PowerPivot report data refresh error Data source as SharePoint list Data Feed
Hi All,
I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
to report started a manual refresh it was success, after next schedules it failed.
Error massage:
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used:
The network path was not found. ;The network path was not found. The network path was not found. .
A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d',
Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.
Thank you very much !
erkindunya
If you are using Claims Auth then this is a known limitation. Auto refresh only works under Classic Auth.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog |
LinkedIn | Facebook |
Twitter | Quix Utilities for SharePoint |
Codeplex
Similar Messages
-
SSDT - Using a SharePoint list data feed as source - "column does not exist in the rowset" error
Hey guys!
So, I want to use a SharePoint list data to create a cube/tabular model, in order to make a complex analysis in PPS using MDX.
To create the tabular model, I'm using the SS Data Tools, and importing a feed from the respective SharePoint list (using the _vti_bin/listdata.svcextension and then selecting the list(s) I wanna to import).
Everything looks fine and smooth, I can select and preview the data in the table import wizard, but in the end, when importing, I always get this error IF the table has one or more row of data (if the table is empty, it's ok...) - the <...>
column doesn't exist in the rowset.
(Curiously, when I have the same procedure in PowerPivot for Excel, I have no problems, everything works fine. The problem is that then I get again errors if I try to create a tabular model on SSDT importing a PowerPivot file).
Here's the error:
Had you already tried this in SSDT? Are you experiencing the same trouble?
Best regards, and thanks in advance!
Jorge Mateus
Jorge MateusI noticed something else too.
I can't process Tabular Models on both SSDT and SSMS (2012), but I can process Tabular Models created on PowerPivot.
I tried to create a Data Feed connection on PowerPivot, and it was successfully created. However, if restoring the PowerPivot Tabular DB on my SSAS Tabular instance and processing (full) the model through SSMS, it won't work.
Is there anything different on PowerPivot and SSDT related with Partitioning or connections to the data sources?
Regards,
Jorge
Jorge Mateus
Update:
When trying to Restore a PowerPivot file on my SSAS Tabular Server and full process the model:
The operation failed because the source does not contain the requested column. You can fix this problem by updating the column mappings.
More Details:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb' in table 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb'.
The current operation was cancelled because another operation in the transaction failed.
X is the first column of the source table, no matter if I chose others on the PowerPivot table.
When trying to import data from a data feed using SSDT:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_ee6be81f-2235-4113-b404-cfcb20647a38' in table 'X_ee6be81f-2235-4113-b404-cfcb20647a38'.
The current operation was cancelled because another operation in the transaction failed.
X is the first chosen column to import. -
How to access sharepoint List Data in Power Pivot model
Hi,
I have a sharepoint list and i want to access the list in power pivot workbook.
I tryed exporting the list as datafeed but iam that is missing under export.
Iam stuck pls help any other approach.?
Regards,
KrishnaaHello,
I have answered this question in this thread below:
http://social.technet.microsoft.com/Forums/office/en-US/92a04e1b-a5f7-4dbe-88e7-0a1064622641/sharepoint-list-access-in-power-pivot?forum=sqlkjpowerpointforsharepoint
Please go through the following aticles:
Using SharePoint List Data in PowerPivot:
http://msdn.microsoft.com/en-us/library/hh230322.aspx
Using a SharePoint List as a data source:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/07/11/excel-services-using-a-sharepoint-list-as-a-data-source.aspx
Regards,
Elvis Long
TechNet Community Support -
Build XML for Custom Nested Accordian (like Tree View Structure) for SharePoint List Data
Expected output in Xml:
<?xml version="1.0" encoding="utf-8" ?>
- <TopRoot>
- <Root id="1" Name="Department">
- <Type id="2" Name="IT">
- <SubType id="3" Name="Technology">
<SubSubType id="4" Name="Sharepoint" />
<SubSubType id="5" Name="ASP.NET" />
<SubSubType id="6" Name="HTML 5" />
</SubType>
</Type>
</Root>
</TopRoot>
List Details:
list details for storing category / sub category data and code to build tree structure for the same.
1.Create Custom List named “CategoryDetails”:
2.Create Column “Category Name” of type single line of text. Make it as required field and check Yes for Enforce Unique values.
3.Create column “Parent Category” of type lookup. under Additional Column Settings.
Get information dropdown, select “CategoryDetails”.
4.Choice column ["SRTypeName"] 1.Root,2.SRTYPE,3.SubSRTYPE, 4.SUBSUBSRTYPE
In this column dropdown, select “Category Name”:
Referance:
http://www.codeproject.com/Tips/627580/Build-Tree-View-Structure-for-SharePoint-List-Data -fine but don't want tree view just generate xml string
i just follwed above link it work perferfectly fine for building tree view but i don't want server control.
Expected Result:
My ultimate goal is to generate xml string like above format without building tree view.
I want to generate xml using web service and using xml i could convert into nested Tree View Accordian in html.
I developed some code but its not working to generate xml /string.
My modified Code:
public const string DYNAMIC_CAML_QUERY =
"<Where><IsNull><FieldRef Name='{0}' /></IsNull></Where>";
public const string DYNAMIC_CAML_QUERY_GET_CHILD_NODE =
"<Where><Eq><FieldRef Name='{0}' /><Value Type='LookupMulti'>{1}</Value></Eq></Where>";
protected void Page_Load(object sender, EventArgs e)
if (!Page.IsPostBack)
string TreeViewStr= BuildTree();
Literal1.Text = TreeViewStr;
StringBuilder sbRoot= new StringBuilder();
protected string BuildTree()
SPList TasksList;
SPQuery objSPQuery;
StringBuilder Query = new StringBuilder();
SPListItemCollection objItems;
string DisplayColumn = string.Empty;
string Title = string.Empty;
string[] valueArray = null;
try
using (SPSite site = new SPSite(SPContext.Current.Web.Url))
using (SPWeb web = site.OpenWeb())
TasksList = SPContext.Current.Web.Lists["Service"];
if (TasksList != null)
objSPQuery = new SPQuery();
Query.Append(String.Format(DYNAMIC_CAML_QUERY, "Parent_x0020_Service_x0020_Id"));
objSPQuery.Query = Query.ToString();
objItems = TasksList.GetItems(objSPQuery);
if (objItems != null && objItems.Count > 0)
foreach (SPListItem objItem in objItems)
DisplayColumn = Convert.ToString(objItem["Title"]);
Title = Convert.ToString(objItem["Title"]);
int rootId=objItem["ID"].ToString();
sbRoot.Append("<Root id="+rootId+"
Name="+Title+">");
string SRAndSUBSRTpe = CreateTree(Title, valueArray,
null, DisplayColumn, objItem["ID"].ToString());
sbRoot.Append(SRAndSUBSRTpe);
SRType.Clear();//make SRType Empty
strhtml.Clear();
SRType.Append("</Root>");
catch (Exception ex)
throw ex;
return SRType.ToString();
StringBuilder strhtml = new StringBuilder();
private string CreateTree(string RootNode, string[] valueArray,
List<SPListItem> objNodeCollection, string DisplayValue, string KeyValue)
try
strhtml.Appends(GetSRType(KeyValue, valueArray, objNodeCollection);
catch (Exception ex)
throw ex;
return strhtml;
StringBuilder SRType = new StringBuilder();
private string GetSRType(string RootNode,
string[] valueArray, List<SPListItem> objListItemColn)
SPQuery objSPQuery;
SPListItemCollection objItems = null;
List<SPListItem> objNodeListItems = new List<SPListItem>();
objSPQuery = new SPQuery();
string objNodeTitle = string.Empty;
string objLookupColumn = string.Empty;
StringBuilder Query = new StringBuilder();
SPList objTaskList;
SPField spField;
string objKeyColumn;
string SrTypeCategory;
try
objTaskList = SPContext.Current.Web.Lists["Service"];
objLookupColumn = "Parent_x0020_Service_x0020_Id";//objTreeViewControlField.ParentLookup;
Query.Append(String.Format
(DYNAMIC_CAML_QUERY_GET_CHILD_NODE, objLookupColumn, RootNode));
objSPQuery.Query = Query.ToString();
objItems = objTaskList.GetItems(objSPQuery);
foreach (SPListItem objItem in objItems)
objNodeListItems.Add(objItem);
if (objNodeListItems != null && objNodeListItems.Count > 0)
foreach (SPListItem objItem in objNodeListItems)
RootNode = Convert.ToString(objItem["Title"]);
objKeyColumn = Convert.ToString(objItem["ID"]);
objNodeTitle = Convert.ToString(objItem["Title"]);
SrTypeCategory= Convert.ToString(objItem["SRTypeName"]);
if(SrTypeCategory =="SRtYpe")
SRType.Append("<Type id="+objKeyColumn+" Name="+RootNode+ ">");
if (!String.IsNullOrEmpty(objNodeTitle))
SRType.Append(GetSRType(objKeyColumn, valueArray, objListItemColn));
if(SrTypeCategory =="SRSubTYpe")
SRType.Append("<SRSubType id="+objKeyColumn+" Name="+RootNode+
">");
if (!String.IsNullOrEmpty(objNodeTitle))
SRType.Append(GetSRType(objKeyColumn, valueArray, objListItemColn));
if(SrTypeCategory =="SubSubTYpe")
SRType.Append("<SubSubType id="+objKeyColumn+" Name="+RootNode +"
></SubSubType");
SRType.Append("</SubType>");
SRType.Append("</Type>");
catch (Exception ex)
throw ex;
return SRType.ToString();
// Call method again (recursion) to get the child itemsHi,
According to your post, my understanding is that you want to custom action for context menu in "Site Content and Structure" in SharePoint 2010.
In "SiteManager.aspx", SharePoint use MenuItemTemplate class which represent a control that creates an item in a drop-down menu.
For example, to create or delete the ECB menu for a list item in
"Site Content and Structure", we can follow the steps below:
To add the “My Like” menu, we can add the code below:
<SharePoint:MenuItemTemplate
UseShortId=false
id="OLListItemLike"
runat="server"
Text="My Like"
ImageUrl="/_layouts/images/DelItem.gif"
ClientOnClickNavigateUrl="https://www.google.com.hk/"
/>
To remove the “Delete” menu, we can comment the code below:
<SharePoint:MenuItemTemplate
UseShortId=false
id="OLListItemDelete"
runat="server"
Text="<%$Resources:cms,SmtDelete%>"
ImageUrl="/_layouts/images/DelItem.gif"
ClientOnClickScript="%SmtObjectDeleteScript%"
/>
The result is as below:
More information:
MenuItemTemplate Class (Microsoft.SharePoint.WebControls)
MenuItemTemplate.ClientOnClickScript property (Microsoft.SharePoint.WebControls)
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Dynamic chart using SharePoint list data
Is it possible to create dynamic chart from SharePoint List data using OOB.
I have column Status [ choice - Pending , Submitted, Resolved ] . I want to genrate graph[Pie or Bar] show number of items in each status
V JeanThanks Lakshmanan,
But in my environment - chart webpart is not available [ restricted].
Have tried below using script.. Hope might help for other
https://www.nothingbutsharepoint.com/sites/eusp/Pages/finally-dynamic-charting-in-wss-no-code-required.aspx
V Jean -
Data Refresh Error: We cannot locate a server to load the workbook Data Model.
Hello,
Recently I have developed a PowerBI Report using Excel Workbook with external data source. It refreshes successfully for some days and then starts throwing error on every scheduled refresh as "We cannot locate a server to load the workbook Data
Model."
The workaround solution is to restart the application server which has SQL Server Power Pivot Services Installed which will again work for some more days and again start throwing error.
So, I am looking for permanent fix for it.
Following are additional details about our SP Farm:
No. of front end servers: 2, Application servers:2, DB servers 2 with windows fail over cluster.
PowerPivot Server is installed and configured from App 2 server.
Error Log from event viewer:
Unable to load custom data source provider type: Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdDataSourceProvider, Microsoft.PerformancePoint.Scorecards.DataSourceProviders.Standard, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.Type.GetType(String typeName, Boolean throwOnError)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.InitializeCustomDataSourceProviders()
PerformancePoint Services error code 10107.
Thanks,
IbrahimHi ibrahim,
Please try to do the following steps:
1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
http://www.microsoft.com/en-us/download/details.aspx?id=26728
2. In the Application Management section of the Central Administration home page, click Manage service applications.
On the Manage Service Applications page, click the Excel Services service application that you want to configure.
On the Manage Excel Services page, click Data Model.Click Add Server.
In the Server Name box, type the name of the Analysis Services instance that you want to add.
3. Check the thread below:
https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
More information:
https://timpanariuovidiu.wordpress.com/2013/02/14/71/
https://support.microsoft.com/kb/2769345?wa=wsignin1.0
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Error in Source System While Uploading Data from ODS to Data Target
Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
ChakriThis generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG -
Error in the Data Selection - Errors in Source System RSM 340
Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
JohnThere is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be? -
Excel Services with SharePoint List Data in SharePoint 2013 - Chart is not refreshing automatically
Hi Everyone,
This is My req: I m going to display pie chart and Bar chart in share point 2013.
Steps I have follwed:
1. Export the list to excel.
2.Using the Power Pivot table I have done the chart.
3. Uploaded into document Library.
4. Added into the web part.
Chart are displaying. But When ever user added the data into the list chart is refreshing.
Is there any option to refresh the data in chart? Waiting for valuable replies.
Regards, Manoj PrabakarSharePoint lists as data sources in Excel Services is not supported.That's the reason refreshing is not working. There are some work around you can use -
Export as Data Feed - Export your SharePoint list as Data Feed , use this data feed to a PowerPivot for Excel workbook and publish this PowerPivot using Excel Services.
User-defined functions - write UDF in C# and extend the Excel Services functionality to work with SharePoint lists.
https://msdn.microsoft.com/library/bb267252(office.12).aspx#Office2007ExcelServicesUnlimited_SharePointLists
Web Services API -
The Web Services API can be used to push data from a database and then refresh the data in a SharePoint Server list by using Excel Services.
JavaScript Object Model - The JavaScript Object Model for Excel Services in Microsoft SharePoint Server 2010 provides many solutions for Excel Services.
More details -
https://technet.microsoft.com/en-us/library/gg576960.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Unable to connect to SharePoint list data from PowerPivot in Excel
Hi,
I have the PowerPivot excel add-in installed and I can connect successfully to SQL data. I have two SharePoint farms - Farm 1 and Farm 2.
I am able to connect PowerPivot to SharePoint lists in multiple web applications in Farm 1 by using the ListData.svc.
e.g. https://farm1/_vti_bin/ListData.svc/Tasks
In Farm 2 I am unable to connect to SharePoint data. I have tried multiple web applications on Farm 2 and can't connect. I receive the following error. I am able to browse to the address in Internet Explorer and see a feed.
Has anyone else had this error?
Thanks in advance,
Mark
Error Message:
============================
Cannot connect to the specified feed. Verify the connection and try again. Reason: The underlying connection was closed: An unexpected error occurred on a receive..
============================
Call Stack:
============================
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.UpdateDataFeedParameters(ConnectionStringBuilder connBuilder, IDataSource dataSource, Boolean checkFeedValid)
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.GetCurrentConnectionString(Boolean checkFeedValid)
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.ClickTestConnection(Object progressControl)
============================Hi Millard1,
From your descripton, it seems you want to use SharePoint list as a data souce. If so, you should export the SharePoint as data feed in your SharePoint site, and then create a new PowerPivot table that contains the list. Here are some articles for your reference,
please see:
Use Data Feeds (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210625.aspx#sharepointlist
Using a SharePoint list as a data source:
http://powerpivotgeek.com/2010/10/28/using-a-sharepoint-list-as-a-data-source/
Regards,
Bin Long
TechNet Community Support -
Data refresh of Excel file on Sharepoint 2013 Online (E3)
Is it possible to refresh data in an Excel PowerPivot model from external data (SQL Server 2012) on the
SharePoint 2013 Online solution that comes with the Office365 E3 plan?
I need to either have the Excel file itself on the public facing website with data refresh there, or possibly have the Excel file in a private Business Intelligence Center subsite and then publish webparts or whatever on the public site, as long as the charts
are refreshed and publicly viewable. I've found a lot of conflicting info on this.
Re
DCurrently, when a workbook that contains a Data Model is published to a library in Office 365, data refresh is unavailable.
However, you can use a PowerShell script to configure a workaround.
donwload this white paper for workaround:
http://technet.microsoft.com/en-us/library/jj992650.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Filtering sharepoint list data using report parameters
We are using xml to pull data from a custom sharepoint list into sql 2005. We have set a parameter that allows the user to filter the data by surname, however when the user tries to filter the list the drop down box brings up a list of every record, so there are duplicate entries for each surname.
Is there a way of filtering this so that there is only one instance of the users surname instead of it showing all the records?
Any help would be much appreciated.Hi,
Please see the below url
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/c43f25ab-aa3c-4586-85a1-1b89c3b21b12/how-to-filter-a-sharepoint-list-with-report-parameters?forum=sqlreportingservices
Solution is define here.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter -
Unpivot SharePoint list data in SSRS
I need to unpivot data from a sharepoint list to support a report.
the data looks like this
Policy comissiona comissionb comissionc
a 1 2 3
b 4 5 6
i want the result
as
policy comission total
a comission a 1
a comissionb 2
a comissionc 3
b comission a 4
bcomissionb 5
b comissionc 6
ThanksHi Vision2040,
Based on my research, it’s not supported that making Unpivot data from a sharepoint list currently.In general, we can use PIVOT and UNPIVOT relational operators to change a table-valued expression into another table.
For the details, please refer to the link:
http://technet.microsoft.com/en-us/library/ms177410(v=sql.105).aspx
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Export SharePoint List data to SQL Server 2005 Database
Hello Everybody,
I am presently working on a project which handles much larger amount of data. The architecture of the application demands extracting records from the SharePoint (WSS 3.0) and insert into a SQL Server 2005 database. I need to run this job as daily basis. I am thinking of using SSIS (SQL Server Integration Service) for this purpose. But I am new to this technology and I'd like to know how effective this idea to do the job.
I'd also like to know more about SharePoint's ability to handle huge amount of data when it comes to Reporting.
thank you,
ArunFor Reporting Services, There are web parts available which can be used to render a reporting service report in sharepoint. I have also used a reporting service report directly using Page Viewer Web Part so displaying a reporting services report in sharepoint is very simple task. Important part is to transfer data from Sharepoint list to SQL 2005. so if you want to use SSIS package and there is only one or two list then approach is to write a simple query based on your list id and extract information from sharepoint content database from UserData table, since it is a read only operation so it can work this way. Another way to do it is to write a Sharepoint Timer JOB which runs on a defined schedule and will read your list values and will transfer to your SQL 2005, Another way could be to write your custom web service and write code to transfer from list to SQL 2005. Custom code you will write inside timer or web service will be same code so it is just a different shell you can say. in case of web service, use it in some other application as a regular web service.
Let me know if you need further help, You did not mention how many list you have?
Regards,
BizWorld. -
How to retrieve sharepoint list data and show it on excel-addin using C#
Hi,
we have a sharepoint list where all students are present. we wanted to get the data from the list and show it via excel addin (VSTO) (something like save,retrieve buutons) . we have some more business logic which need to be performed before the data is retrieved
. once data is shown on excel , user modifies it and update/save the record back to sharepoint.
can you please give some samples and suggest any links to start with development.
Thanks
chaituHi chaituatp,
For this requirement, I would suggest you to get familiar with how to create VSTO applications, and how SharePoint object model works. Here are some sample code about this:
How to: Retrieve List Items using JavaScript:
http://msdn.microsoft.com/en-us/library/hh185007(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/ee534956(v=office.14).aspx
VSTO application show data in datagridview:
http://stackoverflow.com/questions/16926275/simple-example-of-vsto-excel-using-a-worksheet-as-a-datasource
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support
Maybe you are looking for
-
ITunes 8 *without* QuickTime 7.5.5?
I want to upgrade my iPhone to 2.1 (who doesn't!), so I need iTunes 8 (as I understand it). I don't want to upgrade my QuickTime to 7.5.5 (I'm in the middle of a Final Cut Pro project, and QuickTime updates are rarely forgiving). I've heard that iTun
-
I'm looking for suggestions on how to easily transfer my website to another host as mobileme is going away. Thanks. KelleyH
-
Hi there, I'd like to build an iPhone only app. However, when I select just "iPhone" in DPS App Builder, i receive a message saying that DPS doesnt support iPhone only at this time. I loaded up a test app onto my iPad and it doesnt display the iPhone
-
Mini Bridge in CS6 InDesign won't sort files
I am running CS6 on Snow Leopard. When I open the mini bridge panel in InDesign I can't sort any files in the Nav Pod. It has no effect on the file sort. I have updated the CS software and reset my bridge preferences. Do you have any other suggestion
-
Okay, I have a routine that works perfectly! Until a file is a certain size. I know it works on files that are 4k but not on 10k. What happens is it fetches the first part of the file and then just blocks (which it is supposed to until the file comes