App using Pro*C 8.1.7 has problem with remote 9i database

Someone must have encountered and overcome this by now:
A very simple application using Pro*C 8.1.7 connects properly to remote 8i databases, both at my development site and at my customers.
When I attempt to connect to a 9i (9.2.0.1.0) database, everything starts out great: the database OPEN works, and I can execute an ALTER SESSION, SET AUTOCOMMIT ON, INSERT, and one SELECT. The second SELECT blows up in ORASQL8.dll, apparently branching to 0.
Looks like some unincluded dll, or maybe a buffer not long enough. I don't have Pro*C for 9i, and while I don't mind having to get it and relink this, I can't believe that everyone's 8i applications have to be relinked to run against a higher level database.
Any ideas or experiences will be greatly appreciated.

we had the problem and this fixed it.
try connecting to remote client using dedicated server.
some firewalls block the outgoing ports while still leaving (incoming) 1521 open.
net8 assistant>local>profile>general(dropdown)>routing(tab)
checkbox (check)always use dedicated server.
reply if helps
CW

Similar Messages

TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

This morning i was not able to hear sound on my recently purchased macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

I have got new hardrive windows 8.1 and i have downloaded PS, LE and AE...Clouds...when i open PC so i get massage on rigth corner short time." your photoshop has problem with compalitet"....i have not put things back or used PS,,,what shall i do? LR work

i have got new hardrive to windows 8.1....when i open my PC so i get message on lower right corner - very short time - your photoshop has problem with compalitet....i have not used it yet or put brushes and so on back....LR is working fine...i can open photoshop without problem..and AE...what shall i do?...

Thanks for info:
A. Backup before doing anything advanced is recommended but not widely used.
B. Upgrade on vanilla plain (and updated) operatiing system goes flawlessly. Upgrade on "real" computer may depend on "status" of operating system and applications installed. You may not be the last experiencing troubles.
C. Software vendors expect that users has nearly unlimited disk size, large memory and latest processor.
D. It is on you to find anything positive to compensate annoyances. Mental balance is in your hands ;-)

Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it

Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it and Message flashes "Device disconnected or not available

Hi
Hope you found a solution by now.
I reply because others might encounter the same problem.
Mine was the one described here:
https://discussions.apple.com/thread/2656776?start=0&tstart=0
I also installed the latest version ov Mobile Partner (16.x)
Cheers,
Nick

Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

Hello!
I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
Happy Searching!
Ps - if you switch I wouldn't go to Blackberry.

FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
However, do not look for any results for above two weeks.
Roger

The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives. I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ). The statement was true at the time it was written and has nothing to do with memory problems.
Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too. I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon. Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works. I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition. As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers. But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time. One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces. Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code. But, knowing my source, it may all be fiction.
The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ. If you send me the full part numbers I will check the specifications a get back to you. Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
Roger

Problems with Remote App on iOS 4?

I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
Are there any known problems with iOS 4 and Apple TV?

Chenks wrote:
maybe for you, but isn't for me.
i have the remote app on my iphone4 and it's connected to 2 appletv's.
i don't experience any dropping of connection etc.
May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

I just recently purchased 3 songs from itunes not knowing that I had no money on my debit card (visa) left. My iphone wont let me update my apps and says that there was a billing problem with my last purchase. I dont know what I am supposed to do!

I just recently purchased 3 songs from itunes not knowing that I had no money on my debit card (visa) left. My iphone wont let me update my apps and says that there was a billing problem with my last purchase. I dont know what I am supposed to do! I dont understand why it worked in the first place when it wasn't supposed to!

There seems to be a billing problem with the iTS. I've been trying to make purchases today (Dec 9th) too and it reports either the iTS can not process payments or it says my card was declined. I even changed the payment method to Paypal (which is never declined) and still no go.
I don't think it is "you" but a problem at Apple. Some popular new apps were released recently like Logic Pro and perhaps they're getting bombarded as they did when Lion was released.
Wait a few hours and then try again.

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

Nik Software Crash: "Could not complete the Color Efex Pro 4 command because of a problem with-"

Nik Software/Photoshop Crash: "Could not complete the Color Efex Pro 4 command because of a problem with the filter module interface." Define, Viveza work fine, the others, Color Efex, HDR Efex, Silver Efex don't. I called Nik and they said they were familiar with this problem and that it was an Adobe problem. They helped me uninstall and re-install the latest version of the filters. Didn't fix the problem. I called Adobe technical support, they confirmed that indeed it was an Adobe problem, but, they can't help me because they no longer offer support on CS5. I'm on an iMac with Mountian Lion 10.8.5, running Photoshop CS5.1. I searched the internet and found this problem mentioned in several places, just couldn't find the fix. Interesting coincidence - I had been using Photoshop and the Nik software perfectly fine, even the morning of the day it began to crash. I got a pop-up message from Adobe asking if they could anonymously monitor my usage to better their products. I clicked on "Ask me later." Then, my product crashed every time I tried to use the above-mentioned Nik software filters. ??? Why would they want to monitor my usage of a product they won't/don't support anyway? Help someone please - I really love the Nik software. I paid top dollar for it back in the day because people like Dan Hughes actually answered your questions themselves. The customer support was the best in the industry. The opposite is true of Adobe, is it not?

Thank you so much Chris. I know I'm not the only person to run into this as both Nik/Google and Adobe acknowledged this problem. I did however try something else to try and isolate the issue further. I tried editing with Nik/Google Color Efex & Silver Efex, etc., in Aperture, and sure enough, the Nik/Google filters wouldn't open, or they would crash Aperture. So - it's looking like a Nik/Google problem. They used to be so good. The crazy thing is that I had been using Photoshop with the Nik filters just fine, even earlier that very day. What could have gone wrong? Was there some kind of automatic update Saturday 3/1/14? And it was especially weird that it happened immediately after I refused to allow Adobe to (anonymously) monitor my usage. I'll call Nik/Google back tomorrow and tell them what you've told me, as well as letting them know their filters crashed Aperture too. I'll report back as soon as I find a fix. I know I'm not the only one out there who's experienced this.
Thanks again!

Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

Firefox has problems with images.
In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
I use Ubuntu.
Does anyone else have similar problems? Or know where the problem lies?

Do you have the latest driver for your graphics display card?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Hi,
yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
1. closing the app and reopen it
2. restart the iPad
3. restore the iPad via iTunes
4. Begging the app to work again.

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

PC Suite has problem with 3120

PC Suite has problem with 3120

I also have detected the problem. It is not any physical malfunction according to me. It occures with my phone when I unplug it and plug it again. Sometimes is useful to change the USB port and afterwards to move back to the previous one. Try it and also try it combined with PC restart. It is a weird problem!?

App using Pro*C 8.1.7 has problem with remote 9i database

Similar Messages

Maybe you are looking for