AppleTV stops after about 10 minutes and I get the "spinning circle". I have re-set the computer's power setting to NEVER shut down, but no help.

My Apple TV stops playing after about 10 minutes. It will only work when iTunes is open, so I leave iTunes and and Home Sharing is on. Everything is fine for about 10+ minutes, then the music stops and I get the "spinning circle". I've set the computer's power settings to never shut down, thinking that it was stopping because the power went off, but it still stops. People over for T-giving soon. HELP!!

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

Similar Messages

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

Hi RWD2,
Welcome to the Support Communities!
To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

Songs stop after a minute of play

I just downloaded an album on iTunes and some of the songs stop after a minute and move on to the next song. I'm having a real tough time finding an answer to this one. Does anyone know of a fix for this? Maybe a re-download?
Cheers!

Solved it! Thanks.

When I play songs on my itunes account, they stop after about one minute and itunes goes to the next one. how do I fix this? These are songs in entire albums that I have purchased.

when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song. This is happening with songs on albums I have purchased direclty through itunes

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Imovie 10 wont let me share my videos over 3-4 minutes , youtube is ok but when i try a video of about 90 minutes i hit share and after about 10 mins i get the message box "video rendering error: -50 share failed please help!

I uploaded the new Imovie 10 and cannot share videos,after about 10 mins I get the message "Share failed Video rendering error :-50", please help!

I am getting the same problem. Downloaded Maverick and the new iMovie 10.0.1 and It will only upload 10 minutes of a 65 minute video then I get the rendering error 50 each time tried to export to desktop, to thumbdrive, to youtube. No luck. any suggestions Apple?

I have 10.8.3 installed. I use Cisco VPN but this hangs after 57 minutes and 35 seconds. I disconnect but can't reconnect straight away but have to wait about 10 minutes then have another 57 minutes

I use a mac with 10.8.3 installed. I use Cisco VPN & citrix receiver to connect to work via my home wireless which connects & works brilliantly but then hangs after 57 minutes and about 35 seconds. I disconnect but can't reconnect straight away although it goes through the motions but doesn't find a connection. I have to wait about 10 minutes (or restart the MAC) then it connects fine again and I have another 57 minutes. I previously used 10.6 for a while without any problems and then the VPN just stopped connecting? after trying to resolve without success I upgraded the OS hoping that this might fix the issue which it has but created this other problem! I can live with it but thought there may be some way to correct this surely. I'm not heavily technically minded and have read reports about the racoon service may be causing this but not sure how you do this very simply step by step
Thank you for any ideas you can give

I use a mac with 10.8.3 installed. I use Cisco VPN & citrix receiver to connect to work via my home wireless which connects & works brilliantly but then hangs after 57 minutes and about 35 seconds. I disconnect but can't reconnect straight away although it goes through the motions but doesn't find a connection. I have to wait about 10 minutes (or restart the MAC) then it connects fine again and I have another 57 minutes. I previously used 10.6 for a while without any problems and then the VPN just stopped connecting? after trying to resolve without success I upgraded the OS hoping that this might fix the issue which it has but created this other problem! I can live with it but thought there may be some way to correct this surely. I'm not heavily technically minded and have read reports about the racoon service may be causing this but not sure how you do this very simply step by step
Thank you for any ideas you can give

Audio streaming stops after about 13 minutes.

Audio streaming over the Internet just stops after about 13 minutes and has to be restarted. I need a solution

Thanks for your help! You helped solve the issue, albeit indirectly...
At this point, I want to share my experience, in the hope that it might be helpful to others:
After finding that chapter markers had nothing to do with the problem, I found that indeed my camcorder was set to the dreaded 12 bit. Oh dear! The original DV tape is long gone. (At first I did not expect this to be a problem, since I had made several DVDs successfully with the existing settings, but then there are all these horror stories in discussions about what 12 bit can do to you.)
So to rescue my movie, I found advice to "share" my iMovie back to a fresh DV tape, and then re-import it with the 16 bit setting.
This lead to the next issue: After a number of minutes of re-exporting to DV tape, the video received by the camcorder would freeze, while the audio continued. This happened at several different points in several differerent attempts.
So next I visited iMovie discussions, where I found advice to clean up my Mac. I used Mac Sweeper, and now indeed my Mac runs faster and smoother for many apps. I also downgraded my QuickTime version. But another attempt of exporting from iMovie to DV tape also failed, but now it failed at exactly the same point where the audio stopped in my DVD!!! (Even though on the export-to-DV-tape it was not the audio but the video that froze.)
Next I found that when playing that problematic scene in iMovie, the iMovie program would also freeze at that very point, making it necessary to "force quit" out.
In the end the solution was to chop out the problematic bit in that scene. Now everything works fine, including the iDVD step.

TS3700 After synched with PC, verified song played perfectly at PC. Once played IPOD NANO by itself, song stopped after about one minute. Happens to every song. Why?

After synched with PC with all songs transferred via iTunes, I verified all songs played perfectly at the PC. Once played IPOD NANO (6th generation) by itself, the song stopped after about one minute. This happens to every song. Why? I checked the IPOD NANO setting, but do not see anything need to be changed.

After synched with PC with all songs transferred via iTunes, I verified all songs played perfectly at the PC. Once played IPOD NANO (6th generation) by itself, the song stopped after about one minute. This happens to every song. Why? I checked the IPOD NANO setting, but do not see anything need to be changed.

Problem when exporting movie, video stops after 2 minutes

I set up a Project containing both images and videos. They were all shot using a digital camera (Canon SD400).
When I export the 5 minute movie, around 2 minutes the video freezes, but the music (from an mp3 file) keeps playing. At 2 minutes one of the videos start to play and the video has a little yellow button showing on it in the timeline. None of the other videos have this little yellow button, although I am not convinced that this is the one causing the problem. Here is an image of it:
http://dombovari.com/stuff/imovie.png
Any ideas why the video playback would stop when I export it? It plays fine in iMovie when I preview the project, but when exporting, the video playback stops.
Thanks!

I have this very same problem. All 640x480 clips shot with a Canon SD550. iMovie 5 will play back everything fine in iMovie, but once I export the file using H.264 or MPEG-4, the video stops after about 30 seconds (of the 3 and half minutes of the video). The music still plays, but the video has not exported properly (and it shows in the file size).
What WILL work is if you export it to web, but I can't use that. I need it exported at its full quality. (Also will not work, by the way.) But, again, it plays in iMovie just fine. I even tried exporting from the timeline file (with the reference media files) in the iMovie file package—but I get the exact same results.
Quite frustrating considering it works in iMovie just fine. Any other ideas, folks?
System/Software: MacBook Pro 2.0GHz, 1 GB, 256 X1600. Latest Tiger, latest QuickTime, latest iMovie HD.

IMacG4: DVD shows on desktop, but installation stops after a minute

With my iMac G4 (1.2 ghz + 1 gig dram), the Leopard DVD shows on the desktop. Go thru the install process, selecting "Erase and Install" on an external drive ... stops after about a minute or two with "Cannot install on this disk .. cannot validate(???) some files".
I've poured over this Discussion Board and have seen several other identical instances. I also have a DVD with no mfg or date stamp on either its inner or outer rings; further, the Apple logo is completely transparent.
I called Apple Tech Support, got bumped up to Level 2 Tech Support where I was told that I have not scientifically demonstrated that it is not my third-party (LaCie) firewire drive. That is mathematically true; however, with the volume of similar issues reported on this Forum, I reject this hypothesis as reasonable.
To continue, I called Sales and found a very nice gentleman with whom I shared every detail of my history, including the comments by Level 2 Tech Support. The sales person agreed to send me a replacement Leopard disk which I am expecting later today. Further, I intend to return my existing Leopard disk via snail mail.

To continue ...
I have also scoured macfixit.com and noted their detailed procedures to first clone the Leopard disk to one partition of an external drive, select this partition as the start-up drive, anf finally reboot the Mac and follow the instructions on "Erase and Install" on another partition or another external drive.
If the second Leopard disk fails, then I intend to meticulously follow the above cloning procedure.
Just one more thing, and this goes back to my frustrating experience in installing the then-brand new iWork 08. I proved beyond any scientific doubt that this installer demanded that there be no remnants of previous versions of iPages or Keynote anywhere. So I trashed these remnants and the subsequent installation was successful.
I am curious if this unreasonable requirement pertains to any of the individual installs that are part of the overall Leopard installation procedure??

BT Sport HD: sound stops after a minute or so

Hi
Firstly I was impressed with the launch show last night - well done BT!
I have a YouView box and Infinity BB. I tried to watch BT Sport 1 on HD (channel 510), but after a minute the sound stopped. I could change channels and then come back to 510 and the sound would be there, but again would stop after a minute or so. This happened on all the Sport HD channels.
Note that the SD Sport channels (507 - 509) were absolutely fine.
I tried re-booting the box, but it didn't solve the issue.
Has anyone else had this problem?
Thanks
Simon

This is a me too message. I suspect it is a Dolby digital problem. The picture has been rock solid so far. I'm using Youview.
I have a followup and a workaround to this problem
I contacted BT and they are convinced that the problem is due to the powerline adaptor, which was supplied by BT along with the Youview box. They tell me that their technical help files state there is not enough bandwith available. They are going to send me, free of charge, a 10 metre ethernet cable for a direct connection to the router. I was very sceptical when I was told this over the phone and my subsequent action below confirms my scepticism.
After the call, I tried the following setting change on the Youview box. I went to settings>tv signal & quality>HDMI Audio format and changed this from surround to stereo. This effectively turns off the dolby digital output. The problem disappears! Of course, this turns off dolby output for all HD channels on the box which is not desirable.
This makes me convinced it is a dolby audio problem but getting BT to recognise this might be more difficult. I hope they can fix the problem soon.

When i'm in email, after about 10 seconds, i get a black screen.....10 seconds later, it returns me to the general screen....anyone have this before??? thx

when i'm in email, after about 10 seconds, i get a black screen.....10 seconds later, it returns me to the general screen....anyone have this before??? thx

I don't know if you've got this solved or not but I started getting this too about a month ago. I just had it happen again about 10 minutes ago. I was on a website & BAM black screen, I don't hear the usual "winding down" of the hard drive though, so the HD sounds as though it's still working properly AND there's a weird hue around the edges of the screen so it's not pitch black as though the monitor turned off. Once I force shut down then I get the true pitch black screen before it turns back on again.
Also, every time this happens & I re-start the hard drive tends to be working very hard doing something in the background for at least 2-5 minutes not sure why?

Satellite P10-554 shuts down after few minutes and I can not reboot

hello,
i hope anybody can help me with my satellite P10-554
when i start the notebook everything works fine a few minutes. than the monitor turns into black and the notebooks shuts down suddenly. i cannot reboot it, when i push the start-button nothing happens.
i have to wait for about an hour and then i can start it up again, but he works just a minute and shuts down again !
help me please, cause i need my notebook to work !

I did that many times. First you need a special torx-screwdriver. Then you can remove the cover over the fans. Than take your vacuum-cleaner and remove the dust. Take a brush or somethin else to remove the dust from the fans. Then, you need to remove I think 2 big screws, now you should hold the cooling falance in your hands, the one with the fans. Clean that properly.
After that you can remove the copper-cooler, with 2 more screws I think, but it is pretty obviously. Now you should see the blank cpu with lots of heat-paste on it. I dont know why they put so much of this stuff on it from toshiba. So get a better one like Arctic-Silver or sth. My advice is to take the CPU off (one screw on top as far as I remember) and clean the surface.
The copper you can clean under water, but dont use sth that could scratch the surface. After that let it dry good. Now just put the CPU back and fix it with the screw again. Take a !litte! heat paste and put it properly with a paper all over the surface of the CPU, but remember, just a little! Then follow all steps back, dont forget to clean the graphics-chip as well and put some paste on it. You can see which it is when you look under the fan-cooling-falance, there should be a rest of heat-paste. Everything back to its place and voil*, a nice, cool clean notebook. By the way, I replaced even the fans.
If you need further advice, just ask!

Screensaver stops after 2 minutes in 6110 Navigato...

Hi,
I've got a 6110 Navigator 3rd edition symbian and the screensaver stops after 2 minutes, the screen wents totaly black.
I want to have the sreensaver always on and running in order to see the clock and informations about missed calls and sms.
Is there anyone who knows the solution for this issue?
Thank you in advance.
Best regards,
Nuno Batista
Nuno Batista

I believe it's designed this way to save battery power. keeping it on all the time will drain the battery life horribly.
What I do is not to use the screen saver at all and set the phone to "lock keypad" on closing sliding it close. Then when I need to check the time, just press the dial key (green) and the time will display for a short time before fade away.
Hope it helps.
/alan

Disp+Work.exe stop after 1 minute

Hi Experts,
                  I am doing the DR setup for production server. Created standby database successfully. Then I shutdown primary database and activate the secodry database to primary database adn chage the profile configration and start the SAP instance, Desp+work.exe down after 1 minute and ABAP WP table is giving error.
Attached the erroe below
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        MVQ
systemid   561 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        5520
Mon Feb 21 14:14:56 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5520) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 14:15:01 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00                         <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00                         <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 14:15:41 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 14:15:51 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 14:16:09 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1472 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1472 (pos=2)
SiSelNRemove: removed sock 1472
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1472
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5520) [dpxxdisp.c   10484]
Good Bye .....
Please help me to solve this issue
Thanks in Advance
Jose H.

Hi Dinter,
Please find the log below..
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        MVQ
systemid   561 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2080
Mon Feb 21 15:28:59 2011
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2080) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 21 15:29:05 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >DRSERVER_MVQ_00                         <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000019050050, size: 6604928)
DpShMCreate: allocated sys_adm at 0000000019050050
DpShMCreate: allocated wp_adm at 0000000019052150
DpShMCreate: allocated tm_adm_list at 0000000019057360
DpShMCreate: allocated tm_adm at 00000000190573C0
DpShMCreate: allocated wp_ca_adm at 00000000195FABF0
DpShMCreate: allocated appc_ca_adm at 00000000196009B0
DpShMCreate: allocated comm_adm at 00000000196028F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000019689580
DpShMCreate: allocated gw_adm at 0000000019689600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000019689630
DpShMCreate: allocated wall_adm at 0000000019689640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Mon Feb 21 15:29:06 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( DRSERVER) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >DRSERVER_MVQ_00                         <)
DpStartStopMsg: start msg sent
Mon Feb 21 15:29:07 2011
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Mon Feb 21 15:29:46 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 21 15:29:56 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Mon Feb 21 09:59:56 2011
========================
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Feb 21 15:30:14 2011
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1476 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1476 (pos=2)
SiSelNRemove: removed sock 1476
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1476
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
Mon Feb 21 15:30:15 2011
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2080) [dpxxdisp.c   10484]
Good Bye .....
Regards
Jose H.

AppleTV stops after about 10 minutes and I get the "spinning circle". I have re-set the computer's power setting to NEVER shut down, but no help.

Similar Messages

Maybe you are looking for