App-v 5.0: howto mount and dismount via powershell (just for testing purposes)

Hi,
Please advise howto easily mount an App-v package and full remove it afterwards (when ok).
This only to test the package is ok on a machine without the need to put it into sccm or a management server.
J.
Jan Hoedt

Hi,
this article is a must have to read abour PoSh cmdlets and App-V5.
If you want to test you can:
Get-AppvClientPackage | Mount-AppvClientPackage
This command, gets all your published App-V packages and mount them to 100%.
If you want to remove a package which is published to you, you can use:
Get-AppvClientPackage -name *yourpackage* | Stop-AppvClientPackage | Repair-AppvClientPackage | Unpublish-AppvClientPackage | Remove-AppvClientPackage
to remove it. I alsways stop, and repair it first, so I'm sure all user changes are removed also.
Keep in mind, the remove-cmdlet need elevated rights.

Similar Messages

RAC ASM diskgroup mounted and dismounted so frequent

Hi,
We have installed a Oracle 10g RAC with ASM.
It was going well, but we found some messages in the alertlog as follows:
Mon Jan 22 08:43:45 2007
Thread 2 advanced to log sequence 1113
Current log# 9 seq# 1113 mem# 0: +DATA/dvpc/onlinelog/group_9.284.609078417
Current log# 9 seq# 1113 mem# 1: +FLASH/dvpc/onlinelog/group_9.265.609078421
Mon Jan 22 08:43:45 2007
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
Mon Jan 22 11:28:41 2007
Thread 2 advanced to log sequence 1114
Current log# 10 seq# 1114 mem# 0: +DATA/dvpc/onlinelog/group_10.285.609078423
Current log# 10 seq# 1114 mem# 1: +FLASH/dvpc/onlinelog/group_10.266.609078425
Mon Jan 22 11:28:41 2007
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
Mon Jan 22 14:12:02 2007
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
Mon Jan 22 14:12:02 2007
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
SUCCESS: diskgroup LOG was mounted
SUCCESS: diskgroup LOG was dismounted
Why these diskgroups mounted and dismounted so frequent?

Yes, diskgroup needs to be mounted before it can be written to;) And because there are only archive logs in the LOG diskgroup it's unmounted when archiving is done.
What's a bit odd is that the "normal" archival messages seem to be missing from alert.log.

Have a test version in use for testing purposes and want to buy it now without loosung the files. How to do so?

I've a test version in use for testing purposes and want to buy it now without loosung the files.

Just buy it and enter your serial key.

How to set PropertyBag Key and value at farm and sitecollection via PowerShell

Hi,
how could i create PropertyBag Key and value at farm and sitecollection via PowerShell?
Best Regards
Bog
Developers Field Notes | www.bog1.de

Hey, you can do it as follows
asnp *sh*
$site = get-spsite "site url"
$web = $site.openweb()
$web.AllProperties["NEW KEY"] = "NEW VALUE"
$web.update()
$web.dispose()
Your new custom property will be present in the web Property bag.
and you can access it by $web.AllProperties["New Key"] or simply $web.Properties["New Key"]
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

ASM disk mount and dismount !

Hello ,
I found this listing continues in my alert.log.I found when oracle archives it mounts the disk and the unmounts it.Is it Usual?
Thread 1 cannot allocate new log, sequence 161
Checkpoint not complete
Current log# 1 seq# 160 mem# 0: +ORCL_ONLINE_OPS1/dwh/redo01.log
Thread 1 advanced to log sequence 161
Current log# 2 seq# 161 mem# 0: +ORCL_ONLINE_OPS1/dwh/redo02.log
Wed Jan 9 17:22:13 2008
SUCCESS: diskgroup ORCL_ARCH was mounted
SUCCESS: diskgroup ORCL_ARCH was dismounted
SUCCESS: diskgroup ORCL_ARCH was mounted
SUCCESS: diskgroup ORCL_ARCH was dismounted
SUCCESS: diskgroup ORCL_ARCH was mounted
SUCCESS: diskgroup ORCL_ARCH was dismounted
Wed Jan 9 17:27:50 2008
Shutting down archive processes
Wed Jan 9 17:27:55 2008
Thansk,
Pam

please check metalink note
Note.361173.1 Asm Diskgroup success Mount And Umount messages in alert.log during Rman Backup
Thanks,
Anil

Commands to copy apps to local drive from networkshare and installing via unattend install

Hi Everyone,
I'm in the process of deploying and testing Windows 8.1 with different settings via unattended answer file. I would like to test out with another settings during unattended install but I'm having a hard time to implement it. Here is the scenario, I've a
server named WDS-DEP-SERV with a hard drive portioned into 2. One is C and other is E. On my E drive, I've a bunch of .exe apps saved. I would like my unattended answer file to pull those .exe apps over to the local drive from network share and install them
as the unattended install takes place. I'm looking for a command that can help me achieve it in a silent mode. During testing before, I was able to have my unattended file to pull VMware tools drivers from network share under RunSynchronousCommand parameter
with domain credentials of the network share and it installed successfully. For example, like this below.
\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s /v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log
I was searching online and came across a lot of things but none answered what I'm looking for. Can someone please reply back with the answers on how can I implement it in my unattended file.
1) To be able to have unattended file pulling drivers from network share, copy them over to local drive during unattended installation process and execute them silently. I need a command to pull this off.
2) What pass should I use in unattended file?
3) So far, I've used RunSynchronouscommand under Windows Deployement Neutral during "Specialize" pass to install just VMware tools. Is there a way to execute all apps in one go instead of doing it one at a time via Synchronouscommand? Please
correct me if I'm wrong, Is it true every time you use Synchronouscommands for various different apps or scripts to pull from network share, you'll have to use network credentials under each and every Synchronouscommands section. Like, if I add 4 SyncrhonousCommands
to the unattended file to pull 4 different apps or scripts from network share, I must provide network share credentials for each of those. Can it be just one time network share credentials under those and they all get pulled and executed during unattended
install?
Again, please if someone can get back to help me out. I would really appreciate it. Hope to hear from someone soon. Below is my unattended answer file in case someone would like to see it to understand better.
?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>WIN-8-DEPL</ComputerName>
            <ProductKey>MHF9N-XY6XB-WVXMC-BTDCT-MKKG7</ProductKey>
            <RegisteredOrganization>Microsoft</RegisteredOrganization>
            <RegisteredOwner>Microsoft</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
            <CopyProfile>true</CopyProfile>
            <BluetoothTaskbarIconEnabled>false</BluetoothTaskbarIconEnabled>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Order>1</Order>
                    <Path>net user administrator /active:no</Path>
                    <Description>Enabling Built in Administrator Account</Description>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Description>DisableNetworkLocationPrompt</Description>
                    <Order>2</Order>
                    <Path>REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\FirstNetwork" /v Category
/t REG_DWORD /d 00000000 /f</Path>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>REG ADD HKLM\System\CurrentControlSet\Services\Tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 0xFF /f</Path>
                    <Order>3</Order>
                    <Description>Diasbling IPV6</Description>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Credentials>
                        <Domain>Mikasa.local</Domain>
                        <Password>Ghtwhts2015</Password>
                        <Username>Administrator</Username>
                    </Credentials>
                    <Path>\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s /v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log</Path>
                    <Order>4</Order>
                    <Description>Vmware Tools Installation</Description>
                    <WillReboot>Always</WillReboot>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableAccelerators>true</DisableAccelerators>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <Home_Page>www.marca.com</Home_Page>
            <BlockPopups>yes</BlockPopups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <fDenyTSConnections>false</fDenyTSConnections>
        </component>
        <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <FirewallGroups>
                <FirewallGroup wcm:action="add" wcm:keyValue="Remote Desktop">
                    <Active>true</Active>
                    <Group>Remote Desktop</Group>
                    <Profile>all</Profile>
                </FirewallGroup>
            </FirewallGroups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserAuthentication>0</UserAuthentication>
            <SecurityLayer>1</SecurityLayer>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Interfaces>
                <Interface wcm:action="add">
                    <Identifier>00-50-56-30-85-87</Identifier>
                    <Ipv4Settings>
                        <DhcpEnabled>false</DhcpEnabled>
                        <Metric>10</Metric>
                        <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled>
                    </Ipv4Settings>
                    <UnicastIpAddresses>
                        <IpAddress wcm:action="add" wcm:keyValue="1">172.16.5.120/24</IpAddress>
                    </UnicastIpAddresses>
                    <Routes>
                        <Route wcm:action="add">
                            <Identifier>0</Identifier>
                            <Prefix>0.0.0.0/0</Prefix>
                            <Metric>10</Metric>
                            <NextHopAddress>172.16.5.1</NextHopAddress>
                        </Route>
                    </Routes>
                </Interface>
            </Interfaces>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <LogonCount>10</LogonCount>
                <Username>DarkKnight</Username>
                <Domain></Domain>
            </AutoLogon>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
                    <PlainText>false</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
                            <PlainText>false</PlainText>
                        </Password>
                        <Description>Admin User Account</Description>
                        <DisplayName>DarkKnight</DisplayName>
                        <Group>Administrators</Group>
                        <Name>DarkKnight</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOrganization>Mikasa</RegisteredOrganization>
            <RegisteredOwner>Mikasa</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
            <UILanguageFallback></UILanguageFallback>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Reseal>
                <Mode>Audit</Mode>
                <ForceShutdownNow>false</ForceShutdownNow>
            </Reseal>
        </component>
    </settings>
    <settings pass="generalize">
        <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipRearm>1</SkipRearm>
        </component>
    </settings>
    <settings pass="offlineServicing">
        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <EnableLUA>false</EnableLUA>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:e:/windows-os-images/win8.1x86ent-wimfiles/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Thanks
Omar

My script on my network share failed to run during unattend install right before the first login. Can someone take a look at my unattend xml file and suggest me a solution?
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ComputerName>WIN-8-DEPL</ComputerName>
<ProductKey>MHF9N-XY6XB-WVXMC-BTDCT-MKKG7</ProductKey>
<RegisteredOrganization>Microsoft</RegisteredOrganization>
<RegisteredOwner>Microsoft</RegisteredOwner>
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>eastern standard time</TimeZone>
<CopyProfile>true</CopyProfile>
<BluetoothTaskbarIconEnabled>false</BluetoothTaskbarIconEnabled>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Path>net user administrator /active:no</Path>
<Description>Enabling Built in Administrator Account</Description>
<WillReboot>Never</WillReboot>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>DisableNetworkLocationPrompt</Description>
<Order>2</Order>
<Path>REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\FirstNetwork" /v Category /t REG_DWORD /d 00000000 /f</Path>
<WillReboot>Never</WillReboot>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Path>REG ADD HKLM\System\CurrentControlSet\Services\Tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 0xFF /f</Path>
<Order>3</Order>
<Description>Diasbling IPV6</Description>
<WillReboot>Never</WillReboot>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Credentials>
<Domain>Mikasa.local</Domain>
<Password>Ghtwhts2015</Password>
<Username>Administrator</Username>
</Credentials>
<Path>\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s /v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log</Path>
<Order>4</Order>
<Description>Vmware Tools Installation</Description>
<WillReboot>Always</WillReboot>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableAccelerators>true</DisableAccelerators>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
<Home_Page>www.marca.com</Home_Page>
<BlockPopups>yes</BlockPopups>
</component>
<component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fDenyTSConnections>false</fDenyTSConnections>
</component>
<component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<FirewallGroups>
<FirewallGroup wcm:action="add" wcm:keyValue="Remote Desktop">
<Active>true</Active>
<Group>Remote Desktop</Group>
<Profile>all</Profile>
</FirewallGroup>
</FirewallGroups>
</component>
<component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserAuthentication>0</UserAuthentication>
<SecurityLayer>1</SecurityLayer>
</component>
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Password>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</Password>
<Enabled>true</Enabled>
<LogonCount>10</LogonCount>
<Username>DarkKnight</Username>
<Domain></Domain>
</AutoLogon>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Home</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
</OOBE>
<UserAccounts>
<AdministratorPassword>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Password>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</Password>
<Description>Admin User Account</Description>
<DisplayName>DarkKnight</DisplayName>
<Group>Administrators</Group>
<Name>DarkKnight</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<RegisteredOrganization>Mikasa</RegisteredOrganization>
<RegisteredOwner>Mikasa</RegisteredOwner>
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>eastern standard time</TimeZone>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cmd /C start /wait E:\RemoteInstall\Images\Windows8\install\$OEM$\$$\Setup\Scripts\SetupComplete.cmd</CommandLine>
<Description>Various Apps Installation</Description>
<Order>1</Order>
<RequiresUserInput>false</RequiresUserInput>
</SynchronousCommand>
</FirstLogonCommands>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
<UILanguageFallback></UILanguageFallback>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipRearm>1</SkipRearm>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<EnableLUA>false</EnableLUA>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:e:/windows-os-images/win8.1x86ent-wimfiles/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Can I download and install 11g release 2 for education purpose?

Dear all,
Can I install 11g release 2 for education purpose with minimum installation for free :)? If yes, can I still update the patches ?
Regards,
valerie
Edited by: Valerie Debonair on Jan 12, 2011 1:02 AM

>
Can I install 11g release 2 for education purpose with minimum installation for free :)? If yes, can I still update the patches ?Nobody seems to have mentioned the 11g2 XE Beta which is available for download.
The beta is unlikely to have any bugs that would affect a student type usage. The fact that
it's now in Beta would lead me to believe that the full release is not far away - after all,
it is the same codebase - they just take things out!
You can deploy, distribute and even sell your apps developed on XE.
Paul...
valerie

Calendar malfunction - calendar keeps freezing and displaying text I copied for another purpose - any advice?

My 6-month old macbook air's calendar keeps freezing up. when I open calendar, it displays across the top of the calendar some text I copied for another purpose and which I pasted into a word document yesterday. When this happens there's nothing I can do to escape it -- all commands result in the "thud" tone. So I keep having to force quit calendar.
Any advice?

Hi Dylan2412,
According to your description, you'd like to pass the ComboBox.Text to the second form's TextBox.
In Form1:
private void button1_Click(object sender, EventArgs e)
Form2 f2 = new Form2(this.comboBox1.Text); //pass the comboBox1.Text
f2.Show();
In Form2:
public Form2(string s) //get the string;
InitializeComponent();
this.textBox1.Text = s;
You could get the comBoBox refer to this sample above.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I would like to lock a particular block of apps and need a password just for that block of apps only. Is this possible?

I love to pass my iphone to the kids. My 20month old grandson can easily navigate from app to app and keep himself occupied.
However, there are certain apps I do not want him to open or accidentally delete.
How can I put a lock on only certain apps when I give him the phone.
I still want him to be able to go back and forth to other apps by himself.

No, not possible. But you can use Guided Access.
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Guided%20Access

How to mount and use swap partition _only_ for hibernation ?

By "hibernation" I mean suspend to disk.
My disk is a bit poor in RAM and the dirsk is slow, so I want to prevent any swap use of my system.
AND I want to use hibernation, in order to boot fatser... and not to loose my workspace state.
With a swap partition, hibernation works nicely.
But any intensive web browser easily lealds to incresed memory usage, hence swap use.
I have lowered the swap priority in /etc/fstab, down to 1 (and even tried 0).
Still, I am not satisfied : If would like not to use swap at all but for hibernation.
My plan was hence :
1) disable the automatic swap mount at boot
2) add a systemd unit to only moutn before hibernation
The first part was easy : I added a "noauto" option in /etc/fstab. Great, no more mounted swap. But, as expected, no more successful hibernation.
Then I tried to create a custom systemd unit.
- first copy the unit file automatically generated by systemd in /run/systemd/generator/dev-....swap to /etc/systemd/system/
- and add "Before=sleep.target" line in the Unit section
Result file here :
> cat /etc/systemd/system/dev-disk-by\x2duuid-blablablabla.swap
[Unit]
Description=Swap required for hibernation
Before=sleep.target
[Swap]
What=/dev/disk/by-uuid/blablablablabla
Priority=5
>
Next step show be to enable it, but I first run a safety check :
> systemctl show dev-disk-by\x2duuid-blablablabla.swap
Id=dev-disk-by\x2duuid-blablablabla.swap
Names=dev-disk-by\x2duuid-blablablabla.swap
Requires=-.mount
Wants=system.slice
BindsTo=dev-disk-by\x2duuid-blablablabla.device
RequiredBy=swap.target
WantedBy=dev-disk-by\x2duuid-blablablabla.device
Conflicts=umount.target
Before=sleep.target umount.target swap.target
After=systemd-journald.socket dev-disk-by\x2duuid-blablablabla.device system.slice -.mount
RequiresMountsFor=/dev/disk/by-uuid/blablablabla
Description=Swap required for hibernation
LoadState=loaded
ActiveState=inactive
SubState=dead
FragmentPath=/etc/systemd/system/dev-disk-by\x2duuid-blablablabla.swap
UnitFileState=static
InactiveExitTimestampMonotonic=0
ActiveEnterTimestampMonotonic=0
ActiveExitTimestampMonotonic=0
InactiveEnterTimestampMonotonic=0
CanStart=yes
CanStop=yes
CanReload=no
CanIsolate=no
StopWhenUnneeded=no
RefuseManualStart=no
RefuseManualStop=no
AllowIsolate=no
DefaultDependencies=yes
>
The problem here is that, somehow, a RequiredBy=swap.target line is apaprently automatically added, and makes exactly NOT what I want.
I've been battling a bit with systemd, but so far I have no clue how to do this correctly.
Important : I wand a clean "official" way, not to do a "service" unit that calls an home-brewed script taht calls swapon. I can do that, but systemd should be able to do it better than me, and without any trick.

Hello and thank you all
@fdservices & @WonderWoofy :
In fact, I forgot to mentionned swappiness, just tought about mentionneing the swap priority which act at a very different level is only revelevant when you ahve several swap files.
I have already modified that setting since quite a long time... and it indeed makes the system behaviour so much better.
Honestly, I could do with it... that's what I am doing since a few months in fact, and it really largely improved the user experience.
Still, the setting only makes swapping unlikely, but does not forbid it.
@WonderWoofy & @lucke :
You may be right, I could satisfy with swapiness...
Still, my feeling is that swap at run-time is mostly a remeniscence of the time where having several megabytes of RAM was juste a fantasm. At that time, at least for some intensive operations, simulating more RAM thansk to the cheaper & slower disk capacity was really decisive for a good user experience... and to allow some operations like some huge compilations. My feeling is that today, with our Gigabytes of RAM on our desktop/laptop, the need is much lower. In fact a swap is probably counter-productive for SSD for example (fast, yes, but swap is by nature something you write quite often, reducing teh SSD lifetime significantly). And simulating extra RAM is also counter-productive with applications such as web browsers which handle large amount of memory to handle cache themselves; it causes memory pressure, hence trigger swapping and machien slowdown instead of trigerring their pseudo-smart memory cleaning mechanisms. Last but not least, it does not encourage any improvement on application memory needs and rationalisation.
In fact, unless when I compile huge programs, or on really-limited-memory (embedded) systems, or eventually if swap can be hosted on significantly faster-than-storage disks, I feel that swapping does not really improve the user experience and system performance... and in contrary reduces them by having to handle swapping on and off memory & cache pages.
SO that's why I want to try. It's OK if I fail, swappinees fixes most my user experience issue, but I try to solve my more "theorical" issue as well.
And honestly, it is also to lean & play a bit with systemd as well.
More to come, I have things partially working now. Partially for now, and maybe perfectly with your help ?

I keep getting kicked off my apps, what can i do? and restarting doesnt help. just bought this mounth

also wont take of the notification of miss calls and messages.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Mounting and umounting via terminal

Hello,
I would like to mount manually my IPod after I did eject from the ITunes. Would be nice to do it with terminal, with some command instead of pull off USB plug and put in again. It seems that OSX can do two different things: umount and eject right? Bacause if I did umount in Disk Utility my IPod will be visible from disktool utility and I can mount it again typing mount disk1s2 for instance. But if I did eject (iTunes seems to do eject) I won't be able to mount it again because it is not visible in any command. What process is responsible to scan USB ports and mount automaticaly my IPod, can I use it again, some rescan command, how to do it?
Greetings from Poland,
Krzysztof M.

I don't know how to do it and nobody answered to it.

Is it possible to use airplay for image and sound via bluetooth speaker for sound?

I want to play my presentations using airplay, and it works perfectly, but i tried to use my bluetooth speakers at the same time and it doesn't seems possible! Each time i choose the bt speaker on system preferences it disconnects the airplay. Any suggestion?

Hello, you'd need another Router, or at least a different range of IPs on the Router for Wired & Wifi, or at the very least specifically mount Windows® shares by IP.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

Weblogic 10.3.3 and Forms servers. Environments for test and developments.

Hi. I could use a little advice here.
We have a server for development and test of Oracle Forms on Weblogic 10.3.3
I have installed default configuration with a ADMIN server, an WLS_FORMS managed server (and WLS_REPORTS) in same Domain.
I wants to have two new stand-alone managed forms-server in the domain: FORMS_DEVELOP:9010 and FORMS_TEST:9011, which use forms from different homes (it redhat linux).
How do I configer this? In the Enterprise manager there is only one entry for /forms. How do I configure more managed forms servers so they point to different locations in the filesystem (/home/develop/forms and /home/test/forms ). Is i possible in same domain ?
Kind regards
Henrik S.

Hi Again
Thanks. I am a newbee to this even though I have just been to the first classroom for weblogic...
But I need some more details to get through ...
Do I first have to create a domain template ? Or a extension template ? It is not clear to me what to select of the many components in that case.
Kind regards
Henrik S.

My mac is always hot and the batterry runs just for 2 o 3 hours

my mac is hot from nothing and the battery works for 2 hours. help, how can i fix this problem

Runaway applications can shorten battery runtime, affect performance, and increase heat and fan activity

App-v 5.0: howto mount and dismount via powershell (just for testing purposes)

Similar Messages

Maybe you are looking for