APEX Forms Migration - How to redefine default's page number

Hi there,
I'm following some Oracle OBE to migrate a simple Form application: http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/appdev/apex/apexformmigr/apexformmigr.htm
I've imported all the xml files and I'd like now to create the application with the wizard creator based on the files previously imported.
Home>Application Builder>Application Migrations>Project: migration1>Generate Application
At some step, the wizard shows me pages that will be created. However, I'd like to reasign the page with the page numbers. Do you have any clue how can I perform this action ?
Thanks a lot.
Regards,
Ulrich

Generally speaking page numbers don't really matter to anyone other than the Apex engine. However, if you really need to change page numbers then make a copy of your page and give it a high number, i.e. page 1 becomes 1001. Then delete the original pages and copy your high numbered pages back to the page numbers you want. It's a pain, which is why most people don't pay much attention to which page numbers their pages end up with.
Hope that helps.
Earl

Similar Messages

How can I remove the page number from the first page of the document that is the cover page?

How can I remove the page number from the first page of the document that is the cover page?

If you open the Pages panel, (Window>Pages) you will see thumbnails of your master pages and your document pages. In new documents, there is usually a master called A-Master and one called None. If you drag the thumbnail of the None master onto the thumbnail of a document page, it will apply that master to that page. Presumably, you have made your page numbers on A-Master, so this will usually do the trick. If you have elements on A-Master that you need on the first page, but just not the page number, you can duplicate A-Master (which, by default will give you B-Master, but you can change the names if you like) and remove the page number on the duplicate and apply that to the document page.
It might also be worth noting that you can apply master pages in the fly-out of the Pages panel. Go to the fly-out triangle and go down to Apply Master to Pages…, then select a master to apply and the range of pages (1-8 will give you all 8, 1, 3, 5, 7 will be the odds, 1-3, 4, 6-8 if you want continuous ranges and individual pages).

How can we repeat specific page number of pdf file by using FDF Toolkit for Windows?

how can we repeat specific page number of pdf file by using FDF Toolkit for Windows?

let's say a registration form, there is only 1 full address provided in my registration pdf, but applicant could have more than 1 address, so i have to make it more flexible to extend the address page no matter how many addresses that applicant provided, i have use adobe acrobat pro to edit the form properties. but dont know how to extend/duplicate a page in felxible times.
Please advise~ tks so much!!! George

How to know the total page number of the standard report

How to know the total page number of the standard report?
If I insert a graph, a table, or text into the end of the standard report, how to know how much space is left for the current page?

Hello Net,
Unfortunately, we do not have any VIs in LabVIEW that can figure out the number of pages of a standard report. However, with the use of ActiveX calls you can achieve this task. Here are a couple of discussion forums which discuss this:
Excel Page Numbering with ActiveX:
http://forums.ni.com/ni/board/message?board.id=170&message.id=194479&requireLogin=False
Number Pages in Word Report:
http://forums.ni.com/ni/board/message?board.id=170&message.id=162972&requireLogin=False
There is also great documentation on using ActiveX on msdn. You can search this document for page number objects. Here is a link to this:
http://msdn2.microsoft.com/en-us/library/aa223048(office.11).aspx
Please refer to these links. If you still have questions please feel free to let us know so we can assist you.
Thank you
Best Regards,
Dominic L.

How to customize default login page of FBA

Hi,
I have implemented a SharePoint 2013 Portal with Form Based Authentication.
I want to customize the look and feel of default login page.
How could i do that?

Hi,
For your requirement, you can take a look at the three links below for a quick start:
http://sivarajan.me/post/SharePoint-2013-Enabling-Custom-Login-Page-and-Mixed-Contents-Part-2
http://blogs.msdn.com/b/kaevans/archive/2010/07/09/creating-a-custom-login-page-for-sharepoint-2010.aspx
http://mysharepointsolution.wordpress.com/tag/custom-login-page/
What’s more, The deafult login page is located here: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\IDENTITYMODEL\LOGIN\default.aspx, you can
make a copy and modify it.
Thanks
Patrick Liang
TechNet Community Support

In the ECM .How to change default login page.

Now,my default login page is search page .I want to make home page into workflow page. thanks.
Edited by: 976375 on 2013-1-31 下午5:57

Take a look here: Re: Customize Login Page
As for
I want to make home page into workflow page.I'm afraid it is impossible - for workflow a user has to authenticate first.
Maybe rather than change default login page you want redirect to a different page? This is also possible - see Re: Custom page to log in

How to get the total page number when using Crystal Report in JSP

In my JSP, I use the class CrystalReportViewer to generate and display the report views. But this class only sypply the function to get the info of the active view.
Thus with this info, I only can get the active view's page number. How can I get the report total page number without showing the last page first?
Thanks.

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

In Pages - How do I delete a page number from an imported Word doc?

I was sent an email with a six page WORD document attached. The attachment opened in Pages. Most of it is good, but there are page number characters in the wrong place. I cannot do anything to them. They seem to be outside the document text, off to the right side and only partially showing. Definitely not at the bottom where they should be seen. Going over them with the cursor does not allow me to select and delete these numbers. I thought they might be in footnote format and in the Inspector I unchecked Header and Footnote, which did nothing to help.
Also, I've tried without success to just go and add my own page numbers which might work, but then will need white-out or similar to remove the old page number.
Working in Text and PDF format did not work, either, and I do not have Word.
Unfortunately, I've spent hours on this and really hope somebody has a good suggestion on how to deal with these characters.
Thanks

Just to clarify, once you have done this you still need to use the command key and 'lasoo' the object from off the edge. So full process (in version '09 4.3) is
Format > Advanced > Make Master Objects Selectable
Then put your mouse to the edge of the page, press CMD key and drag to select the offending item. Then it will appear with a box around and can be deleted.
Thanks to all who posted these tips - I was pulling my hair out over a client document!

How do you change the page number position on the page and size?

I am having difficulty changing the size/color/position of the page number in the book? Does anyone know how to do this?
thanx.

Yes, you can change the position. Do it in Master Layouts. Select the page number - a red box appears around it - select: left, center, or right justification. That will move it within the box. To move the box on the page, just drag the box to where you want it. - Fabe

How do I remove the page number from first page?

I'm new at Ai so this may be basic. I can't figure out how to eliminate the page number from the first page. Any help would be appreciated.

Normally I would have a different master page for the first page, then have no page number on that master page.
Apply this master to the first page.
Or you can manually override the frame by holding CTRL SHIFT and clicking on the frame, then delete it.

How to find opener window page number

Hi All,
I have 2 pages. From page 1, I am opening page 2 as a popup. I want to find the opener page number, because the same page 2 is called form different pages.
Please let me know is there any $x_ variable I can use instead of writing some code. I appreciate your help.
Regards

Thanks a lot Jari,
Some reason it is not working,
when I alert I am getting following output
alert(' page no => '+ opener.$x("pFlowStepId"));
output is
page no => [object]
Do you have doc list all these variables?
I have one more question to same popup.
I have window.doSubmit('DO'); after that I am doing to refresh parent page and close the window. But the do submit is taking some time and my parent pages is not refreshing the changes because of that ( it seems commit is taking some time).
I there any way I can force timeout my logic looks like this
window.doSubmit('DO');
var w=self.setTimeout('',25000);
do_parent_refresh();
var w2=self.setTimeout('',25000);
window.close;
The problem is the timer is not working. If I have alert('') everything is working fine. Please help me.
Regards
Edited by: james. on Aug 1, 2011 8:33 AM

Quick question: How to get the scrolled page number using af:table

Hi,
When using range paging on scrolled table, how to get the current scrolled page number(1,2,3...), for example when moving the table vertical scroll bar forward or backward, is there any method in ViewObjectImpl class that I can use to get such information? I have seen the method scrollToRangePage(int i), but when scrolled ("Fetching data..."), it doesn't not get into this method. So it is wrong usage for this method, right?
Thanks

Didn't you just ask that question in this thread?: How to catch the page number when using scroll table in ADF 11g?
A bit of patience might be in order.
CM.

Forms Personalization: how to Set default value to field

Hi all,
I have trouble with to fill in a field with an initial value where in defined an LOV.
When I open the screen "Contract Commitment" via the responsibility "Contract Commitment Super User" I would like to see a initial value in the "Type" field in "Details" tab. I have tried some cases but with no result.
Could someone point me to a solution or give me a hint how to solve this issue via forms personalization?
field to be filled in:CC_ACCESS_NAME
screen: IGCCENTR
Block: ACCESS
LOV: ACCESS_TYPE_LOV
GROUP_NAME of LOV: ACCESS_TYPE_RG
EBS version 12.0.4
Many thanks,
Cafer

Thanks Fassi for your information.
I can use INITIAL VALUE only with WHEN-NEW-RECORD-INTANCE trigger. In my case this is not usefull but wel correct advise.
I need the trigger WHEN-NEW-FORM-INSTANCE and I have used VALUE property
I could notice that there are 2 other fields which have also LOV on them in the same screen.
if I gave these fields (ACCESS.NAM and ACCESS.CC_ACCESS_LEVEL_DESC) a defualt value then it was working for them but not for the first field (ACCESS.CC_ACCESS_TYPE_NAME)
I have solved my issue with a trick as follows:
In the same personalization I have created a new action row with a sequence earlier than ACCESS.CC_ACCESS_TYPE_NAME action and the field CC_DESC is also earlier in the screen than ACCESS.CC_ACCESS_TYPE_NAME. So I have given this field (CC_DESC ) a value as '' (SPACE). So I could manange to see the defualt value in ACCESS.CC_ACCESS_TYPE_NAME field.
Regards,
Cafer

How to redefine default keys?

Currently I use FORMS 6i and wish to define
SCROLLUP and SCROLLDOWN events to PAGEUP and PAGEDOWN keys. How to make it?
thx.

You can use Oracle Terminal. More about it you can see in the Forms on-line help.
Helena

How to change default vertical page co-ordinates from center, to top?

Hi There,
We're having trouble understanding why InDesign centers the page instead of aligning the view to the top when switching pages (and copying and pasting) - and how to change this behavior.
To understand what I'm talking about, do the following:
Create a new document (any size)
Use the page tool to to change the height
Create a new page and use the page tool to make the height a lot taller
Now switch between the pages
Notice how InDesign always shows you the center of the page?
This is frustrating in many situations like copying and pasting - try the following:
Create a box on the first page and align it to 20mm from the top and 20mm from the left
Copy the box
Switch to the second page
Paste using CMD + OPT + SHFT + P
The object should be pasted in the same spot (20mm from the top and 20mm from the left) but it isn't - on the vertical, it's pasted relative to the center of the page for some reason.
It surprising how annoying this becomes when you're constantly re-positioning pasted items or when switching between web layouts of different heights - it becomes a two step process instead of one.
Does anyone know how to change this behavior?
Any pointers in the right direction would be much appreciated - we're using CS5.5
Cheers
Ben

Thanks for the replies - sorry I didn't reply earlier but they went to junk.
Why in the same spot if pages have different size?
In general, sure - but what about letting the user define a point of reference? For me, it's always the top left corner like the rulers - I completely understand if that doesn't work for others but it would save me so much wasted time constantly repositioning objects.
Also, in a lot of documents with different page-sizes, setting the reference to top left (or whatever you set your rulers to) actually works a lot of the time - granted, probably only for those that use the numbers to position objects.
Anyway, what I'd like to do is find out how to set a document-wide reference point for co-ordinates - obviously you can't do this right?
Another thing that wastes time (in a similar vein) is the ability to set defaults for translation, rotation and flipping etc.
Almost without fail, I find I want top left when moving (because I set rulers to top left) but center for rotation and flipping. Being able to set a default per translation type would save a lot of pointing and clicking.
Is this possible?

APEX Forms Migration - How to redefine default's page number

Similar Messages

Maybe you are looking for