AR Aging Report of overdue Invoices by Customer

hi all ,
can anybody helpme how should i proceed in prepairing the below report
AR Aging Report of overdue Invoices by Customer, By period with ranges .buckets
thanks

Hi,
I think ur requirement is to get the List of Customers payment due dates and with all discounting options, if they will pay in within the tenure.
For this we have a standard report provided by SAP for Customer Evaluation with OI Sorted List.
Report Name: RFDOPR00.
This is enough if ur requirement is the same I mentioned above.
Regards,
Sunil B.

Similar Messages

Aging report for Open Invoice

Hi All,
I need to develop an Aging report for open invoice, there is no indication for open invoice or close invoice since we are using customise DS and DS from third party system. only one key flag we have is clearing date. so kindly let me know how to write the logic for this requirement.. can I use Customer exit for this? I have an Idea to do like
first logic is
*If Clearing date = blank than invoice is = open (by using of this logic we can get all open invoice).
second logic
total number of invoice = current date - document date.
but I do not know how to implement this logic in BEx hnece kinnly advice me whether this logic can be work or suggest with different solution ples..
Regards,

hi,
You can check few default PO reports wid proper paramater in it
or
Can check table EKBE
or
Check PO history in the PO doc
Or
Check the ME80FN
Regards
Priyanka.P

Customer Aging Report Query (without invoices offset by incoming payment)

Hi All Experts,
May I know is there any field from JDT1 mention which invoices is already offset by the Incoming payment or AR Credit note? Because I do not want those invoices that already offset by incoming payment appear at the Customer Aging Report. Meaning, the data appear in the Customer Aging Report is only show those invoices that yet to pay by the customer. Kindly give some advise on it. Thanks a lot.
Thanks and regards,
Angie Ng

Hi David,
Thanks for your suggestion. I have try it, but all of my JDT1.IntrnMatch is in 0 value. Meaning in my situation it is none of any reconcilliation making. But from my SBO window, i manage to see that actually this incoming payment is pay for which invoices. Problem is it is difficult for me to do the possiblity logic that might be happen in my Customer Aging Report Query. Please give some advise that how to show only those invoices yet to pay? The current query will show all the data no matter the invoices or credit memo has been offset.
select OCRD.cardcode 'Supplier Code',OCRD.cardname 'Name',sysdeb 'Debit GBP',syscred 'Credit GBP',
case JDT1.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 30
and (datediff(dd,refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 60
and (datediff(dd,refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "90 + days"
from JDT1,OCRD where JDT1.shortname = OCRD.cardcode and cardtype = 'c' and intrnmatch = '0'
ORDER BY OCRD.CARDCODE, taxdate

Ageing Report for Outstanding Amount from Customer

Dear All,
Kindly let me know if any ageing report available to find the out the outstanding amount for list of customers?
We want to know how many days customers crossed their credit period?
If the customer has 50 days credit, it may be crossed 50 days or still customer may have 20 days. These reports we want from SAP.
Kindly let me know if one available in standard SAP.
Regards,
Mullairaj

Hi,
Not availabe a standard report in sap go through with the help of abaper sa per your requirement.
Regards,
Kanike

Why invoice aging report only display invoice remaining amount?

I setup aging period 0~30, 31~60,61~90,90~9999.
When I submit invoice aging report,Only Remaining Amount Display. The period column-label is null and the value is zero.
Why?

sounds like intented functionality. Are you using the correct version and not an older version of the report?

Aging report - detailed needs invoice project code

Dear All,
Would it be possible for us to have project code (on A/R invoice header) on Aging report - detailed print layout? I found all fields in Aging report - detailed PLD are sys var. Is there a way for us to figure out which sys var is for project code of the invoice? Thanks a lot.
Regards,
Yuka

Unfortunately you can't, you have to recreate it using crystal. In all SAP std reports you only able to show/print what it already shows.

Aging Report-AR

Hi gurus,
Where can i find the AR aging report of overdue invoice by customer?
Thank You,
Graham_s.

Hi,
Please Check the following transaction
S_ALR_87012078       --   Due Date Analysis Report Vendors
S_ALR_87012084/85       --   Vendor Agening Analysis
S_ALR_87012168        --   Due Date Analysis Report Customers
S_ALR_87012175 / 78 -- Customer Agening Analysis
Regards
Rahul

Customer / Vendor Aging Report

Hi,
It´s important to consider the next filter or selection criteria for the reports:
-. Customer and Vendor Aging Reports
Filters:
-. by Sales Employee (Customer Aging)
-. by Buyer (Vendor Aging)
regards

Hello Humberto,
New selection criteria of Sales Employee/Buyer is part of enhancements of Aging Reports in SAP Business One 8.8 release.
When you generate the aging report in v8.8:
u2022 You can group the report by customer or sales employee in the customer receivables aging report, and by vendor or buyer in the vendor liabilities aging report.
u2022 You can specify more flexible time interval. For the time interval Days, 4 new fields are added for you to specify the duration.
u2022 You can hide the Future Remit column on the report by choosing Ignore Future Remit.
u2022 When the aging report has been generated, you can view multicustomer/multivendor detailed information in the aging report window. There is no need to double-click each customer/vendor row to view the details.
Peter Dominik
B1 Solution Management

(Invoice aging report = Cash Requirement Report)

hi,
The total balance for cash requirement report for specific supplier not match with the balance for Invoice aging Report also for specific supplier
The expected behavior:
It must to match the balance between the two reports
(Invoice aging report = Cash Requirement Report)
But this not happen when I compare the balances between the report’s
Kindly , Advise .
Thanks

Hello.
The Invoice Aging Report shows unpaid invoices, which may be not due yet. Use the Cash Requirement Report to forecast your immediate cash needs for invoice payments.
Octavio

SAP Query for AR Aging Report

Hello Gurus-
I am trying to build a query for Aging report, and would like to include something like this:
Customer-Reference-Payment terms-Due date-Current-31-60days-61-90days-91-120days-over120days-toatal amount.
I have an infoset which includes BSID, KNA1, KNB1. I have maintained local fields:
Due Date = Baseline date + cash discount days
Statement Date = My input date.
Current = Condition (DUEDTE >= STATDTE - 30) formula (Amount)
31 - 60 Days = Condition (DUEDTE >= STATDTE - 60 AND DUEDTE < STATDTE - 30) formula (Amount)
61 - 90 Days = similar to above
91 - 120 Days = similar to above
Amount = - 1 * (If Debit credit indicator = "H" then "Amount in local currency") otherwise "Amt in Loc.Cur"
Over 120 Days = similar to above
When I enter a statement date of today it works hunky dory...it all looks good...my current column looks good and do the rest. When i want to run this query as of couple of months ago (if today is 12/19/08 and i wanted to run my aging report for 10/31/08) it should give me aging as of my statement date 10/31/08 but it does not. It calculates the total amount as of today. I know because of local field "Amount" where i gave amount in local currency, but how would I tell that it should pick up amount in local currency till the statement date?
Any input in this regards is highly helpful.
Thanks,
RNarayan

Hi Ram,
On your aging report you want to see invoices which are still not paid (or still open) as of a certain date. This date is "key date". You need to define a variable for key date (which is normally system date if you run today) but it could be a past date.
So key date is let us say Oct 31st (X) and the system date is Dec 19th. When you run the report as of Oct 31st all invoices that are posted prior to Oct 31st (posting date less than X) and are still in BSID will show on your report. There is no issue here.
Let us say an invoice was created on Oct 25th (Y) and was paid on Nov 15th (Z). The clearing date is Z. That means if you run the aging report today this invoice will not show.
But you want to run the report on Oct 31st. This means X is greater than Y but is less than Z.
Clearing date and posting date are part of BSAD. Report run date is the user input and is a variable.
With the above concept and with the help of an ABAP programmer you should be able to solve the problem.
Regards
Sharabh

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

Detailed Aging Report from SAP B1 v2007A

Hello all,
I have SAP Business One v 2007 A in my company. The auditors are coming in next week and I was trying to get the Aging report for both vendor and customer. The default summary looks good. To get the details, I have to go into each customer/vendor and collect them. Is there a way to get all the details in one shot (like an executing an SQL)?
Thank you all so much.
Manoj.

Hello Manoj - maybe try this since it uses the actual General Journal entries found in the JDT1 table. PS - I have no idea why it does not show the NOT EQUAL characters of < and > in the last CASE. The CASE calculation should be the same in all instances - make sure you add that before running. I used the appropriate coding for the SQL - something about SAP forums!!!
For Vendors, just change the CardType to S in the WHERE clause, the Transtype, and change the column headings to what you want them to say.
Hope this helps...
Regards - Zal
--F-BP AR Aging Report Detail Ver 1 ZP 2011 04 16
--DESCRIPTION: SQL uses General Ledger Detail to create an Aging Report which shows
actual invoices, credit memos, and payments by reference date in the JDT1 table.
--AUTHOR(s):
--Version 1 Zal Parchem 16 April 2011
SELECT
T1.CardCode AS 'Cust Num',
T1.CardName AS 'Cust Name',
T0.SysDeb AS 'Debit Amt',
T0.SysCred * -1 AS 'Credit Amt',
CASE
WHEN T0.TransType = 13 THEN 'AR Invoice'
WHEN T0.TransType = 14 THEN 'AR Cred Memo'
WHEN T0.TransType = 24 THEN 'Payment'
ELSE 'Other'
END AS 'Trans Type',
T0.Ref1 AS 'Reference',
FcCurrency AS 'Currency',
CONVERT(VARCHAR(10), RefDate, 103) 'Posting Date',
CONVERT(VARCHAR(10), DueDate, 103) 'Due Date',
CONVERT(VARCHAR(10), TaxDate, 103) 'Doc Date' ,
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 31 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '0-30 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 30
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 61 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '31 to 60 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 60
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 91 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '61 to 90 days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 90
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 121 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '90 to 120 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 120
THEN
CASE
WHEN SysCred != 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '120 Plus Days'
FROM JDT1 T0
INNER JOIN OCRD T1
ON T0.ShortName = T1.CardCode
AND T1.CardType = 'C'
WHERE
T0.IntrnMatch = '0'
AND T0.BalDueDeb != T0.BalDueCred
ORDER BY
T1.CardCode,
T0.TaxDate
FOR BROWSE

Vendor aging report logic

hi
any one can tell me the process of Vendor ageing report
thanks in advance

Hi,
Vendor / Customer aging report logic based on payment terms & Base Line Date (BSIK-ZFBDT)
Standard T.Code Vendot OI shortlist Ex:S ALR87012085
Refer: http://wiki.sdn.sap.com/wiki/display/Snippets/VendorAgeingReport
Regards
Viswa

BP Balance not showing correctly in Aging report

Good Day all B1 experts,
We are converting to SAP B1 for fiscal year 2010 and earlier today I have found a problem with BP balance on the AR side. Below is a summary of the problem:
Problem:
- For some BP, after I entered opening balances, their total outstanding AR balance was not reflected in the Aging report, nor can be found in the Opening Balance window (under System Initialization).
- However, A/R control General Ledger account is correct and ties to my Year End 2009 Financial Statements
Attempted Solution:
- I reentered the "missing" opening balance for those BP accounts. After entering the numbers, however, the Aging report shows a DOUBLED amount of the correct balance. And when I go check the Opening Balance window, the system is showing the correct BP balance (NOT Doubled).
- Now my A/R control General Ledger and Opening Balance General Ledger Account is out of balance as well. The difference equals to the amount I reentered.
Has anyone encountered similar problem before? I cannot think of anything I did to cause such mess. In any case, I am wondering if I need to use the Restore BP function.
Please provide me some guidance on this. Thanks!!!
BR,
Sunny

Good Morning Kerstin,
Thank you for the article. The version that we are using is 2007A (8.00.180) SP:00 PL:45
In the article, it mentioned about the Single Reconciliation Engine. Do you know if that tool comes along with previous upgrades, or we will have to download and install it?
Actually it seems for one of those problem BP accounts, the correct balance is reflecting on the Aging Report after an invoice was issued yesterday. However, its BP balance is still not correctly reflecting elsewhere (such as Incoming Payment under banking module.)
Regards,
Sunny

Overdue amount in Customer Receivable Aging report

Hi all!
Got a question.
In customer receivable aging report SAP Business One displays the relevant open receivables in columns representing the specifications you made in the Interval field in the selection criteria window. But how does it counts them? I've tried to pick all total from invoices,where between doc date and aging date 30 days passed. But it displays incorrect values. Is there any specific query for that?
Please see screenshot attached for the values i need.

Hi,
Try with below query.But your selection criteria for date should be week.
declare @Cust as nvarchar(20)
Declare @FromDate Datetime
Declare @ToDate Datetime
declare @Group as nvarchar(20)
set @cust = (select max(t0.cardcode) from OINV t0 where t0.cardcode = '[%0]')
Set @FromDate = (Select min(t0.Docdate) from dbo.OINV t0 where t0.Docdate >='[%1]')
Set @ToDate = (Select max(t0.Docdate) from dbo.OINV t0 where t0.Docdate <='[%2]')
set @group = (select max(t2.groupname) from OCRG t2 where t2.groupname = '[%3]')
SELECT [CustName] as CustName, [G] as CustGroup,[1] as W1, [2] as W2, [3] as W3, [4] as W4, [5] as W5, [6] as W6, [7] as W7, [8] as W8, [9] as W9, [10] as W10, [11] as W11, [12] as W12, [13] as W13, [14] as W14, [15] as W15, [16] as W16, [17] as W17, [18] as W18, [19] as W19, [20] as W20, [21] as W21, [22] as W22, [23] as W23, [24] as W24, [25] as W25, [26] as W26, [27] as W27, [28] as W28, [29] as W29, [30] as W30 , [31] as W31, [32] as W32, [33] as W33, [34] as W34, [35] as W35, [36] as W36, [37] as W37, [38] as W38, [39] as W39, [40] as W40, [41] as W41, [42] as W42, [43] as W43, [44] as W44, [45] as W45, [46] as W46, [47] asW47, [48] as W48, [49] as W49, [50] as W50, [51] as W51, [52] as W52
from
(SELECT T0.[CardName] as CustName, sum(T0.[DocTotal]) as Total, datepart(ww,T0.[DocDate]) as week, t2.groupname as G FROM OINV T0 left JOIN OCRD T1 ON T0.CardCode = T1.CardCode left JOIN OCRG T2 ON T1.GroupCode = T2.GroupCode WHERE year(T0.[DocDate]) = 2013 and T0.[CardCode] = @Cust and T0.[DocStatus] ='o' and T0.[DocDate] between @fromdate and @todate and t2.groupname = @group GROUP BY T0.[CardName],T0.[DocDate],t2.groupname
union all
(SELECT T0.[CardName] as CustName, -sum(T0.[DocTotal]) as Total, datepart(ww,T0.[DocDate]) as week,t2.groupname as G from ORIN T0 left JOIN OCRD T1 ON T0.CardCode = T1.CardCode left JOIN OCRG T2 ON T1.GroupCode = T2.GroupCode WHERE year(T0.[DocDate]) = 2013 and T0.[CardCode] = @Cust and T0.[DocStatus] ='o' and T0.[DocDate] between @fromdate and @todate and t2.groupname = @group GROUP BY T0.[CardName],T0.[DocDate],t2.groupname )) S
Pivot
(sum(S.total) For WEEK IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12], [13], [14],[15],[16],[17],[18],[19],[20],[21], [22], [23], [24], [25], [26], [27], [28],[29], [30], [31], [32],[33],[34],[35],[36],[37],[38],[39],[40], [41],[42],[43],[44],[45],[46],[47],[48],[49],[50],[51],[52])) P
Thanks & Regards,
Nagarajan

AR Aging Report of overdue Invoices by Customer

Similar Messages

Maybe you are looking for