Apex reload jquery after validation error

After a validation error has ocured my jquery does not laod. What must i do in order to reload the whole page again after the validation error?

jquery always loads fine. I'm not going into a big what-if-then-what discussion about what might or might not be causing this. You're simply not giving us any information about both your setup and what is happening.
This validation on your text fields, what is it? I suspect it is not the standard apex validation. Are these plain standard text fields? When does the error occur? When you submit the page? Have you tried to debug? Did you take a look at the browser's developer tools console and see if there is any javascript error? Anything special you are not mentioning because you think it might not be relevant? Considered recreating your issue on apex.oracle.com?

Similar Messages

Page rendering process doesn't run after validation error

I have a page rendering process (On Load - After Regions) that needs to be run for my page to be rendered properly; however, it doesn't run when the page is rendered after a validation error. In debug mode, I see the following line:
"0.05: ......do not perform process because inline validation condition found."
Is this a bug? Validations are meant to prevent execution of On Submit processes, but is there a reason to also not run rendering processes?
I need to dynamically construct some javascript and insert it somewhere after a certain item on the page. Is there a workaround?
Thanks.
Rodney

Rodney,
Let me see if I understand your question:
1. A page is rendered
2. The page is submitted
3. A validation fires and fails
4. The page is re-rendered displaying the validation error message
5. Your on-load after regions process did not fire
You want to run a process in all cases; in the standard page load case (1) and in the re-load case (4).
You can do this by creating a region of type PL/SQL. You can give the region a null template so that it will not display any values. The region can be the last one displayed on the page; so that it will be run last.
You also asked if it is a bug that the on-load after regions process did not fire; as the debug message indicates this is proper. Here is an example that illustrates why you typically don't want to perform processes when rendering a page after it was posted causing a validation to fire.
Lets take the following example:
1. create a form on the emp table; assume a salary column called "SAL"
2. create a validation that says the salary must be numeric
3. edit a row of the EMP table
4. change the employee job from clerk to manager; and enter a "X" in the salary item
5. submit the page
6. the validation will fire; page processing will stop; and the page will be re-displayed
7. the process which fetches the rows will not fire; and the page will be re-displayed; the job item will display the change from "clerk" to "manager" and salary will still contain the invalid "X" value. If the process had fired it would have replaced the values in the form.
My recommendation is that you use regions for any processing that is UI releated. I hope this helps.
Mike

Translated item labels swap to original language after validation error

Hello,
I've the weird behaviour in my application that translated item labels change to the original label name in case a validation error on that item occurs. I am displaying inline+notification errors. Only the labels of the "error-items" show the behaviour. What is this and how can I fix it.
Many thanks in advance!
Jacob

Hi Arie,
It might be I'm not using translated applications in the right way then. What I do is I always leave the language of the application: application primary language
In order to switch from language I change the primary language from dutch to french or vice versa. In this way, the application language changes accordingly from dutch (original) to french (translated). f this is not the proper way, what do you suggest?
In case a validation error occurs on an item with label "NAAM". The error is displayed inline with that item and in the notification area, and the item label is now "NOM"
Apex version is 3.1.0
Hope this makes things clearer.
Jacob

XML Forms Combobox entries are disappearing after validation error

In my XMLForm I have a combobox which is filled with items from a property. After submitting the form (when saving) with a validation error (e.g. date invalid) the entires in the combobox disappear and the entry can be saved without an entry (can this be permitted?).
Also, when opening the saved entry, the combobox is also empty. I think this is a (unpatched?) KM/XMLForms bug, but maybe there a patch or an other solution for this?
Is it possible the fill the combobox with fixed entries (without using the property)

ok, fixed it with the following :
<ice:selectOneMenu id="chosenSystem" value="#{userRoles.selectedSystem}"
                   valueChangeListener="#{userRoles.systemValueChanged}"
                   immediate="true" partialSubmit="true" required="true"
                   requiredMessage="#{fv_msg.ursysmandatory}" >
    <f:selectItem itemLabel="Choisissez un truc" itemValue=""/>
    <f:selectItems value="#{userRoles.remoteSystemItems}"/>
</ice:selectOneMenu>
<ice:selectOneMenu id="chosenAbstraction" value="#{userRoles.userRole.abstraction}"
                   converter="remoteAbstractionConverter" >
    <f:selectItem itemLabel="Choisissez un truc" itemValue=""/>
    <f:selectItems binding="#{userRoles.remoteAbstractionsHtml}"/>
</ice:selectOneMenu>The valuechangelistener simply updates the binded component in chosenabstraction.
Any idea on how to do that with ajax?
Edited by: hereps on Aug 21, 2010 2:16 AM

Updating InputText after a validation error

Hi everyone,
I am having problems updating InputText after a validation error.
Im using jdeveloper 11.1.1.1.0
Steps without error validation works correctly
1.-I put 3 in the component "value" (second InputText)
2 .- validation begins, and rightly
3 .- I put the value 1 component "optional" (first imputtext)
4 .- Click the button "move"
5 .- The componte "value" modify its contents appearing 1
Steps with error validation not working properly
1.-I put 4 in the component "value" (second InputText)
2 .- validation begins, and it is wrong. Errror message appears
3 .- I put the value 1 component "optional" (first imputtext)
4 .- Click the button "move"
5 .- The componte "value" does not alter its contents.
Why not change its value after validation error?
I included an example with two and a button InputText
<af:inputText label="Optional" id="it1" autoSubmit="true" />
<af:commandButton text="commandButton 1" id="cb1" immediate="true" actionListener="#{inputExample.move}"/>
<af:inputText label="Value" id="it2" immediate="true" autoSubmit="true" validator="#{inputExample.validatorExample}" value="#{inputExample.targetValue}"/>
public void validatorExample(FacesContext facesContext, UIComponent uIComponent, Object object) {
Number number = null;
try {
number = new Number(object);
} catch (SQLException e) {
if ((number.longValue() % 2) == 0) {
FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR, "ES PAR", "ES PAR");
((RichInputText)uIComponent).setValid(false);
throw new ValidatorException(message);
public void move(ActionEvent actionEvent) {
FacesContext facesContext = FacesContext.getCurrentInstance();
UIComponent x = facesContext.getViewRoot().findComponent("it1");
RichInputText input1 = (RichInputText)x;
String value = (String)input1.getValue();
UIComponent x2 = facesContext.getViewRoot().findComponent("it2");
RichInputText input2 = (RichInputText)x2;
input2.setValue(value);
RequestContext.getCurrentInstance().addPartialTarget(input2);
}

Yes but the action will be executed with invalid data.
After validation fails the new (invalid) value is not set so when you get the value you get the previous (valid) one.
If you want the validation just to warn the user but allow him to continue with executing actions with the new values then you should not use a validator.
You could instead use a valueChangeListener were you can display a message to the user allowing the value to be set normaly.
Gabriel.

Read-only radio group losing value on validation error

It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
Is this a bug or am I simply missing something?
Apex 3.1.2
Rgds/Mark M.

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

How to fire a clear item process on validation error

Hi
this is probably a simple one but eludeing me at the mo...
I have 2 password fields > password and verify password respectively.
I want to be able to clear both fields in the event the password verification validation fails.
I have created a clear cache process with the condition set to 'When inline validation errors displayed' but i don't think the flow of logic goes as far as the processes after validation errors occur??
anybody got a work around?

You can use a function returning boolean validation and when it fails set the items to null before returning false, e.g.,
if :OLD_PW <> :NEW_PW then
    :OLD_PW := null;
    :NEW_PW := null;
    return false;
end if;Scott

After March Patch Tuesday: Unresolvable Windows 7 Validation errors

I have had a stable Windows 7 Enterprise installation with the initial MAK Product key for a couple years. After the Microsoft Patch Tuesday monthly set for March was applied, the system started complaining with a popup window "You may be a victim of
software counterfeiting". It had a hyperlink entitled "Go online and resolve now" which resolved to
http://www.microsoft.com/genuine/validate/?OSV=6.1.7601.2.00010100.1.0.004.09.1033&LS=3&LegitCheckError=00000052&GenuineInfo=00000000&Channel=0&ErrCode=00000000
This presented a new Internet Explorer window "Validation Status: Action Required" with a hyperlink, 'Validate Now" which resolved to
http://www.microsoft.com/genuine/downloads/GenerateHTA.aspx?displaylang=en&Error=52&OSV=6.1.7601.2.00010100.1.0.004.09.1033&GenuineInfo=00000000&ls=3&page=avsValidate
It resulted in a popup window asking what I wanted to do with legitcheck.hta
Embedded in its code, it loads some javascript at http://www.microsoft.com/genuine/static/js/CommonFunctions.js"
I saved legitcheck.hta and then ran it, it loaded an Internet Explorer “DownloadValidationSupport” web page which offered two steps, Download then Continue.
The Download link was for WindowsActivationUpdate.exe
I did download WindowsActivationUpdate.exe and run it, but every single time (there were many), after running it, every time if I selected Continue, I always received the messsage:
Please wait for the install to complete and then click Continue or view the Troubleshooting tips
At any time (before, during, after) the above processes, if I went to Control Panel - System, at Windows Activation Windows Activation it always stated:
Status: Not Available
Product ID: Not Available
Next I ran the Microsoft Genuine Diagnostics Tool. At the Windows tab it reported:
Validation info:
Validation COde: 0x8004FE21
Product Key: N/A, hr=0x8007003
Product Key Hash: N/A, hr=0x8007003
Product ID: 55041-009-6438966-86672
Windows Product ID: 55041-009-6438966-86672
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {5CDF3EA5-3CCC-44B8-88F1-E7DCB7020595}{3}
Administrator: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed By: Microsoft
Product Name: Windows 7 Enterprise
Architecture & Build: 0x00000009 7601.winsp1_gdr.150202-1526
TTS Error: N/A
Validation Diagnostic:
Resolution Status: N/A (greyed out)
Licensing tab:
On a computer running Microsoft Windows non-core edition,run
'slui.exe 0x2a 0xC004F012' to display the error text.
Error: 0xC004F012
If I run 'slui.exe 0x2a 0xC004F012' I get the uniformative message popup "An error has occurred .. You can also contact Microsoft (a generic message) ... Details Code: 0xC004F012 Description: The Software Licensing Service reported that the call has
failed because the value for the input key was not found.
For "fun" I ran
cscript slmgr.vbs –rilc
but the licensing rebuild made no difference in the Windows 7 validation error
I would like to get the system to actually run a validation check and if necessary require the MAK key. What is the process to eliminate this bogus "software counterfeiting" state?

Thank you for your time considering this. The problem seems resolved.
I noticed that the path was missing for some Start menu items, the icons were not correct. The system environment variables TMP, TEMP, and windir had been deleted. The Windows Activation errors probably started shrotly after the system environment variable
were deleted.
After I restored the environment variables to their standard values, I ran WindowsActivationUpdate.exe, it went through the downloading update package, then installing update steps successfully.
With the standard environment parameters reestablished the MGADiag Copy function worked. I noticed then that it included a lot more information than what is displayed in the one popup window, similar in length to some of the other postings here with output
from MGADiag
In the course of troubleshooting the Activation error before posting here, I had issued the slmgr /rearm command to see if its action in resetting the activation timers would allow me to re-enter the MAK.
When WindowsActivationUpdate completed, then when I went to the Control Panel item for System. I was able to go through the validation process. Now the install is validated again.
Since the March Patch Tuesday set consisted of 12 updates I can't point the finger at any one for being the root of this problem.

FTP Validation error after updating to Muse 2014 - What am I missing?

I've updated from Muse CC to Muse 2014 as part of creative cloud. However, I'm now getting a validation error when I try to upload the site via ftp. I've checked all the fields. Any ideas?
This works with Muse CC:
This doesn't work with Muse 2014:
Thanks for any help!

Hi Kieran,
What happens when you enter, 'murphysicecream.ie' in the domain name?
- Abhishek Maurya

Error(may be) after validation

hi,
one of the client in developement environment has compiled some procedures on SQL Developer..
though the procedure got successfully validated(errors removed) but it leaves the following message..
o.d.r.utils.RaptorDbDisconnectListener An attempt to determine pending transaction for the just closed connection failed.
wht is that ??
is it of any concern...
thanks

Fyi, there's a dedicated SQL*Developer forum that might provide a better answer to this question.
SQL Developer

Validation Error after updating a SelectOneMenu via Ajax (DWR)

I have a <t:selectOneMenu> that is bound to a backing bean together with a <f:selectItems> that is bound to a SelectItems[] attribute in the same backing bean. See below:
<t:selectOneMenu forceId="true"
id="department"
value="#{DeptBean.departmentId}">
<f:selectItems value="#{DeptBean.departmentList}" />
</t:selectOneMenu>
When the user changes another field on my page, I use DWR to retrieve a new list of departments and update the <t:selectOneMenu> accordingly. That works just fine.
The problem is that if I select a value from the updated department list and then submit the page I get a "Validation Error".
I suspect that the JSF Component Tree still has the old list of values and does some validation which obviously fails.
Has anyone dealt with this before? Any ideas would be appreciated!

<t:selectOneMenu forceId="true"
id="department"
value="#{DeptBean.departmentId}">
<f:selectItems value="#{DeptBean.departmentList}"
/>
</t:selectOneMenu>What is the type of departmentId ? If it is not a String, then try making it a String and see if the issue is resolved. I am not sure if this will help you. But its worth a try.

Refresh of Master/Detail does not work after validation failure

After page validation stops further page processing of a Master Detail page, I get the following Oracle Error on display of the Detail portion :
<code>
ORA:01445: Cannot select ROWID from, or sample, a join view without a key preserved table.
ORA-06510 - PL/SQL unhandled user-defined exception.
</code>
Any clues as to why this might occur? The Master portion of the page displays fine along with the appropriate custom validation error message. It is just the detail portion (from a SQL based report) that is causing the problem. I do not use a ROWID either!
Thanks!

Just an FYI for everybody who may have this very same problem in the future. I fixed the error and it had nothing to do with ROWID or views or anything like that. Under the Page Rendering section where you define the region definition under the source section, I had included the 'order by' clause in my SQL statement. This was the cause of my ORA-01445 error! When I removed the clause from the source definition and instead included it within the Report Attributes by checking the Sort box for the appropriate column (thus allowing APEX to generate the sort for me), the error disappeared! The Oracle error message would NEVER have given me a clue into what caused the error. I just happened to think 'what if I take the order by clause out'! How's that for a flukey fix!

VPD "Lost" after validation fails

Hi,
We have a custom in house VPD. In the application security section, under VPD, we call a procedure which sets our security context client_id in order to be used to make context references within secure views.
In our page we have a simple select list which is run against a "secure" view. Once the user selects a value they hit continue to go on. A validation is put in place to make sure that a value has been selected.
If the validation fails, we go back to the page and the validation error message displays (as it should) however the select list has no values. After doing a lot of testing, references to any view that uses the VPD returns no values when a validation fails.
We've done some test and it appears that the following happens:
- On a page submit the VPD function gets called (as per the application security / vpd)
- Validations are performed
- If validation fails, run: dbms_session.clear_identifier;
- Load the page along with the appropriate error messages.
Is this correct? Is their anyway around this?
We have tried to set an application process to run before header which would run the same function as that called in the VPD section, however the process isn't run when a validation fails.
Thank you,
Martin

APEX sets client identifier to: APP_USER:APP_SESSION. CLIENT_INFO is set to just APP_USER. Try the following query from the SQL Workshop as well as a region on a page to give you a better idea of what APEX sets:select sys_context('USERENV','CURRENT_SCHEMA') CURRENT_SCHEMA,sys_context('USERENV','SESSION_USER') SESSION_USER,
sys_context('USERENV','MODULE') module,sys_context('USERENV','ACTION') action,
sys_context('USERENV','CLIENT_INFO') CLIENT_INFO, sys_context('USERENV','CLIENT_IDENTIFIER') CLIENT_IDENTIFIER
from dualI would probably include the IP Address of your HTTP Servers in the policy to make sure it's not someone connecting from SQL*Plus: sys_context('USERENV', 'IP_ADDRESS')
Tyler

Unable to login to apex as admin after apparent successful installation

I am unable to login to apex as admin after an apparent successful installation.
I have an existing Oracle database 11.2.0.1.0 with Oracle Text running on Windows 7 Professional with hundreds of gigabytes of free disk space available. I did everything as an operating system user with administrator privileges. I downloaded the latest version of apex 4.0.2 for all languages, unzipped the downloaded zip file, extracting all files to an apex directory. I changed the working directory to apex and started sql*plus, connected sys as sysdba, ran apexins.sql installation, apex_epg_config.sql and apexconf.sql configuration, apexchpwd.sql to change the admin password, and apxldimg.sql to copy the images, and exec dbms_xdb.sethttpport(8080), unlocked accounts, and granted connect privileges.
The installation log did not show any errors and included:
"Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the APEX_040000 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql)
http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex (Oracle HTTP Server with mod_plsql)
http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
JOB_QUEUE_PROCESSES: 1000"
When I use either browser, Firefox 3.6.12 or Internet Explorer 8.0, and go to http://localhost:8080/apex/apex_admin I get a screen that says:
"Enter Application Express internal administration credentials"
and has boxes for a username and password. When I enter admin and the admin_password that I selected, then click on login nothing happens. I don't get logged in. I don't get an error message. It does not show any signs of anything running. It just sits there. I also don't get any messages from Windows or Norton 360 indicating that a pop-up window was blocked or any such thing. I checked that the services are running and also tried shutting down the computer and re-starting (cold boot), but was still unable to login.
I am a retired developer, not a DBA, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and paste of everything that I could think of below. Oddly I don't see an admin user.
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select status from dba_registry where comp_id = 'APEX'
2 /
STATUS
VALID
SQL> select username, account_status
2 from   dba_users
3 where username = 'ANONYMOUS'
4 or     username like 'APEX%'
5 or     upper (username) = 'ADMIN'
6 order by username
7 /
USERNAME                       ACCOUNT_STATUS
ANONYMOUS                      EXPIRED
APEX_030200                    EXPIRED
APEX_040000                    OPEN
APEX_PUBLIC_USER               OPEN
SQL> select dbms_xdb.gethttpport from dual
2 /
GETHTTPPORT
       8080
SQL> select owa_util.get_version from dual
2 /
GET_VERSION
10.1.2.0.8
SQL> show parameter memory_target
NAME                                 TYPE        VALUE
memory_target                        big integer 1536M
SQL>

Are you sure you did give right path to script ? Yes.
>
If you extract files to folder c:\temp, you have after that folder c:\temp\apex and bunch of sub folders.
For script to update images, you give path to folder where you did extract apex install files.
In above case that is then c:\temp .
>I created a directory c:\apex on my laptop. I downloaded the zip file to that directory. When I extracted the files to folder c:\apex, the result was c:\apex\apex with a bunch of sub folders and files. When I ran the script, I gave the path c:\apex as indicated in my copy and paste. So, I did everything the same as in the quote above, except that I used apex instead of temp.
Try extract Apex install zip to c:\temp and give c:\temp as path for scriptAre you suggesting that I redo the entire installation using c:\temp instead of c:\apex? What difference would that make? Would I need to do some sort of uninstall first?

Validation error for non-null throws false error condition

I am trying to perform a DML (INSERT) with a form element (textbox) that has been disabled on the form.
The objective is to allow the user to:
1) disable a form element using javascript when a radio element is selected - works OK using an onclick event
2) user clicks a button to ENTER (perform a INSERT DML) - here the validation throws an error but I have enabled the previously disabled form element and I have used $x_Value() to input a value into the form element by onsubmit event on button.
If I remove the validation error trap the DML saves the appropriate value.
I can create two buttons and it works:
1 button to enable fields that were previously disabled
2 button to perform DML. (works if after button 1 I set focus on any form field with my mouse.)
Any help would be appreciated.
marshall

Knight,
Thanks for your interest in helping.
I am trying not to create a situation w/bugs and such. I think I can devise a work around but I would like a more "correct" solution. ;-)
To explain what I am doing I have a form that a person can use to enter a complaint. The person can give their last - middle - first name but they can also decide to be anonymous. If anonymous they click checkbox. Onclick of checkbox I fire javascript to disable name fields and place "Anonymous" in the last_name disabled field. The user can enter other data and when the user clicks ENTER I want to insert into the DB but the validation error trap of APEX sees a disabled field as a null. I want to place "Anonymous" in the last name field and then save the record with other data besides name.
To add to it - I can create two buttons 1-button enables and 2-button inserts and the same code works if I touch( give focus) to a field in between enabling and inserting into the DB
Does that help explain better.
Thanks again - hope you or someone can help - best regards.

Apex reload jquery after validation error

Similar Messages

Maybe you are looking for