Applying a role

I've been searching through the javadoc... but haven't found anything yet.
Is there a built-in way of applying a Role to an in-memory view before committing?
I have a role that adds resources and default Role Attributes. I have a workflow where the caller selects the role in one manual action (form), and then it transitions to another manual action (form) linked to the user view where I would like the default Role Attribute values to be populated for the user (and editable) before the view is committed and the user is provisioned.
I have done this manually for one attribute by opening up the role and navigating through the object to get the default values, but it is a lot of code and iterating. There must be a method I can invoke to process/expand the role into my view :)
-Rob

nm... got it...
refreshView
-Rob

Similar Messages

After applying SP15 Roles Tab doesn't work

Hi,
I just finished an EP 6.0 6.40 installation and applied SP15, and I am facing a problem. when I click on roles I get an IE error which is : Inernet explorer cannot open the site http://hostname:50000/irj/portal. I checked the other postings and people say they resolved this problem with SP15. Any idea?
Thanks,
Serkan

Serkan,
You upgraded from SP09 to SP15? NW2004s merges Roles into an Identity management tab/content. I'll check for you if there is a fix. Can you actually post the error message and find out if there is a specific entry on default.trc?
Thanks.
James

What are the roles need to add for webservice user in SAP ECC 6.0

Dear SDNS,
Can you please help me to understand , what are the roles needed to add while creating a webservice user in ABAP STACK.
Really appreciate your immediate help and response.
Thanks and Regards.
Suraj

Hi Suraj,
Please refer to this link & apply the role/s as per the requirements for the web service user:
[http://help.sap.com/saphelp_nwpi71/helpdata/en/2b/07074155bcf26fe10000000a1550b0/content.htm]
Best Regards, Trevor

Setting up a Role to Restrict SQVI by user (on field BUKRS table KNC3)

Hi Everyone!
I am trying to get my basis team to give me access to SQVI - but they want to restrict the financial data I have access to by company code (9000 in our company). The authorisation checking for SQVI is not straightforward apparently. It depends on the data source of the view created. If it is logical database, then the authorisation follows the access required for the database (e.g. system will check for vendor access if data source is the logical database Vendor Database). But if the source is table or table join, then system will check for table access right, which, in our environment, is unristricted.
So, in essensce, we do not restrict access rights by table and I will be using SQVI to directly query many tables... which will include tables that store data other than info relating to my company code
I have tried applying a role in our Q&A, where in Authorizations (change authorization data) I pass in a variable on the field and table (field name BUKRS '9000' - master table KNC3) for a role assigned to a test user (zSQVI) but this is not restricting the data I can access via SQVI when logged in as zSQVI.
Has anyone had this problem before? Does anyone know how to restrict SQVI access by a field variable using roles?
Kind Regards,
Gavin

It's not possible to restrict SQVI to this level as it doesn't contain authorisation checks at the organisational level. You can achieve this by using Infoset Query / Ad-hoc query where you have the option to apply your own code to the query, thus allowing you to check the company code.

Programatically creating users, roles and insert them into Jazn xml

Hi All,
I am using ADF 11G and ADF BC to develop my application. Whenever a user is created an entry will go into OID and into DB. Admin will apply the roles and users for that roles through application. Once the administrator assigns the roles, the user need to see the appropriate menus based on the roles assigned.
If I use ADFSecurity, then I need to redeploy the application each and everytime an user is created and a role assigned to it. But I have to avoid the redeployment step. When ever admin assigns a role while approving the user, the same should be reflected in Jazn, so that I can use the securityContext to generate menus dynamcally.
Is there a way to do programatically the below:
1. Creating roles
2. Assigining Users
I want to use the functionality of ADFSecurity but programatically.
Any information/links/guidance is much appreciated.
Thanks,
Morgan.

Morgan,
You can configure WLS to use OID instead of jaxn.xml file.
[url http://download.oracle.com/docs/cd/E14571_01/core.1111/e10043/toc.htm]The security guide should be good reading for you.
Best,
John

Apply process restarting

We are running bi-directional streams and we started to see the following errors in the alert log:
Fri Oct 5 11:59:27 2007
A001: apply user roles have changed
Streams Apply Server P001 pid=26 OS id=601 stopped
Streams Apply Reader P000 pid=25 OS id=599 stopped
Streams Apply Server P001 pid=26 OS id=601 stopped
Streams Apply Server P000 pid=25 OS id=599 stopped
Fri Oct 5 11:59:29 2007
Streams APPLY A001 started with pid=144, OS id=13431
Has anyone seen this type of message before?
I am concerned that the apply processes may stop and not restart.
Thanks in advance.

this just shows the status of an apply process. You need to find the reason why the apply process stoped. For that you can query the dab_apply_errors view and find out the reason, based on that you can take the action.
Kapil.

Role based access controle

We tried to apply new roles definition to AP module.
For example, we defined a role which allowed to see the suppliers created by the owner.
It seems that the role definition have any effects on AP module.
We successfuly created roles undo FND and CES.
1- Is it true to say that the role feature does not cover all EBS module?
2- On which modules the role have an effect?
Regards
JC

I do not believe Oracle publishes which modules are (or are not) RBAC aware - for the modules that your are using or are interested in, you will have to read thru the Implementation and User Guides to see if the modules use RBAC.
HTH
Srini

Applying FDM security at group level

Hi Folks
Does anyone know if there is a way in 11.1.1.3 to apply FDM roles at a group level in FDM? I can apply the roles in Shared Services, but when I go into FDM User Maintenance it appears that the roles have to be applied at an individual user level for usernames to appear. Is there a way around this?

It is something that I & others have mentioned at the CAB meetings. We will continue to push for it.

Assign roles to SSO integrated users

Hello everyone,
I'm trying to assign roles to SSO users but I can't. I achieved it with local and LDAP users, but not for SSO users (I want to use my AD users but without LDAP config)
My platform is vCenter 5.5 U1 for SSO, vCAC appliance + IaaS server, and vCAD appliance. When you register your vCAD with vCAC you can use SSO integrated authentication of vCAC. But, how can I assign roles to SSO users?
I can access to vCAD with AD users through SSO integrated authentication but all options are read-only.
Best regards,
Jose Luis Gomez

Hello everyone,
Auto-response.
When you've registered your vCAD with vCAC, new roles appears in vCAC. This roles are:
Application Architect
Application Catalog Administrator
Application Cloud Administrator
Application Publisher And Deployer
Application System Administrator
You can apply this roles to users or groups but always from vCAC --> Administration --> Groups/Users
Best regards,
Jose Luis Gomez

SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed

Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
Voon

Thank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :)

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

File deployment error

Hi
As we are deploying a CRE application, the application is deployed successfully but it throws some warning. There are two application on one of the servers. I guess this might be because of the application on same server causing intervention between the connection of the libaries. Can you please suggest what can be done in this scenario.
Thanks in advance.
09/09/01 17:37:49 - ***********************************************************
09/09/01 17:37:49 - Applying user role management mappings.
09/09/01 17:37:49 - Start updating EAR-file...
09/09/01 17:37:51 - Temp files deleted...
09/09/01 17:37:51 - Ear-file updated successfully for 2118ms.
09/09/01 17:37:52 - References from loader cre to its loaders were made!
09/09/01 17:37:52 - Start to load additional library library:servlet ...
09/09/01 17:37:52 - Library jar-file(s) deployed to server successfully!
09/09/01 17:37:52 - Start to load additional library library:sap:jco ...
09/09/01 17:37:53 - Library jar-file(s) deployed to server successfully!
09/09/01 17:37:53 - Start deploying ...
09/09/01 17:37:55 - Ear-file uploaded to server for 2004ms.
09/09/01 17:38:13 - Successfuly deployed! Deployment took 17504ms.
09/09/01 17:38:13 - WARNING : Deploy service return folowing WARNINGs:
Error can't load Servlet com.***.cre.ServiceInitiator : java.lang.ClassCastException: com.******.cre.ServiceInitiator
+Error can't load Servlet com.****.cre.framework.servlet.EGfsActionServlet : java.lang.ClassCastException: com.***.cre.framework.servlet.EGfsActionServlet
Deployment took 17504ms.+
09/09/01 17:38:13 - ***********************************************************

The file was linked to different server

Exchange Server 2013 setup / coexistance Exchange 2010

So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.
My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation. Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.
[06/12/2014 20:05:19.0860] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
[06/12/2014 20:05:19.0876] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
[06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
[06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
[06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
[06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
[06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
[06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
[06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
[06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
[06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
[06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
[06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
[06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
[06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
[06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
[06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[06/12/2014 20:05:44.0830] [0] Applying default role selection state
[06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
[06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.

Hi,
Let's try the following resolutions:
1. Check if the discovery SearchMailbox is present on Exchange 2010 when you run the Exchange 2013 Install.
2. Reinstall your Exchange 2013 server:
Open ADSIEDIT, CN=Configuration, DC=your domain ->CN=Services ->CN=Microsoft Exchange ->CN=First Organization ->CN=Administrative Groups ->Cn=Exchange Administrative Group ->CN=Servers ->CN=Server name
After remove the exchange server, please reinstall your exchange server to test the result.
Thanks,
Angela Shi
TechNet Community Support

Exchange server 2013 Installation issue

Dear Experts,
Thanks in advance...
I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
Dell Laptop Intel I5 1.7 GHZ
RAM -8GB
Vmware workstation 9.
Steps I followed
Created a VM inside Vmware and Installed windows 2012 Std. Edition
Memory assigned to VM is 1 GB
All prerequisites completed and tried to Install Exchange server 2013 SP1
During installation it asked me to select the role to Install and I selected Mailbox server role and CAS
Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error setup could not completed .
Please find the logs for your reference.............
04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
[04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
[04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
[04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
[04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
[04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
[04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
[04/13/2015 08:41:13.0567] [0] Starting file's copying...
[04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
[04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
[04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
[04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
[04/13/2015 08:42:55.0484] [0] File's copying finished.
[04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
[04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
[04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
See the Exchange setup log for more information on this error.
[04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
[04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
[04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.'.
[04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
[04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
[04/13/2015 08:43:32.0739] [0] The following roles are installed:
[04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
[04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
[04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
[04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
[04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
[04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
[04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0536] [0] Applying default role selection state
[04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
[04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
[04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
[04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
[04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
[04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
[04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
[04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
[04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
[04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
[04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
[04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
[04/13/2015 08:46:30.0221] [0] Finished loading screen
Regards
Biswajeet

Hi,
Please find the DC Health check report.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = EX-13
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Connectivity
         ......................... EX-13 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Advertising
         ......................... EX-13 passed test Advertising
      Starting test: FrsEvent
         ......................... EX-13 passed test FrsEvent
      Starting test: DFSREvent
         ......................... EX-13 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... EX-13 passed test SysVolCheck
      Starting test: KccEvent
         ......................... EX-13 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... EX-13 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... EX-13 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... EX-13 passed test NCSecDesc
      Starting test: NetLogons
         ......................... EX-13 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... EX-13 passed test ObjectsReplicated
      Starting test: Replications
         ......................... EX-13 passed test Replications
      Starting test: RidManager
         ......................... EX-13 passed test RidManager
      Starting test: Services
         ......................... EX-13 passed test Services
      Starting test: SystemLog
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:37
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:49
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:02:02
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         ......................... EX-13 failed test SystemLog
      Starting test: VerifyReferences
         ......................... EX-13 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : NETMAGIC
      Starting test: CheckSDRefDom
         ......................... NETMAGIC passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... NETMAGIC passed test CrossRefValidation
   Running enterprise tests on : NETMAGIC.IN
      Starting test: LocatorCheck
         ......................... NETMAGIC.IN passed test LocatorCheck
      Starting test: Intersite
         ......................... NETMAGIC.IN passed test Intersite
Regards
Biswajeet

Exception in servermgr_accounts when creating open directory master...

Just to give you some background, I'm new to Mac Os X Server. And I'm trying to get a mail/ical/web-server with "open directory" setup. The server is placed in a remote location, behind a NAT-firewall.
I thought I hade everything setup, took a while to figure out the DNS-configs. But I managed to get everything working, and apply the server through a NetworkAccountServer on a client.
When I wanted to setup some e-mail aliases for my e-mail accounts, I remembered I hade seen that in "Server Preferences".
But when opening "Server Preferences" i got the following message:
"Multiple errors occurred on the server while processing commands. Use the Console application to view the error messages.", I could access everything accept Users and Groups, when clicking these it tried to create a new open directory.
The Console App shows this Message:
2/4/11 1:15:31 AM servermgrd[3725] servermgr_accounts: noteDirectoryNodeAdded (reopening nodes)
2/4/11 1:15:31 AM servermgrd[3725] * Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[<NSCFDictionary 0x102021680> valueForUndefinedKey:]: this class is not key value coding-compliant for the key VR.'
* Call stack at first throw:
0 CoreFoundation 0x00007fff878fc7b4 __exceptionPreprocess + 180
1 libobjc.A.dylib 0x00007fff890ce0f3 objcexceptionthrow + 45
2 CoreFoundation 0x00007fff87954969 -[NSException raise] + 9
3 Foundation 0x00007fff87e61c92 -[NSObject(NSKeyValueCoding) valueForUndefinedKey:] + 245
4 Foundation 0x00007fff87d915a8 -[NSObject(NSKeyValueCoding) valueForKey:] + 420
5 Foundation 0x00007fff87d8d0f6 -[NSDictionary(NSKeyValueCoding) valueForKey:] + 173
6 servermgr_accounts 0x00000001005799c1 scDynamicStoreNotificationCallback + 25876
7 servermgr_accounts 0x0000000100579948 scDynamicStoreNotificationCallback + 25755
8 servermgr_accounts 0x0000000100577648 scDynamicStoreNotificationCallback + 16795
9 servermgr_accounts 0x0000000100573521 scDynamicStoreNotificationCallback + 116
10 SystemConfiguration 0x00007fff82273dad rlsPerform + 115
11 CoreFoundation 0x00007fff87899401 __CFRunLoopDoSources0 + 1361
12 CoreFoundation 0x00007fff878975f9 __CFRunLoopRun + 873
13 CoreFoundation 0x00007fff87896dbf CFRunLoopRunSpecific + 575
14 Foundation 0x00007fff87dc08e4 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 270
15 Foundation 0x00007fff87dc07c3 -[NSRunLoop(NSRunLoop) run] + 77
16 servermgrd 0x0000000100003f13 0x0 + 4294983443
17 servermgrd 0x0000000100001388 0x0 + 4294972296
18 ??? 0x0000000000000002 0x0 + 2
2/4/11 1:15:31 AM com.apple.launchd[1] (com.apple.servermgrd[3725]) Job appears to have crashed: Abort trap
2/4/11 1:15:31 AM com.apple.ReportCrash.Root[3831] 2011-02-04 01:15:31.997 ReportCrash[3831:2a03] Saved crash report for servermgrd[3725] version ??? (???) to /Library/Logs/DiagnosticReports/servermgrd2011-02-04-011531localhost.crash
2/4/11 1:15:32 AM edu.mit.Kerberos.kadmind[3848] kadmind: starting...
2/4/11 1:15:33 AM Server Admin[1931] Error '-1' when applying directory role change
2/4/11 1:15:34 AM com.apple.launchd[1] (edu.mit.Kerberos.kadmind[3848]) Exited with exit code: 2
2/4/11 1:15:34 AM com.apple.launchd[1] (edu.mit.Kerberos.kadmind) Throttling respawn: Will start in 9 seconds
2/4/11 1:15:34 AM com.apple.launchd[1] (edu.mit.Kerberos.krb5kdc) Throttling respawn: Will start in 9 seconds
2/4/11 1:15:43 AM edu.mit.Kerberos.kadmind[3951] kadmind: starting...
2/4/11 1:15:51 AM com.apple.launchd[1] (com.apple.suhelperd[4009]) Exited with exit code: 2
I tried reseting the "Open Directory Service" in "Server Admin", by setting it to "standalone directory".
It did stop the "Open directory", but the console was again showing the message above.
With the server in stand-alone mode, I could access "Server Preferences" again, but as soon as I create an "Open Directory again", it fails with the above error, and I cant access the Open Directory from Server Preferences.
To summarize, the message shows when:
1. Creating an Open Directory Master.
2. Removing a Open Directory Master.
3. Entering Server Preferences with Open Directory Master running.
A wierd thing is that the "Open directory" seems to be fine. I can manage it in "Workgroup manager", login to webmail, calenders, VPN etc. I just can't manage it from "Server Preferences".
I did make som misstakes in the beginning (primarly not setting a proper host-name before creating the first "Open Directory", and also having a local-user with the same short-name as a user in the "Open Directory") But that should all solved now.
Any Idea's on what could be wrong?
Where else can I set e-mail aliases for my "Open Directory" users? Is it possible for them to administer aliases themselves?
Thanks in advance!
PS. Anyone have any tips on mail-forwarding to multiple external accounts? Do I really need to edit this manually in /etc/postfix/aliases? Is there anyway I can let my users administer forwarding?

If anyone else has similar issues, I didn't find a solution. Re-installed the server from scratch...

Applying a role

Similar Messages

Maybe you are looking for