Applying tabs to whole document

I copied sme text from a web page & was re-aligning it. There were about 10 tabs in the layout (blue triangles on the ruler at the top). I can delete them by dragging the off (puff of smoke - nice touch!) or via text inspector, but it only seems to disappear for that line. How can I make it apply to the whole document?
Thanks

Highlight the whole document before you do it.
Or...
Change the style that applies to the changed paragraph, and then reapply that one to the whole document in the Styles drawer.

Similar Messages

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

Microsoft word 2004 changes whole document instead of just selected text

I'm using MacBook Pro 10.5.8. I'm having trouble with microsoft 2004. When I select text from a portion of the document (like a paragraph) to change its property (like make it bold, or shift a block of text over by a tab), the whole document (everythiing else that i did not select) moves. This can happen to 200 pages! It's driving me nuts. It's also doing it to new documents. I have thrown away my preferences file: preferences/com.microsof.Word.plist; and restarted my computer but it keeps happening. I'm trying to finish a huge writing project with deadlines at the end of the week and it's making it really difficult to work. Anyone have any ideas that might help me? Thanks so much!

muphi wrote:
the text in the entire document is turning bold
That's a different matter. And it's not what you said in your OP, so you better make sure that is the actual problem.
I hesitate to ask this, but have you used a single Style throughout the document?
If yes, check its automatic update setting. Click inside the text, go to Format > Style > Modify and check if the "Automatically update" option is enabled. (I'm not using Word 2004, so these may not be exactly as described.)
If no, then probably the document is corrupt.
(Note that this is based on your description -- it that's not accurate, then neither is my answer.)

Applying Tax code on document total as a whole.

will it be possible to apply tax on a document total as a whole?
for eg.
I want to generate a purchase order for 3 items and doesn't want to apply tax code on line level.
The document total will be say 5000 now i want to put tax code on this value.
will it be possible.

Hi,
In SAP B1, You should link the Tax codes in row level (ie., for every item it's tax code should be defined in that row itself). We cannot define or calculate the tax amount for overall amount.
Raja.S

Applying the ruler to the whole document?

I am having trouble with the ruler in pages. I can manually adjust the rulers on each page but want to apply the same guidelines to the whole document?
I have gone to preferences > rulers and tried to figure out but I am at a loss?
Can any one help????

The Ruler applies to selected text. Always has in every software I have known.
If it didn't you wouldn't be able to make individual adjustments.
If you want it to apply to all the text in your document at this time:
click in your text, Menu > Edit > Select All
or
command a
and make your adjustments.
Peter

How do you get rid of default tabs on a document in pages 09?I h

Hi.
I am wanting just one tab on my document, but there are many popping up that I believe are default tabs. I am trying to delete them in inspector but it is not letting me. Any tips???
Thanks!

Select the text you want to apply your tab to and set the tab on the ruler by clicking on it.
In the absence of any specified tabs the tabs will jump to set intervals on the ruler.
Peter

How do I change font in the whole document at the same time?

How do I change font in the whole document at the same time?

Menu > View > Show Styles Drawer
Menu > Help > Pages User Guide
Download and read page 27 on creating and using Styles, which is done largely by example ie you make the text what you want then save it as a Style to be applied wherever you want in the document from the Styles Drawer.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=180&mforum=iworktips ntrick
Peter

How can I insert a line that extends from a word without it affecting the formatting of the WHOLE document?

I am trying to create a simple form for people to print out and fill in. I want fields like 'Name' with a line extending from the word for people to write on. What should be the simplest of tasks has confounded me for HOURS. Inserting a line as a 'shape' or 'drawing with pen' just messes up the formatting of the whole document. I've used Pages 'Help' but it almost forced me to staple my eyelids to the carpet. Surely there is a SIMPLE way to do this. I even tried 'tricking' Pages by 'underlining' a row of spaces. It won't even allow you to do this because Pages is far more clever than a human.
My cat is looking at me with increasing consternation.

I would use a right-aligned tab with an underline leader.

How to By-Pass Preview in Image Capture and Scan whole document right away

Does anyone know how to by-pass the Preview mode in Image Capture? And ideally have it scan and save to desktop automatically??
What happens is I scan a document from the printer. It performs a preview. The rectangles it chooses are often wrong, I have to delete them, then do a select box around the whole document, then click Scan.
What I would like is for it to just scan the whole document from first button press, not have to go through this process which includes a double scanning.
Thanks!

If you hide the details pane Image Capture will scan immediately to a specified folder. Other way is to open printers and faxing from the system preferences , select the scanning tab of your printer and click Open scanner. It will start scanning immediately without opening Image Capture. To set other software as default you should open Image Capture, select your printer/scanner and click the scanner buttons. It will then let you chose which program should be launched when you scan a document.

I have OSX Maverick on an iMac using Outlook e-mail. PDF attachments are included in the e-mail as the whole document rather than just the PDF icon. How can i have just the PDF icon as an attachment?

In Outlook my PDF attachments appear as whole documents and not just the PDF icon. How can I have attachments included as PDF icons and not the documents?

For your own viewing, you can of course control-click on the attachment and select "View as Icon".
For others' viewing, it depends upon their email reader. To ensure that attachments are not displayed expicitly you can put them all in a zip file (via control click and "Compress") then attaching them, or you can use third party stuff like Attachment Tamer.
charlie

Open several PDFs in the same Reader window using tabs for each document

How do I open several PDFs in the same Reader window using tabs for each document? I'm using Reader 11.0.03 and Windows 7.

That would be a nice feature! Suggest it at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform - hopefully it will make it into Reader XII.

How do I copy a few lines from a pdf document to a Word document? I'm not looking to convert the whole document, just need to copy a few lines here and there.

How do I copy a few lines from a pdf document to a Word document?
I'm not looking to convert the whole document, just need to copy a few lines here and there.
ps. Wow, what a user UNFRIENDLY site this is!

In most cases you can just select the text and copy/paste. You can do that unless the file is a picture/scan.

How to edit linked text in an Indesign long document without it effecting the whole document

I want to work out how to edit text in indesign without the rest scrolling
I have a large 200 page book. The text was supplied in Word and I have placed the whole document automatically and now I am going through each page doing my magic with pics, stylesheets etc.
When the client comes back with edits, I am concerned that deleted or adding in text will scroll the text to the next chapter, etc etc. This will be a nightmare. Not sure how to unlink say 5 pages or so that are in each chapter so I can edit easily without the whole document being effected.
Apologies I am probably not explaining myself all that well.

lisalip wrote:
john the link is broken
I can see there are scripts but I don't want each page separate rather each chapter (each chapter can go for 2 or 7 pages)
I am only 35 pages or so into the book and if I have to I can re place the text with some work, ie start again with the text pages.
seems sily though that I cannot split the threaded stories a few pages at a time.
The link is now fixed.
You can split the threaded story into separate stories anywhere in the thread. At the chapter breaks seems logical. There are many users who'll assert all sorts of right/wrong at you when it comes to threading text. For my purposes, I set up long documents much the way you propose; threading articles, stories, or chapters discreetly; rarely would I ever thread an entire long document as one. It's a preference, not a rule. Each way has benefits and pitfalls.

How do you add the language of the dictionary in pages for the whole document?

How do you add the language of the dictionary in pages for the whole document. When I add the british language it does not stay ON for the whole document. It goes back to "none"???? I am using pages 09 version 4.1 (923).

This is a feature of Numbers. If you repost on the iWork forum you may get more information.

Script for Word 2008 to set the font for whole document.

I just moved to Office 2008 form 2004 and am shocked to see my Macros do not work! So need to solve it with Aplescript. I spend an hour to find a way of changing the font in a whole document, to no avail.
To select all the text is easy:
tell application "System Events"
tell application "Microsoft Word" to activate
tell process "Microsoft Word" to keystroke "a" using command down
end tell
But how to get it to do the font?
Any tips?

Looks promising:
http://www.macworld.com/reviews/product/671498/review/microsoftword_for_mac2011.html
The bottom line is this: Microsoft Word for Mac no longer feels like a second-string word processing program in the Microsoft Office suite. It is in fact a powerful tool for creating all your personal and business documents and for collaborating with others. More importantly, Word 2011 now makes it possible to insert a Mac into nearly any business environment and offer Mac users the same set of features found in Word for Windows, without compromise.
And regarding Macros:
http://www.macworld.com/article/154785/2010/10/welcomebackvisualbasic.html
In my testing so far, Excel 2011 runs older macros just fine. I opened one macro-laden worksheet I’d created back in 1992 in Excel 2011; it ran perfectly. I also opened a number of Excel 2004 worksheets, all of which used macros to some degree or another, and they also worked as expected.
New macros I’ve recorded so far all worked as expected. The Visual Basic Editor’s work area is mostly identical to that of Excel 2004’s, but with a few nice additions. For instance, the Edit menu features some new options for viewing properties, methods, constants and parameters. In the Debug menu, you can create Watch functions, which allow you to watch an expression and to stop the macro when a value changes or a condition becomes true.
Microsoft’s Excel 2011 team has also worked to make Mac macros compatible with those written for Excel for Windows. According to Microsoft, Excel 2011 for Mac features a full port of the Windows Office VBA environment; in most cases, the OS X and Windows versions of VBA now mirror each other. This includes updating the core VBA engine in Office 2011 to VBA version 6.5, and adding some commands (FormatCurrency, FormatNumber, Replace) that had been disabled in Excel 2004 for the Mac. When there were object-model differences between the Windows and OS X versions, Microsoft says it conformed the Mac version to Office 2010. (Macworld hasn’t had the opportunity to fully test that Windows-compatibility yet.)
Overall, I’ve been quite happy with the macro experience in Excel 2011. Now that Tools -> Macros does something useful once again, I can finally retire Excel 2004.

Applying tabs to whole document

Similar Messages

Maybe you are looking for