Application won't download/install from distribution point

Hello,
I have a new distribution point that clients refuse to download application deployments from. The advertisement(s) get stuck at "Downloading 0%".
The DP monitor confirms that the package is distributed. Boundary and boundary group is created and should be OK for this DP (which has firewall disabled).
When I take a client and put it on a different subnet, the application downloads from another working DP.
Any suggestions?

CAS.log --->Download started for content Content_310d8d2d-9457-455b-ac4a-1a03fb4567f3.1
-->And it will just hang until I cancel the deployment/install on the client.
LocationServices.log --> no errors
Unable to retrieve AD site membership --> ????both the client and the DP are domain members
Distribution Point='http://MNTH-SP-SRV01.xxxx.local/SMS_DP_SMSPKG$/Content_310d8d2d-9457-455b-ac4a-1a03fb4567f3.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>', Signature='http://MNTH-SP-SRV01.xxxx.local/SMS_DP_SMSSIG$/Content_310d8d2d-9457-455b-ac4a-1a03fb4567f3.1.tar', ForestTrust='TRUE'
(MNTH-SP-SRV01, this is the DP I'm trying to deploy from)
DP is associated to a boundary group, and the boundary with the address range which the server is on is a member of the boundary group.

Similar Messages

Adobe Inspiration Browser Update and Adobe Air won't download/install?

I get repeated error messages, that it won't download/install. I followed the instructions. All I get is "a download error occurred. Try again?" Not much help there!!!!!! Now what?

Hi anon2011
Adobe has stopped supporting IB in PSE11 and is moving towards cloud sharing via Adobe Revel. In view of this I wouldn’t worry too much about installing or updating.
All of the tutorials can now be found on Adobe TV.

Remove package from Distribution Point

I have been fighting with an OS deployment for the last day. The log was showing it was unable to find the package p0100001 which was my boot image. I eventually got it working as I failed to configure my boundary correctly. But it got me wondering...
In SCCM 2007, it was pretty straight forward on how to remove packages from distribution points. But I still can't figure out how to remove a package, specifically a boot image, from a DP. I can view the distribution in the monitoring section and see the
package successfully deployed, but what if I wanted to remove that boot image from the DP? How is this done. I'm sure it's staring me in the face, but I'm missing it. Thanks!

I realize this is an old post, but I am dealing with the same issue regarding the removal of deployment package contents from Distribution Points. After removing a Distribution Point from the Contents Locations tab on one of my Deployment Packages,
how long does it take for the deployment package to be removed from the distribution point. I have removed a large deployment package from a distribution point, but am not seeing any increase in the available free space.
Any help would be appreciated.
Muskie
Muskie

IPhoto won't download photos from camera.

iPhoto won't download photos from camera. iMac 10.6.8; iPhoto updated. No Name comes up, says "downloading," but color wheel only goes round and round. I've let it go on for 20" to no avail. Only way to get out of iPhoto then is to Force Quit. Tried downloading pictures through a Card Reader with same results.
Same camera, same procedure for last 5 years and never had this problem. Thanks for any advice.

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Why are application updates failing to install from application manager

Why are application updates failing to install from application manager?

Usually some update from another app is blocking any subsequent patches. The general cure is to run the Creative Suite Cleaner Tool, let the application manager reinstall and then let it try to update each application at the same time to prevent those version conflicts...
Mylenium

SCCM 2012r2 - Remove "invisible" packages/applications from Distribution Point

Hello alltogether,
I've encountered the following issue:
Our distribution points are displaying applications/packages as "In Progress - Waiting for Prestage content".
These packages doesn't exist anymore. Neither as prestage file nor in the config manager itself. We never tried to apply this package by using a prestage file because such a file never existed.
Even if I open the "content" tab of one distribution point, I can't find these packages in there.
The exact status of this package is the following:
Message: Distribution Content
Message Detail: Distribution Manager instructed Package Transfer manager to send Package "x" to distribution point "y".
Status Type: In Progress
I want to remove these "ghost" packages from the Distribution Status overview. Anyone has a clue how to accomplish this?
Thanks in advance!
Best Regards
Feyh

Hello,
thanks for your answer!
Unfortunately no, there is no information about these files.
Yesterday we installed a new one, extracted all of our prestage files on it and watched the status. The Packages weren't listed in the "Distribution Point Configuration Status".
After some time we added the new DP to our general DP-group where all of our packages/applications are assigned to. Now the "non-existing" packages are added with the "in Progress" status.
I had a look into "Distribution Point groups -> Our group -> properties -> content" but these packages aren't displayed in the list. Some of the packages are now in the "waiting for prestage content" state, others are staying with the "Detail will
be available after the server finishes proccessing ...".
We managed to remove one of the packages by deleting it from the database.
The following statement removed it from the Distribution status overview. However, we still are able to find the package in the database.
select * from SMSPackageswhere PkgID = 'P100003B'
DELETE from SMSPackages
where PkgID = 'P100003B'
Apparently the delete-statement affected 72 rows. But we are having no clue which. As long as we are not sure we killed anything important we are not going to do this with the other packages because it's the productive system. We can't reproduce this in our
test system...

Application stuck transferring to child primary distribution point

I have a single application (not a package) which is refusing to distribute to one of the child primary site servers.
Bit of background: The server was built a few days ago and all packages were prestaged and loaded onto the server successfully except for one.
- The content status for this particular package is sitting at the state of "In Progress" (Starting to process content)
- The despool component manager is continually reporting message ID 4407 (Despooler successfully receveied the compressed image for package XXXXXXX version 9.)
- The despool.log periodically reports these messages (This package's information hasn't arrived yet for this version [9]. Retry later...) followed by (Despooler failed to execute the instruction, error code = 12)
- Distribution manager component status will loop through status messages 2300, 2311 and 2301 (Beginning to process package, Successfully created or updated package and Successfully processed package)
- Distmgr.log will report that the StoredPkgVersion is 5, and the SourceVersion in the DB is 10.
I have tried
- Removing the package from DP, waiting, and then re-adding it
- Updating the distribution points (increment the version number from 9 to 10)
I recall having this issue in 2007 with standard packages, and I could fix this easily enough by updating the PkgStatus table and then refreshing the DP so it would re-download the content and work its issues out.
In 2012 it is clearly different, especially because I'm dealing with an Application and not a Package per se.
Is there a way to fix this? (Other than deleting the package from existence and recreating it)
Is there a way to clear all previous knowledge of this application at this particular child site, allowing it to just transfer the current, latest version of the content? (similar to how one would have fixed this in 2007)
Thanks in advance!
Tim

Hi Jason
Thanks for the reply.
The AV product does not appear to be getting in the way.
The activity in sender.log looks healthy, I can see the CAS transferring data across to this site (and others) without error.
All other content (Update packages, regular packages and OSD images) have distributed correctly
We did turn off the "Enable this distribution point for prestaged content" feature after doing the initial prestage of all media.
Is there a way to clear this package from a given child site so that we can distribute it down again and it ignores the older StoredPkgVersion that it has?
One thing I have noticed, before I left for the day yesterday, I deleted this package from this particular distribution point. Despite doing this, the despooler continued to loop the message ID 4407 (Despooler successfully received the compressed image for
package XXXXXXX version 9.) over and over again.
The current version of the package is 10, what this server allegedly has according to DistMgr.log is version 5.

SCCM 2012 client push occurs from site server or from distribution point?

I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank you

The initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How long until Deleted Content from Distribution Point frees disk space?

Hopefully this is an easy question for you guys with more experience with the product.
Yesterday, I created a new software distribution group for Office 2013 SP1, both 32 and 64bit. I didn't really understand at the time that it was going to download nearly 8GB into my /sources folder...which is where I save my package contents. I
would have not expected this download to exceed approx 2GB.
Since I indicated that it should also be distributed to my Distribution point, which is the same server, it also increased the disk usage in the /sccmcontentlib folder, as well as increasing the amount of space used in my SQLDatabase which is on the same
drive. It was never deployed to anything.
Since I'm not yet ready to deploy this update to clients, but have a few others things to do instead, I wanted to delete the content from the distribution point to free up some disk space.
I went into Software Library, Deployment Packages, went to properties of my Office2012_SP1 deployment, went to Content Locations, picked my single distribution point from the list, and chose Remove.
However, no disk space was cleared on my drive. I've still got 6GB free on my 120GB volume, so I'm not out of space.
Is this something where a scheduled job will come through and process this removal and free up the disk space? Or is there a way to kick of the process manually?

It was never setup as an application.
It was a Windows Update, which was added to a software update group. Then, I went to the software update group and right clicked and chose Download. I created a new deployment package, and then distributed the content to one of my distribution
point.
By doing that, I understood that it would create the D:\sources\WindowsUpdates\Office2013_SP1 folder and put the deployment files there. And I also see that because that content was set to a distribution point, it copied it there into the ContentLib.
So, I wanted to remove the data from ContentLib, so I went to the Deployment Package, went to Content locations and removed my Distribution Point.
So, are you saying that in order to remove the ContentLib, that I have to remove the entire Deployment Package?
I thought by removing the Content Location it would remove it from the DP, and if I later wanted to add it back ,I could go back to the Deployment Package, go into Properties and add a DP back to the content location.

Help: contacts won't download/sync from Mobile Me to iPhone?

My new iPhone won't download old contacts from MobileMe. It will sync any new contacts or calendar event I add to either the iPhone or Mobile Me, but not the existing ones.
Basically, I bought my first iPhone a couple of days ago. I just followed the prompts and ended up sync'ing it with gmail as well as pulling all the contacts off my old SIM and phone. But I ended up with lots of duplicate contacts. So I set up a Mobile Me account and uploaded all the contacts from the iPhone, no problems. Then I cleaned up all my contacts on Mobile Me, got rid of duplicates etc.
Then I reset my iPhone to clear all data so I could start afresh (I've only had it a day or two so there wasn't much to lose). I thought I would be able to easily pull all the nice, clean contacts down from the cloud. But the only contacts that will sync are new ones, not the old ones.
If I add a contact on Mobile Me, it downloads to the iPhone. If I add a new contact on the iPhone, it uploads to Mobile Me. But the hundreds of old contacts I have amassed over many years and many different mobile phones are stuck in the cloud and won't come down!
All these contacts only ended up on Mobile Me after being sent from my iPhone, so not sure why it won't take them back.
I'm on a PC. I have sync'd the iPhone with iTunes since I reset it. And I have downloaded the latest version of the iPhone OS since I reset the phone. I have tried turning off all sync'ing and then turning it on again - the iPhone asked if I wanted to merge data, I said yes, but it didn't download any of the old contacts.
Obviously sync works, but why won't it get my old contacts?!
The only thing I haven't tried is resetting all sync data - http://support.apple.com/kb/HT1497. However, how can I back up my Mobile Me data before I erase it? I didn't think my Mobile Me contacts would sync with a PC?

Turn off contacts in MobileMe on the iPhone and choose keep contacts on the iPhone
Connect iPhone to iTunes and enable sync contacts to Windows Address Book or Outlook 2003 or higher. Now there should be a copy of the contact on the computer.
Make sure you have installed and configured the MobileMe control panel on your computer. And set it up to sync contacts. Choose the best copy(Cloud or Computer)for the initial sync(can be from Cloud to computer or computer to cloud).
http://www.apple.com/mobileme/setup/
Once the computer and Cloud have the correct info then slide contacts back to on within the Mail Contacts Calendars on the iPhone and choose replace iPhone with info from the Cloud.
Uncheck Sync Contact with computer within iTunes on Info tab(if you do not then you will get duplicates).

Help! Applications won't download?

So my phone is activated and unbricked at the store. After 7 hours at the mall, I went home and everything was working except the applications.
For example, when I tried to download the facebook app...
On the iPhone: I clicked install, I signed in and then the little icon came on the home screen with the facebook logo and loading... then it told me that it couldn't verify and to hook on to iTunes.
On iTunes: I found the application. Tried downloading it, signed on and it gave me the following error message:
+*We could not complete your iTunes phone request. An unkown error has occurred (-9808).*+
+There was an error in the iTunes store. Please try again later.+
This has been going on since yesterday. Now, when I try to download a song, it gives me the same error? Is this still a problem like yesterdays or is there something wrong with my iTunes?
When I run diagnostics, the network interfaces and internet connection is verified. But the secure link to the iPhone store fails. When I click the help button, it takes me to an apple help page that tells me to fix my security settings (which was already default like it needed it to be).
Here is the report:
+Microsoft Windows XP Professional Service Pack 2 (Build 2600)+
+Foxconn OEM+
+iTunes 7.7.0.43+
+QuickTime 7.5+
+CD Driver 2.0.7.3+
+CD Driver DLL 2.1.1.1+
+Apple Mobile Device 2.0.0.33+
+Bonjour 1.0.4.12 (118.4)+
+iTunes Serial Number 32E90454878EE130+
+Current user is an administrator.+
+The current local date and time is 2009-07-12 14:49:34.+
+iTunes is not running in safe mode.+
+Video Display Information+
+VIA Chrome9 HC IGP+
+External Plug-ins Information+
+Plug-in Name: myTracker+
+Plug-in Loaded: Yes+
+Plug-in Version: 0.8+
+Plug-in File Version: Unknown+
+Plug-in Path: C:\Program Files\iTunes\Plug-ins\myTracker.dll+
+Network Connectivity Tests+
+Network Adapter Information+
+Adapter Name: {DA42DF80-3BFD-4328-8130-BBD2A27A0480}+
+Description: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport+
+IP Address: 192.168.0.6+
+Subnet Mask: 255.255.255.0+
+Default Gateway: 192.168.0.1+
+DHCP Enabled: Yes+
+DHCP Server: 192.168.0.1+
+Lease Obtained: Sun Jul 12 08:46:14 2009+
+Lease Expires: Sun Jul 19 08:46:14 2009+
+DNS Servers: 154.11.128.59+
+ 154.11.128.59+
+ 154.11.128.187+
+Active Connection: LAN Connection+
+Connected: Yes+
+Online: Yes+
+Using Modem: No+
+Using LAN: Yes+
+Using Proxy: No+
+SSL 3.0 Support: Enabled+
+TLS 1.0 Support: Enabled+
+Firewall Information+
+Windows Firewall is on.+
+iTunes is enabled in Windows Firewall.+
+Connection attempt to Apple web site was successful.+
+Connection attempt to iTunes Store was successful.+
+Secure connection attempt to iTunes Store was unsuccessful.+
+An unknown error occurred (-9808).+
+Secure connection attempt to iPhone activation server unsuccessful.+
+A secure network connection could not be established.+
+Last successful store access was 2009-07-12 14:44:56.+
+The date and time on this computer is not set correctly. Secure connections to the iTunes Store may fail.+
The only thing I could fix is the date and time but I already synced that with time.windows.com?
I would really appreciate any help. Thank you!

There are two ways to recover from this condition.
1. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. Stop or resume the download.
2. Open LaunchPad and find the icon of the app you're trying to install. There will be a small progress bar below it. Click the "X" to stop the download.

What is the process that SCCM clients access content from Distribution Points?

I already know that the (Network Access Account) NAA is one method, and that it also has to have the
Access this computer from the net network right configured on the Distribution Point (Default server settings allow this). I am trying to understand what happens when the connection to the Distribution Point fails when using the NAA. Does the
client use the computer account (computername$) of the SCCM client or is the SCCM Site Server account (SCCMSiteServer$) instead. After reading
this and
this, I am not sure now. Hopefully someone can help clear this up.
--Tony

The first link also states: When Configuration Manager tries to use the computername$
account to download the content and it fails, it automatically tries the Network Access Account again, even if it has previously tried and failed.
The way this reads to me is that the Network Access Account is first attempted since it is tried again after the computername$ is
attempted. Peter, I am I just misunderstanding what it is trying to say? Also, is computername$ referring to the client machine and not
the SCCM site server? Is the SCCM site server ever used which is referenced in Gerry's blog?
Just to make sure I completely understand the process goes:
Local Computer account (ComputerName$)
Network Access Account (NAA)
No use of SCCM Site Server\s
--Tony

Really weird problem -- won't download mail from one sender

I'm having a really weird problem. Apple Mail won't retrieve mail from my Gmail account via POP3 from one sender only. All other mail is downloaded normally, except from a particular sender. What could be causing this? Thanks.

I am trying to remember and research something about the Junk filter and Gmail accounts. Have you checked in your Junk mailbox, if Junk in enabled and there is a separate Junk mailbox?
If you click on my name to the left, and look in the bio line of the resulting Profile, you will find an email address you can reach me with. If you email me at that address, I will send you a Gmail address that your sender can test sending a message to me at my Gmail account.
Ernie

Download files from Shared Point document library using SSIS packages

Dear All,
Can you please help me on how can I download excel/CSV files from share point document library to local machine using SSIS packages.
Regads,
Praveen C
Regards, Praveen

Hi Praveen,
You can also implement
custom component or try third party custom component such as SharePoint List Adapters:
https://sqlsrvintegrationsrv.codeplex.com/releases/view/17652
Regards,
Mike Yin
TechNet Community Support

NY Times Application Won't Download New Content

The New York Times application on my 2nd gen. touch won't download new stories. When I hit the refresh button, the status bar "Downloading Latest News" appears, but it remains at 0%.
My other apps have no problem connecting to the internet - mail, YouTube, Safari, Joost, etc.
I've tried uninstalling the app and reinstalling it, restarting and resetting my iPod, and resetting the settings.
Any suggestions?

I have the same problem. Wife loves to read the NYT and this was one of the primary reasons I was able to talk her into getting a touch. Have tried resetting the network setting, resetting the app, reinstalling the app, restarting the ipod between all of the above, erasing and resetting the whole ipod. Nothing works.

Application won't download/install from distribution point

Similar Messages

Maybe you are looking for