIL
Package II : Bank.portfolio which contains a set of jsp pages.
JSP_HOME_PORTFOLIO (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_PORTFOLIO
JSP_MAIN_FRAME_PORTFOLIO
Please note that the SSO classes are residing under the first package.
As agreed on in the third question, I am including in each page of my web based application, a security check procedure as follows :
<%@ include file="ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Please note that all the jsp page of the portfolio package are pointing to the SSO classes as follows :
<%@ include file="../counter/ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Once I invoke the JSP_HOME_COUNTER , it will render the JSP_LEFT_FRAME_COUNTER page and
JSP_MAIN_FRAME_COUNTER page which invokes the SSO Login page. Once the user has been authenticate, the result of the JSP_MAIN_FRAME_COUNTER is rendered successfully. The result contains an hyperlink to the
JSP_MAIN_FRAME_COUNTER_DETAIL page. As the user has been authenticated , this page is rendering automatically the result without displaying the SSO Login page. (Perfect as of now!!).
Once I invoke the JSP_HOME_PORTFOLIO from the JSP_HOME_COUNTER, it runs the security procedure without any rendering of the SSO Login page (fine!!) but redirects me back to JSP_HOME_COUNTER instead of rendering the result of the JSP_HOME_PORTFOLIO.
please note that the m_requestUrl variable in the SSOEnablerJSPBean class has been assigned the folowing value : JSP_HOME_COUNTER
Kindly advise .

Problem with Java-based application and WebVPN

Hello. Could you please help me in find out any specification/known limitations in using Java-based applications through WebVPN in Cisco ASA 5520 v8.3(2).
A customer of mine has got in trouble in using a Java viewer for graphical files that is invoked by another application (this one correctly served via WebVPN), that cannot be launched because JVM does not find it (NullPointer).
Our suspects are generically about the URL rewriting of the WebVPN and/or unsupported configuration in the ASA SSL certificates vs Java.
Any hint about where to search or what to try?
Thanks.

Hello. Could you please help me in find out any specification/known limitations in using Java-based applications through WebVPN in Cisco ASA 5520 v8.3(2).
A customer of mine has got in trouble in using a Java viewer for graphical files that is invoked by another application (this one correctly served via WebVPN), that cannot be launched because JVM does not find it (NullPointer).
Our suspects are generically about the URL rewriting of the WebVPN and/or unsupported configuration in the ASA SSL certificates vs Java.
Any hint about where to search or what to try?
Thanks.

Stand alone vs. Browser based application

Can someone please tell me what are the pro's and con's of a browser based application specially for an XML authoring tool.
Here are some of the advantages I found for non-browser application:
1. We have a flexible submittal process, since the user can launch the application anytime.
2. Once launched, user can work offline. When done, user can again connect to the network and save the document to a repository.
3. We will have a better look and feel for our authoring tool, since it is not constrained within the browser area.
Let me know your thoughts and ideas.
null

Can someone please tell me what are the pro's and con's of a browser based application specially for an XML authoring tool.
Here are some of the advantages I found for non-browser application:
1. We have a flexible submittal process, since the user can launch the application anytime.
2. Once launched, user can work offline. When done, user can again connect to the network and save the document to a repository.
3. We will have a better look and feel for our authoring tool, since it is not constrained within the browser area.
Let me know your thoughts and ideas.
null

How to open the link in new firefox window for web desktop based application? Or how to open the mail/website/rss link in new firefox window

I am using the firefox 3.6. My problem is that I am using the web desktop and few web desktop based application directly opens link. If I click on rss link than it opens in same window, so no longer access to web desktop. I want to open any kind of link in new window instead of same window. I have tired to change the value of browser.link.open_newwindow, browser.link.open_newwindow.restriction but doesn't work. Also gone through the https://developer.mozilla.org/en/window.open but not sure where to do this in web desktop based application or firefox where we connect the web desktop?
Is there any way to open the link every time in new firefox window?

Hi Joseph,
the HTMLB link object misses the support for onClientClick through the tag lib, see hbj:link without onClientClick ? and OnClientClick Event for Link HTMLB Component for similiar problems and workarounds.
With this workaround, you can call for example an AbstractPortalComponent, implement doOnNodeReady (with an empty doContent method) and return the PDF, settings the content type on the http before etc.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Table View in View-based Application

Hi.
I want to use an UITableView in a View-based Application.
All examples I found are for Navigation-based Applications.
I Found only one example for View-based Applications, but it create all components himself without the Interface-Builder.
I search an example with Interface-Builder.
My main problem is, when i create a view with Interface-Builder, the controller class does not inherit from UITableViewController.

GrinderFX wrote:
I want to use an UITableView in a View-based Application.
Hi, and welcome to the Dev Forum!
Firstly, I would point out that you don't need to use UITableViewController to control a table view. The table view controller is just more convenient. So for example, you could simply drag a table view from the library in IB and drop it onto your view. Then you could hook up the table view's dataSource and delegate outlets to the File's Owner. Then you would add the data source and delegate protocols to the @interface of your UIViewController subclass and add the required data source and delegate methods to the @implementation.
I mention the above because building your table view that way is very instructive. If you want to learn more about table views in general I would recommend Chapter 8 of +Beginning iPhone Development: Exploring the iPhone SDK by Mark and LaMarche+, which includes 3 table view projects that don't involve a navigation controller.
My main problem is, when i create a view with Interface-Builder, the controller class does not inherit from UITableViewController.
Returning to your specific question, IB allows you to change the class of an object. Here are the steps to use the View-Based Application template as you described (In the following I'm using Grinder as the name of the project; e.g. the app delegate class is named GrinderAppDelegate, and the view controller subclass is named GrinderViewController):
1) _Change parent of view controller subclass in your code_
In GrinderViewController.h, you only need to change the superclass from UIViewController to UITableViewController:
@interface GrinderViewController : UITableViewController {
However it will be easier later on if you make new files from the UITableViewController file template:
a) Ctrl-click on GVC.h and GVC.m in the Groups & Files tree; select Delete->Also Move to Trash;
b) Ctrl-click on Classes; select Add->New File->iPhone OS->Cocoa Touch Classes;
c) Select UITableViewController subclass from the right center panel and click Next;
d) File Name: GrinderViewController.m; check Also create GrinderViewController.h;
e) Make sure the name for these new files is exactly the same as the ones you deleted; if you make a mistake here, delete the new files and start over, because that name must be the same in several other files;
f) Click Finish; the replacement files should now appear under Classes.
2) _Change the view controller class in IB_
a) Double click on MainWindow.xib under Resources in the Groups & Files tree;
b) Make sure the MainWindow.xib window is open by selecting Window->Document from the IB menu;
c) Locate the View Mode switch, upper-left, in the xib window, and select the Center position;
d) The xib window should now be displaying two columns with small icons on the left;
e) Select the Grinder View Controller icon;
f) Select Edit-Delete to delete that icon;
g) Select Tools->Library from the menu, and expand Controllers in the Library Panel;
h) Drag a Table View Controller to the xib window and drop it right under the app delegate icon;
i) Select Tools->Identity Inspector from the menu to open the Grinder View Controller Identity Panel (the new Table View Controller should still be selected in the xib window);
j) Under Class Identity, select Grinder View Controller from the list; tab out of the Class field to be sure the selection is recorded;
k) Ctrl-Click on Grinder App Delegate and connect the view controller outlet (ctrl-drag) to Grinder View Controller;
l) Expand GVC in the xib window and delete the Table View icon (since we want it in the other xib file);
m) Reselect the GVC icon and open the Grinder View Controller Attributes panel;
n) Under View Controller, select GrinderViewController from the NIB Name list;
o) In the Table View Controller IB Editor window, select GrinderViewController.nib to open the other xib file;
p) Make sure the GrinderViewController.xib window is open in small icon mode as in steps b-d above;
q) The class of the File's Owner should be GrinderViewController;
r) Delete the View icon;
s) Drag a Table View from the Library to where the View icon was;
t) Ctrl-click on File's Owner and connect (ctrl-drag) it's view outlet to the Table View;
u) Ctrl-click on Table View: connect both the dataSource and delegate outlets to File's Owner;
v) File->Save both xib files.
3) _Make some rows in the table view and test_
a) Open GrinderViewController.m in Xcode;
b) Add the commented lines (be sure to use the correct line for your target OS);
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
return 20; // <-- change to more than zero
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static NSString *CellIdentifier = @"Cell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease];
// Configure the cell
// add this line for OS 2.x
cell.text = [NSString stringWithFormat:@"Row %d", indexPath.row];
// add this line for OS 3.0
// cell.textLabel.text = [NSString stringWithFormat:@"Row %d", indexPath.row];
return cell;
c) Build and Go.
I should add that the procedure might be a little easier if you start with the Window-Based Application Template. But the above is good practice in editing xib files.
Hope that's helpful!
- Ray

Apex based applications

Similar Messages

Maybe you are looking for