Application crashes with UAC enabled (Need help bad)
I have an application that installs a service configured to run with the Local System account.
The application never prompts me for UAC but it crashes if the following is true
1. UAC is enabled
2. Service is configured to run using local system account
Workarounds:
Disabled UAC (not an option for me) or change the service to run using a service account (possible)
Beside setting up a service account does anybody know how I can get around my issue with UAC?
Thanks!!
Please be courteous enough to provide the exact name and version of the application causing this. It is absolutely impossible to suggest possible actions without the name and version of the application.
Have you contacted the publisher/vendor of the application about this? The publisher/vendor has sole responsibility for support of their products and to ensure they run properly in the Windows 7 environment.
Some applications require that the installation setup program be run As Administrator, but this is information you would have to acquire from the publisher/vendor of the application.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Similar Messages
-
CS6 photoshop constantly crashing with OpenGL. Need help
OpenGL seems to crash randomly, but constantly. Previously running CS3, with few issues. I recently upgrade the graphics card after OpenGL testing failed, and it seem to be the most likely solution based on the old card.
Working file is located on C drive, with back to external.
I am currently running the following ridge
Oper.: Win 7 Pro 64-bit, Service pack 1
Board: Asus P8Z77-V Pro (Intel Z77 Chipset)
Processor: Intel i5 3570K, 3.4 Ghz, 6mb Cache (Socket LGA1155)
RAM: 2 x 8Gb DDR3 PC3-10666 1333Mhz
Graphic: EVGA GeForce GTX 770 - 04GP4-3776-KR (New, as of 6/27 to upgrade old card)
Storage: Hitachi 1Tb - internal
WD 2TbDetails system info:
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3410 MHz
Built-in memory: 16331 MB
Free memory: 9935 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 95 %
Image tile size: 1024K
Image cache levels: 5
Photoshop crashed on 6/29/2014 at 9:12:42 AM (AllocateSharedGLResources)
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 770/PCIe/SSE2
Display: 2
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Display: 1
Display Bounds:= top: 0, left: 1920, bottom: 1080, right: 3840
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 770
OpenCL Unavailable
Driver Version: 9.18.13.3788
Driver Date: 20140519000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum.dll,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 770
Video Card Memory: 4095 MB
Video Rect Texture Size: 16384
Serial number:
Application folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\MIKEDD~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.4G, 604.6G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 8.5
Camera Raw Filter 8.5
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Clouds 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Collada 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Measurement Core 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Picture Package Filter 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
Microsoft Word crashes with snow leopard. need help! this is aweful
I installed snow leopard and since then every time i open a word document on my Microsoft word (mac 2008), it crashes and does not open. i can open word and start typing a new doc, save it and then open that one and it works. but if i try to open a document that i created before snow leopard (regular leopard), it crashes right away. please help because i am a college student and i need to access my docs!!!
Hi all--this worked for me:
1. Uninstall Office using the Remove Office program.
2. Remove (trash) the microsoft folder from the fonts folder. Then delete the word plist from your user library preferences folder.
3. Run disk utility to repair permissions and restart.
4. Run Snow Leopard cache cleaner and do a deep clean on the cache of your system.
5. Run Easy Find to find "fontcachetool" (it's an invisiable file, so make sure you enable easyfind to locate invisible files. Trash the fontcachetool file once it's located. Note: I actually had two of these files, and I trashed them both.
6. Restart.
7. Run disk utility to repair permissions again, and restart.
8. Install Office 2008.
9. Do NOT open any Office programs, and restart.
10. Install SP 1 (note: I installed this from a disk image. My previous attempts to use the automatic check for updates "feature" in Office to download and install the program did not work--believe me, I uninstalled and reinstalled Office three times before performing the tasks I am listing here. You can download the disk images of the SP here:
SP 1 (12.1.0): http://www.microsoft.com/downloads/details.aspx?familyid=395D1487-A3A6-4106-A0F8 -4D6E1D6D89D2&displaylang=en
SP 2 (12.2.0): http://support.microsoft.com/kb/973254
Update 3 (12.2.1): http://www.microsoft.com/mac/downloads.mspx?pid=Mactopia_Office2008&fid=9730452B -E6AD-4330-93E4-57F66293BF1C#viewer
11. Restart
12. Install 12.2.0. Restart.
13. Install 12.2.1. Restart
14. Repair permissions.
15. Restart.
So far so good. I hope this helps.
Antonio -
Issues with N80. Need help badly!!
I got my N80 as a gift a week ago. It was purchased in dubai ( which is in the middle east). 2 days ago i transferred some files from my phone to the computer and ever since the next morning my phones been acting weird. applications close, its slow, battery life is really bad (like 5 hours), my signal bar and batter life bar disappear for a while and the phone powers off by itself. Today I removed the memory card and tried the phone and it seems to be working fine now and I am not having any issues. I am assuming and hoping that the card got affected when i was uploading the files from my phone and that there is no problem with the phone. I have been advised to send the phone back to the middle east to get it checked and possibly repaired. this is something I dont want to do at the moment because i like the phone and it will be a long time before i get it back. My question is if anyone else has had a similar problem, is it the memory card that is faulty and should I just get a new card or should I actually send the phone back to get it checked totally, in case its the phone that is faulty? also I have read that a new firmware is out. Can i get that off the net or it has to be uploaded at a local service centre ( which unfortunately is in the middle east again and not in Canada where I am at the moment)? The firmware on my phone is V 3.0617.0.6 and was updated on 03-05-06 RM-92 Nokia N80 (08). Is this firmware ok for now as I will be going to the middle east in december and can get it done then. Or should i just send the phone now and get the firmware updated and also get the memory card problem sorted out?
07-Sep-2006
07:07 AM
manta wrote:
I have not experienced similar behaviour, but if you connected phone via cable to a PC and used the data transfer mode to move the files to PC, that equals to mass storage mode that shows the memory card as expernal memory in Windows Explorer and it is important to remove the phone then safely using the remove harware option in Windows, di dyou do that ?
If not, the memory card can get corrupted and corrupted memory card can mak the phone behave badly.
I would just go and buy a new memory card and then when connecting to PC always use the safe removal before disconnecing the phone.
Or install PC Suite, the´connection method is different and no safe removal needed.
I did use PC suite while transferring the files which makes it even more weirder. But yes i did not do that safely remove hardware thing. I thought that it wouldnt be needed since im using PC suite. do u have any idea about the firmware? should i get it updated now back in dubai or wait till i go back myself in december? -
ITunes crashed with backing up/need help restoring
In the middle of doing a first-time back-up, my iTunes crashed. When I restarted it, all my music was gone. (My library page is black.)
iTunes estimated I'd need 6 disks to back-up my library. I was on disk 4 when the problem occurred.
What should I do to restore my library? Will resoring with Disks 1-3 allow iTunes to recognize my iPod so that I can restore the music that would have been on disks 4-6?
Thanks.1. Unless you've told iTunes not to copy music you've added to the iTunes library, backing this folder up will back up your entire iTunes library. If applicable, deauthorize the machine before restoring the computer.
2. This will work with music purchased from the iTunes store, when the computer is authorized to play music purchased from the iTunes store account used to purchase that music. It will not work with music you've gotten from CDs or other sources.
3. Yes.
(16907) -
Old Man With New Technology Needs Help Badly
I have purchased QTPro7 & have successfully installed it. Now where do I start. I want to rip my own personal collection of DVDs & put them on my Video iPod. I don't know where to begin or how to operate QTPro7. Please help.
Texan to Texan:
QuickTime (and Pro) do not open or play DVD formats without third party software help.
Search the iPod Discussions pages for some software ideas. -
I need help badly with my ibook and palm pilot
Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...
I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
-NA -
Need help badly!! how can i use the front camera i...
guys, i need help with the front camera of my device
how can i enable the front camera of nokia N900 to shoot photos or videos,
this problem is really bugging me...
need help badly...You can't.. it is terrible..
the only app that really uses it is mirror
Open this link on your phone to install mirror
http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!) -
Applications crashing with dyld error messages: CFURLStorageSessionGetDefault
All was working fine (been told to hold off on updates so have not installed them, yet I am running 10.6.8 [10K549]). Suddenly after a reboot applications crash with the same error:
Dyld Error Message:
Symbol not found: __CFURLStorageSessionGetDefault
Referenced from: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
Expected in: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
Can not open Terminal. Can not open Skype (removed 2.x version, downloaded latest 5.3.59 and installed), can not run Evolution (starts, but when clicking a message same error). Attempted to install 10.6.8 bundled update (manual download), but when selected to open get yet again - the same crash error.
Was able to create a new user and same issues with that account. Any help?!My system has a PGP encrypted disk (so no booting from CD to fix). It appears that one of Apple's AUTO updates (though I have them manually turned off!!) has screwed my system to the point of making the OS show up as a version that is not running. Due to the versioning not being right the applications crash. The verdict: rebuild.
So yeah, this *****. -
Application crash with error ntdll.dll 00018fea
Hi,
I have a problem with my app.exe build.
I attach a simple code; the Vi open and close a TDM file.
If I run this Vi in Labview works fine.
If I build the application.exe on a notebook and I run it I got "Application crash with error ntdll.dll 00018fea".
I've tried to build the Vi on another Pc Desktop with Labview and here if I run the exe it works fine.
On the two PC I have LV8.5; the build options are the same.
On the notebook I've try also to reinstall LV8.5 but I got the same error.
Can you help me?
Thanks a lot
Attachments:
open tdm.vi 33 KBMicheleS wrote:
This morning I've try to put the ntdll.dll of the other PC in the notebook but the problem remain.
Never ever do that! You were very lucky that both ntdll.dll files were probably the same version so the exchange didn't do much but ntdll.dll is one of the core Windows DLLs were everything goes through that normal applications may access in Windows. A mixup in such a part because of incompatitible ntdll.dll with other system API DLLs might prevent your computer entirely from starting up even in safe mode.
You should not attempt to ever switch system DLLs between different computers. In such behaviour lays insanity. If you expect a system DLL to be corrupt attempt to do a repair installation instead. Also Windows nowadays has techniques to detect if a system DLL got corrupt and will attempt to repair it, though I guess if ntdll.dll would go belly up it's likely your computer won't even start up.
Rolf Kalbermatter
Message Edited by rolfk on 01-14-2008 08:05 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Printing in Vista with UAC enabled
I am running Acrobat 8.1.2 on Vista Ultimate SP1 with UAC enabled. My account is a member of the Administrators group.
When I open IE and try to print to "Adobe PDF", Adobe properly shows me the "Save PDF File As" dialog where I enter a valid filename. The save path shown is the "User -> Documents" folder (where I have proper file rights). When I click Save to save the PDF, a dialog shows up which says "For your computer's security, this file was saved to the Temporary Internet Files Folder. Do you want to open this folder?"
If you reply yes, it opens Explorer to a path where the PDF does not exist. I cannot find the PDF anywhere on my system.
My research on Google has resulted in comments which claim that this issue was resolved in Acrobat 8.1. Yet, I still have the problem.
If I set IE to "Run as Administator", the problem does not happen. But then I lose all the security benefits of UAC in IE.
Is there a way to fix this problem without disabling UAC or without disabling Protected Mode is IE which again helps protect my computer?
TIA,
PierreI'd like to report the exact same problem (I'm using Vista Business, SP1, UAC enabled) and add:
-- the problem persists after a complete reinstall of Vista (up to SP1 and all updates) then a clean install of CS3 Design Premium
-- Clicking on the Adobe convert button in IE7 seemingly works since something pops up in Acrobat but the file is actually distorted.
-- If I open IE7 using "Run as Adminstrator" the problem goes away. I also have no problem using print to pdf in other programs (Firefox, MS Office, etc.)
-- the above problem plus the event error below are hardware dependent: I have them on my Dell Optiplex 755 desktop (hard drives in ACHI/SATA mode) but not on my Vista SP1 Thinkpad laptop.
-- With Flexnet Licensing running, I also get 1 to 3 Event ID error#'s 1108 EVERY TIME I shutdown the computer (see your Event Viewer/Custom Views/Administrative Events):
"The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing."
Example:
1108
0
2
101
0
0x4020000000000000
7382
Security
xxxxxx-xxxx-PC
4647
Microsoft-Windows-Security-Auditing -
Portege M900 cannot detect/read from DVD drive - Need help badly!
I have this problem with Portege M900. My laptop cannot read from the DVD drive.
Does any one has similar problem? Need help badly as I cannot play my game from the CD.Test if the dvd drive is seated correctly in the compuer, I had a computer the dvd drive did not work until I removed one of the on back of the laptop (machine was a Toshiba different model) and then I was able to seat the dvd drive correctly.
-
Adobe reader not working. Needs help badly!!
I get this error message and will not read or open my PDF files pissing me off Please read and why is this doing this and how
do I fix this. Not happy!!
My error messge I get. I need help badly to fox this !!
Adobe reader could not open micro niche 14 Internet Marketing (1) zip because it is either not supported file type because the file
has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Can anybody Please help me !!!!!!!!!!!!!!!!!!!!!!!!!!
Michael Ladd and email is [removed]Adobe Reader cannot open ZIP files. It only opens PDF files.
-
Application crashes with timesten database over OCI connection
Application crashes with timesten database over OCI connection
#0 0x405e09f8 in kpudsany () from /home/oracle/TimesTen/ratingtt1121/ttoracle_home/instantclient_11_1/libclntsh.so.10.1
#1 0x405728d0 in OCIDescribeAny () from /home/oracle/TimesTen/ratingtt1121/ttoracle_home/instantclient_11_1/libclntsh.so.10.1
#2 0x43748a5a in GDBociDriver::StoredProcArgumentList () from /home/omni/library/libgfr_dboci.so
#3 0x4374e865 in GDBociDriver::StoredProcCallFormat () from /home/omni/library/libgfr_dboci.so
#4 0x4376ec9a in GDBociDriver::ExecuteStmtBind () from /home/omni/library/libgfr_dboci.so
#5 0x4376fc69 in GDBociDriver::Execute () from /home/omni/library/libgfr_dboci.so
#6 0x436ba240 in GDBstatement::Execute () from /home/omni/library/libgfr_dblayer.so
#7 0x43736106 in GDBociDriver::SetModule () from /home/omni/library/libgfr_dboci.so
#8 0x4366cb22 in GDBconnectionPool::GetConnection () from /home/omni/library/libgfr_dblayer.so
#9 0x4367a9db in GDBdriver::LoginConnectionGet () from /home/omni/library/libgfr_dblayer.so
#10 0x4373dbaa in GDBociDriver::Login () from /home/omni/library/libgfr_dboci.so
#11 0x4377380f in CreateOCIDriver () from /home/omni/library/libgfr_dboci.so
#12 0x4367bb2a in GDBdriverLoader::CreateDriver () from /home/omni/library/libgfr_dblayer.so
#13 0x436d423d in IGDBdriverMgr::GetDriverAndLogin () from /home/omni/library/libgfr_dblayer.so
#14 0x436d4da1 in IGDBdriverMgr::GetDriver () from /home/omni/library/libgfr_dblayer.so
#15 0x436a5071 in GDBserverDef::InitialLogin () from /home/omni/library/libgfr_dblayer.so
#16 0x433247cc in CcapAdbAccess::Init (this=0x9e85a88) at CcapAdbAccess.C:161
#17 0x43331c44 in CcapMain::Run (this=0x434eeb80, sdpId=2, processName=0x9dae29c "URE61_O2") at CcapMain.C:132
#18 0x080947d1 in ccap_thread (arg=0x0) at main.C:1588
#19 0x080e7bd2 in ThreadManager::WrapperRoutine (ipArg=0x9e84fc0) at ThreadManager.C:176
#20 0x0035f44a in start_thread () from /lib/libpthread.so.0
Timesten has some limitations and it says:
Describing objects with OCIDescribeAny() is supported only by name. Describing PL/SQL objects is not supported.
home/omni/library/libgfr_dblayer.so
Cloud you please tell us whit might be the reason for thisAre you able to provide exact details of the OCIDescribeAny call being made by the application (including parameter values)?
Chris -
Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me
You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
I just went into itunes and must of click on the wrong box to update my new contacts that i put into my yahoo address book as i wanted to transfer all to iphone and when done it erased all of them, how do i get them all back
-
How do I get rid of the blue box on my iCal on my iMac?
When I add an event in iCal, using my iMac, it is highlighted within a blue box on my iMac. When I add an event using my iPhone or iPad the blue box does not show up on my iMac. How do i get rid of the blue box on my iMac?
-
Text File Attachment in SAP Mail ECC 6.0
Hi, Is it possible to use a text format 'TXT' on the Function Module "O_NEW_DOCUMENT_ATT_SEND_API1" in ECC 6.0? Because I've seen alot of examples in the forum that are using 'XLS' Format attachments. I made a program that have been attaching text fo
-
How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.
-
Message threads change font size?
I noticed that the font size of previous messages was getting larger and larger with each successive email. I liked that. Now suddenly they are all the same size. How can I get back to the increase size? Thanks