Append report text adds

My data is being saved with a block at the end of the data. It appears to becoming in with a star due to using Array to Spreadsheet String VI. Not sure what to do to get rid of the block. The complete VI that is giving me trouble is attached.
Attachments:
Sample delim string txt to excel columns.vi ‏49 KB

When I use indicators the data is shown with a * at the end after the array to spreadsheet string sub vi. I am assuming that is what is causing the error. I tried to attach a spreadsheet with some sample data, E has the data that was entered by this VI. The end of the data has the block that I am seeking to prevent from being written.
Thanks
Attachments:
Sample data with error.xls ‏51 KB

Similar Messages

Can text be formatted when using 'Append report text.vi'?

The example that ships with LabVIEW 7 'Generate Report from Template (Word).vi' uses 'Append report text' to insert text into a word template via bookmarks.
My question is can this text be formatted in any way (e.g. fontsize, fontcolor, ...)? It seems I can't format the bookmark and I can't format the transmitted text. It always appears in Normal Arial 12pt.
Thanks!

Thank you,
this works well for formatting the whole report. I also found that the Word Format Text.vi placed directly behind the Append Report Text.vi changes the attributes for the previously inserted text at the bookmark.

Append report text.vi

Hi all,
Is there a way to amend this vi so that it will centre text or perhaps invent a new one?
I would greatly appreciate it as i need to centre alot of text on the page i print and can find no easy way to do it
Its just a standard report not an excel or word
Thanks
Mike
Message Edited by MikeW1973 on 03-11-2008 12:08 PM

You can certainly open the Append Report Text vi and modify it as you please. You should rename it though. If you ever re-install the report generation toolkit, it would overwrite your changes if you didn't rename it. However, I don't know how you would go about centering the lines you want to append. Perhaps counting the number of characters in the line to determine the number of blank spaces needed to be inserted in order to center the line.
- tbob
Inventor of the WORM Global

Issue with printing report texts in Smartform

Hi ,
I developed a smartform and a print program. In the title of the smartform I need print a text depend on the company code. For this I prepared this text in the print program like the following.
case rbkp-bukrs.
when 'IT10'
smartform_struct-title = text-010.
endcase.
The problem is some times these texts are not printing on the form output. User are mad at this. when they complines me and I go and look at it, it is fine. I don't think this is printer issue. Any clues please let me know.
Thank you,
Surya

Hi Phani,
Thanks for your reply. In fact both me and user are doing the same. For user some times this text is not showing and some times it is. This is very strange.
I can do this by keeping it in text element. But for some texts we need to add some other text in between dynamically.
for example : for BE10 we need to show like,
CONCATENATE 'This text is prepared on behalf of (' <vendor name> ') ' some text' INTO w_title_text.
In this case: I have tried preparing this text in the program lines node. Here the problem is I can able to mention single quote in prepare the text. In the above example it is bold.
Basically I don't what's happening when printing report texts. But if there is a way to show single quote while prepare text that should be fine.
Thank you
Surya

Append a text line on blob data.

Hi All,
I need append a text line on blob data.
I haven't found prosper example or guide yet.
Following is example blob data which i should handle with.
Date: Thu, 29 Oct 2009 18:36:56 +0900 (KST)
From: IBM
To: IBM
Subject: JavaMail Attachment
Mime-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_10_1177830964.1256809016187"
------=_Part_10_1177830964.1256809016187
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Ideas
------=_Part_10_1177830964.1256809016187--
and I should add a new line on head of above blob data like this,
Message-ID: <1631215930.1256809016203.JavaMail.SYSTEM@ibm-demo>
so what i want is every blob data which doesn't have Message-ID line, update with random msg id.
please give me an tip or sample for this.
Thanks in advance,
Beomwoo.

I have to develop some program which correct abnormal email data of Oracle Collaboration Suite mail 10g.
OCS store the mail body into a blob column named as body on es_body table.
Normal mail body have to include Message id header information like following.
Message-ID: <[email protected]>
Date: Sat, 31 Oct 2009 19:48:04 +0900 (KST)
From: bbuser1 kim <[email protected]>
To: bbuser1 kim <[email protected]>
Subject: 111111111111111
Mime-Version: 1.0
Content-Type: text/plain;charset=US-ASCII
Content-Transfer-Encoding: 7bit
Accept-Language: en-US
X-Mailer: Oracle Collaboration Suite Web Access 10.1.2.4.3
When a message body doesn't have the message id line on first line.
I want add random message id on first line.
So, What i want exactly is how to update blob column data with adding a line like 'Message-ID: <[email protected]>'.
Any idea?
Thanks in advance,
Beomwoo.

Reporting Services Add-in for Sharepoint- does it need an SQL Server license?

In a new project we will be creating an SSRS in Sharepoint integrated mode. For this we'll need SQL Server and Sharepoint on that box.
We'll also have one or more SharePoint Web Front End (WFE) servers. To allow them to connect to the SSRS-in-sharepoint-mode box, and to present the user with the right user interface for doing so, I believe we can install the Reporting Services Add-In for
Sharepoint on the WFE servers.
The question is, do we need to have SQL Server license for each WFE server where we use the Reporting Services Add-In, or is it free to use?
We've had advice that we need to buy a SQL Server license everywhere we use the add-in, but I am not sure this is correct.
Thanks in advance,
Rich

Hello there,
The Reporting service Add-in for SharePoint can be downloaded free on Microsoft Download site. That means it does not need any license on the add-in.
Regards,
Edward
Edward Zhu
TechNet Community Support

Convert seconds to [h]:mm:ss format on report text box

I want to convert seconds to hh:mm:ss format on the report text box.
I use =Format(Sum([MyTime])/(24*60*60),"hh:nn:ss"), but it does not work if the hours more than 24 hours, since the format is for the time format for the day.
I need the result shows more than 24 hours, because I want to show how many hours and minutes from my seconds value.
I can use [h]:mm:ss for Excel that it gives me the total hours more than 24 hours.
I tried to use the following to my text box
Int((sum(MyTime)) / 3600) & Format(Int((sum(MyTime) / 60) Mod 60, "\:00") & Format(sum(MyTime) Mod 60, "\:00"),
but for some reason it only shows seconds part without minute and hour part of the value.
Your help and information is great appreciated,
Regards,
Souris,

I want to convert seconds to hh:mm:ss format on the report text box.
I use =Format(Sum([MyTime])/(24*60*60),"hh:nn:ss"), but it does not work if the hours more than 24 hours, since the format is for the time format for the day.
I need the result shows more than 24 hours, because I want to show how many hours and minutes from my seconds value.
Hi sourises,
You can use the next function. Place it in a general module.
Function Sec_to_str(seconds)
Dim uur As Integer
Dim min As Integer
Dim sec As Integer
Dim cur_sec As Variant
cur_sec = seconds
If (IsNull(cur_sec)) Then
Sec_to_str = Null
Else
sec = cur_sec Mod 60
cur_sec = cur_sec \ 60
min = cur_sec Mod 60
cur_sec = cur_sec \ 60
uur = cur_sec
If (uur = 0) Then
Sec_to_str = Format(min, "#0") & ":" & Format(sec, "00")
Else
Sec_to_str = Format(uur, "#0") & ":" & Format(min, "00") & ":" & Format(sec, "00")
End If
End If
End Function
Imb.

Logfile Generation utilizing "Excel" (Creating and Appending Report)

All,
As always, thanks for the help you have given me in the past....especially the Vets. I have tried to figure out a solution to my issue from the message board, but no solution seems to fit what I am doing.
Here is my situation...... I am using Labview to test my product one unit at a time. I have always used Teststand and report generation from there, but this time it is strictly Labview. This is my first attempt to create a logfile with Excel that appends one xls file everytime one unit is tested.
The way my test is set up now, I test and collect the data in an array for when I created the logfile generation VI. I took several stabs at it, looked at examples, but cant figure out the direction I need to go to create this. Here is the parameteres necessary for the logfile (spreadsheet).
-All UUT's will go into one spreadsheet and the spreadsheet will be appended by adding new data in next available row.
-Data is imported to spreadsheet in array format.
-Test data that passes will be green, test data that fails will be red (I can figure this out, but this is why I need to use Excel)
-I want to use Excel so I have more flexibility for graphs and things of that nature in the future.
It seems rather simple, but not for me.....lol. If I go to the Report Generation Toolkit, i see "Create Report" and "Append Report"....but Append Report still wants the "report input" node wired. What do I wire that to? For example, if I have an excel spreadsheet called hangover.xls, do I somehow wire hangover.xls to the input? I am having trouble finding answers. I would really appreciate a simple JPG or VI so I can understand the setup for what I want to do.
Comments and links to threads/help appreciated!
Ryan

Hi Evan,
Thanks for the other examples....I thought I was going to be able to manipulate them into what I want, but ended up spending about 6 hours playing with it and up to 2am. I am getting so frustrated with this. This is new ground for me, I never have experimented with logfile creation. I am sorry to keep bothering you with this but I am ready to pull my hair out. I attached a couple Vi's....Spreadsheet import is the main VI and report.vi is the sub.....i need to rename them better but haven't got there.
First off, that VI you posted that I couldn't open, could you just take a JPG of the block diagram? That would really help.
I need to create a spreadsheet with logfile data in rows. The spreadsheet is to be appended for each unit under test. Each unit under test gets one row and all data is written at the end of the test. If you look at the spreadsheet_import.vi, I am basically taking a bunch of 1D arrays of data to create one long 1D array for one row.
Every month a new spreadsheet is created (so log file data is divided into months) , and that is what the report.vi does....it looks to see if the filename is already created and if not, sends a boolean to the write to spreadsheet file to append. I reverted to "write to spreadsheet" because for the life of me, I cannot figure out how to use the worksheet portion to do this. I would think this should be pretty simple, but I cannot figure out and its not for lack of trying.
If I use "write to spreadsheet", I am going to run into problems because I ultimately want to use a excel template with formulas but if I can figure it out, this will have to do.
All I really want to do is to create a spreadsheet if one doesnt exist or append if it does, combine all my 1d array data, and create one row with this data. The other issue I ran into before is I cant figure out how to tell Excel where the next row is.......UUGHHHH! This is definitely stressing me out as I have a deadline and I will gladly sent a case of beer to Norway for the help received.
Dying Here,
Ryan
Attachments:
Spreadsheet_import.vi ‏14 KB
report.vi ‏33 KB

Print Preview of crystal Report without add a document

Dear All,
Can i see the Print Preview of Crystal Report without add a document like PLD.
i have developed a Crystal Report through Add Command by Passing a query.
if anybody have idea on this issue please suggest me.
Thanks.
Shekhawat

Hi Shekhawat....
Through Query Crystal report it is not possible to view the Layout as Draft withou adding teh docs because Report fetch the details only when itys value goes to Database Table......
So suggest to use SAP standard CR and modify as you want....
Regards,
Rahul

SQL Server Reporting Services Add-In for SharePoint not installing properly

Environment: Windows Server 2008R2, SQL Server 2012, SharePoint 2013 Enterprise
When I run the install for SQL Server 2012 Reporting Services Add-in for SharePoint it SHOULD install to c:\program files\common files\Microsoft Shared\Web Server Extensions\14 AND 15. Specifically it should drop a mess of ASPx pages for admin to the \templates\Admin\ReportServer
folder. In this environment it only pushes them to the 14 folder and not the 15. Any ideas on why this would happen? I have not ever seen this before and it is hosing the install completely.

Hi Gouranga,
According to your description, when you install the SQL Server 2012 Reporting Services Add-in for SharePoint 2013, you find the files are installed into the folder for sharepoint 2010(..../14). Right?
In Reporting Services, Not all features are supported in all combinations of report server, Reporting Services add-in for SharePoint, and SharePoint Products. Please see the linke below:
Supported Combinations of SharePoint and Reporting Services Server and Add-in (SQL Server 2012)
As you can see in the link, the SQL Server 2012 Reporting Services Add-in is only for Sharepoint 2010. This the reason why it's installed into the file for sharepoint 2010.
Reference:
Where to find the Reporting Services add-in for SharePoint Products (SharePoint 2010 and SharePoint 2013)
Install or Uninstall the Reporting Services Add-in for SharePoint
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SQL Server Reporting Services Add-In disappered but SSRS Service Application is there

Good Day,
I am using SQL Server 2012 SP1, and SharePoint 2013 SP1.
In the SharePoint Central Admin, Reporting Services Add-In is missing but in the "Manage Service Application" page, SQL Server Reporting Services Application is appearing and I have created SQL Server Reporting Services Application. And, in
the "Services on Server page", the "SQL Server Reporting Services Service" is started.
I would like to configure SSRS on SharePoint Central Admin for my SSRS reports.
Please help me, how to get Reporting Services Add-in the SharePoint Central Admin.
Thanks in advance

Hope you have followed all steps below:
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://technet.microsoft.com/en-us/library/ms144289.aspx
http://technet.microsoft.com/en-us/library/gg492278.aspx

Sharepoint SQL Reporting Services Add-In

Hi,
I have installed the Sharepoint SQL reporting services Add-in in one of my application servers and when I call the sites created from the application server itself they show the add-in feature in them in the "site features "list. But when I call
the same site from a WFE in the farm with no add-in installed the the site doesn't show the add-in feature in the "site Feature" list.
This is not supposed to happen as I have tried the same in another farm and the add-in was needed to be installed only in the application server and it would automatically be shown in sites even when they are called from a WFE or anywhere.

SSRS in SharePoint Integrated mode requires the installation of two components. SSRS in SharePoint Integrated mode only needs to be installed on one App server. But the SSRS SharePoint Add-in needs to be installed on all the WFEs and the app
server where SSRS in SharePoint Integrated mode is installed. Not sure how you got it to work in the other farm. Take a look at the following article:
https://msdn.microsoft.com/en-us/library/hh479775.aspx
You will note in the diagram that the Add-in is installed on each WFE.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Reporting Services Add-In for SharePoint Products

Hi,
Can I use the SSRS Web part installed by the add-in to see local mode reports just by instaling the add-in or do I also need to install the "Reporting Services - Sharepoint" on SS Shared Features setup wizard?
Thanks,
DD

Hi,
Per the MSDN article: To use the Web Part, you must have installed and configured the Reporting Services Add-in and configured the report server for SharePoint integration.
You must also have reports to display in the viewer. You can only open reports that are in a library, a library folder, report history, or a link from a Library Web Part to a Report Viewer Web Part.
You cannot open reports that are saved as an attachment to an item in a custom list.
More reference:
http://msdn.microsoft.com/en-IN/library/ms159772.aspx
As this issue is related to reporting service, if you have more issues about reporting service, I recommend you post your issue to the forum for Reporting Service.
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to this topic.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Missing shared feature Reporting Services Sharepoint and Reporting Services Add-in for Sharepoint products

Hi, when I try to install SQL Server 2012 SP1 (ISO from Microsoft Download website) on a Windows Server 2012 and try to select the shared feature options:
- Reporting Services Sharepoint
- Reporting Services Add-in for Sharepoint products
They are both missing from the list.
How do I solve this? Help!

Hello,
Did you download the SQL Server 2012 Express with Advanced Services edition from the Microsoft website? If so, this edition did not support SharePoint Integration mode.
Just as Alberto post above, Business intelligence features are not all available in all editions of SQL Server 2012. You can refer to the following link about support features in Editions of SQL Server 2012:
Reference:http://technet.microsoft.com/library/cc645993(SQL.110).aspx#Reporting
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

SharePoint 2010 and Reporting Services add-in - multiple versions supported?

Hello,
I would like to try out Reporting Services with SharePoint 2010. I already have the Reporting Services add-in installed on the WFE for SQL Server 2008 R2, but not configured.
At this point I thinking it's best to move forward with SQL Server 2012.
Can both the 2008 R2 version and 2012 version of the Reporting Services add-in exist on the same WFE in separate instances? Or do I need to uninstall the 2008 R2 version first?
Thank you in advance,

Just upgrade to the 2012 version, you don't have to uninstall first.
Also, see the supported combinations of SSRS version and Addin version:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Use the highest version of the addin possible, as newer addins have offered performance improvements.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Append report text adds

Similar Messages

Maybe you are looking for