Apply GPO only when logon

Hi All,
This is my case:
My customer has several Access 2013 frontend files. Based on the membership of a security group will be the correct frontend file copied to the desktop of the user. This file is copied by a GPO (file preferences). In the preferences is "Item-level targeting"
configured, so only members of a defined group get the correct frontend. This work fine. So the users logged in, the GPO applied, the right frontend file will be copied and the users can work.
But, after a few hours users start complaining about an error in Access. Some research told me that the frontend was copied again in the meanwhile. Because Access was already open, errors appeared. I suspect that the GPO is applied again. How can I take
care about this? The GPO must only run when the user logon...

> Some research told me that the frontend was copied again in the
> meanwhile.
What "mode" did you set in the GPP item? If "replace", this behaviour is
expected.
It might help to add a second ILT for "processing mode is NOT
(background or manual)" (don't try "processing mode is foreground" -
that doesn't work for whatever reason...)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Apply certain css styles only when JS is enabled?

I'm wondering if there's a relatively simple way to apply certain CSS styles only when JavaScript is enabled in the browser (and thus, not applied when JS is disabled)... I've created a jQuery-based image gallery, and I'd like to modify how it degrades by selectively disabling certain CSS styles...
thanks for any direction here.

Hi
As your jQuery image gallery would not work correctly if javascript was disabled,. The better approach would be to enable the required css styles using jQuery, (the title says this, but your post says the opposite).
To do this see the jQuery documentation regarding css, at -http://api.jquery.com/css/.
PZ

Apply the default user logon picture to all users

Hi
I applied gpo "apply the default user logon picture to all users"
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
C:\programdata\Microsoft\User Account Pictures\user.bmp --> renamed my company log to user.bmp.
Taken backup of old user.bmp.
But policy is not working.
Environment:
Windows Server 2008 R2
Clients:Windows 7 and Windows 8

Hi S.Vijay Kumar,
Based on my understanding, the GPO which configured the
Apply the default user logon picture to all users would not apply successfully. What’s more, you have customized the default user logon picture
%ProgramData%\Microsoft\User Account Pictures\user.bmp. Right?
Firstly, please check if the scope of this GPO and the setting of Filtering are correct.
Secondly, please follow the steps below to check if the GPO is applied to these Windows XP clients:
Click Start, type rsop.msc in the search box to access
Resultant set of policy.
Check if the GPO is applied to these clients and the setting of the GPO is correct.
In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
Did the GPO fail to apply for all the computers or only some computers?
Can you set the user.bmp as the user logon picture
manually?
Regards,
Lany Zhang

When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED ra

When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
Applied patch
6241631 11i.ATG_PF.H.delta.7 (RUP 7) and it's pre-requisite patches
Forms can not be launched successfully.
APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
Followed
Note 391243.1: Unable to access forms - getting APP-FND-01926 error (Doc ID 391243.1)
Note 555409.1: Client Gets App-Fnd-01926 Every Time After Bounce Apps 11i Forms Service (Doc ID 555409.1)
these two notes, can not solve the issue.
Executed following action plans:
1. Backup custom.pll file on your issued instance(DEV instance).
2. Copy a custom.pll files from a working environments(i.e. PROD instance) to this issued instance(DEV instance).
3. Compile the new copied Library CUSTOM.pll manually by running the command:
f60gen module=CUSTOM.pll userid=APPS/APPS output_file=$AU_TOP/resource/CUSTOM.plx module_type=library batch=no compile_all=special4. The $FORMS60_PATH needs to be in sync with the the Context.xml specifically the s_f60path variable
i.e >/oracle/apps/test10appl/au/11.5.0/resource:/oracle/apps/test10appl/au/11.5.0/resource/stub</FORMS60_PATH>
5. Run Autoconfig instantiate the changes.
Issue still exists.
Please HELP~~
Thanks,
Jackie

Hello Srini,
app11i@hpfsapp2> ls -ltra CUSTOM
-rwxr-xr-x 1 app11i dba 24576 Aug 29 2001 TMCUSTOM.pll
-rwxr-xr-x 1 app11i dba 20480 Mar 8 2006 CUSTOM.pll.backup
-rwxr-xr-x 1 app11i dba 24576 Feb 22 2007 CUSTOM.pll.20120215
-rwxr-xr-x 1 app11i dba 32768 Oct 4 2007 CHRM_CUSTOM.plx
-rw-r--r-- 1 app11i dba 36864 Oct 8 2007 CHRM_CUSTOM.pll
-rwxr-xr-x 1 app11i dba 20480 Feb 14 15:20 TMCUSTOM.plx
-rw-r--r-- 1 app11i dba 24576 Feb 15 09:22 CUSTOM.pll
-rwxr-xr-x 1 app11i dba 16384 Feb 15 09:23 CUSTOM.plx
I don't quite understand "only one copy of CUSTOM.plx in the PATH directories", what is PATH directories? How to check? You mean environment variable?
EBS version: 11.5.10.2
DB version: 9.2.0.8
OS: Linux x86
Thanks,
Jackie

Condition type has to executed only when other condition type is availabl

Scenario: We have two freight condition types YHD1 & YHD6. This YHD6 condition type is a Percentage type calculation and dependent of YHD1 value, for example
YHD1: 30 EUR then the condition value is 30 EUR
YHD6: 10 % then the condition value is 3 EUR
Issue: YHD6 is fetched from Condition records at the time of delivery document, where as YHD1 condition type is inserted into the delivery document through a BDC program in a custom program. BDC program is written in such a way that YHD1 condition record is applied on the first line. This custom program is supposed to execute only after PGI is done for delivery and shipment is created.
Since, YHD6 is fetched from Condition records; this condition is applied when the delivery document is created. And when this custom program is executed, system is looking to insert YHD1 condition on first line, but YHD6 is already exists this step is unsuccessful.
Requirement: is it possible to determine YHD6 condition only when YHD1 is available in the document. I mean, YHD1 condition type has to be executed first and then YHD6.

Hi All,
Thanks for repling to my query.
I will explore the opition of developing a Routine to restrict YHD6 condition type. But i have one doubt, suppose i have assigned a routine to YHD6 condition type and when delivery document is created, system fetches the YHD6 condition from the condition record, but due to this routine it will restrict to update the value.
But when i update the delivery document with YHD1 condtion through custom program, NOW, does the system calls YHD6 again so that now the requirement is fullfilled or do i need to update the Pricing again after YHD1..
I kindly reqeust you to clarify my doubt, however, i will take up this with my ABAPer and develop a routine.
Thanks in advance.
Warm Regards,
Sridahr

Is there a setting where a text frame (border, color, etc) will be visible only when it has content?

I use data merge a decent amount, often when I am quick prototyping decks of cards for games. (Talk about an awesome tool for quickly cranking out a hundred different cards). I was wondering if it possible to have a text frame style (say a 1pt solid black border, or a yellow background etc.) appear only when there is text inside that frame.
For example the cards need to have different combinations of text on each one. The lower part of this particular card has 30 data field placeholders (15 text frames and 15 graphic frames) that are linked back to my .txt file with data merge. (In the first image below, all 30 data fields have data in them, the other images only have some data applied) The text frames hold the two letter code, the graphics frame is basically a .png of either a rectangle or oval which is on a layer behind the text frame.
It would be awesome if a text frame border was only present when there was content in the text frame. That way I could eliminate all of the graphics frames in this particular case. Is this possible? I knid of don't want to ask this, but is it possible through scripting with some sort of conditional statement? (Iknow very little about scripting except that it exists to do certain tasks on a as needed basis)
I'm using InDesign CC on Mac OSX 10.7.5
Thanks!
go-dog-go

There's no one solution. Depends on the context.
When we know what we have and where we want to go, everything becomes simple ...
In your case, the solution I prefer is that with grep styles.
Why? because it is truly magical.
The beginning...
All you finally have to do in the data file is inserting columns of calculation. We can talk later.
This solution with grep style is very simple to define. In ID and Excel (for instance). Because I know how to do. I understand It could be not so simple for another person.

Having trouble getting "Set action to take when logon hours expire" to work - Windows Server 2012

I have a Windows Server 2012 server that allows remote desktop users (sessions are hosted on the server itself). I'm trying to enforce logon hours for these remote desktop users.
I have specified logon hours for a user and confirmed that they work--they aren't allowed to logon when logon hours are disabled. However, they are allowed to continue a session past their logon hours limit if they are already signed in (which is fine, this
is the default behavior).
However, when I try to use the `Set action to take when logon hours expire` option (`User Configuration/Administrative Templates/Windows Components/Windows Logon Options/Set action to take when logon hours expire`), and set the behavior to "Logoff",
nothing happens--the user can continue their session happily. I've tried applying this policy both for the user's group and for the local computer. I've run `gpresult` for the user and confirmed that the policy is apparently in place.
I also naively tried the "Force logoff when logon hours expire" option, but that apparently doesn't apply to interactive logins (confusing!).
Am I misapplying this setting, or do I need to take some other steps to get it to work? I'd be grateful for any input. Thanks!

Hi,
Sorry for the late response.
We can log off and log on again to see whether the setting gets applied.
According to
Policy Settings that require a reboot or logon section in the following article, this setting needs a logon.
Deploying Group Policy Using Windows Vista
http://technet.microsoft.com/en-us/library/cc766208(v=WS.10).aspx
Best regards,
Frank Shen

My sound sounds like it is ina barrel only when iam on teh Internet with Utube & Netflix

The Question all info - My sound sounds like it is in a barrel only when i am on the internet with Utube & Netflix

Thank you! Resetting resolved the issue with terrible sound when trying to use skype. Sounds much better!
I am not sure what all changed when reset was applied to settings --- assume it defaults back to basic settings. I have no idea what I had customized, so will slowly figure out. I have noticed several things. So far I had to add back my wallpaper and reenter password to get back on my wi-fi.
At least SKYPE is now audible.

Application set at Osoft webiste visible only when IE run as COM+ user?

Hi,
we have installed BPC 7.5 SPS08 version for NW to one of our machines and configured it.
When we open IE and try to access Osoft website / Adminsitration - we are able to select Application set ONLY when we run the IE as the COM+ user which is set in Server manager (in our case <domain>\BPC_SYSADMIN).
When we run the IE as any other user we can not see any application set to choose from in pop-out window.
My question is - is this (with <domain>\BPC_SYSADMIN user) the normal and the only way to successfully load application set at Osoft website?
Thanks!
Erik.

Hi Erik,
Are you able to logon to BPC for Excel or BPC Admin client with any user (not the COM+ user) and see any available AppSets/Applications?
If this is a fresh install and you haven't managed BPC security settings yet then this behavior would be expected.
On a fresh install you set up an admin user by running program UJA3_WRITE_SYS_USERS. You can check this on t-code SE16 and display table UJA_SVR_DEFAULT values.
Only this user will have access to APSHELL and you will have to use it to create new AppSets and grant new users access to them.
Regards,
Marcelo

Setting up footer to display only when printing

Hello,
I am trying to figure out if you can display a footer only
when printing and not to be displayed when viewing the help
information.
Let me know if this is possible and if so how to do it.
Thanks!

Sorry we didn't get to you as quickly as you'd like, but we
all have regular jobs...
The content in footers can be conditionalized the same as
regular context. RH provides the default Online and Print condition
tags, but you can add others as you like.
In addition, you can use templates to apply headers and
footers to multiple topics more easily.
See the "Conditional text" section of the RH Help.
Good luck,
Leon

Retrieving POP mail only when I want to ...?

Hi everyone,
I would like the option to retrieve mail from my pop account (non exchange) email account, but only when I want to. So when I'm at home, or in my office, and have access to my mac, I don't want my iPhone to retrieve the email. And leaving it on the server is not convenient either. In my prior phone, a sidekick, I could turn off and on a toggle for whether I wanted the phone to retrieve email from that account or not. Is there a way to do this? I have mobileme, and could use that if that would help. THANKS!

Aye, "Push" mail only applies to accounts that support it, which is, as of now, MobileMe (protocol unknown, looks like a modified version of "ActiveSync"), Exchange "ActiveSync", YahooMail! (IMAP-IDLE).
All other accounts will either download at the fetch interval specfied in your settings, or if you tell them too, manually.
(You can also tell Push capable acounts to Fetch or Manual download as well if you prefer)
If you have a MobileMe account, have you considering just getting the emails forwards to your @me.com address?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Since ios5, i cannot send email from my iPod when in my network, only when 3G

Since ios5, i cannot send email from my ipad when wi-fi but only when 3G

The SMTP server you are using with Wi-Fi would be the outgoing server of your internet service provider... this is likely why that's working.
SMTP servers specific to a ISP would not work on the 3G network. You would probably need another SMTP server. One from your cell provider?

Serv. Desk: Action: send an email only when a value in a field has changed

Hello,
In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
- only in change mode relevant
- only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
- it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
if <old value> <> <new value>
Any ideas or experience on how to implement this without major modifications ?
Thanks
Christian

Hi Christian,
check out my question on SDN.
Email on Status Change
it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
regards,
Jason

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Apply GPO only when logon

Similar Messages

Maybe you are looking for