AQJMS Exception - Nonemulated Data Sources

In the Application Server Containers for J2EE Services Guide 10g Release 2 (10.1.2) , Cap 4, DataSources, (pg 4-4) the doc shows two notes (plz see below) - one mentions an AQJMS Exception when you use a nonemulated data source and a non-Java-enabled database.
My Question no1: What type of exception is that (oracle.jms.AQjmsException ?) and what's the message (what does getMessage() return ? ) ?
My Question no2: reffers to the second note - for nonemulated ds the physical connections stay open even after a deploy of the app - doesn't this mean that after a set of deploy/undeploys we get the connection pool full of (the unclosed) connections from the very first moment ?
I have an environment with a set of mbds using the same datasource,oc4j 10.1.2.0, on solaris, using the OCI DRIVER, OJMS, with a max no of connections set to 90 and min to 30. I get a AQjmsException: Closed Connection at deploy time, but not constantly - only about 25% of the time.
Nonemulated Data Sources
Nonemulated data sources provide full (nonemulated) JTA services, including
two-phase commit capabilities for global transactions. [...]
Oracle recommends that you use nonemulated data sources for distributed database
communications, recovery, and reliability. Nonemulated data sources share physical
connections for logical connections to the same database for the same user.
Note: You must use a Java-enabled database to run a nonemulated
data source. When you use a nonemulated data source and a
non-Java-enabled database, deploying any MDB application (AQJMS)
generates an exception, thrown to OC4J stdout. If you switch to an
emulated data source or a Java-enabled database, deployment
proceeds correctly.
Note: When an application using a nonemulated data source is
undeployed, the physical database connection is not removed from
OC4J until OC4J is restarted.
Any help much appreciated.
Thx a lot,
Claudiu

Similar Messages

Custom SharePoint 2010 designer page throws "The data source control failed to execute the insert command" exception while adding the new item after the August 13, 2013 CU has installed

We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values)     at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex)     at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
Ramasubbu

Try below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

Using sql bulk copy throwing exception -The given value of type String from the data source cannot be converted to type int of the specified target column

Hi All,
I am reading notepads files and inserting data in sql tables from the notepad-
while performing sql bulk copy on this line it throws exception - "bulkcopy.WriteToServer(dt); -"data type related(mentioned in subject )".
Please go through my logic and tell me what to change to avoid this error -
public void Main()
Dts.TaskResult = (int)ScriptResults.Success;
string[] filePaths = Directory.GetFiles(@"C:\Users\jainruc\Desktop\Sudhanshu\master_db\Archive\test\content_insert\");
for (int k = 0; k < filePaths.Length; k++)
string[] lines = System.IO.File.ReadAllLines(filePaths[k]);
//table name needs to extract after = sign
string[] pathArr = filePaths[0].Split('\\');
string tablename = pathArr[9].Split('.')[0];
DataTable dt = new DataTable(tablename);
|
string[] arrColumns = lines[1].Split(new char[] { '|' });
foreach (string col in arrColumns)
dt.Columns.Add(col);
for (int i = 2; i < lines.Length; i++)
string[] columnsvals = lines[i].Split(new char[] { '|' });
DataRow dr = dt.NewRow();
for (int j = 0; j < columnsvals.Length; j++)
//Console.Write(columnsvals[j]);
if (string.IsNullOrEmpty(columnsvals[j]))
dr[j] = DBNull.Value;
else
dr[j] = columnsvals[j];
dt.Rows.Add(dr);
SqlConnection conn = new SqlConnection();
conn.ConnectionString = "Data Source=UI3DATS009X;" + "Initial Catalog=BHI_CSP_DB;" + "User Id=sa;" + "Password=3pp$erv1ce$4";
conn.Open();
SqlBulkCopy bulkcopy = new SqlBulkCopy(conn);
bulkcopy.DestinationTableName = dt.TableName;
bulkcopy.WriteToServer(dt);
conn.Close();
Issue 1:-
I am reading notepad: getting all column and values in my data table now while inserting for date and time or integer field i need to do explicit conversion how to write for specific column before bulkcopy.WriteToServer(dt);
Issue 2:- Notepad does not contains all columns nor in specific sequence in that case i can add few column ehich i am doing now but the issue is now data table will add my columns + notepad columns and while inserting how to assign in perticular colums?
sudhanshu sharma Do good and cast it into river :)

Hi,
I think you'll have to do an explicit column mapping if they are not in exact sequence in both source and destination.
Have a look at this link:
https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlbulkcopycolumnmapping(v=vs.110).aspx
Good Luck!
Kaur.
Please mark as answer if this resolves your issue.

Exception occurs while creating a new data source using BIRT RCP desighner!

Guys,
Please help me on this !
I have created a pluin project( BIRT ODA API) using elipse and i have placed it in plug-in folder of BIRT RCP Desighner.
When i try create a new data source i am getting the below exception and the jars are available in plugin folders :
org.eclipse.datatools.connectivity.oda.consumer.helper.OdaHelperException: Unable to create the ODA driver's connection factory. (openmrsdb.impl.Driver) ;
java.lang.ClassNotFoundException: openmrsdb.impl.Driver
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.loadDriverInstance(OdaDriver.java:230)
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.init(OdaDriver.java:177)
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.<init>(OdaDriver.java:76)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.getOdaDriverHelper(OdaConnectionWrapper.java:236)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.getOdaConnectionHelper(OdaConnectionWrapper.java:225)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.<init>(OdaConnectionWrapper.java:57)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionFactory.createConnection(OdaConnectionFactory.java:26)
     at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(ConnectionFactoryProvider.java:77)
     at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(ConnectionProfile.java:354)
     at org.eclipse.datatools.connectivity.ui.PingJob.run(PingJob.java:57)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: openmrsdb.impl.Driver
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java:434)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
     at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.loadClass(BundleLoader.java:289)
     at org.eclipse.osgi.framework.internal.core.BundleHost.loadClass(BundleHost.java:227)
     at org.eclipse.osgi.framework.internal.core.AbstractBundle.loadClass(AbstractBundle.java:1269)
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.loadDriverInstance(OdaDriver.java:208)
     ... 10 more
Could you please any one help on this.!
Thanks in advance

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

Error saving Data Source Properties. - Base Exception. Call Oracle Support

Hi,
Oracle Application Server 10g Release 2 (10.1.2).
I tried to create new Datasource using OEM Console but it throws error as following :
Error saving Data Source Properties. - Base Exception: The Entity et="system";ei="0",et="application";ei="138",et="data-sources";ei="146":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: If possible, remove et="system";ei="0",et="application";ei="138",et="data-sources";ei="146":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; . Call Oracle Support.
May I know how to resolve this please ?
Thank you.
J.

Hi ,
Write following code in your UDF
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = <your query>;
try{
         channel =LookupService.getChannel(<comm channel name>,< business system>);
         accessor = LookupService.getDataBaseAccessor(channel);
         resultSet = accessor.execute(Query);
         if(!(resultSet.equals(null)))
                   Iterator rows = resultSet.getRows();
                   if (rows.hasNext()) {
                   Map rowMap = (Map)rows.next();
                   <your variable>.add(rowMap.get(<db field name>)+ "");
catch(Exception ex)
      result.addValue(ex.getMessage());
finally
          try
     if (accessor!=null) accessor.close();
          catch(Exception e)
     result.addValue(e.getMessage());
Thanks ,
Suvarna
Pls award pts if it helps .

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Creation of data sources by Ant

Hi all
Please help me..
when i create data source by ant(copying data-sources.xml already stored in my hard disk with all valid entries.)and then deploy my EAR file and get the following error:
10g-deploy:
[exec] ADMN-300075
[exec] Nested exception
[exec] Resolution:
[exec] Base Exception:
[exec] javax.naming.NamingException
[exec] Lookup error: javax.naming.AuthenticationException: RMIConnection Disconnected; nested exception is:
[exec] javax.naming.AuthenticationException: RMIConnection Disconnected
[exec] javax.naming.NamingException: Lookup error: javax.naming.AuthenticationException: RMIConnection Disconnected; nested exception is:
[exec] javax.naming.AuthenticationException: RMIConnection Disconnected [Root exception is javax.naming.AuthenticationException: RMIConnection Disconnected]
[exec] at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:168)
[exec] at oracle.ias.sysmgmt.utility.Oc4jUtil.getOC4JApplicationServerAdministrator(Unknown Source)
[exec] at oracle.ias.sysmgmt.deployment.j2ee.runtime.RuntimeIf.getOC4JApplicationServerAdministrator(Unknown Source)
[exec] at oracle.ias.sysmgmt.deployment.j2ee.runtime.LocalDeploy.deployOnSingleInstance(Unknown Source)
[exec] at oracle.ias.sysmgmt.deployment.j2ee.runtime.LocalDeploy.doExecute(Unknown Source)
[exec] at oracle.ias.sysmgmt.deployment.j2ee.runtime.RuntimeIf.execute(Unknown Source)
[exec] at oracle.ias.sysmgmt.deployment.j2ee.adapter.DeploymentAdapter.doEvaluateDeploy(Unknown Source)
[exec] at oracle.ias.sysmgmt.deployment.j2ee.adapter.DeploymentAdapter.evaluate(Unknown Source)
[exec] at oracle.ias.sysmgmt.task.TaskMaster.sync_evaluate(Unknown Source)
[exec] at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(Unknown Source)
[exec] at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(Unknown Source)
[exec] at oracle.ias.sysmgmt.task.DaemonWorker.run(Unknown Source)
[exec] Caused by: javax.naming.AuthenticationException: RMIConnection Disconnected
[exec] at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2523)
[exec] at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2339)
[exec] at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1781)
[exec] at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:721)
[exec] at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
[exec] ... 11 more
BUILD SUCCESSFUL
Total time: 4 minutes 58 seconds
But when i crete data source using Oracle enterprise manager,I m able to deploy my EAR file successfully.
Can nebody please tell me how can i create data source manually by ant script ant then deploy my appln. successfully
The entries done by me in data-sources.xml are:
<data-source class="com.evermind.sql.orionCMTDataSource" location="jdbc/los" connection-driver="oracle.jdbc.driver.OracleDriver" username="dbprod_test" password="dbprod_test" url="jdbc:oracle:thin:@//10.0.52.160:1521/orcl" name="jdbc/los"><description>LOSDB</description></data-source
Thanks in advance..

user534925,
Do you want to create a global datasource or one for a specific J2EE application?
For a global datasource, you can use the "admin.jar" file.
Type the following command for more details:
java -jar admin.jar -helpOne of the options is "-installDataSource".
You should be able to launch "admin.jar" from an "ant" script (I think -- I don't use "ant").
Sorry, I don't remember how to set up a datasource for a specific application.
(And I'm too lazy to search for it for you, now :-)
Good Luck,
Avi.

Reporting Services: XML Data Source and Parameters

I’ve created an XML service (asmx) in ASP.Net that I want to use as a data source for an SQL Reporting Services report. The report and service work just fine if I use a Method from the service that does not have parameters. However, if I use a Method that
needs a parameter, the query/report fails. My investigation makes it seem that the parameter is not getting passed to the Method at all. (The parameter is a DateTime and it always ends up uninitialized and the WebMethod throws an exception.)
I’ve exhausted all my TechNet resources and Googled this excessively. It would seem that I am doing this correctly, based on all the examples I’ve seen, but I still can’t get it to work.
I've done a lot of different permutations, but this is where I’m at right now.
(Note: I've changed the Web Method's parameter to be a String instead of a DateTime. I did this as part of my trial-and-error process. Once I get this figured I'll return it to a DateTime.)
I'm trying to include everything here that will help you help me (see attached image). I had to obfuscate a few things (not sure if that is necessary).
See attached image:
Created Shared Data Source in SQL Report Services
Create Report Parameter (matching Web Method parameter)
Created a data set in Report Builder (with Query, and parameter - matching Web Method parameter)
Query in Data Source
<Query>
<Method Name="GetDueDateAging" Namespace="http://zzz.com/vvv">
<Parameters>
<Parameter Name="cutoffDate">
<DefaultValue></DefaultValue>
</Parameter>
</Parameters>
</Method>
<SoapAction>http://zzz.com/vvv/GetDueDateAging</SoapAction>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
This is where I needed the most help, and I don't totally understand it. But again, the parameter-less Method worked. I've tried adding different things in the <DefaultValue> tag (like @cuttoffDate and constant values), with no success.
WebMethod Code
[WebMethod]
public List<AgingInvoice> GetDueDateAging(string cutoffDate)
DateTime cd = DateTime.MinValue;
if (!DateTime.TryParse(cutoffDate, out cd))
cd = DateTime.Now;
Shared.DueDateAging aging = new Shared.DueDateAging();
return aging.GetDueDateAging(cd, Settings.Default.ConnectionString);
I've looked at every online resource that I could find, but I'm striking out right now. Any help or hints would be greatly appreciated.
Thanks.
Derrick

Hi Derrick,
In your case, please refer to the following method to troubleshooting this problem:
We can use Fiddler2 to monitor the HTTP post, and check whether the parameter is being sent. The Fiddler tool can helps us debug web applications by capturing network traffic between the Internet and test computers. If the parameter is being sent, please
debug the web service to ensure the method has values return.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

SSRS CatalogItem method not working for deploying a shared data source

I have been working with the SSRS CreateCatalogItem method to deploy reports to a SSRS 2012 in SharePoint integrated mode with SharePoint Server Enterprise 2013. I am using Powershell. The CreateCatalogItem method works fine when I deploy RDL files,
but fails when I deploy an RDS. I get an rsInvalidXML1400 error, whatever that is. Here is a cut-down version of my code to establish the bare essentials:
    [String] $reportserver = "server20";
    [String] $url = "http://$($reportserver)/sites/AdventureWorks/_vti_bin/reportserver/reportservice2010.asmx?WSDL";
    [String] $SPFolderPath = "http://server20/sites/AdventureWorks/BICenter/Data%20Connections/";
    [String] $fileFolder = "C:\SiteBackups\BIReports\BIReports\";
    [String] $itemName = "AdventureWorksCube.rds";
    $ssrs = New-WebServiceProxy -uri $url -UseDefaultCredential;
    $warnings = $null;
    $itemPath= $($fileFolder + $itemName);
    $definition = get-content $itemPath -encoding byte;
    try
        $ssrs.CreateCatalogItem("DataSource", $itemName, $SPFolderPath,$False,$definition,$null, [ref] $warnings);
    catch [System.Web.Services.Protocols.SoapException]
        $msg = $_.Exception.Detail.InnerText;
        Write-Error $msg;
I have a workaround whereby I read the XML of the data source file directly and extract the ConnectString and Extension elements then use the text within them to create the data source using the DataSourceDefinition class. My point is not to get a workaround.
I want to establish that the CreateCatalogItem method indeed does not work when used with the ItemType "DataSource". In the code above, if I change the itemType i.e. first parameter of CreateCatalogItem to "Report" and change the $itemName
to the name of an RDL file, it deploys correctly. Has anyone else encountered this behavior or am I doing something wrong here?
Charles Kangai, MCT
author of the following Microsoft Business Intelligence courses:
http://www.learningtree.co.uk/courses/139/sql-server-analysis-services-for-business-intelligence/
http://www.learningtree.co.uk/courses/134/sql-server-integration-services-for-business-intelligence/
http://www.learningtree.co.uk/courses/140/sql-server-reporting-services/
http://www.learningtree.co.uk/courses/146/sharepoint-business-intelligence/
Charles Kangai, MCT

Hello,
We can invoke the SSRS proxy endpoint (ReportService2006.asmx)from PowerShell to publish report definitions (.rdl) and report models (.smdl) to a SharePoint library, but this does not apply to data source (.rds) files.
In order to deploy .rds to SharePoint library without using SSDT, you should convert the .rds file to its .rsds counterpart which is pretty contains same content but in different schema.
If you want to fully automate your deployment, you should write your own converter and perform the deployment by utilizing SharePoint feature framework and SSRS proxy endpoint (ReportService2006.asmx).
Please refer to the following blog about this issue:
PowerShell:Deploying SSRS Reports in Integrated Mode
Deploying Reports in Integrated Mode
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

How to create olap cube using Named Query Table in Data source View

I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
Thanks

Hi Pawan,
What do you mean "It Not Working"？ As Kamath said, please post the detail error message, so that we can make further analysis.
In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
view (DSV) with rows and relationships, except that the named query is based on an expression.
Reference:Define Named Queries in a Data Source View (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support

PowerPivot report data refresh error Data source as SharePoint list Data Feed

Hi All,
I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
to report started a manual refresh it was success, after next schedules it failed.
Error massage:
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used:
The network path was not found. ;The network path was not found. The network path was not found. .
A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d',
Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.
Thank you very much !
erkindunya

If you are using Claims Auth then this is a known limitation. Auto refresh only works under Classic Auth.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog |
LinkedIn | Facebook |
Twitter | Quix Utilities for SharePoint |
Codeplex

Powerpivot Data Refresh Not working with Oracle Data Source in sharePoint 2013

I am using SQL Server 2012 PowerPivot for Excel 2010. Getting the following error in SharePoint 2013 environment, when using Oracle data source within a workbook -
EXCEPTION: Microsoft.AnalysisServices.SPAddin.DataRefreshException: Engine error during processing of OLE DB or ODBC error: The specified module could not be found..:
<Site\PPIV workbook>---> Microsoft.AnalysisServices.SPAddin.DataRefreshException: OLE DB or ODBC error:
The specified module could not be found..
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)
at Microsoft.AnalysisServices.SPAddin.DataRefresh.DataRefreshService.ProcessingJob(Object parameters)
I created a simple Excel 2013 PPIV workbook with an oracle data source and uploaded that to SharePoint 2013, but no change in the results - still getting the above error.
What is this error? We have installed Oracle client (64-bit, since we use 64-bit Excel and Sp is also 64-bit) on SSAS PPIV Server and SharePoint Content DB Server. Do we need
to install it anywhere else?
Thanks,
Sonal

Hi Sonal,
To use PowerPivot for SharePoint on SharePoint 2013, it is required to install PowerPivot for SharePoint with the Slipstream version of SQL Server 2012 SP1. If you install SQL Server 2012 and then use the upgrade version of SQL Server 2012 SP1 to upgrade,
the environment will not support SharePoint 2013.
I would suggest you refer to the following articles:
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://technet.microsoft.com/en-us/library/jj218795.aspx
Upgrade SQL Server BI Features to SQL Server 2012 SP1:
http://technet.microsoft.com/en-us/library/jj870987.aspx
Regards,
Elvis Long
TechNet Community Support

AQJMS Exception - Nonemulated Data Sources

Similar Messages

Maybe you are looking for