APO Initial Column - How to load to BW

Hi Experts,
We are exporting SNP data to BW using a datasource.
SNP puts all previous data in the initial column, but BW has to source it from the start to do calculations in BW. There must be some workaround or a standard way to avoid the data build up in BW.
All ideas will be appreciated.

Hi Gersh,
Thank you for the reply.
I mapped Dimension ID to 0VERSION but still it is giving error.
In the validation it is saying as 0VERSION is empty but data is there in the BW system.
Please find the screen shot of the Transformation file and the error.
Thanks in advance
Venkat

Similar Messages

SQL*Loader - How to load only a few columns from a .csv file to ora table

Hi there,
Could anyone please let me know how to load few columns from a .csv
file into a oracle table using SQL*Loader.
I know how to create a .dat and .ctl file and run the sql loader.
Suppose I have a .csv file with
col1, col2, col3, col4
and I only need to load col1 and col3 into col_a and col_b respectively
in table_a?
structure of table_ a
col_a,
col_b
Please advice

Try like..it i will work..
LOAD DATA
INFILE 'test.txt'
LOAD DATA
TRUNCATE INTO TABLE T1
FIELDS TERMINATED BY ','
(col1,
col2 FILLER,
col3,
col4 FILLER
)

How to set initial column widths for a table

What I'd like to do is to control the initial column widths for a table.
I'm building the table by using a class which extends AbstractTableModel. This class takes care of setting the headers and reading the data for the table.
If I do the following:
VarTableModel vtm = new VarTableModel(vi);
JTable jt = new JTable(vtm);
JScrollPane jsp = new JScrollPane(jt);
frame.getContentPane().add(jsp);
frame.setVisible(true);
I will see a table in my window. The widths of the columns are equal and are a function of the horizontal dimension of the window.
I have tried to set the width of a column by doing the following:
TableColumn aColumn;
aColumn = jt.getColumn(vtm.getColumnName(0));
aColumn.setWidth(40);
But this has no effect on what gets displayed. I can force the widths that I want by using 'setMaxWidth' but this has the unfortunate side effect of not allowing the user to make the column wider if they want.
What I'd like is a way to specify the widths of the columns when initially displayed and then let the user adjust to their liking.
I'm sure that there is a way to do this, but I don't seem to understand where to intervene in the process to produce the effect that I want.
Any help or suggestions will be greatly appreciated!

Table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
add this line and try ur codeThanks for the suggestion! Unfortunately, it doesn't seem to do the trick. Here is an abbreviated segment of my code:
vtm = new VarTableModel(vi);
JTable jt = new JTable(vtm);
// we want a horizontal scrollbar, so turn resizing off
// and we want to control column widths
jt.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
aColumn = jt.getColumn(vtm.getColumnName(0));
aColumn.setWidth(40);
. // same kind of thing for each column
aColumn = jt.getColumn(vtm.getColumnName(4));
aColumn.setWidth(400);
JScrollPane jsp = new JScrollPane(jt);
frame.getContentPane().add(jsp);
frame.setVisible(true);
If I do the above, the table gets displayed with each of the five columns the exact same width. So, the sizing of the columns is happening somewhere else despite turning auto resizing off.
Where is that occurring and how can I intervene so that I can control the widths of the columns on initial display and still allow the user to adjust the widths if they so choose?

SNP: How to "lock" initial column in SNP data view (SCM7.0 / SP8)

Hello experts,
after a change from SCM5.0 to SCM7.0 we are seeing a change in a tiny but very important capability and we are trying to re-establish it in SCM7.0. If somebody has an idea how to address this that would be of great help:
As of SCM5.0 users were able to lock the INITIAL column of an SNP DataView so that the column is the default start column and not the next future column. In SCM5.0 the solution had 2 elements
A) set a user parameter in SU01 called /SAPAPO/SDP_STARTCOL to value X
+
B) double-click the header of the initial column in the SNP data view
As of SCM7.0 this is not supported anymore. There is a certain user setting in an SNP data view (Settings --> Others --> "Period from last selection" ) but this is not behaving to our needs and SAP is saying what we want from SCM5.0 is a non-supported feature in SCM7.0.
So, does anybody have an idea how to solve this. I checked UserExits and BAdis in SPRO for interactive planning - there all kind of stuff but nothing having a method to allow / perform a "column locking" in an SNP Data view. Thanks for any tip or hint here.
Regards
Thomas

Hello jejeje,
thanks for your efforts - what you describe is something users have found out on our side too - a problem remains: you can save this setting "Period from last Selection" and it brings you to the INITIAL column but: once you have scrolled forward in the SNP data view (so that the INITIAL column has disappeared) and you leave the SNP data view or select another product ... it "remembers" that you last time left the data view NOT having INITIAL column as a start column.
So, my users say that they scroll back to INITIAL column before selecting another part or using another SelectionID or leaving the SNP data view ... and of course they hate this since they have to do this a few hundred times a day worse case.
We had a call open to SAP on this and I told them that is about productivity and usabaliity issue moving from SCM5.0 to SCM7.0 - but they have nothing more to say than "not supported anymore" - and the ultimate solution is / will be to modifiy SAP SCM standard coding - unless somebody from SAP is reading the discussioons here and is dedicated to help their customers which pay millions every year into SAP support fees.
Thanks for your responses and effort !
Regards
Thomas

How to load image in Long Raw column?

Dear all,
I need to upload a jpg image to a Long Raw column in one of our tables. Is there a way or utility so that I can do this thru a PL/SQL code? Please help.
Regards,
Amit

You must not be using LONG data type. It has been deprecated. You must be using BLOB. Here is an extract from AskTom.com on how to load a file into BLOB field.
create table demo
( id        int primary key,
theBlob    blob
create or replace directory my_files as '/export/home/tkyte/public_html';
declare
    l_blob    blob;
    l_bfile    bfile;
begin
    insert into demo values ( 1, empty_blob() )
    returning theBlob into l_blob;
    l_bfile := bfilename( 'MY_FILES', 'aria.gif' );
    dbms_lob.fileopen( l_bfile );
    dbms_lob.loadfromfile( l_blob, l_bfile,
                               dbms_lob.getlength( l_bfile ) );
    dbms_lob.fileclose( l_bfile );
end;
/Below is the link for the same.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:232814159006

How to load bookmark tree in initial view setting by pdfmark reference

how to load bookmark tree in initial view setting by pdfmark reference

You are talking about two different completely unrelated things here: The
initial view (which can be modified in an epilogue.ps file) and the actual
bookmark setup (which is done in the PostScript file, and not in the
epilogue file). You can change which navigation pane gets displayed
when the PDF file is opened, but only the application that creates the
bookmarks as access to he setting that defines if the bookmark is expanded
or not.
By the time the epilogue file runs, you don't "know" which bookmarks were
created. You can know that if you redefine the pdfmark command in
PostScript, and then modify the parameters that are passed to the real
pdfmark operator.
Another option would be to add JavaScript that controls the state of your
bookmarks that gets executed the first time the document is opened. This
will however only work in Adobe Acrobat, not the free Reader (the open
property is read-only in Reader).
The simplest way to get your bookmarks in the correct state, is to create
your PDF files and then run an action on them to expand the bookmark tree.
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com
On Mon, Feb 24, 2014 at 7:44 AM, Manoranjan.Parhi

Load image file into a LONG RAW column via SQL*Loader

Does anyone know how to load a image file into a LONG RAW column via SQL*Loader?
Thanks
-Hsing-Hua-

Are you trying to import the image on the client into Oracle lite, or from the server end into the main oracle database for download to the client?
On our system images are loaded into the the oracle lite database (10g R1 at the moment) on the client (DELL X50 PDA's) into a BLOB (Not LONG RAW) column using Java (relatively standard functionality in Java) as this is what our application software is written in.
From the server end, we do not at the moment load images as such, but we do load the application software into the database for deployment of new versions to the clients (the DMC/DMS updates we have found very unreliable), and the technique should be the same for images. Again the file is imported into a BLOB column.
NOTE a column defined as BLOB on the main Oracle database appears as a LONG VARBINARY on the client Oracle lite database, but the synchronisation process handles the conversion with no problem.
To import into a BLOB column on the server try the following
1) you will need to create a DIRECTORY (CREATE DIRECTORY command) within the database, pointing at a directory on the database server (or accessible from it). This is needed for the file location.
CREATE OR REPLACE DIRECTORY PDA_FILE_UPLOAD AS '/pdaapps/jar/'
NOTE create directory needs to be run as SYSTEM
2) define your table to hold the image and other data. Our tables is
SQL> desc pda_applications
Name Null? Type
ID NOT NULL NUMBER(12)
PDAAT_CODE NOT NULL VARCHAR2(10)
VERSION NOT NULL NUMBER(5,2)
PART_NO NOT NULL NUMBER(3)
FILE_OBJECT BLOB
DEPLOY_APPLICATION_YN NOT NULL VARCHAR2(1)
3) copy the image (or in our case a .jar file) to the database server directory specified in step 1
4) the actual import is done using a DBMB_LOB procedure
PROCEDURE pr_load_file
Module Name : pr_load_file
Description : Main call. Create a new pda_applications record, and import the specified file into it
Version History:
Vers. Author Date Reason
1.0 G Wilkinson 03/02/2006 Initial Version.
(PA_VERSION IN NUMBER
,PA_FILENAME IN VARCHAR2
,PA_PDAAT_CODE IN VARCHAR2
,PA_PART_NO IN NUMBER DEFAULT 1
,PA_DEPLOY IN VARCHAR2 DEFAULT 'Y')
IS
l_FileLocator BFILE;
l_blobLocator BLOB;
l_seq NUMBER;
l_location VARCHAR2(20);
no_params EXCEPTION;
call_fail EXCEPTION;
BEGIN
-- Throw error if required details not present
IF pa_version IS NULL
OR pa_filename IS NULL
OR pa_pdaat_code IS NULL THEN
RAISE no_params;
END IF;
-- Initialize the BLOB locator for writing. Note that we have
-- to import a blob into a table as part of a SELECT FOR UPDATE. This locks the row,
-- and is a requirement for LOADFROMFILE.
SELECT pdaa_id_seq.nextval
INTO l_seq
FROM dual;
-- First create the application record (file is imported by update, not insert
INSERT INTO pda_applications
(ID,PDAAT_CODE,VERSION,PART_NO,FILE_OBJECT,DEPLOY_APPLICATION_YN)
VALUES (l_seq,pa_pdaat_code,pa_version,pa_part_no,EMPTY_BLOB(),pa_deploy);
-- Lock record for update to import the file
SELECT file_object INTO l_blobLocator
FROM pda_applications
WHERE id=l_seq
FOR UPDATE;
-- Initialize the BFILE locator for reading.
l_FileLocator := BFILENAME('PDA_FILE_UPLOAD', pa_filename);
DBMS_LOB.FILEOPEN(l_FileLocator, DBMS_LOB.FILE_READONLY);
-- Load the entire file into the character LOB.
-- This is necessary so that we have the data in
-- character rather than RAW variables.
DBMS_LOB.LOADFROMFILE(l_blobLocator, l_FileLocator
,DBMS_LOB.GETLENGTH(l_FileLocator)
,src_offset => 1);
-- Clean up.
DBMS_LOB.FILECLOSE(l_FileLocator);
-- Create download records for each user associated with the application for sending to the PDA's
-- to install the software
IF pa_deploy = 'Y' then
IF fn_deploy (pa_pdaa_id => l_seq
,pa_pdaat_code => pa_pdaat_code) != 'SUCCESS' THEN
RAISE call_fail;
END IF;
END IF;
EXCEPTION
WHEN no_params THEN
pkg_appm.pr_log_message( pa_mdl_name => g_module_name
, pa_mdl_version => fn_get_body_version
, pa_error_code => SQLCODE
, pa_location => l_location
, pa_text => 'Missing parameters'
, pa_severity => 'E'
WHEN OTHERS THEN
DBMS_LOB.FILECLOSE(l_FileLocator);
pkg_appm.pr_log_message( pa_mdl_name => g_module_name
, pa_mdl_version => fn_get_body_version
, pa_error_code => SQLCODE
, pa_location => l_location
, pa_text => SQLERRM
, pa_severity => 'E'
END pr_load_file;
I hope this may be of some help

Macro to paint initial column grey

Hello All,
I am trying to change the background color from the initial column in APO SNP, but I have no experience in writing macros.
I found out that I can Use CELL_BG() with X= 8 but now I am on the end. Could anybody give me a hint how to go on?
Regards
SK
Now i can change the color of the first cell in grey
but what can i do that the macro goes down all cells in the row to paint them grey
Here what I did:
step (paint cell: (38 Iterations: Initial; M05.2013)
Cell: RSFC (Initial) (Attributes) =
Operator: CELL_BG( 8 )
Can anybody help?
Edited by: Skanderbeg on Jun 9, 2011 4:18 PM

Hi SK,
The CELL_BG( X ) can be applied to a row or a cell.
To change background color of one cell follow the below process:
1.Create a step with one iteration
2.Assign the desired cell with CELL_BG ( X ) -X being the color code
To change the background color of n cells within one row just increase the number of iterations in that step to n.
For one column the only option I can think of is to assign each cell for that column with the desired color one by one i.e to follow first process and add the desired cells in step 2.
Let me know if this helps!!
Regards,
Jatin

How to load site in a reinstalled Dreamweaver

Hello,
I had to move from a desktop PC to a laptop. I had to install
Studio 8 all over again and I have all the files I was using
earlier in my desktop.
When starting Dreamveaver I can see the folder structure in
"files/assets/snippets" but I don't know how to load the main
folder where my work is stored. (Where was doing my work earlier in
the desktop)
Example:
I was working with a site named A. This is a folder named "A
" that should appear under the "files/assets/snippets" window.
All I see after the reinstall is the Desktop and all the
folders in my HD along with the folder that I was working with.
The "Manage Sites" small window is blank right now.
How do I place the folder (site?) "A" back in the
"Files/Assets/Snippets" column so I can open my HTML's already
created, access the icons and other folders below "A" ?
thank you
pakoppan

"> The "Manage Sites" small window is blank right now.
Did you export your site definitions to a folder that you
could move by FTP
or portable device to the laptop? If so, all you need to do
is import the
site definitions and make sure your folder structure is
identical to your
other computer.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development

How To Load a Project Budget Line Through API in R12 ?

Hello
Could you please let me know how to load the project budget lines through API in R12 system, I am trying with below script but it is not working.
Could you please let me know if you have any solution.
=========================================================================================================================================================================
Script
DECLARE
--––variables needed for API standard parameters
   l_api_version_number     NUMBER                                 := 1.0;
   l_commit                 VARCHAR2 (1)                           := 'T';
   l_return_status          VARCHAR2 (1);
   l_init_msg_list          VARCHAR2 (1);
   l_msg_count              NUMBER;
   l_msg_data               VARCHAR2 (2000);
   l_data                   VARCHAR2 (2000);
   l_msg_entity             VARCHAR2 (100);
   l_msg_entity_index       NUMBER;
   l_msg_index              NUMBER;
   l_msg_index_out          NUMBER;
   l_encoded                VARCHAR2 (1);
   i                        NUMBER;
   a                        NUMBER;
--––variables needed for Oracle Project specific parameters
   l_pm_product_code        VARCHAR2 (100);
   l_pa_project_id          NUMBER;
   l_pm_project_reference   VARCHAR2 (100);
   l_budget_type_code       VARCHAR2 (30);
   l_change_reason_code     VARCHAR2 (30);
   l_description            VARCHAR2 (255);
   l_entry_method_code      VARCHAR2 (30);
   l_resource_list_name     VARCHAR2 (60);
   l_resource_list_id       NUMBER;
   l_budget_lines_in        pa_budget_pub.budget_line_in_tbl_type;
   l_budget_lines_in_rec    pa_budget_pub.budget_line_in_rec_type;
   l_budget_lines_out       pa_budget_pub.budget_line_out_tbl_type;
   l_line_index             NUMBER;
   l_line_return_status     VARCHAR2 (1);
   l_user_id                NUMBER;
   l_responsibility_id      NUMBER;
   API_ERROR                EXCEPTION;
BEGIN
   -- SET GLOBAL INFO
   SELECT user_id,
          responsibility_id
     INTO l_user_id,
          l_responsibility_id
     FROM pa_user_resp_v
    WHERE user_name = 'RAJU';
   PA_INTERFACE_UTILS_PUB.SET_GLOBAL_INFO (p_api_version_number      => 1.0,
p_responsibility_id       => l_responsibility_id,
p_user_id                 => l_user_id,
                                           p_msg_count               => l_msg_count,
p_msg_data                => l_msg_data,
p_return_status           => l_return_status
   IF l_return_status != 'S'
   THEN
      RAISE API_ERROR;
   END IF;
--––PRODUCT RELATED DATA
   l_pm_product_code        := 'GMS';
--––BUDGET DATA
   l_pa_project_id          := 6271;
   l_pm_project_reference   := NULL;--'ABC';
   l_budget_type_code       := 'FC';
   -- l_change_reason_code := 'INITIAL';
   l_description            := 'New description –> 2';
   l_entry_method_code      := 'PA_TASKLVL_BASELINE';
   l_resource_list_id       := 1001;
--––BUDGET LINES DATA
   a                := 1;
   FOR i IN 1 .. a
   LOOP
      l_budget_lines_in_rec.pa_task_id := 405156;
      l_budget_lines_in_rec.pm_task_reference       := NULL;
      l_budget_lines_in_rec.resource_alias          := 'Labor';
      l_budget_lines_in_rec.resource_list_member_id := '1034';
      -- l_budget_lines_in_rec.budget_start_date        := '01-Jan-13';
      -- l_budget_lines_in_rec.budget_end_date          := '31-Dec-14';
      -- l_budget_lines_in_rec.period_name          := 'JUL-10FY2011';
      l_budget_lines_in_rec.description             := 'Some Text';
      l_budget_lines_in_rec.quantity := 100.00;
      l_budget_lines_in_rec.raw_cost := 300.00;
      l_budget_lines_in (i)                         := l_budget_lines_in_rec;
   END LOOP;
--––INIT_BUDGET
   pa_budget_pub.init_budget;
--––LOAD_BUDGET_LINE
   FOR i IN 1 .. a
   LOOP
      pa_budget_pub.load_budget_line
                        (p_api_version_number           => l_api_version_number,
p_return_status                => l_return_status,
                         p_pa_task_id                   => l_budget_lines_in (i).pa_task_id,
p_pm_task_reference            => l_budget_lines_in (i).pm_task_reference,
p_resource_alias               => l_budget_lines_in (i).resource_alias,
p_resource_list_member_id      => l_budget_lines_in (i).resource_list_member_id,
p_budget_start_date            => l_budget_lines_in (i).budget_start_date,
                         p_budget_end_date              => l_budget_lines_in (i).budget_end_date,
p_period_name                  => l_budget_lines_in (i).period_name,
p_description                  => l_budget_lines_in (i).description,
                         p_raw_cost                     => l_budget_lines_in (i).raw_cost,
p_burdened_cost                => l_budget_lines_in (i).burdened_cost,
p_revenue                      => l_budget_lines_in (i).revenue,
p_quantity                     => l_budget_lines_in (i).quantity
   END LOOP;
   IF l_return_status != 'S'
   THEN
      RAISE api_error;
   END IF;
--––EXECUTE_CREATE_DRAFT_BUDGET
    pa_budget_pub.execute_create_draft_budget (p_api_version_number        => l_api_version_number,
p_msg_count                 => l_msg_count,
p_msg_data                  => l_msg_data,
p_return_status             => l_return_status,
p_pm_product_code           => l_pm_product_code,
                                              p_pa_project_id             => l_pa_project_id,
p_pm_project_reference      => l_pm_project_reference,
p_budget_type_code          => l_budget_type_code,
p_change_reason_code        => l_change_reason_code,
p_description               => l_description,
                                              p_entry_method_code         => l_entry_method_code,
p_resource_list_name        => l_resource_list_name,
p_resource_list_id          => l_resource_list_id
   IF l_return_status != 'S'
   THEN
      NULL; --––RAISE API_ERROR;
   END IF;
--––FETCH_LINE
   FOR l_line_index IN 1 .. pa_budget_pub.g_budget_lines_tbl_count
   LOOP
      pa_budget_pub.fetch_budget_line (p_api_version_number      => l_api_version_number,
p_return_status           => l_return_status,
p_line_index              => l_line_index,
p_line_return_status      => l_line_return_status
      IF l_return_status != 'S' OR l_line_return_status != 'S'
      THEN
         RAISE api_error;
      END IF;
   END LOOP;
--––CLEAR_BUDGET
   pa_budget_pub.clear_budget;
   IF l_return_status != 'S'
   THEN
      RAISE api_error;
   END IF;
--––HANDLE EXCEPTIONS
EXCEPTION
   WHEN api_error
   THEN
      FOR i IN 1 .. l_msg_count
      LOOP
         pa_interface_utils_pub.get_messages (p_msg_data           => l_msg_data,
p_data               => l_data,
p_msg_count          => l_msg_count,
p_msg_index_out      => l_msg_index_out
         DBMS_OUTPUT.put_line ('Error Mesg ' || l_data);
         DBMS_OUTPUT.put_line ('Error Mesg ' || l_msg_data);
      END LOOP;
   WHEN OTHERS
   THEN
      FOR i IN 1 .. l_msg_count
      LOOP
         pa_interface_utils_pub.get_messages (p_msg_data           => l_msg_data,
p_data               => l_data,
                                              p_msg_count          => l_msg_count,
p_msg_index_out      => l_msg_index_out
         DBMS_OUTPUT.put_line ('error mesg ' || l_data);
      END LOOP;
END;
=========================================================================================================================================================================

Not knowing how its embedded... you will need to get the report instance from the dll and cast it as a ReportDocument object.
Given the info so far, that is all we can say.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How to load a boot image to cisco aironet 1140 series after missing boot image

Hi all,
I need a solution for this. When i switch my cisco aironet 1140 , it s blinking with red light .and gives a message "no boot image to load".
When i tried next time, by pressing escape it shows this message that i have mentioned below.
ap:
ap:
using eeprom values
WRDTR,CLKTR: 0x83000800 0x40000000
RQDC ,RFDC : 0x80000035 0x00000208
using ÿÿÿÿ ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x83000800, 0x40000000
RQDC, RFDC : 0x80000035, 0x00000208
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is NOT up.
PCIE1 port 1 not initialized
PCIEx: initialization done
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 32383488
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 28:94:0f:d6:c8:62
Ethernet speed is 100 Mb - FULL duplex
The system is unable to boot automatically because there
are no bootable files.
C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Compiled Tue 18-Oct-11 14:51 by prod_rel_team
ap:
So , now my question is how to load the boot image ? From where will we get this ? OR
I m also having another Cisco aironet 1140 , Can i get bootimage from that . Kindly let me know the solution from genius ?

Take a look at this link as it should have the info you need
https://supportforums.cisco.com/docs/DOC-14636
Sent from Cisco Technical Support iPhone App

How to load BeginningBalance and movements into HFM via FDM from ERPI

I have a file generated by ERPI with the columns of |AMOUNT|BEGIN_BALANCE_DR|BEGIN_BALANCE_CR|PERIOD_NET_DR|PERIOD_NET_CR|
among many other columns.
How can load them via FDM into the Custom1 dimension in HFM, which contains BeginningBalance, Additions, Disposals, etc.
So basically I will have a trial balance, which I can compare with GL and OBI.

Hello
You can use the IDOC SOPGEN01 for that purpose.
Please check transaction WE60 for IDOC documentation and there are many old threads with information about this IDOC.
BR
Caetano

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
    v_full_filename         varchar2(500);
    v_server_path           varchar2(2000);
    v_separator             VARCHAR2(1);
    v_filename              VARCHAR2(400);
    filename                VARCHAR2 (100);
    v_stop_load             varchar2 (2000);
    v_rec_error_log         varchar2(4000);
    v_error_log             varchar2(4000);
    ctr                     NUMBER (12);
    cols                    NUMBER (2);
    btn                     number;
    RES                     BOOLEAN;
    application             ole2.obj_type;
    workbooks               ole2.obj_type;
    workbook                ole2.obj_type;
    worksheets              ole2.obj_type;
    worksheet               ole2.obj_type;
    cell                    ole2.obj_type;
    cellType                ole2.OBJ_TYPE;
    args                    ole2.obj_type;
    PROCEDURE olearg
    IS
    args   ole2.obj_type;
    BEGIN
    args := ole2.create_arglist;
    ole2.add_arg (args, ctr);
    ole2.add_arg (args, cols);
    cell := ole2.get_obj_property (worksheet, 'Cells', args);
    ole2.destroy_arglist (args);
    END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
                                 ,file_name      => null
                                 ,file_filter    => 'Excel files (*.xls)|*.xls|'
                                                                        ||'Excel files (*.xlsx)|*.xlsx|'
                                 ,message        => 'Choose Excel file'
                                 ,dialog_type    => null
                                 ,select_file    => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
    filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
    application := ole2.create_obj ('Excel.Application');
    ole2.set_property (application, 'Visible', 'false');
    workbooks := ole2.get_obj_property (application, 'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg (args, filename); -- file path and name
    workbook := ole2.get_obj_property(workbooks,'Open',args);
    ole2.destroy_arglist (args);
    args := ole2.create_arglist;
    ole2.add_arg (args, 'Sheet1');
    worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
    ole2.destroy_arglist (args);
    ctr := 2;                                                     --row number
    cols := 1;                                                -- column number
    go_block('xxx');
    FIRST_RECORD;
    LOOP
            --Column 1 VALUE --------------------------------------------------------------------
        olearg;
        v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        :item1 := v_stop_load;
        cols := cols + 1;
          --Column 2 VALUE --------------------------------------------------------------------
        olearg;
        :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        cols := cols + 1;
        --<and so on>
    ole2.invoke (application, 'Quit');
    ole2.RELEASE_OBJ (cell);
    ole2.RELEASE_OBJ (worksheet);
    ole2.RELEASE_OBJ (worksheets);
    ole2.RELEASE_OBJ (workbook);
    ole2.RELEASE_OBJ (workbooks);
    ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

How to load flatfiles using Owb?

Hai all,
I would like to access a flat file (.csv files) using owb. I am able to import the files into source module of owb. But while executing the mapping , I got the following error...
Starting Execution MAP_CSV_OWB
Starting Task MAP_CSV_OWB
SQL*Loader: Release 10.1.0.2.0 - Production on Fri Aug 11 16:34:22 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Control File: C:\OWBTraining\owb\temp\MAP_CSV_OWB.ctl
Character Set WE8MSWIN1252 specified for all input.
Data File: \\01hw075862\owbfiles\employee.csv
File processing option string: "STR X'0A'"
Bad File: C:\OWBTraining\owb\temp\employee.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 200 rows, maximum of 50000 bytes
Continuation: none specified
Path used: Conventional
Table "OWNER_STG"."EMP_EXCEL", loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
"EMPNO" 1 * , CHARACTER
"EMPNAME" NEXT * , CHARACTER
value used for ROWS parameter changed from 200 to 96
SQL*Loader-500: Unable to open file (\\01hw075862\owbfiles\employee.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
Table "OWNER_STG"."EMP_EXCEL":
0 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 49536 bytes(96 rows)
Read buffer bytes: 65536
Total logical records skipped: 0
Total logical records read: 0
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Fri Aug 11 16:34:22 2006
Run ended on Fri Aug 11 16:34:22 2006
Elapsed time was: 00:00:00.09
CPU time was: 00:00:00.03
RPE-01013: SQL Loader reported error condition, number 1.
Completing Task MAP_CSV_OWB
Completing Execution MAP_CSV_OWB
could you please help me..
thanks and regards
gowtham sen.

Thank you my friends.
As you said, I gave the file name as wrong.
Its solved. Thank you....
I have another probem.
How to load data from excel file to owb? Is it possible the way we do for flat files?
I did using ODBC + HS Services.
But after creating a mapping , and its deploying I got the following error.
"error occurred when looking up remote object <unspecified>.EmployeeRange@EXCEL_SID.US.ORACLE.COM@DEST_LOCATION_EXCEL_SOURCE_LOC
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
Could you please help me..
Thanks and regards
Gowtham

APO Initial Column - How to load to BW

Similar Messages

Maybe you are looking for