Apply a default colour for a measure

I would like to be able to colour code groups of measures in one pivot table.
I have several tables with calculated measures and want to add them to one pivot table but would like to show visually which ones are related. i.e. 6 are acute care, 5 are emergency, etc.
Can this be done?

You can hard code the coloring if the pivot table will not change, or you can use conditional formatting with a list of the measure names if the pivot table layout will be changing over time.
There is no color attribute of a measure, this is all handled by Excel, not by Power Pivot.

Similar Messages

Change Smart View default colours for all clients

I need to change Smart View default colours. But it must be done in a centralized way, so I can not set it up at the client level. I'm not sure if Smart View takes defaults from planning.css styles, or if they're defined somehow at the provider, or maybe specified in client installer.
Thank you in advance for any guidance on this.
SD

SD,
You may want to work with Oracle SmartView Support, to see if / how it is possible for SmartView, using a Service Request.
Thanks!

I seem to have grey as a default colour for some websites, can't read the page. any ideas for curing this please?

When I visit some webpages - example www.thephonebook.bt.com - I cannot read the pages because they are grey and the info fades into the page and is unreadable. Can I change the colour of website pages or is there something else I can do or undo?

Two suggestions.
1 This page contains some 'zap' bookmarklets. 
https://www.squarefree.com/bookmarklets/ 
Note the instruction at the top on how to use them.
Pressing 'zap' on sites with grey print turns it black.
2 This addon can be used to restyle pages that you use a lot 
[https://addons.mozilla.org/en-US/firefox/addon/2108/ Stylish] 
It's rather technical, but setting up a style rule for this site such as 
<pre>* { color: black ! important ; } </pre>
can fix it.

Default ViewCriteria for ViewObject

Hi,
I am having issues with applying a default viewcriteria for a VO.
1. I have a VO1 based on EO1.
2. VO1 has 2 instances in AM1
VO11
VO12
3. VO11 is binded to Table on UI
4. VO12 is used to insert data in the EO1 from Model.
Use-Case : I can insert rows in the EO1, but want to display only particular rows depending on some Criteria.
Therefore, I applied the same criteria (ViewCriteria) on VO11, which is binded to UI table in the AM DataModel.
The problem is, my approach works fine if all the changes are committed, however, if in a single transaction,
if I insert 2 rows in EO1 but only want to display 1 row, via VO1 on UI,
VO1 doesn't show any data.
If I commit the changes, things work fine.
Any suggestions shall be highly helpful.

Hi,
the View Criteria can be set to filter from memory, database and both. You want to set it to both. See !Query Execution Mode" next to the View Criteria Name
Frank

Change colour for unspecified Items

in 10G how can i change default colour for unspecified Items ?

if i have item in forms 6 with background unspecified it will take a default color but
when using items in forms 10 with background color unspecified takes other
color so where i put the default color for unspecified items to act as the forms 6

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

How to set a default colour & thickness for rectangle in preview?

How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .

Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.

Can't select CMYK text colour for text fields in Acrobat Pro forms?

I have designed a business card template in Indesign, and now want to use Acrobat Pro to add in text fields so that a client can edit the contact details on the cards in future.
I need to select a specific text colour for the fields, so that it matches the rest of the design. The cards will obviously need to be printed and the document has been set up in CMYK, but when I enter the CMYK colour breakdown in the Properties > Text Colour panel, it won't apply the colour to that field. The text either stays at the default black, or reverts to RGB - which isn't suitable for printing and doesn't match the colour I need.
Can anybody PLEASE shed some light on this? Other similar posts have either not been answered or people have suggested JavaScript..? I have no idea what I'm supposed to do with a JS code..? Surely there's an easier explanation?
Thanks in advance.

This is for a text field that you create in Acrobat, whether the form is used offline or online. The script is a custom Format script, which you can place by bringing up the Properties dialog for the field, select the Format tab, set a format category of Custom, and you should see where you can enter the script. Change the string "Instructional text goes here" to the text you want to display when the field is blank.

Is there a way to change the default colors for iPad apps?

I noticed one of my friends iPad 2 had a different color scheme for apps and I would like to change my iPad 2's default ( which is currently grey). To elaborate, the default color for the borders and tabs in Safari are grey on my iPad, my friends are blue. Would like to change from the drab grey color to blue also but I cannot find a setting for this. All applications and Setup apps have this default color scheme on my ipad. Do I have to reset the iPad and start over with setup to achieve this? Hope not, perhaps someone can shed some light on an easy way to do this. Thank You!

You can apply system-wise "negative" color effect under Settings > General > Accessibility, by toggling the White and Black switch - and, in iCab Mobile (and some other, better browsers / PDF readers), its own "night mode" negative color scheme.
Otherwise, no, you can't do anything else except for asking third party app authors to add selectable back/froeground (=text) colors to their apps.
There is an article dedicated to this question: http://www.iphonelife.com/blog/87/do-you-find-your-idevices-screen-be-too-blueis h-or-just-too-harsh-bedtime-reading

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to configure and set a default view for contents of a data set

Here is my scenario:
I have a document library where each item is a "Plan". "Plan" is of a custom content type that inherits from a Document Set content type but has some additional attributes such as Plan Type. Inside each Plan, each item is
a Plan Document which is of custom content type Plan Document which inherits from Document content type but has some additional attributes e.g. Document Status.
So the hierarchy is:
All Plans (document library)
Plan 1 (custom content type that inherits from Document Set but also has a "Plan Type" attribute)
Plan Document (custom content type that inherits from Document but also has a "Document Status" attribute
When I click on the document library, I want to see all the folders (e.g. Plan 1) where one of the columns will be "Plan Type"
When I click on an individual Plan (e.g. Plan 1) I want to see the contents of that custom document set. At this point, since this page shows contents of one document set, I want to see the column "Document Status" but NOT Plan Type since
Plan Type applies to the document set as a whole, not to an individual item in that document set.
However, I don't think I have it set up correctly because right now the "Plan Type" column is visible both on the list of all document sets AND on the page that shows the contents of one document set.
I've found a discussion on this topic here:
http://sharepoint.stackexchange.com/questions/61565/how-can-i-set-a-custom-default-view-for-a-document-set
where one person said "When you click on a Document Set content type in library settings, one of the options is "Document Set settings". The last option in this dialogue allows you to select a defined view on the library that will be used
to show the contents of that Document Set." I don't see that view selection. The last item on the document set settings page is "Update List and Site Content Types". The field before that is for customizing the Welcome page.
However, I don't want to customize the Welcome Page as a whole, I just want to customize the columns that are displayed on the list of content of this document set.
thanks

I finally found the answer:
At the document library level, create a new view to use when displaying the files in the document set
Go to the document library settings
Select your custom content type (in my case it was "Plan")
In the next screen select Document Set settings
Select your newly created view at the Welcome Page View section
Press Ok
Now the default All Documents view will be shown when displaying all the document sets and the newly created view will be displayed when viewing one document set with the files within.

Is there a way to apply different dimension filters to two measures

Dear all,
Let's say I have a report that goes something like below:
TIME DOLLARS FORECAST DOLLARS
JAN 99999 99999
FEB 99999 99999
MAR 99999 99999
APR 99999 99999
MAY 99999 99999
DEC 99999 99999
What I would like to achieve is this:
TIME DOLLARS FORECAST DOLLARS
JAN 99999
FEB 99999
MAR 99999
APR 99999
MAY 99999
DEC 99999
i.e. DOLLARS displayed only for first two months (or whatever. May be because the report is being run in March). And for rest of the year I display forecast.
Please note that I do not want to achieve the above with the help of "formatting".
What I am looking for is "an ability to apply two separate filters (for the same dimension) on two different measures in the report". i.e. in the above case DOLLARS has a filter of JAN to FEB; and FORECAST has a filter of MAR to DEC.
How can I do this in Discoverer? Any hint/ pointers are greatly appreciated.
Cheers.
pxsheth.

Hey there.
I'm not sure exactly what you mean when you say you don't want to achieve with help of formatting.
See if this suggestion makes sense - and doesn't fall into that formatting camp.
The only way to add a column in Discoverer is via calculations.
So if you have a column called dollars and one called forecast_dollars then I would think you'd want to determine the month of the run date - or ask user what month they want to run it for.
You don't say how you determine forecast_dollars but let's just say all the columns come from data.
So could you not have a condition that brings back the data for a date range (ie: current year or ask user for from / to dates). Then:
calc_dollars calculation: equals the dollar amount brought back from the query if record month <= current month else 0.
calc_forecast_dollars calculation: equals the dollar amount brought back from the query if record month > current month else 0.
So in practice:
table A has 3 columns: time, dollars, forecast_dollars
condition: where time between from_date_parameter and to_date_parameter
calc_dollars: SUM(case when time <= SYSDATE then dollars else 0 end)
calc_forecast_dollars: SUM(case when time > SYSDATE then forecast_dollars else 0 end)
That gets you a time column, a dollars columns and a forecast_dollars column.
In your example, it appears you want forecast_dollars in the same column. I'm assuming this is incorrect but if you wanted it, you'd just have one calculation such as:
calc_bucks: (case when time <= SYSDATE then dollars else forecast_dollars end)
So, is this the kind of thing you want or would this be more formatting?
Russ

Apply the default user logon picture to all users

Hi
I applied gpo "apply the default user logon picture to all users"
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
C:\programdata\Microsoft\User Account Pictures\user.bmp --> renamed my company log to user.bmp.
Taken backup of old user.bmp.
But policy is not working.
Environment:
Windows Server 2008 R2
Clients:Windows 7 and Windows 8

Hi S.Vijay Kumar,
Based on my understanding, the GPO which configured the
Apply the default user logon picture to all users would not apply successfully. What’s more, you have customized the default user logon picture
%ProgramData%\Microsoft\User Account Pictures\user.bmp. Right?
Firstly, please check if the scope of this GPO and the setting of Filtering are correct.
Secondly, please follow the steps below to check if the GPO is applied to these Windows XP clients:
Click Start, type rsop.msc in the search box to access
Resultant set of policy.
Check if the GPO is applied to these clients and the setting of the GPO is correct.
In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
Did the GPO fail to apply for all the computers or only some computers?
Can you set the user.bmp as the user logon picture
manually?
Regards,
Lany Zhang

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

Apply a default colour for a measure

Similar Messages

Maybe you are looking for