Arch boot stops on systemd-fsck
Today I upgraded my packages then I replaced catalyst package with catalyst-total after reboot the booting process stops on this line
Systemd-fsck[362]: /dev/sda5: clean etc
The sda5 is my home drive the boot stops after this line
I pressed alt+f2 to switch in CLI mode then I removed catalyst-total and installed catalyst but the booting process still stops Even when I run startx in CLI mode it gives
Unable to connect x server
The xorg log file error is
DRM report mode setting isn't supported
Unload module radeon
Devices detected but none match those in config file
Not using catalyst myself, so I'm not sure about this. But to me it looks like a conflict w/ either the radeon module or KMS. The wiki has information about this: https://wiki.archlinux.org/index.php/AM … le_at_boot
See "disable KMS" and "blacklist radeon", have you done these? Edit: Maybe recheck...
Regards
Edit2: Also maybe check whether something else is failing, either remove "quiet" from kernel parameters or check via systemctl (see systemd wiki for more information).
Last edited by rebootl (2014-05-19 22:41:15)
Similar Messages
-
Upgraded groub to groub2. Would like default arch boot and 1 systemd
I've upgraded to grub2. How or what should I change in /etc/grub.d/
I would like to keep the arch boot entrees. But add one to use systemd as well.
Not sure how I can accomplish this.Hi,
first create your boot config. Afterwards, copy the linux entry and add init=... to the kernel line. As a last step, add the entry to /etc/grub.d/40_custom so it will be included automatically when regenerating the config.
If you mainly use systemd, you could also discard the default entries. (add init=... to GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub) When you want to boot without systemd edit the entry in the bootmenu and remove the init-parameter.
Last edited by progandy (2012-07-26 03:54:03) -
systemd-fsck show message when boot evertime. What does meaning? And how to hidding them.
systemd-fsck[145]: /dev/sda4: clean, 112977/9296096 files, 185427/21217024 blocks
systemd-fsck[151]: /dev/sda1: clean, 345/26104 files, 34083/104388 blocks (check after next mount)
edit:
Sorry, I loss something. Full message is:
/dev/sda3: clean, 131838/991232 files, 1193255/3933482 blocks
systemd-fsck[145]: /dev/sda4: clean, 2977/296096 files, 85427/1217024 blocks
systemd-fsck[151]: /dev/sda1: clean, 345/26104 files, 34083/104388 blocks (check after next mount)
my lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 102M 0 part /boot
├─sda2 8:2 0 258.9M 0 part [SWAP]
├─sda3 8:3 0 15G 0 part /
└─sda4 8:4 0 4.7G 0 part /home
Last edited by eshizhan (2012-10-22 04:52:13)fsck stands for "file system check" [1]. systemd will check all of your filesystems every time you boot [2].
systemd-fsck[145]: /dev/sda4: clean, 2977/296096 files, 85427/1217024 blocks
systemd-fsck[151]: /dev/sda1: clean, 345/26104 files, 34083/104388 blocks (check after next mount)
These messages mean that there are no problems with your filesystems and they are "clean". If there ever was a problem with any of your filesystems, these messages are how fsck will let you know so I don't think you want to hide them.
[1] https://wiki.archlinux.org/index.php/Fsck
[2] https://wiki.archlinux.org/index.php/Systemd#Automount -
Boot is taking forever (systemd-fsck?)
Im sorry for the bad topic.
When I boot Arch it stops and shows me this message for about 5 minutes or so (It feels like forever):
/dev/sda1: clean, 113567/640848 files, 662474/2561272 blocks
[ 1.582745] kvm: disabled by bios
systemd-fsck[242]: /dev/sda2: clean, 90976/640848 files, 505908/2558464 blocks
I dual boot with Windows and I reboot my computer on a daily basis (Im a gamer) so its driving me crazy.
I have googled it and read a bunch of topics for the past three days now.. Whats wrong?Hund wrote:
Bah.. Whats up with the systemd thingy anyway? Whats the benefits with it? So far Ive just seen a bunch of bugs. Arch used to work flawless for me, but ever since the switch to systemd it all went south. Boot hangs, shutdown hangs, no network at boot and autmounting my Samba share doesnt work.. Yay!
Edit: Atleast I solved the network at boot a few days ago. But I have no idea how I did it tbh.. Arch used to be so simple! But now with this systemd piece of shit? Its a mess.
The experience of most people is that sysytemd has introduced benefits; most of the issues that you are describing are probably fixable by some simple configuration changes.
In any event, we have grown rather tired of the petulant "systemd is a piece of shit"-type rants that a minority feel compelled to vent; please don't bother. If you don't like it, install something else.
FWIW: anyone who starts a sentence about a rolling release with a fond nostalgia for the past is clearly deluding themselves; change is at the core of Arch, deal with it. -
[SOLVED] systemd-fsck does checks on every boot
How do I say it to check only after crashes (bad unmounts and so on..) and just mount without checks otherwise?
I use the classic /etc/fstab layout:
/dev/drive/root / ext4 rw,relatime 0 1
/dev/drive/boot /boot ext4 rw,relatime,noexec 0 2
/dev/drive/swap none swap defaults 0 0
/dev/drive/var /var ext4 rw,relatime,nodev,noexec,nosuid 0 2
/dev/drive/home /home ext4 rw,relatime 0 2
Here is some info from systemd's journal:
дек. 08 22:43:20 localhost systemd[1]: Found device /dev/drive/var.
дек. 08 22:43:21 localhost systemd-fsck[124]: /dev/mapper/drive-root: clean, 56204/2621440 files, 523339/10485760 blocks
дек. 08 22:43:21 localhost systemd[1]: Started File System Check on Root Device.
дек. 08 22:43:21 localhost systemd[1]: Starting File System Check on /dev/drive/var...
дек. 08 22:43:21 localhost systemd[1]: Starting Remount Root and Kernel File Systems...
дек. 08 22:43:21 localhost systemd[1]: Found device /dev/drive/swap.
дек. 08 22:43:21 localhost systemd[1]: Activating swap /dev/drive/swap...
дек. 08 22:43:21 localhost systemd[1]: Found device /dev/drive/boot.
дек. 08 22:43:21 localhost systemd[1]: Starting File System Check on /dev/drive/boot...
дек. 08 22:43:21 localhost systemd[1]: Found device /dev/drive/home.
дек. 08 22:43:21 localhost systemd[1]: Starting File System Check on /dev/drive/home...
дек. 08 22:43:21 localhost systemd-fsck[252]: /dev/mapper/drive-var: clean, 2007/262144 files, 463082/1048576 blocks
дек. 08 22:43:22 localhost systemd[1]: Started Remount Root and Kernel File Systems.
дек. 08 22:43:22 localhost systemd[1]: Starting Local File Systems (Pre).
дек. 08 22:43:22 localhost systemd[1]: Reached target Local File Systems (Pre).
дек. 08 22:43:22 localhost systemd[1]: Mounting /var...
дек. 08 22:43:22 localhost systemd-fsck[257]: /dev/mapper/drive-boot: clean, 313/65536 files, 33914/262144 blocks
дек. 08 22:43:22 localhost systemd[1]: Mounted /var.
дек. 08 22:43:22 localhost systemd-fsck[262]: /dev/mapper/drive-home: clean, 5080/16375808 files, 2332630/65492992 blocks
дек. 08 22:43:22 localhost systemd[1]: Started File System Check on /dev/drive/boot.
дек. 08 22:43:22 localhost systemd[1]: Mounting /boot...
дек. 08 22:43:22 localhost systemd[1]: Started File System Check on /dev/drive/home.
дек. 08 22:43:22 localhost systemd[1]: Mounting /home...
дек. 08 22:43:22 localhost systemd[1]: Mounted /boot.
дек. 08 22:43:23 localhost systemd[1]: Mounted /home.
дек. 08 22:43:23 localhost systemd[1]: Starting Local File Systems.
дек. 08 22:43:23 localhost systemd[1]: Reached target Local File Systems.
These filesystem checks seem to add huge delay to boot time. But I don't want this delay!
Last edited by eruditorum (2012-12-10 19:26:54)falconindy wrote:These are the same checks that have always occurred.
But I want to remove them!
falconindy wrote:Notice that /home is mounted within the same second timestamp that it's fsck'd. Same goes for /boot, and /var is probably under a second as well. If you're seeing delays, go look elsewhere.
I think filesystem checks add delays (about one second for each logical volume or so), also as you know systemd is doing everything in parallel it can at the given moment of time, for example I can say you that water has already boiled, while it is still going to boil but you don't know it:
дек. 08 22:43:19 localhost systemd[1]: Starting File System Check on Root Device...
дек. 08 22:43:21 localhost systemd-fsck[124]: /dev/mapper/drive-root: clean, 56204/2621440 files, 523339/10485760 blocks
дек. 08 22:43:21 localhost systemd[1]: Started File System Check on Root Device.
дек. 08 22:43:21 localhost systemd[1]: Starting Remount Root and Kernel File Systems...
/var:
дек. 08 22:43:20 localhost systemd[1]: Found device /dev/drive/var.
дек. 08 22:43:21 localhost systemd[1]: Starting File System Check on /dev/drive/var...
дек. 08 22:43:21 localhost systemd-fsck[252]: /dev/mapper/drive-var: clean, 2007/262144 files, 463082/1048576 blocks
дек. 08 22:43:21 localhost systemd[1]: Started File System Check on /dev/drive/var.
дек. 08 22:43:22 localhost systemd[1]: Mounting /var...
дек. 08 22:43:22 localhost systemd[1]: Mounted /var.
/boot:
дек. 08 22:43:21 localhost systemd[1]: Found device /dev/drive/boot.
дек. 08 22:43:21 localhost systemd[1]: Starting File System Check on /dev/drive/boot...
дек. 08 22:43:22 localhost systemd-fsck[257]: /dev/mapper/drive-boot: clean, 313/65536 files, 33914/262144 blocks
дек. 08 22:43:22 localhost systemd[1]: Started File System Check on /dev/drive/boot.
дек. 08 22:43:22 localhost systemd[1]: Mounting /boot...
дек. 08 22:43:22 localhost systemd[1]: Mounted /boot.
/home:
дек. 08 22:43:21 localhost systemd[1]: Found device /dev/drive/home.
дек. 08 22:43:21 localhost systemd[1]: Starting File System Check on /dev/drive/home...
дек. 08 22:43:22 localhost systemd-fsck[262]: /dev/mapper/drive-home: clean, 5080/16375808 files, 2332630/65492992 blocks
дек. 08 22:43:22 localhost systemd[1]: Started File System Check on /dev/drive/home.
дек. 08 22:43:22 localhost systemd[1]: Mounting /home...
дек. 08 22:43:23 localhost systemd[1]: Mounted /home.
Last edited by eruditorum (2012-12-09 13:20:15) -
Booting problems with systemd, lvm, linux-ck-corex
Hi everyone,
since Friday I got some complications while booting my system.
I use systemd, pulseaudio, bluez, network-manger, gnome and gdm as login manager.
Every partition (root, home) without the boot and crypted swap partition is within a lvm volume group.
Xserver with gdm starts but the login mask does not appear. (only the background, mousepointer, topbar with clock, energy etc. are shown)
Switching to the getty2 works, but after typing username and password, nothing happens.
Only some messages from systemd are poping up, saying it couldn't mount my home partition (timeout).
That explains why I couldn't login.
Shutting down the system via the powerkey works.
Starting via a system rescue disk, mounting everything (including my home partition) and chrooting works fine.
Journalctl shows that there are more problems.
The network-manager times out.
Gnome-shell with consolekit-daemon and Pulseaudio fails to communicate with bluez over the dbus.
Some version information of the listed packages:
% pacman -Qii pulseaudio systemd gnome-shell dbus networkmanager bluez consolekit
Name : pulseaudio
Version : 2.1-1
URL : http://www.freedesktop.org/wiki/Software/PulseAudio
Licenses : GPL LGPL
Groups : None
Provides : None
Depends On : libpulse=2.1-1 rtkit libltdl speex tdb udev fftw orc libsamplerate webrtc-audio-processing libsystemd
Optional Deps : avahi: zeroconf support
bluez: bluetooth support
gconf: configuration through gconf (paprefs)
jack: jack support
lirc-utils: infra-red support
openssl: RAOP support
python2-pyqt: Equalizer GUI (qpaeq)
Required By : gnome-settings-daemon paprefs pulseaudio-alsa
Conflicts With : None
Replaces : None
Installed Size : 5412.00 KiB
Packager : Jan Alexander Steffens (heftig) <[email protected]>
Architecture : x86_64
Build Date : Thu Jul 19 21:18:15 2012
Install Date : Fri Jul 20 12:02:20 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : A featureful, general-purpose sound server
Backup Files:
UNMODIFIED /etc/pulse/daemon.conf
UNMODIFIED /etc/pulse/default.pa
UNMODIFIED /etc/pulse/system.pa
Name : systemd
Version : 188-2
URL : http://www.freedesktop.org/wiki/Software/systemd
Licenses : GPL2 LGPL2.1 MIT
Groups : None
Provides : None
Depends On : acl dbus-core libsystemd=188 kmod libcap pam systemd-tools=188 util-linux xz
Optional Deps : initscripts: legacy support for hostname and vconsole setup
initscripts-systemd: legacy generator for initialization scripts
python2-cairo: systemd-analyze
python2-dbus: systemd-analyze
systemd-arch-units: collection of native unit files for Arch daemon/init scripts
systemd-sysvcompat: symlink package to provide sysvinit binaries
Required By : systemd-arch-units
Conflicts With : None
Replaces : None
Installed Size : 4720.00 KiB
Packager : Dave Reisner <[email protected]>
Architecture : x86_64
Build Date : Sat Aug 11 01:17:44 2012
Install Date : Mon Aug 13 20:15:27 2012
Install Reason : Installed as a dependency for another package
Install Script : Yes
Description : system and service manager
Backup Files:
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.systemd1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.hostname1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.login1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.locale1.conf
UNMODIFIED /etc/dbus-1/system.d/org.freedesktop.timedate1.conf
UNMODIFIED /etc/systemd/system.conf
UNMODIFIED /etc/systemd/user.conf
UNMODIFIED /etc/systemd/logind.conf
UNMODIFIED /etc/systemd/journald.conf
Name : gnome-shell
Version : 3.4.2-1
URL : http://live.gnome.org/GnomeShell
Licenses : GPL2
Groups : gnome
Provides : None
Depends On : caribou folks gcr gjs gnome-bluetooth gnome-desktop gnome-menus libcroco libpulse mutter nautilus networkmanager telepathy-logger
telepathy-mission-control unzip
Optional Deps : network-manager-applet: shell integration for networkmanager
Required By : gnome-shell-extension-user-theme
Conflicts With : None
Replaces : None
Installed Size : 6064.00 KiB
Packager : Ionut Biru <[email protected]>
Architecture : x86_64
Build Date : Sat Jul 21 21:27:55 2012
Install Date : Sun Jul 22 20:51:39 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : The next generation GNOME Shell
Backup Files:
(none)
Name : dbus
Version : 1.6.4-1
URL : http://www.freedesktop.org/Software/dbus
Licenses : GPL custom
Groups : None
Provides : None
Depends On : dbus-core>=1.6.4 libx11
Optional Deps : None
Required By : avahi qt rtkit xfconf
Conflicts With : None
Replaces : None
Installed Size : 68.00 KiB
Packager : Andreas Radke <[email protected]>
Architecture : x86_64
Build Date : Sat Jul 21 13:15:36 2012
Install Date : Sat Jul 21 14:30:09 2012
Install Reason : Installed as a dependency for another package
Install Script : No
Description : Freedesktop.org message bus system
Backup Files:
(none)
Name : networkmanager
Version : 0.9.4.0-6
URL : http://www.gnome.org/projects/NetworkManager/
Licenses : GPL
Groups : None
Provides : None
Depends On : dbus-glib iproute2 libnl nss polkit udev wpa_supplicant ppp dhcpcd libsoup
Optional Deps : modemmanager: for modem management service
dhclient: alternative DHCP/DHCPv6 client
iptables: Connection sharing
dnsmasq: Connection sharing
bluez: Bluetooth support
openresolv: openresolv support
Required By : cnetworkmanager empathy gnome-shell libsocialweb network-manager-applet networkmanager-dispatcher-netfs networkmanager-dispatcher-ntpd
networkmanager-dispatcher-openntpd networkmanager-openconnect networkmanager-openvpn networkmanager-pptp networkmanager-vpnc tracker
Conflicts With : None
Replaces : None
Installed Size : 5232.00 KiB
Packager : Jan Alexander Steffens (heftig) <[email protected]>
Architecture : x86_64
Build Date : Fri Jun 15 21:21:11 2012
Install Date : Sat Aug 11 10:07:19 2012
Install Reason : Explicitly installed
Install Script : Yes
Description : Network Management daemon
Backup Files:
MODIFIED /etc/NetworkManager/NetworkManager.conf
Name : bluez
Version : 4.101-1
URL : http://www.bluez.org/
Licenses : GPL2
Groups : None
Provides : bluez-libs bluez-utils
Depends On : dbus-core python2 systemd-tools
Optional Deps : gstreamer0.10-base: bluetooth GStreamer support
alsa-lib: Audio bluetooth devices support
dbus-python: to run bluez-simple-agent
pygobject: to run bluez-simple-agent
libusb-compat: USB adapters support
cups: CUPS backend
Required By : blueman gvfs-obexftp kismet obexd-client openobex pilot-link qemu-kvm
Conflicts With : bluez-libs bluez-utils
Replaces : bluez-libs bluez-utils
Installed Size : 3452.00 KiB
Packager : Tom Gundersen <[email protected]>
Architecture : x86_64
Build Date : Sat Jun 23 13:02:36 2012
Install Date : Sat Aug 11 11:01:04 2012
Install Reason : Explicitly installed
Install Script : No
Description : Libraries and tools for the Bluetooth protocol stack
Backup Files:
UNMODIFIED /etc/bluetooth/main.conf
UNMODIFIED /etc/bluetooth/rfcomm.conf
MODIFIED /etc/bluetooth/audio.conf
UNMODIFIED /etc/bluetooth/network.conf
UNMODIFIED /etc/bluetooth/input.conf
UNMODIFIED /etc/bluetooth/serial.conf
UNMODIFIED /etc/conf.d/bluetooth
UNMODIFIED /etc/dbus-1/system.d/bluetooth.conf
Name : consolekit
Version : 0.4.6-4
URL : http://www.freedesktop.org/wiki/Software/ConsoleKit
Licenses : GPL
Groups : None
Provides : None
Depends On : polkit zlib libx11 dbus-glib
Optional Deps : None
Required By : gdm gnome-session slim xfce4-session
Conflicts With : None
Replaces : None
Installed Size : 720.00 KiB
Packager : Dave Reisner <[email protected]>
Architecture : x86_64
Build Date : Sun May 27 06:29:53 2012
Install Date : Fri Jun 1 19:13:35 2012
Install Reason : Installed as a dependency for another package
Install Script : No
Description : A framework for defining and tracking users, login sessions, and seats
Backup Files:
(none)
And the version of all the other packages:
% pacman -Q
3to2-hg 1.0-1
a52dec 0.7.4-6
aalib 1.4rc5-9
abs 2.4.3-2
accountsservice 0.6.22-1
acl 2.2.51-2
acpi 1.6-1
acpid 2.0.16-3
acroread 9.5.1-2
acsccid 1.0.2-3
activity-log-manager 0.9.4-1
adns 1.4-3
adobe-air 2.1-1
adobe-air-sdk 2.6-2
aisleriot 3.2.2-1
akonadi 1.8.0-1
alfont 2.0.9-6
allegro 5.0.7-1
allegro4 4.4.2-2
alleyoop 0.9.8-2
alsa-firmware 1.0.25-2
alsa-lib 1.0.25-1
alsa-oss 1.0.25-1
alsa-plugins 1.0.25-2
alsa-utils 1.0.25-3
anjuta 3.4.4-1
antiword 0.37-3
apache 2.2.22-4
apache-ant 1.8.4-1
apg 2.2.3-3
apiextractor 0.10.10-1
apr 1.4.6-1
apr-util 1.4.1-1
aptana-studio 3.2.1-1
aqsis 1.8.1-1
archlinux-keyring 20120812-1
argyllcms 1.4.0-4
aria2 1.15.1-2
art-sharp 2.24.2-2
artwiz-fonts 1.3-7
aspell 0.60.6.1-1
aspell-de 20120607-1
aspell-en 7.1-2
at-spi 1.32.0-5
at-spi2-atk 2.4.0-1
at-spi2-core 2.4.2-1
atk 2.4.0-1
atkmm 2.22.6-1
attica 0.4.0-1
attr 2.4.46-2
audacity 2.0.1-2
aurvote 1.3-1
autoconf 2.69-1
autoconf2.13 2.13-2
autofs 5.0.6-3
autogen 5.15-1
automake 1.12.2-1
automoc4 0.9.88-3
autopano-sift-c 2.5.1-3
avahi 0.6.31-3
avidemux-cli 2.5.6-3
avidemux-gtk 2.5.6-3
avidemux-qt 2.5.6-3
avifile 0.7.45-8
babl 0.1.10-1
banshee 2.4.1-1
baobab 3.4.1-2
bash 4.2.037-1
bash-completion 2.0-2
bc 1.06-8
beep 1.3-2
bin32-flashplayer-standalone 11.2.202.236-2
bin32-google-earth 6.0.3.2197-1
binutils-multilib 2.22-8
bison 2.6.2-1
blas 3.4.1-1
bleachbit 0.9.3-1
blender 4:2.64-2
bluefish 2.2.3-1
blueman 1.23-4
bluez 4.101-1
bogofilter 1.2.2-4
boo 0.9.4.9-2
boost 1.50.0-2
boost-libs 1.50.0-2
brasero 3.4.1-1
brltty 4.3-5
bsdiff 4.3-7
bullet 2.80-1
bullet-docs 2.80-1
bzip2 1.0.6-4
bzr 2.5.1-1
c-ares 1.9.0-1
ca-certificates 20120623-1
ca-certificates-java 20120608-1
cabal-install 0.14.0-2
cabextract 1.4-2
cairo 1.12.2-2
cairo-perl 1.082-2
cairomm 1.10.0-2
calibre 0.8.64-1
cantarell-fonts 0.0.8-1
caribou 0.4.2-1
catdoc 0.94.3-1
ccid 1.4.7-1
cdparanoia 10.2-4
cdrdao 1.2.3-6
cdrkit 1.1.11-2
cfitsio 3.310-1
cheese 3.4.2-1
cherrytree 0.26-1
chmlib 0.40-3
chromium 21.0.1180.75-1
chromium-pepper-flash 11.3.31.307-1
chrpath 0.13-3
cifs-utils 5.6-2
cksfv 1.3.14-2
clamav 0.97.5-2
clang 3.1-4
clang-analyzer 3.1-4
claws-mail 3.8.1-1
claws-mail-extra-plugins 3.8.1-1
cloog 0.17.0-2
clutter 1.10.6-1
clutter-gst 1.6.0-1
clutter-gtk 1.2.0-1
cmake 2.8.9-1
cnetworkmanager 0.21.1-3
codeblocks 10.05-2
cogl 1.10.4-1
colord 0.1.21-2
compositeproto 0.4.2-2
consolekit 0.4.6-4
coolreader 3.0.56-1
coreutils 8.17-3
cpio 2.11-3
cpufrequtils 008-2
crack-attack 1.1.14-6
crack-attack-sounds 1.1.14-4
cracklib 2.8.18-2
crafty 23.4-2
crayonphysicsdeluxe 55_3-3
crda 1.1.2-3
cronie 1.4.8-3
cross-arm-elf-binutils 2.21-2
cross-arm-elf-gcc-base 4.6.0-1
cryptsetup 1.5.0-1
csfml 1.99.git20120504-1
ctags 5.8-3
cups 1.6.1-4
cups-filters 1.0.20-1
cups-pdf 2.6.1-1
cups-pk-helper 0.2.2-1
curl 7.27.0-1
curlftpfs 0.9.2-4
cvs 1.11.23-8
d-feet 0.1.14-2
damageproto 1.2.1-2
dash 0.5.7-2
dasher 4.10.1-3
db 5.3.21-1
dbus 1.6.4-1
dbus-core 1.6.4-1
dbus-glib 0.100-1
dbus-sharp 0.7.0-4
dbus-sharp-glib 0.5.0-4
dconf 0.12.1-2
deb2targz 0.1-3
deja-dup 22.1-1
desktop-file-utils 0.20-1
devede 3.22.0-2
devhelp 3.4.1-1
device-mapper 2.02.96-3
dfhack-git 20120613-1
dhclient 4.2.4.1-1
dhcp 4.2.4.1-1
dhcpcd 5.5.6-1
dia 0.97.2-3
dialog 1.1_20120706-1
diffstat 1.55-1
diffutils 3.2-1
dirmngr 1.1.0-4
django 1.4.1-1
django-classy-tags 0.3.4.1-1
django-cms 2.2-1
django-mptt 0.5.1-1
django-sekizai 0.5-1
djvulibre 3.5.24-3
dkms 2.2.0.3-11
dmxproto 2.3.1-2
dnsmasq 2.62-1
dnssec-anchors 20120422-1
dnsutils 9.9.1.P2-1
docbook-xml 4.5-5
docbook-xsl 1.77.1-2
dosbox 0.74-3
dosfstools 3.0.12-1
dotconf 1.3-3
doxygen 1.8.1.2-1
dri2proto 2.8-1
dropbox-experimental 1.5.10-1
duplicity 0.6.19-1
dvd+rw-tools 7.1-4
dvdauthor 0.7.0-4
dvgrab 3.5-4
dwarffortress 0.34.11-1
dwarffortress-ironhand 0.73-4
dwarftherapist-hg 571-1
e2fsprogs 1.42.4-1
easytag 2.1.7-2
eclipse 4.2-1
eclipse-cdt 8.1.0-2
eclipse-ecj 3.7.1-1
eclipse-mylyn 3.8.1-1
eclipse-pydev 2.6.0-1
eclipse-qt-eclipse-integration-bin 1.6.1-2
eclipse-subclipse 1.8.14-1
eigen2 2.0.17-1
eject 2.1.5-7
ekiga 3.3.2-6
elfutils 0.154-1
emacs 24.1-2
empathy 3.4.2.3-1
enblend-enfuse 4.0-6
enca 1.13-2
enchant 1.6.0-4
engine_pkcs11 0.1.8-2
enscript 1.6.5.2-2
eog 3.4.3-1
eog-plugins 3.4.1-1
epiphany 3.4.3-1
epydoc 3.0.1-2
eric 5.2.4-1
eric-plugins 5.1.0-1
eric4 4.5.5-1
eric4-plugins 4.4.4a-1
eventlog 0.2.12-3
evince 3.4.0-1
evolution 3.4.3-1
evolution-data-server 3.4.3-1
evolution-exchange 3.4.3-1
exempi 2.2.0-1
exiv2 0.23-1
exo 0.8.0-1
expac 1-1
expat 2.1.0-1
extundelete 0.2.0-2
faac 1.28-4
faad2 2.7-3
fakeroot 1.18.4-1
farstream 0.1.2-1
fb-client 1.0.4-1
fbreader 0.99.1-1
fcrackzip 1.0-3
festival 2.1-3
ffmpeg 1:0.11.1-1
ffmpeg-compat 20120509-1
fftw 3.3.2-1
file 5.11-1
file-roller 3.4.2-1
filesystem 2012.7-1
filezilla 3.5.3-1
findutils 4.4.2-4
firefox 14.0.1-1
firefox-i18n 14.0.1-1
firefox-i18n-de 14.0.1-1
firefox-nightly 17.0a1-1
fixesproto 5.0-2
flac 1.2.1-3
flasher 3.5_2.5.2.2-2
flashplugin 11.2.202.236-1
flex 2.5.37-1
fltk 1.3.0-3
fltk-docs 1.3.0-3
fltk-games 1.3.0-3
fluidsynth 1.1.5-2
folks 0.6.9-2
font-bh-ttf 1.0.1-2
font-bitstream-speedo 1.0.1-2
font-misc-ethiopic 1.0.1-2
font-misc-meltho 1.0.1-2
fontconfig 2.8.0-2
fontsproto 2.1.2-1
foomatic-db 1:4.0.17_20120712-1
foomatic-db-engine 1:4.0.17_20120712-1
foomatic-db-nonfree 1:4.0.17_20120712-1
foomatic-filters 1:4.0.17_20120712-1
fortune-mod 1.99.1-5
fortune-mod-chucknorris 1-3
fortune-mod-discworld 0-2
fortune-mod-ferengi_rules_of_acquisition 20080318-1
fortune-mod-futurama 0.2-4
fortune-mod-himym 0.3-3
fortune-mod-hitchhiker 20050611-1
fortune-mod-house 20100911-1
fortune-mod-matrix 20091124-1
fortune-mod-misfits 0.1-2
fortune-mod-montypython 20091124-1
fortune-mod-simpsons-chalkboard 0-2
fortune-mod-southpark 20100911-1
fortune-mod-tbbt 0.5-1
fortune-mod-the-godfather 3.0-2
fox 1.6.46-1
freeglut 2.8.0-1
freeimage 3.15.3-1
freemind 0.9.0-2
freenet 0.7.5-1
freetype2 2.4.10-1
frei0r-plugins 1.3-3
fretsonfire 1.3.110-7
fribidi 0.19.2-2
ftgl 2.1.3rc5-3
ftjam 2.5.3rc2-3
fuse 2.9.1-1
fuseiso 20070708-4
fwbuilder 5.1.0.3599-2
gadmin-samba 0.3.3-1
gambas3-devel 3.2.1-4
gambas3-examples 3.2.1-4
gambas3-gb-cairo 3.2.1-4
gambas3-gb-chart 3.2.1-4
gambas3-gb-compress 3.2.1-4
gambas3-gb-crypt 3.2.1-4
gambas3-gb-db 3.2.1-4
gambas3-gb-db-form 3.2.1-4
gambas3-gb-db-mysql 3.2.1-4
gambas3-gb-db-odbc 3.2.1-4
gambas3-gb-db-postgresql 3.2.1-4
gambas3-gb-db-sqlite2 3.2.1-4
gambas3-gb-db-sqlite3 3.2.1-4
gambas3-gb-dbus 3.2.1-4
gambas3-gb-desktop 3.2.1-4
gambas3-gb-eval-highlight 3.2.1-4
gambas3-gb-form 3.2.1-4
gambas3-gb-form-dialog 3.2.1-4
gambas3-gb-form-mdi 3.2.1-4
gambas3-gb-form-stock 3.2.1-4
gambas3-gb-gsl 3.2.1-4
gambas3-gb-gtk 3.2.1-4
gambas3-gb-image 3.2.1-4
gambas3-gb-image-effect 3.2.1-4
gambas3-gb-image-imlib 3.2.1-4
gambas3-gb-image-io 3.2.1-4
gambas3-gb-net 3.2.1-4
gambas3-gb-net-curl 3.2.1-4
gambas3-gb-net-smtp 3.2.1-4
gambas3-gb-opengl 3.2.1-4
gambas3-gb-opengl-glsl 3.2.1-4
gambas3-gb-opengl-glu 3.2.1-4
gambas3-gb-option 3.2.1-4
gambas3-gb-pcre 3.2.1-4
gambas3-gb-pdf 3.2.1-4
gambas3-gb-qt4 3.2.1-4
gambas3-gb-qt4-ext 3.2.1-4
gambas3-gb-qt4-opengl 3.2.1-4
gambas3-gb-qt4-webkit 3.2.1-4
gambas3-gb-report 3.2.1-4
gambas3-gb-sdl 3.2.1-4
gambas3-gb-sdl-sound 3.2.1-4
gambas3-gb-settings 3.2.1-4
gambas3-gb-signal 3.2.1-4
gambas3-gb-v4l 3.2.1-4
gambas3-gb-vb 3.2.1-4
gambas3-gb-web 3.2.1-4
gambas3-gb-xml 3.2.1-4
gambas3-gb-xml-rpc 3.2.1-4
gambas3-gb-xml-xslt 3.2.1-4
gambas3-ide 3.2.1-4
gambas3-runtime 3.2.1-4
gambas3-script 3.2.1-4
gamin 0.1.10-6
garcon 0.2.0-1
gavl 1.2.0-2
gawk 4.0.1-1
gc 7.2-1
gcalctool 6.4.2.1-1
gcc-fortran 4.7.1-5
gcc-libs-multilib 4.7.1-5
gcc-multilib 4.7.1-5
gcolor2 0.4-6
gconf 3.2.5-2
gconf-editor 3.0.0-2
gconf-sharp 2.24.2-2
gconf-sharp-peditors 2.24.2-2
gconfmm 2.28.3-1
gcr 3.4.1-1
gd 2.0.36RC1-5
gdal 1.9.0-1
gdata-sharp 1.7.0.1-2
gdb 7.4.1-1
gdbm 1.10-1
gdk-pixbuf2 2.26.1-1
gdl 3.4.2-1
gdm 3.4.1-2
gedit 3.4.2-1
gedit-plugins 3.4.0-2
geeqie 1.0-7
gegl 0.2.0-2
generatorrunner 0.6.16-1
geoclue 0.12.0-5
geoip 1.4.8-2
geoip-database 20120706-1
geos 3.3.4-1
gettext 0.18.1.1-4
gettext-mono 0.18.1.1-1
ghc 7.4.2-1
ghex 3.4.1-1
ghostscript 9.06-1
giflib 4.1.6-5
gimp 2.8.0-2
gimp-fourier 0.4.1-1
gimp-gap 2.6.0-3
gimp-paint-studio 1.5_final-1
gimp-plugin-dcamnoise2 0.64-6
gimp-plugin-dds 2.0.9-1
gimp-plugin-pandora 0.9.3-2
gimp-plugin-texturize 2.1-3
gimp-resynth 1:20120508-1
gimpfx-foundry 2.6_1-2
git 1.7.11.4-1
git-term 1.2.6-2
gjs 1.32.0-2
gkeyfile-sharp 0.1-2
gksu 2.0.2-4
glade 3.12.1-1
glew 1.8.0-1
glhack 1.2-6
glib-networking 2.32.3-1
glib-perl 1.260-1
glib2 2.32.4-1
glibc 2.16.0-2
glibmm 2.32.1-1
glpk 4.47-1
glproto 1.4.16-1
gmime 2.6.10-1
gmp 5.0.5-1
gnochm 0.9.11-11
gnome-activity-journal-bzr 1251-1
gnome-applets 3.4.1-1
gnome-backgrounds 3.4.2-1
gnome-bluetooth 3.4.2-1
gnome-color-manager 3.4.2-2
gnome-common 3.4.0.1-2
gnome-contacts 3.4.1-1
gnome-control-center 3.4.2-1
gnome-cups-manager 0.33-6
gnome-desktop 1:3.4.2-1
gnome-desktop2 2.32.1-2
gnome-dictionary 3.4.0-1
gnome-disk-utility 3.4.1-1
gnome-doc-utils 0.20.10-1
gnome-documents 0.4.2-1
gnome-font-viewer 3.4.0-1
gnome-games 3.4.2-1
gnome-games-extra-data 3.2.0-1
gnome-icon-theme 3.4.0-1
gnome-icon-theme-extras 3.4.0-1
gnome-icon-theme-symbolic 3.4.0-1
gnome-inform7 6G60-3
gnome-js-common 0.1.2-2
gnome-keyring 3.4.1-3
gnome-media 3.4.0-1
gnome-menus 3.4.2-1
gnome-mime-data 2.18.0-6
gnome-nettool 3.1.1-1
gnome-online-accounts 3.4.2-1
gnome-packagekit 3.4.2-1
gnome-panel 3.4.2.1-1
gnome-power-manager 3.4.0-1
gnome-print-sharp 2.26.0-7
gnome-python 2.28.1-8
gnome-python-extras 2.25.3-12
gnome-screensaver 3.4.4-1
gnome-screenshot 3.4.1-1
gnome-search-tool 3.4.0-1
gnome-session 3.4.2-3
gnome-settings-daemon 3.4.2-1
gnome-settings-daemon-updates 3.4.2-1
gnome-sharp 2.24.2-2
gnome-shell 3.4.2-1
gnome-shell-extension-user-theme 3.2.3-1
gnome-speech 0.4.25-2
gnome-system-log 3.4.1-1
gnome-system-monitor 3.4.1-1
gnome-terminal 3.4.1.1-1
gnome-themes-extras 2.22.0-3
gnome-themes-standard 3.4.2-1
gnome-tweak-tool 3.4.0.1-1
gnome-user-docs 3.4.2-1
gnome-utils 3.4.0-1
gnome-vfs 2.24.4-6
gnome-vfs-sharp 2.24.2-2
gnome-video-effects 0.4.0-1
gnonlin 0.10.16-2
gnuchess 6.0.2-1
gnunet 0.9.3-1
gnunet-gtk 0.9.3-1
gnupg 2.0.19-2
gnuplot 4.6.0-3
gnutls 3.0.22-1
gobject-introspection 1.32.1-2
goocanvas 2.0.1-2
goocanvas1 1.0.0-1
gourmet 0.15.9-2
gparted 0.13.1-1
gperf 3.0.4-4
gpgme 1.3.1-4
gphoto2 2.4.14-1
gpm 1.20.6-10
gprolog 1.4.0-2
gpsim 0.26.1-2
gputils 0.14.1-1
grantlee 0.2.0-1
graphicsmagick 1.3.16-1
graphite 1:1.0.3-1
graphviz 2.28.0-10
grep 2.13-2
groff 1.21-2
grsync 1.2.1-1
grub-bios 2.00-1
grub-common 2.00-1
gsettings-desktop-schemas 3.4.2-1
gsfonts 1.0.7pre44-3
gsl 1.15-2
gsm 1.0.13-7
gsmartcontrol 0.8.7-1
gssdp 0.12.1-1
gstreamer0.10 0.10.36-1
gstreamer0.10-bad 0.10.23-2
gstreamer0.10-bad-plugins 0.10.23-2
gstreamer0.10-base 0.10.36-1
gstreamer0.10-base-plugins 0.10.36-1
gstreamer0.10-ffmpeg 0.10.13-1
gstreamer0.10-good 0.10.31-1
gstreamer0.10-good-plugins 0.10.31-1
gstreamer0.10-python 0.10.22-1
gstreamer0.10-ugly 0.10.19-2
gstreamer0.10-ugly-plugins 0.10.19-2
gthumb 3.0.1-2
gtk-doc 1.18-1
gtk-engines 2.21.0-1
gtk-recordmydesktop 0.3.8-6
gtk-sharp-2 2.12.11-1
gtk-update-icon-cache 2.24.11-2
gtk-vnc 0.5.0-1
gtk2 2.24.11-2
gtk2+extra 2.1.2-2
gtk2-perl 1.244-1
gtk2-xfce-engine 3.0.0-1
gtk3 3.4.4-1
gtkglext 1.2.0-7
gtkglextmm 1.2.0-8
gtkhtml 3.32.2-3
gtkhtml-sharp 2.26.0-8
gtkhtml4 4.4.3-1
gtkmm 2.24.2-2
gtkmm3 3.4.0-1
gtksourceview2 2.10.5-2
gtksourceview2-sharp 2.26.0-8
gtksourceview3 3.4.2-1
gtkspell 2.0.16-2
gts 0.7.6-2
gucharmap 3.4.1.1-1
gudev-sharp 0.1-2
guile 1.8.8-2
gupnp 0.18.2-1
gupnp-av 0.10.2-1
gupnp-dlna 0.6.6-1
gutenprint 5.2.9-1
guvcview 1.6.0-2
gvfs 1.12.3-3
gvfs-gphoto2 1.12.3-3
gvfs-obexftp 1.12.3-3
gvfs-smb 1.12.3-3
gzip 1.5-1
hammerfight 1:1.004-1
handbrake 0.9.8-1
handbrake-cli 0.9.8-1
happy 1.18.9-5
haxe 2.10-1
hdf5 1.8.8-1
hdparm 9.39-1
heirloom-mailx 12.5-3
help2man 1.40.11-1
hibiscus 2.2.1-2
hicolor-icon-theme 0.12-2
hot-babe 0.2.2-11
hplip 3.12.6-3
hspell 1.1-2
hsqldb-java 1:1.8.0.10-2
httrack 3.46.1-1
hugin 2011.4.0-5
hunspell 1.3.2-1
hunspell-de 20120607-1
hunspell-en 7.1-2
hwids 20120730-1
hwloc 1.4.2-1
hydrogen 0.9.5-2
hyphen 2.8.5-1
i2p 0.9.1-1
iana-etc 2.30-3
iat 0.1.7-4
icedtea-web-java7 1.2.1-2
icon-naming-utils 0.8.90-2
icoutils 0.29.1-2
icu 49.1.2-2
id3lib 3.8.3-12
idnkit 1.0-2
ilmbase 1.0.2-1
imagemagick 6.7.8.9-1
imlib2 1.4.5-2
indent 2.2.11-2
inetutils 1.9.1-2
inform7 6G60-1
inkscape 0.48.3.1-4
inputproto 2.2-1
intel-tbb 4.0_20120613-1
intltool 0.50.2-1
iproute2 3.4.0-2
iptables 1.4.14-3
iputils 20101006-4
ipython 0.13-1
ipython2 0.13-1
isl 0.10-1
iso-codes 3.38-1
itstool 1.1.2-1
iw 3.4-1
jack 0.121.3-6
jade 1.2.1-8
jameica 2.2-3
jamestown 1.0.1-1
jasper 1.900.1-7
java-rhino 1.7R3-3
jdk7-openjdk 7.u5_2.2.1-1
jfsutils 1.1.15-3
john 1.7.9-6
jre7-openjdk 7.u5_2.2.1-1
jre7-openjdk-headless 7.u5_2.2.1-1
js 1.8.5-3
json-c 0.9-1
json-glib 0.14.2-1
jython 2.5.2-2
kactivities 4.9.0-1
kbd 1.15.3-3
kbproto 1.0.6-1
kdebase-runtime 4.9.0-3
kdelibs 4.9.0-4
kdelibs3 3.5.10-13
kdenlive 0.9.2-2
kdepimlibs 4.9.0-1
keyutils 1.5.5-3
khrplatform-devel 8.0.4-2
kismet 2011_03_R2-4
kmod 9-2
komodo-ide 7.0.2_70257-1
komodoedit 7.1.0_10496-1
krb5 1.10.3-1
ktechlab 0.3.7-3
ladspa 1.13-3
lame 3.99.5-1
lapack 3.4.1-1
laptop-mode-tools 1.61-2
latexila 2.4.0-6
lcms 1.19-2
lcms2 2.3-2
ld-lsb 3-4
ldns 1.6.13-1
leptonica 1.69-3
less 444-3
lesstif 0.95.2-4
lftp 4.3.8-1
lib32-acl 2.2.51-2
lib32-allegro 5.0.7-1
lib32-alsa-lib 1.0.25-1
lib32-alsa-plugins 1.0.25-1
lib32-atk 2.4.0-1
lib32-attr 2.4.46-2
lib32-bzip2 1.0.6-1
lib32-cairo 1.12.2-1
lib32-curl 7.26.0-1
lib32-dbus-core 1.6.4-1
lib32-e2fsprogs 1.42.4-1
lib32-expat 2.1.0-1
lib32-flac 1.2.1-8
lib32-fontconfig 2.8.0-4
lib32-freetype2 2.4.10-1
lib32-gcc-libs 4.7.1-5
lib32-gdk-pixbuf2 2.26.1-2
lib32-gettext 0.18.1.1-2
lib32-giflib 4.1.6-6
lib32-glew 1.8.0-1
lib32-glew1.5 1.5.8-1
lib32-glib2 2.32.4-1
lib32-glibc 2.16.0-2
lib32-gtk2 2.24.11-1
lib32-jack 0.121.3-1
lib32-json-c 0.9-2
lib32-keyutils 1.5.5-1
lib32-krb5 1.10.2-1
lib32-lcms 1.19-4
lib32-libasyncns 0.8-6
lib32-libcanberra 0.28-2
lib32-libcanberra-pulse 0.28-2
lib32-libcap 2.22-1
lib32-libcups 1.6.1-1
lib32-libdrm 2.4.37-1
lib32-libdrm-nouveau1 2.4.33-1
lib32-libffi 3.0.11-1
lib32-libgcrypt 1.5.0-1
lib32-libgl 8.0.4-4
lib32-libglade 2.6.4-5
lib32-libglapi 8.0.4-4
lib32-libgpg-error 1.10-1
lib32-libice 1.0.8-1
lib32-libjpeg-turbo 1.2.1-1
lib32-libjpeg6 6b1-1
lib32-libldap 2.4.32-1
lib32-libltdl 2.4.2-6
lib32-libmikmod 3.1.12-6
lib32-libmng 1.0.10-6
lib32-libogg 1.3.0-1
lib32-libpciaccess 0.13.1-1
lib32-libpng 1.5.12-1
lib32-libpng12 1.2.50-1
lib32-libpulse 2.1-1
lib32-libsm 1.2.1-1
lib32-libsndfile 1.0.25-2
lib32-libssh2 1.4.2-1
lib32-libtiff 4.0.2-1
lib32-libusb 1.0.9-1
lib32-libusb-compat 0.1.4-2
lib32-libvorbis 1.3.3-1
lib32-libx11 1.5.0-1
lib32-libxau 1.0.7-1
lib32-libxcb 1.8.1-2
lib32-libxcomposite 0.4.3-3
lib32-libxcursor 1.1.13-1
lib32-libxdamage 1.1.3-4
lib32-libxdmcp 1.1.1-1
lib32-libxext 1.3.1-1
lib32-libxfixes 5.0-1
lib32-libxft 2.3.1-1
lib32-libxi 1.6.1-1
lib32-libxinerama 1.1.2-1
lib32-libxml2 2.7.8-2
lib32-libxmu 1.1.1-1
lib32-libxpm 3.5.9-2
lib32-libxrandr 1.3.2-2
lib32-libxrender 0.9.7-1
lib32-libxss 1.2.2-1
lib32-libxt 1.1.3-1
lib32-libxtst 1.2.1-1
lib32-libxv 1.0.7-1
lib32-libxxf86dga 1.1.3-1
lib32-libxxf86vm 1.1.2-1
lib32-mesa 8.0.4-4
lib32-mpg123 1.14.4-1
lib32-ncurses 5.9-1
lib32-nouveau-dri 8.0.4-1
lib32-nspr 4.9.2-1
lib32-nss 3.13.5-1
lib32-openal 1.14-1
lib32-openssl 1.0.1.c-1
lib32-pango 1.30.1-1
lib32-pcre 8.31-1
lib32-physfs 2.0.2-2
lib32-pixman 0.26.2-1
lib32-qt 4.8.2-2
lib32-readline 6.2.004-1
lib32-sdl 1.2.15-2
lib32-sdl_image 1.2.12-2
lib32-sdl_mixer 1.2.11-3
lib32-sdl_ttf 2.0.11-1
lib32-smpeg 0.4.4-9
lib32-sqlite3 3.7.13-1
lib32-tdb 1.2.9-1
lib32-util-linux 2.21.2-1
lib32-v4l-utils 0.8.8-1
lib32-xcb-util 0.3.9-1
lib32-zlib 1.2.7-1
libanjuta 3.4.4-1
libao 1.1.0-2
libarchive 3.0.4-1
libart-lgpl 2.3.21-2
libass 0.10.0-3
libassuan 2.0.3-1
libasyncns 0.8-4
libatasmart 0.18-2
libavc1394 0.5.4-1
libbluray 0.2.2-1
libbonobo 2.32.1-2
libbonoboui 2.24.5-2
libcaca 0.99.beta18-1
libcanberra 0.28-5
libcanberra-gstreamer 0.28-5
libcanberra-pulse 0.28-5
libcap 2.22-3
libcap-ng 0.6.6-1
libcdaudio 0.99.12-6
libcddb 1.3.2-3
libcdio 0.83-1
libchamplain 0.12.3-1
libcroco 0.6.5-1
libcups 1.6.1-4
libdaemon 0.14-2
libdatrie 0.2.5-1
libdbusmenu-qt 0.9.2-1
libdc1394 2.1.3-2
libdca 0.0.5-3
libdiscid 0.2.2-2
libdmtx 0.7.4-3
libdmx 1.1.2-1
libdrm 2.4.37-1
libdrm-nouveau1 2.4.33-1
libdv 1.0.0-4
libdvbpsi 0.2.2-1
libdvdcss 1.2.12-1
libdvdnav 4.2.0-2
libdvdread 4.2.0-1
libebml 1.2.2-2
libedit 20120311_3.0-1
libegl 8.0.4-2
libetpan 1.0-4
libevent 2.0.19-1
libexif 0.6.21-1
libextractor 0.6.3-6
libffi 3.0.11-1
libfontenc 1.1.1-1
libftdi 0.20-1
libgcrypt 1.5.0-3
libgda 5.0.3-1
libgdata 0.12.0-1
libgdiplus 2.10-2
libgee 0.6.5-1
libgeotiff 1.3.0-2
libgexiv2 0.4.1-3
libgksu 2.0.12-5
libgl 8.0.4-2
libglade 2.6.4-3
libglademm 2.6.7-2
libglapi 8.0.4-2
libgme 0.6.0-2
libgnome 2.32.1-3
libgnome-data 2.32.1-3
libgnome-desktop-sharp 2.26.0-8
libgnome-keyring 3.4.1-1
libgnome-media-profiles 3.0.0-3
libgnome-sharp 2.24.2-2
libgnomecanvas 2.30.3-2
libgnomecups 0.2.3-11
libgnomekbd 3.4.0.2-1
libgnomeprint 2.18.8-5
libgnomeprintui 2.18.6-4
libgnomeui 2.24.5-1
libgpg-error 1.10-2
libgphoto2 2.4.14-1
libgpod 0.8.2-6
libgsf 1.14.23-1
libgssglue 0.3-1
libgtkhtml 2.11.1-4
libgtop 2.28.4-1
libgusb 0.1.3-1
libgweather 3.4.1-1
libgxps 0.2.2-1
libical 0.48-1
libice 1.0.8-1
libid3tag 0.15.1b-7
libidl2 0.8.14-2
libidn 1.25-1
libiec61883 1.2.0-3
libieee1284 0.2.11-4
libimobiledevice 1.1.4-2
libiodbc 3.52.8-1
libircclient 1.6-1
libirman 0.4.5-3
libjpeg-turbo 1.2.1-1
libjpeg6-turbo 1.2.1-1
libkate 0.4.1-3
libksba 1.2.0-2
libldap 2.4.32-1
liblinebreak 2.1-1
liblouis 2.3.0-1
liblqr 0.4.1-3
liblrdf 0.5.0-1
libltdl 2.4.2-6
libmad 0.15.1b-6
libmatroska 1.3.0-2
libmicrohttpd 0.9.21-1
libmikmod 3.1.12-4
libmirage 1.5.0-1
libmms 0.6.2-1
libmng 1.0.10-4
libmodplug 0.8.8.4-1
libmp4v2 2.0.0-2
libmpc 0.9-2
libmpcdec 1.2.6-3
libmpeg2 0.5.1-3
libmtp 1.1.3-1
libmusicbrainz3 3.0.3-2
libmusicbrainz4 4.0.3-1
libmysqlclient 5.5.27-1
libmythes 1:1.2.3-1
libnice 0.1.2-1
libnl 3.2.11-1
libnl1 1.1-1
libnotify 0.7.5-1
liboauth 0.9.6-1
libofa 0.9.3-4
libogg 1.3.0-1
libotf 0.9.12-2
libotr 3.2.0-3
libp11 0.2.8-1
libpano13 2.9.18-2
libpcap 1.3.0-1
libpciaccess 0.13.1-1
libpeas 1.4.0-2
libpipeline 1.2.1-1
libplist 1.8-2
libpng 1.5.12-1
libpng12 1.2.50-1
libpng14 1.4.11-1
libproxy 0.4.7-2
libpst 0.6.54-2
libpulse 2.1-1
libpurple 2.10.6-1
libquvi 0.4.1-1
libquvi-scripts 0.4.6-1
libqzeitgeist 0.8.0-2
libraw 0.14.6-1
libraw1394 2.0.7-2
libreoffice-base 3.5.5-1
libreoffice-calc 3.5.5-1
libreoffice-common 3.5.5-1
libreoffice-de 3.5.5-1
libreoffice-draw 3.5.5-1
libreoffice-extension-ct2n 3.4.5-2
libreoffice-extension-diagram 3.4.5-2
libreoffice-extension-google-docs 3.4.5-2
libreoffice-extension-hunart 3.4.5-2
libreoffice-extension-nlpsolver 3.5.5-1
libreoffice-extension-numbertext 3.4.5-2
libreoffice-extension-oooblogger 3.4.5-2
libreoffice-extension-pdfimport 3.5.5-1
libreoffice-extension-presentation-minimizer 3.5.5-1
libreoffice-extension-presenter-screen 3.5.5-1
libreoffice-extension-report-builder 3.5.5-1
libreoffice-extension-scripting-beanshell 3.4.5-2
libreoffice-extension-scripting-javascript 3.4.5-2
libreoffice-extension-scripting-python 3.5.5-1
libreoffice-extension-typo 3.4.5-2
libreoffice-extension-validator 3.4.5-2
libreoffice-extension-watch-window 3.4.5-2
libreoffice-extension-wiki-publisher 3.5.5-1
libreoffice-gnome 3.5.5-1
libreoffice-impress 3.5.5-1
libreoffice-math 3.5.5-1
libreoffice-writer 3.5.5-1
librpcsecgss 0.19-7
librsvg 2.36.1-1
librsync 0.9.7-6
libsamplerate 0.1.8-1
libsasl 2.1.23-9
libshiboken 1.1.1-1
libshout 1:2.3.0-1
libsidplay 1.36.59-5
libsigc++ 2.2.10-2
libsigsegv 2.10-1
libsm 1.2.1-1
libsndfile 1.0.25-2
libsocialweb 0.25.20-1
libsoup 2.38.1-1
libsoup-gnome 2.38.1-1
libspectre 0.2.7-1
libssh 0.5.2-1
libssh2 1.4.2-1
libstdc++5 3.3.6-4
libsystemd 188-2
libtasn1 2.13-1
libthai 0.1.18-1
libtheora 1.1.1-2
libtiff 4.0.2-1
libtiff4 3.9.5-4
libtiger 0.3.4-3
libtirpc 0.2.2-2
libtool 2.4.2-6
libtorrent-rasterbar 1:0.16.2-1
libtracker-sparql 0.14.2-1
libunique 1.1.6-5
libunique3 3.0.2-2
libunistring 0.9.3-5
libunrar 4.2.4-1
libupnp 1.6.17-1
libusb-compat 0.1.4-2
libusbx 1.0.12-2
libva 1.1.0-1
libvdpau 0.4.1-2
libvisual 0.4.0-4
libvncserver 0.9.9-1
libvorbis 1.3.3-1
libvpx 1.1.0-1
libwacom 0.6-1
libwbclient 3.6.7-1
libwebkit 1.8.2-1
libwebkit3 1.8.2-1
libwebp 0.1.99-1
libwmf 0.2.8.4-9
libwnck 2.30.7-1
libwnck3 3.4.2-1
libwpd 0.9.4-1
libwpg 0.2.1-1
libwps 0.2.2-2
libx11 1.5.0-1
libxau 1.0.7-1
libxaw 1.0.11-1
libxcb 1.8.1-1
libxcomposite 0.4.3-2
libxcursor 1.1.13-1
libxdamage 1.1.3-2
libxdmcp 1.1.1-1
libxext 1.3.1-1
libxfce4ui 4.10.0-1
libxfce4util 4.10.0-1
libxfixes 5.0-2
libxfont 1.4.5-1
libxft 2.3.1-1
libxi 1.6.1-1
libxinerama 1.1.2-1
libxkbfile 1.0.8-1
libxklavier 5.2.1-2
libxmi 1.2-5
libxml2 2.8.0-1
libxmu 1.1.1-1
libxp 1.0.1-3
libxpm 3.5.10-1
libxrandr 1.4.0-1
libxrender 0.9.7-1
libxres 1.0.6-1
libxslt 1.1.26-3
libxss 1.2.2-1
libxt 1.1.3-1
libxtst 1.2.1-1
libxv 1.0.7-1
libxvmc 1.0.7-1
libxxf86dga 1.1.3-1
libxxf86vm 1.1.2-1
libyaml 0.1.4-2
libytnef 1.5-3
libzeitgeist 0.3.18-2
licenses 2.9-1
liferea 1.8.7-1
links 2.7-1
linux 3.4.7-1
linux-api-headers 3.4.6-1
linux-ck-corex 3.4.8-1
linux-ck-corex-headers 3.4.8-1
linux-docs 3.4.7-1
linux-firmware 20120625-1
linux-headers 3.4.7-1
linux-mainline 3.6rc1-1
linux-manpages 3.1-1
linux-pf-core2 3.5.1-1
lirc-utils 1:0.9.0-22
llvm 3.1-4
lmms 0.4.13-1
logrotate 3.8.2-1
lpsolve 5.5.2.0-2
lsof 4.86-1
lua 5.1.5-2
lvm2 2.02.96-3
lyx 2.0.4-1
lzo2 2.06-1
m4 1.4.16-2
make 3.82-4
makedepend 1.0.3-2
makehuman 1.0alpha6-1
man-db 2.6.2-1
man-pages 3.41-1
mash 0.2.0-1
maxima 5.27.0-2
mc 4.8.4-1
mcelog 1.0pre3-3
mcpp 2.7.2-4
mdadm 3.2.5-2
media-player-info 17-1
megaglest 3.6.0.3-3
megaglest-data 3.6.0.3-1
meld 1.6.0-1
mencoder 35014-1
mercurial 2.3-1
mesa 8.0.4-2
metacity 2.34.5-1
metakit 2.4.9.7-5
mime-types 8-1
miniupnpc 1.6-2
miro 5.0.2-1
mixxx 1.10.1-1
mjpegtools 2.0.0-2
mkinitcpio 0.10-1
mkinitcpio-busybox 1.20.1-1
mkvtoolnix-cli 5.7.0-3
mlocate 0.25-2
mlt 0.8.0-1
mobile-broadband-provider-info 20120614-1
modemmanager 0.5.2.0-2
modprobed_db 2.0-2
mono 2.10.8-1
mono-addins 0.6.2-2
mono-basic 2.10-2
mono-debugger 2.10-2
mono-tools 2.10-2
mono-upnp 0.1.2-1
mono-zeroconf 0.9.0-3
monodevelop 3.0.3.5-2
monodevelop-debugger-gdb 3.0.3.5-1
monodevelop-debugger-mdb 2.4-1
mousetweaks 3.4.2-1
mozilla-common 1.4-3
mpfr 3.1.1-1
mpg123 1.14.4-1
mplayer 35014-1
mtasc 20091229-4
mtdev 1.1.2-1
mtools 4.0.17-2
musicbrainz 2.1.5-5
mutagen 1.20-4
mutter 3.4.1-2
mx 1.4.6-1
mysql 5.5.27-1
mysql-clients 5.5.27-1
mysql-python 1.2.3-3
namcap 3.2.4-1
nano 2.2.6-2
nasm 2.10.03-1
nautilus 3.4.2-1
nautilus-dropbox 1.4.0-2
nautilus-open-terminal 0.19-2
nautilus-sendto 3.0.3-1
ncftp 3.2.5-2
ncurses 5.9-3
neko 1.8.2-8
neon 0.29.6-4
nepomuk-core 4.9.0-1
net-snmp 5.7.1-3
net-tools 1.60.20110819cvs-3
netcdf 4.2.1-1
netkit-bsd-finger 0.17-7
netlogo 5.0.2-1
nettle 2.5-1
network-manager-applet 0.9.4.1-1
networkmanager 0.9.4.0-6
networkmanager-dispatcher-netfs 1.0-2
networkmanager-dispatcher-ntpd 1.0-3
networkmanager-dispatcher-openntpd 1.0-4
networkmanager-openconnect 0.9.4.0-1
networkmanager-openvpn 0.9.4.0-1
networkmanager-pptp 0.9.4.0-1
networkmanager-vpnc 0.9.4.0-1
nfs-utils 1.2.6-1
nfsidmap 0.24-3
nickle 2.70-2
nltk-data 2.0-7
nmap 6.01-1
notification-daemon 0.7.4-1
nouveau-dri 8.0.4-2
nouveau-firmware 20091212-4
nspluginwrapper 1.4.4-2.1
nspr 4.9.2-1
nss 3.13.5-1
nss-mdns 0.10-5
ntfs-3g 2012.1.15-3
ntfsprogs 2012.1.15-3
ntp 4.2.6.p5-7
nvidia-cg-toolkit 3.1-2
obex-data-server 0.4.6-2
obexd-client 0.47-1
ocaml 3.12.1-3
ocrfeeder 0.7.9-1
octave 3.6.2-1
ogre 1.8.0-3
ogre-docs 1.8.0-3
ois 1.3-2
opal 3.10.5-1
openal 1.14-1
opencollada 869-1
openconnect 1:3.18-1
opencore-amr 0.1.3-1
opencv-svn 9044-1
openexr 1.7.0-2
openimageio 1.0.8-1
openjpeg 1.5.0-1
openmpi 1.6-2
openntpd 3.9p1-15
openobex 1.5-3
openresolv 3.5.1-1
opensc 0.12.2-3
openslp 1.2.1-4
openssh 6.0p1-3
openssl 1.0.1.c-1
openvpn 2.2.2-1
oprofile 0.9.7-4
orbit2 2.14.19-2
orc 0.4.16-1
orca 3.4.2-1
oxygen-icons 4.9.0-1
p11-kit 0.12-1
p7zip 9.20.1-6
package-query 1.0.1-1
packagekit 0.6.22-1
pacman 4.0.3-3
pacman-color 4.0.3-3
pacman-contrib 4.0.3-1
pacman-mirrorlist 20120626-1
pacmatic 20120218-1
pam 1.1.5-4
pambase 20120701-1
pango 1.30.1-1
pango-perl 1.223-2
pangomm 2.28.4-1
paprefs 0.9.10-2
parted 3.1-1
patch 2.6.1-3
pavucontrol 1.0-1
pbsdk-linux 1.1.0-1
pciutils 3.1.10-1
pcmciautils 018-4
pcre 8.31-1
pcsc-ctapi-wrapper 0.3-1
pcsc-cyberjack 3.99.5_SP03-2
pcsc-perl 1.4.12-3
pcsc-tools 1.4.20-1
pcsclite 1.8.5-1
pdfcrack 0.11-1
pdfedit 0.4.5-2
pdnsd 1.2.9-2
perl 5.16.1-1
perl-crypt-ssleay 0.64-1
perl-digest-sha1 2.13-3
perl-encode-locale 1.03-1
perl-error 0.17018-1
perl-file-listing 6.04-1
perl-html-parser 3.69-2
perl-html-tagset 3.20-3
perl-http-cookies 6.01-1
perl-http-daemon 6.01-1
perl-http-date 6.02-1
perl-http-message 6.03-1
perl-http-negotiate 6.01-1
perl-image-exiftool 8.99-1
perl-io-socket-ssl 1.76-1
perl-libwww 6.04-1
perl-locale-gettext 1.05-9
perl-lwp-mediatypes 6.02-1
perl-lwp-protocol-https 6.03-1
perl-mozilla-ca 20120309-1
perl-net-http 6.03-1
perl-net-ssleay 1.48-2
perl-string-crc32 1.4-8
perl-test-pod 1.45-1
perl-try-tiny 0.11-1
perl-uri 1.60-1
perl-www-robotrules 6.02-1
perl-xml-libxml 1.98-1
perl-xml-libxslt 1.77-1
perl-xml-namespacesupport 1.11-2
perl-xml-parser 2.41-3
perl-xml-sax 0.99-3
perl-xml-sax-base 1.08-2
perl-xml-simple 2.20-1
perl-yaml-syck 1.20-2
pgu 0.18-1
phonon 1:4.6.0-2
phonon-gstreamer 4.6.2-1
physfs 2.0.2-2
pidgin 2.10.6-1
pilot-link 0.12.5-3
pinentry 0.8.1-4
pitivi 0.15.2-1
pixman 0.26.2-1
pkg-config 0.27-1
pkgfile 3-1
pkgtools 24-3
pm-quirks 0.20100619-2
pm-utils 1.4.1-5
podofo 0.9.1-3
polipo 1.0.4.1-6
polkit 0.105-1
polkit-gnome 0.105-1
polkit-qt 0.103.0-1
poppler 0.20.2-1
poppler-data 0.4.5-1
poppler-glib 0.20.2-1
poppler-qt 0.20.2-1
popt 1.16-5
portaudio 19_20111121-1
portmidi 217-3
postgresql-libs 9.1.4-1
powertop 2.0-1
ppl 1.0-1
ppp 2.4.5-3
pptpclient 1.7.2-4
printproto 1.0.5-2
prison 1.0-1
procps-ng 3.3.3-3
proj 4.8.0-1
psmisc 22.19-1
pstotext 1.9-2
pth 2.0.7-4
ptlib 2.10.5-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
pv 1.3.4-1
pyalpm 0.5.3-1
pyatspi 2.4.0-1
pygobject-devel 3.2.2-1
pygobject2-devel 2.28.6-6
pygoocanvas 0.14.1-5
pygtk 2.24.0-3
pygtksourceview2 2.10.1-4
pyjamas 0.8-1
pylint 0.25.2-1
pyogg 1.3-7
pyopenssl 0.13-1
pyorbit 2.24.0-4
pypy 1.9-1
pyqt 4.9.4-2
pyqt-common 4.9.4-2
pyrex 0.9.9-3
pyrtf 0.45-5
pyside 1.1.0-1
pyside-tools 0.2.13-5
python 3.2.3-3
python-all-odfpy 0.9.4-2
python-boto 2.4.1-1
python-cairo 1.10.0-1
python-cjson 1.0.5-4
python-dbus 1.1.1-1
python-dbus-common 1.1.1-1
python-decorator 3.3.3-1
python-distribute 0.6.28-1
python-distutils-extra 2.32-1
python-docs 3.2.3-1
python-docutils 0.9.1-1
python-egenix-mx-base 3.2.4-1
python-foolscap 0.6.3-1
python-fpconst 0.7.3-3
python-gnomekeyring 2.32.0-10
python-gnupginterface 0.3.2-6
python-gtop 2.32.0-10
python-imaging 1.1.7-4
python-jinja 2.6-2
python-logilab-astng 0.24.0-1
python-logilab-common 0.58.2-1
python-lxml 2.3.5-1
python-m2crypto 0.21.1-1
python-markupsafe 0.15-1
python-mechanize 0.2.5-2
python-nose 1.1.2-3
python-notify 0.1.1-11
python-numpy 1.6.2-1
python-opengl 3.0.1-4
python-paramiko 1.7.7.1-2
python-pexpect 2.4-1
python-pip 1.1-1
python-pychart 1.39-6
python-pycurl 7.19.0-6
python-pyelftools 0.20-1
python-pyenchant 1.6.5-1
python-pygame 1.9.1-5
python-pygments 1.5-2
python-pyparsing 1.5.6-2
python-pysqlite 2.6.3-2
python-pyzmq 2.2.0-1
python-qscintilla 2.6.2-1
python-qscintilla-common 2.6.2-1
python-reportlab 2.5-2
python-rope 0.9.3-6
python-rsvg 2.32.0-10
python-scipy 0.10.1-1
python-sip 4.13.3-2
python-soappy 0.12.0-10
python-south 0.7.6-1
python-sphinx 1.1.3-2
python-sqlalchemy 0.7.6-1
python-tornado 2.2.1-1
python-wnck 2.32.0-10
python-yaml 3.10-2
python2 2.7.3-2
python2-beautifulsoup3 3.2.1-1
python2-bonobo 2.28.1-8
python2-bsdiff4 1.1.1-1
python2-cairo 1.10.0-1
python2-cherrypy 3.2.2-1
python2-crypto 2.6-2
python2-cssutils 0.9.9-2
python2-dateutil 1.5-2
python2-dbus 1.1.1-1
python2-distribute 0.6.28-1
python2-distutils-extra 2.32-1
python2-dnspython 1.10.0-1
python2-docutils 0.9.1-1
python2-egg 2.25.3-12
python2-gconf 2.28.1-8
python2-gksu2 2.25.3-12
python2-gnomecanvas 2.28.1-8
python2-gnomevfs 2.28.1-8
python2-gobject 3.2.2-1
python2-gobject2 2.28.6-6
python2-gtkhtml2 2.25.3-12
python2-gtkspell 2.25.3-12
python2-html5lib 0.95-1
python2-jinja 2.6-2
python2-libgnome 2.28.1-8
python2-lxml 2.3.5-1
python2-markupsafe 0.15-1
python2-matplotlib 1.1.1-1
python2-nltk 2.0.2-1
python2-nose 1.1.2-3
python2-numpy 1.6.2-1
python2-pip 1.1-1
python2-ply 3.4-1
python2-poppler 0.12.1-7
python2-psycopg2 2.4.5-1
python2-pychm 0.8.4-1
python2-pyenchant 1.6.5-1
python2-pygments 1.5-2
python2-pyopenssl 0.13-1
python2-pyparsing 1.5.6-2
python2-pyqt 4.9.4-2
python2-pytz 2012d-1
python2-pyzmq 2.2.0-1
python2-qscintilla 2.6.2-1
python2-rope 0.9.4-1
python2-sip 4.13.3-2
python2-sphinx 1.1.3-2
python2-sqlalchemy 0.7.6-1
python2-tornado 2.2.1-1
python2-w3lib 1.0-1
python2-xdg 0.23-1
python2-yaml 3.10-2
python2-zope-interface 3.8.0-1
python3-html5lib-hg 1757-1
pywebkitgtk 1.1.8-2
pyxml 0.8.4-9
q4wine 0.121-4
qca 2.0.3-2
qcachegrind 0.7.1-1
qemu-kvm 1.1.1-1
qhull 2012.1-1
qimageblitz 0.0.6-2
qjson 0.7.1-2
qrencode 3.3.1-1
qscintilla 2.6.2-1
qt 4.8.2-3
qt-assistant-compat 4.6.3-2
qt-doc 4.8.2-1
qt3 1:3.3.8b-1
qtcreator 2.5.2-1
qtwebkit 2.2.2-1
qucs 0.0.16-2
r 2.15.1-2
randrproto 1.4.0-1
rapidsvn 0.12.0-5
raptor 2.0.8-1
rar 4.1.1-1
rarcrack 0.2-1
rarian 0.8.1-2
rasqal 1:0.9.29-1
rdesktop 1.7.1-2
readline 6.2.004-1
recode 3.6-7
recoll 1.17.3-1
recordmydesktop 0.3.8.1-6
recordproto 1.14.2-1
redland 1:1.0.15-3
redland-storage-virtuoso 1:1.0.15-3
reiserfsprogs 3.6.21-4
remmina 1.0.0-9
renderproto 0.11.1-2
rest 0.7.12-1
rpcbind 0.2.0-8
rsync 3.0.9-3
rtkit 0.11-1
rtmpdump 2.4-1
ruby 1.9.3_p194-2
ruby-atk 1.1.3-2
ruby-cairo 1.12.2-1
ruby-docs 1.9.3_p194-1
ruby-gdkpixbuf2 1.1.3-2
ruby-gio2 1.1.3-2
ruby-glib2 1.1.3-2
ruby-gtk2 1.1.3-2
ruby-pango 1.1.3-2
ruby-pkgconfig 1.1.3-1
run-parts 4.3.2-1
rygel 0.14.3-1
sage-mathematics 5.2-1
samba 3.6.7-1
sane 1.0.22-9
sbcl 1.0.57-1
scanmem 0.12-2
schroedinger 1.0.11-1
scite 3.2.1-1
scrapy-stable-git 20110925-1
screen 4.0.3-13
screenlets 0.1.6-3
scribus 1.4.1-1
scrnsaverproto 1.2.2-1
scummvm 1.4.1-2
sdl 1.2.15-1
sdl_gfx 2.0.23-1
sdl_image 1.2.12-2
sdl_mixer 1.2.12-1
sdl_net 1.2.8-1
sdl_sound 1.0.3-3
sdl_ttf 2.0.11-2
seabios 1.7.0-1
seahorse 3.4.1-1
sed 4.2.1-4
seed 3.2.0-2
setconf 0.5.2-1
sfml 2.0rc1-2
sg3_utils 1.33-1
shadow 4.1.5.1-1
shared-color-profiles 0.1.5-1
shared-color-targets 0.1.1-1
shared-desktop-ontologies 0.10.0-1
shared-mime-info 1.0-1
shotwell 0.12.3-1
sigil 0.5.902-1
sip 4.13.3-2
sk1libs 0.9.1-3
skype 4.0.0.8-1
skype4pidgin 20110407-1
slang 2.2.4-2
slashem 0.0.7E7F3-2
slim 1.3.4-2
smartmontools 5.43-1
smbclient 3.6.7-1
smpeg 0.4.4-6
smplayer 0.8.0-1
smplayer-themes 20120131-1
sofia-sip 1.12.11-1
soprano 2.8.0-2
sound-juicer 3.4.0-1
sound-theme-freedesktop 0.7-2
soundtouch 1.6.0-1
sox 14.4.0-3
speech-dispatcher 0.7.1-6
speex 1.2rc1-2
splint 3.1.2-3
sqlite 3.7.13-1
sqlite2 2.8.17-5
sqlitebrowser 2.0b1-2
sqliteman 1.2.2-5
startup-notification 0.12-3
strigi 0.7.7-2
stunnel 4.53-2
subversion 1.7.5-2
sudo 1.8.5.p2-1
suitesparse 4.0.2-1
supermeatboy 20120607-16
sushi 0.4.1-2
swftools 0.9.2-1
swig 2.0.7-2
switzerland 0.1.0-2
sysfsutils 2.1.0-8
syslinux 4.05-4
syslog-ng 3.3.5-2
system-config-lvm 1.1.16-1
systemd 188-2
systemd-arch-units 20120704-1
systemd-sysvcompat 188-2
systemd-tools 188-2
systemd-ui-git 20120807-1
t1lib 5.1.2-3
taglib 1.7.2-2
taglib-sharp 2.0.4.0-1
talloc 2.0.7-1
tar 1.26-2
tcl 8.5.12-1
tdb 1.2.9-2
telepathy-farstream 0.4.0-1
telepathy-gabble 0.16.1-1
telepathy-glib 0.18.1-1
telepathy-haze 0.6.0-2
telepathy-idle 0.1.11-1
telepathy-logger 0.4.0-1
telepathy-mission-control 5.12.1-1
telepathy-rakia 0.7.4-1
telepathy-salut 0.8.0-1
terminal 0.4.8-2
tesseract 3.01-3
texi2html 5.0-2
texinfo 4.13a-7
texlive-bibtexextra 2012.26868-1
texlive-bin 2012.0-3
texlive-core 2012.26892-2
texlive-fontsextra 2012.26866-1
texlive-formatsextra 2012.26689-1
texlive-games 2012.26207-1
texlive-genericextra 2012.26700-1
texlive-htmlxml 2012.24013-1
texlive-humanities 2012.25861-1
texlive-langcjk 2012.26777-2
texlive-langcyrillic 2012.26689-1
texlive-langextra 2012.26750-1
texlive-langgreek 2012.26313-1
texlive-latexextra 2012.26807-1
texlive-music 2012.26726-1
texlive-pictures 2012.26791-1
texlive-plainextra 2012.25953-1
texlive-pstricks 2012.26865-1
texlive-publishers 2012.26831-1
texlive-science 2012.26607-1
texmacs 1.0.7.15-1
tftp-hpa 5.2-2
thunar 1.4.0-2
tk 8.5.12-1
tmux 1.6-2
tofrodos 1.7.9-1
tomboy 1.10.2-1
tor 0.2.2.37-1
totem 3.4.3-1
totem-plparser 3.4.2-1
totem-plugin 3.4.3-1
totem-plugin-arte 3.1.1-1
tracker 0.14.2-1
transcode 1.1.7-5
transfig 3.2.5d-1
transmission-gtk 2.61-1
truecrypt 1:7.1a-1
tsocks 1.8beta5-5
ttf-adobe-fangsong 5.004-1
ttf-adobe-fonts 10.1.2-1
ttf-adobe-heiti 5.005-1
ttf-adobe-kaiti 5.004-1
ttf-adobe-song 5.002-1
ttf-arphic-ukai 0.2.20080216.1-3
ttf-arphic-uming 0.2.20080216.1-3
ttf-baekmuk 2.2-7
ttf-bitstream-vera 1.10-8
ttf-cheapskate 2.0-8
ttf-dejavu 2.33-3
ttf-droid 20110417-2
ttf-freebanglafont 20120206-2
ttf-freefont 20120503-1
ttf-indic-otf 0.2-6
ttf-linux-libertine 5.3.0-1
ttf-ms-fonts 2.0-9
ttf-sazanami 20040629-7
ttf-source-sans-pro 1.033-2
ttf-tlwg 0.5.0-1
ttf-ubraille 001.000-6
ttf-vista-fonts 1-5
tumbler 0.1.25-1
twisted 12.1.0-1
tzdata 2012e-1
udisks 1.0.4-4
udisks2 1.94.0-2
uniconvertor 1.1.5-5
unixodbc 2.3.1-1
unpaper 0.4.2-1
unrar 4.2.4-1
unrtf 0.21.2-1
unzip 6.0-6
upower 0.9.17-2
usb_modeswitch 1.2.3-2
usbmuxd 1.0.8-1
usbutils 006-1
util-linux 2.21.2-5
v4l-utils 0.8.8-1
v8 3.9.9-1
vala 0.16.1-1
valgrind 3.8.0-1
vba-m-gtk-svn 1108-1
vbaexpress 1.2-5
vcdimager 0.7.24-2
vde2 2.3.2-1
vdpau-video 0.7.3-3
vi 1:050325-2
vidalia 0.2.20-1
videoproto 2.3.1-2
vim 7.3.600-1
vim-a 2.18-6
vim-bufexplorer 7.2.8-5
vim-buftabs 0.18-1
vim-clang-complete 1.8-1
vim-colorsamplerpack 8.03-3
vim-doxygentoolkit 0.2.13-2
vim-guicolorscheme 1.2-3
vim-minibufexpl 6.4.2-2
vim-project 1.4.1-6
vim-runtime 7.3.600-1
vim-spell-de 20120506-1
vim-spell-en 20120506-1
vim-taglist 45-5
vim-vcscommand 1.99.46-2
vim-workspace 1.0b1-6
vinagre 3.4.2-1
vino 3.4.2-1
virtualbox 4.1.18-5
virtualbox-ext-oracle 4.1.18-1
virtualbox-modules 4.1.18-4
virtualbox-source 4.1.18-5
virtuoso 6.1.6-1
virtuoso-base 6.1.6-1
visualboyadvance 1.7.2-9
vlc 2.0.3-2
vpnc 0.5.3.svn516-3
vte 0.28.2-3
vte-common 0.32.2-1
vte-sharp 2.26.0-8
vte3 0.32.2-1
vulture-nethack 2.3.67-0
warsow 1.0-1
warsow-data 1.0-1
wavpack 4.60.1-2
webkit-sharp 0.3-4
webrtc-audio-processing 0.1-1
weka 3.7.5-1
wesnoth 1.10.3-2
wesnoth-data 1.10.3-1
wget 1.14-1
which 2.20-5
whois 5.0.18-1
widelands 17-3
widelands-data 17-1
wildmidi 0.2.3.5-2
wine 1.5.10-1
wine_gecko 1.7-1
winegame 0.2.0-2
winestuff 0.2.0-2
winetricks 20120308-1
wireless-regdb 2011.04.28-1
wireless_tools 29-6
wireshark-cli 1.8.1-1
wireshark-gtk 1.8.1-1
wnck-sharp 2.26.0-8
wpa_supplicant 1.0-1
wvdial 1.61-4
wvstreams 4.6.1-5
wxgtk 2.8.12.1-3
wxmaxima 12.04.0-1
wxpython 2.8.12.1-3
x264 20120705-1
xapian-core 1.2.12-1
xbitmaps 1.1.1-2
xcb-proto 1.7.1-1
xcb-util 0.3.9-1
xcb-util-keysyms 0.3.9-1
xchat 2.8.8-10
xcursor-themes 1.0.3-2
xdg-user-dirs 0.14-3
xdg-utils 1.1.0-2.20120520
xerces-c 3.1.1-3
xextproto 7.2.1-1
xf86-input-evdev 2.7.3-1
xf86-input-synaptics 1.6.2-1
xf86-video-fbdev 0.4.3-1
xf86-video-nouveau 1.0.1-1
xf86-video-vesa 2.3.2-1
xf86dgaproto 2.1-2
xf86vidmodeproto 2.3.1-2
xfce4-appfinder 4.10.0-1
xfce4-mixer 4.8.0-4
xfce4-panel 4.10.0-1
xfce4-session 4.10.0-3
xfce4-settings 4.10.0-2
xfconf 4.10.0-2
xfdesktop 4.10.0-3
xfsprogs 3.1.8-2
xfwm4 4.10.0-2
xfwm4-themes 4.10.0-1
xine-lib 1.2.2-1
xine-ui 0.99.7-1
xineramaproto 1.2.1-2
xinetd 2.3.15-2
xkeyboard-config 2.6-1
xmind 3.2.1-1
xmldiff 0.6.10-2
xmlto 0.0.25-2
xmlwrapp 0.6.2-2
xorg-bdftopcf 1.0.3-2
xorg-docs 1.7-1
xorg-font-util 1.3.0-1
xorg-font-utils 7.6-3
xorg-fonts-100dpi 1.0.1-4
xorg-fonts-75dpi 1.0.1-4
xorg-fonts-alias 1.0.2-2
xorg-fonts-encodings 1.0.4-3
xorg-fonts-misc 1.0.1-2
xorg-iceauth 1.0.5-1
xorg-luit 1.1.1-1
xorg-mkfontdir 1.0.7-1
xorg-mkfontscale 1.1.0-1
xorg-server 1.12.3.901-1
xorg-server-common 1.12.3.901-1
xorg-server-devel 1.12.3.901-1
xorg-server-utils 7.6-3
xorg-sessreg 1.0.7-1
xorg-setxkbmap 1.3.0-1
xorg-twm 1.0.7-1
xorg-util-macros 1.17-1
xorg-utils 7.6-8
xorg-xauth 1.0.7-1
xorg-xbacklight 1.1.2-3
xorg-xcmsdb 1.0.4-1
xorg-xdpyinfo 1.3.0-1
xorg-xdriinfo 1.0.4-3
xorg-xev 1.2.0-1
xorg-xgamma 1.0.5-1
xorg-xhost 1.0.5-1
xorg-xinit 1.3.2-1
xorg-xinput 1.6.0-1
xorg-xkbcomp 1.2.4-1
xorg-xlsatoms 1.1.1-1
xorg-xlsclients 1.1.2-2
xorg-xmessage 1.0.3-2
xorg-xmodmap 1.0.7-1
xorg-xprop 1.2.1-1
xorg-xrandr 1.3.5-1
xorg-xrdb 1.0.9-2
xorg-xrefresh 1.0.4-3
xorg-xset 1.2.2-1
xorg-xsetroot 1.1.0-3
xorg-xvinfo 1.1.1-3
xorg-xwininfo 1.1.2-1
xpdf 3.03-2
xplc 0.3.13-4
xproto 7.0.23-1
xterm 281-1
xulrunner192 1.9.2.28-3
xvidcore 1.3.2-1
xz 5.0.4-1
yajl 2.0.4-1
yaourt 1.1-1
yasm 1.2.0-2
yelp 3.4.2-1
yelp-xsl 3.4.2-1
zeitgeist 0.9.0.1-1
zenity 3.4.0-1
zeromq 2.2.0-2
zip 3.0-3
zlib 1.2.7-1
zsh 5.0.0-2
zsh-completions-git 20120808-2
zvbi 0.2.33-4
zziplib 0.13.62-1
Here some logs:
% journalctl
Aug 13 20:16:58 Primat systemd-journal[141]: Journal started
Aug 13 20:16:59 Primat systemd-modules-load[149]: Inserted module 'nfs'
Aug 13 20:17:06 Primat vgchange[219]: 3 logical volume(s) in volume group "vg_Primat" now active
Aug 13 20:17:08 Primat mtp-probe[365]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4"
Aug 13 20:17:08 Primat mtp-probe[349]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
Aug 13 20:17:08 Primat mtp-probe[365]: bus: 1, device: 3 was not an MTP device
Aug 13 20:17:08 Primat mtp-probe[349]: bus: 4, device: 2 was not an MTP device
Aug 13 20:17:11 Primat systemd-cryptsetup[439]: Set cipher aes, mode cbc-essiv:sha256, key size 256 bits for device /dev/sda1.
Aug 13 20:17:14 Primat systemd-fsck[437]: /dev/sda2: sauber, 344/122160 Dateien, 288834/487974 Blöcke
Aug 13 20:17:20 Primat mkswap[483]: mkswap: /dev/mapper/swap: warning: don't erase bootbits sectors
Aug 13 20:17:20 Primat mkswap[483]: on whole disk. Use -f to force.
Aug 13 20:17:21 Primat mkswap[483]: Swapbereich Version 1 wird angelegt, Größe = 6265312 KiB
Aug 13 20:17:21 Primat mkswap[483]: kein Label, UUID=cbbb92b0-02cb-46c4-8051-efa98b0669c8
Aug 13 20:17:22 Primat bluetoothd[497]: bluetoothd[497]: Bluetooth daemon 4.101
Aug 13 20:17:21 Primat bluetoothd[497]: Bluetooth daemon 4.101
Aug 13 20:17:22 Primat avahi-daemon[501]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
Aug 13 20:17:22 Primat avahi-daemon[501]: Successfully dropped root privileges.
Aug 13 20:17:22 Primat avahi-daemon[501]: avahi-daemon 0.6.31 starting up.
Aug 13 20:17:22 Primat acpid[505]: starting up with netlink and the input layer
Aug 13 20:17:22 Primat acpid[505]: 4 rules loaded
Aug 13 20:17:22 Primat acpid[505]: waiting for events: event logging is off
Aug 13 20:17:22 Primat /usr/sbin/crond[498]: (CRON) INFO (Syslog will be used instead of sendmail.): Datei oder Verzeichnis nicht gefunden
Aug 13 20:17:22 Primat /usr/sbin/crond[498]: (CRON) INFO (running with inotify support)
Aug 13 20:17:22 Primat smartd[522]: smartd 5.43 2012-06-30 r3573 [x86_64-linux-3.4.8-1-ck] (local build)
Aug 13 20:17:22 Primat smartd[522]: Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
Aug 13 20:17:22 Primat smartd[522]: Opened configuration file /etc/smartd.conf
Aug 13 20:17:22 Primat smartd[522]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], opened
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], SAMSUNG HM320JI, S/N:S16LJD0Q4*****, WWN:5-0f0000-0014*****, FW:2SS00_01, 320 GB
Aug 13 20:17:22 Primat smartd[522]: Device: /dev/sda [SAT], found in smartd database: SAMSUNG SpinPoint M6
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Starting SDP server
Aug 13 20:17:23 Primat bluetoothd[497]: Starting SDP server
Aug 13 20:17:23 Primat avahi-daemon[501]: Successfully called chroot().
Aug 13 20:17:23 Primat avahi-daemon[501]: Successfully dropped remaining capabilities.
Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/sftp-ssh.service.
Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/ssh.service.
Aug 13 20:17:23 Primat avahi-daemon[501]: Loading service file /services/udisks.service.
Aug 13 20:17:23 Primat avahi-daemon[501]: Network interface enumeration completed.
Aug 13 20:17:23 Primat avahi-daemon[501]: Registering HINFO record with values 'X86_64'/'LINUX'.
Aug 13 20:17:23 Primat avahi-daemon[501]: Server startup complete. Host name is Primat.local. Local service cookie is 59663620.
Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/udisks.service) successfully established.
Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/ssh.service) successfully established.
Aug 13 20:17:23 Primat avahi-daemon[501]: Service "Primat" (/services/sftp-ssh.service) successfully established.
Aug 13 20:17:23 Primat systemd-logind[525]: New seat seat0.
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Bluetooth Management interface initialized
Aug 13 20:17:23 Primat bluetoothd[497]: Bluetooth Management interface initialized
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event4 (Power Button)
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event1 (Video Bus)
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event3 (Power Button)
Aug 13 20:17:23 Primat systemd-logind[525]: Watching system buttons on /dev/input/event2 (Lid Switch)
Aug 13 20:17:23 Primat NetworkManager[516]: <info> NetworkManager (version 0.9.4.0) is starting...
Aug 13 20:17:23 Primat NetworkManager[516]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Aug 13 20:17:23 Primat NetworkManager[516]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
Aug 13 20:17:23 Primat dbus-daemon[527]: dbus[527]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Aug 13 20:17:23 Primat dbus[527]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device 6C:9B:02:FD:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device 6C:9B:02:FD:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device 00:1B:DC:04:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device 00:1B:DC:04:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: input-headset driver probe failed for device BC:B1:F3:C8:**:**
Aug 13 20:17:23 Primat bluetoothd[497]: input-headset driver probe failed for device BC:B1:F3:C8:**:**
Aug 13 20:17:23 Primat smartd[522]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Aug 13 20:17:23 Primat smartd[522]: Monitoring 1 ATA and 0 SCSI devices
Aug 13 20:17:23 Primat bluetoothd[497]: bluetoothd[497]: Adapter /org/bluez/497/hci0 has been enabled
Aug 13 20:17:23 Primat bluetoothd[497]: Adapter /org/bluez/497/hci0 has been enabled
Aug 13 20:17:24 Primat smartd[522]: Device: /dev/sda [SAT], previous self-test was interrupted by the host with a reset
Aug 13 20:17:24 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Aug 13 20:17:24 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Aug 13 20:17:24 Primat NetworkManager[516]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Aug 13 20:17:24 Primat NetworkManager[516]: keyfile: parsing *** ...
Aug 13 20:17:25 Primat acpid[505]: client connected from 849[0:0]
Aug 13 20:17:25 Primat acpid[505]: 1 client rule loaded
Aug 13 20:17:27 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Aug 13 20:17:27 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Aug 13 20:17:28 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 13 20:17:28 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Aug 13 20:17:29 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.Accounts'
Aug 13 20:17:29 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.Accounts'
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Aug 13 20:17:29 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Aug 13 20:17:29 Primat console-kit-daemon[887]: missing action
Aug 13 20:17:29 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Aug 13 20:17:29 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Aug 13 20:17:30 Primat systemd-logind[525]: New session 1 of user gdm.
Aug 13 20:17:30 Primat systemd-logind[525]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
Aug 13 20:17:30 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
Aug 13 20:17:30 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.colord-sane' unit='colord-sane.service'
Aug 13 20:17:31 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Aug 13 20:17:31 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Aug 13 20:17:32 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Aug 13 20:17:32 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Aug 13 20:17:32 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.UPower'
Aug 13 20:17:32 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.UPower'
Aug 13 20:17:36 Primat dbus-daemon[527]: dbus[527]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Aug 13 20:17:36 Primat dbus[527]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Aug 13 20:17:36 Primat systemd[1]: Failed to create cgroup cpu:/: No such file or directory
Aug 13 20:17:40 Primat dbus-daemon[527]: dbus[527]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Aug 13 20:17:40 Primat dbus[527]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:17:40 Primat bluetoothd[497]: bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:17:40 Primat bluetoothd[497]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:17:42 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=120 pid=1629 comm="gnome-shell --gdm-mode ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=887 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Aug 13 20:17:42 Primat dbus[527]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=120 pid=1629 comm="gnome-shell --gdm-mode ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=887 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Aug 13 20:18:26 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start timed out.
Aug 13 20:18:26 Primat systemd[1]: Job home.mount/start failed with result 'dependency'.
Aug 13 20:18:26 Primat systemd[1]: Job systemd-fsck@dev-mapper-vg_Primat\x2dlv_Home.service/start failed with result 'dependency'.
Aug 13 20:18:26 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start failed with result 'timeout'.
Aug 13 20:18:38 Primat acpid[505]: client 849[0:0] has disconnected
Aug 13 20:18:52 Primat systemd[1]: NetworkManager.service operation timed out. Terminating.
Aug 13 20:18:52 Primat NetworkManager[516]: <info> caught signal 15, shutting down normally.
Aug 13 20:19:48 Primat acpid[505]: client connected from 849[0:0]
Aug 13 20:19:48 Primat acpid[505]: 1 client rule loaded
Aug 13 20:19:52 Primat acpid[505]: client 849[0:0] has disconnected
Aug 13 20:19:55 Primat acpid[505]: client connected from 849[0:0]
Aug 13 20:19:55 Primat acpid[505]: 1 client rule loaded
Aug 13 20:19:58 Primat systemd-logind[525]: Power key pressed.
Aug 13 20:19:58 Primat systemd-logind[525]: Refusing power-off, user is logged in.
Aug 13 20:19:58 Primat systemd[1]: Job graphical.target/start failed with result 'dependency'.
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Terminating
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:19:58 Primat bluetoothd[497]: Terminating
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSink
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/A2DPSource
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPAG
Aug 13 20:19:58 Primat bluetoothd[497]: Endpoint unregistered: sender=:1.29 path=/MediaEndpoint/HFPHS
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat avahi-daemon[501]: Got SIGTERM, quitting.
Aug 13 20:19:58 Primat acpid[505]: exiting
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat dbus-daemon[527]: dbus[527]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.29" (uid=120 pid=1024 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.1" (uid=0 pid=497 comm="/usr/sbin/bluetoothd -n ")
Aug 13 20:19:58 Primat iptables-flush[1693]: /usr/sbin/iptables
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Stopping SDP server
Aug 13 20:19:58 Primat bluetoothd[497]: bluetoothd[497]: Exit
Aug 13 20:19:58 Primat avahi-daemon[501]: avahi-daemon 0.6.31 exiting.
Aug 13 20:19:58 Primat bluetoothd[497]: Stopping SDP server
Aug 13 20:19:58 Primat bluetoothd[497]: Exit
Aug 13 20:20:10 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start timed out.
Aug 13 20:20:10 Primat systemd[1]: Job systemd-fsck@dev-mapper-vg_Primat\x2dlv_Home.service/start failed with result 'dependency'.
Aug 13 20:20:10 Primat systemd[1]: Job dev-mapper-vg_Primat\x2dlv_Home.device/start failed with result 'timeout'.
Aug 13 20:20:22 Primat systemd[1]: NetworkManager.service stopping timed out (2). Killing.
Aug 13 20:20:22 Primat systemd[1]: Unit NetworkManager.service entered failed state.
Aug 13 20:21:28 Primat systemd[1]: Job dev-mapper-swap.device/stop timed out.
Aug 13 20:21:28 Primat systemd[1]: Job dev-mapper-swap.device/stop failed with result 'timeout'.
Aug 13 20:21:28 Primat systemd[1]: Job dev-disk-by\x2duuid-cbbb92b0\x2d02cb\x2d46c4\x2d8051\x2defa98b0669c8.device/stop timed out.
Aug 13 20:21:28 Primat systemd[1]: Job dev-disk-by\x2duuid-cbbb92b0\x2d02cb\x2d46c4\x2d8051\x2defa98b0669c8.Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead. -
[Solved -sorta] systemd-fsck []: fsck: /sbin/fsck.ext4: execute failed
Greetings.
I am getting the following on boot:
Starting Version 218
A password is required to access the MyStorage volume:
Enter passphrase for /dev/sda3
/dev/mapper/MyStorage-rootvol: clean, 210151/983040 files, 2284613/3932160 block
[ 78.084720] systemd-fsck [280]: fsck: /sbin/fsck.ext4: execute failed: Exec format error
[ 78.085215] systemd-fsck [287]: fsck: /sbin/fsck.ext2: execute failed: Exec format error
I then end up at a login prompt but if I try to login, I get “Login incorrect”. Sometimes Getty will stop and restart on tty1. Then I get returned to the login prompt.
This came about after upgrading with Pacman (which included “upgraded e2fsprogs (1.42.12-1 -> 1.42.12-2)”) a few days ago. Pacman completed successfully but on reboot the system froze forcing a hard reset.
I've booted to a USB and run fsck on the boot partition (the only ext2 partition). Ditto on the root and home volumes. All fine. I've also mounted all three and can access the data.
I would have thought it was something to do with the e2fs upgrade but it obviously scanned the root volume fine and I haven't been able to find any similar reports online.
I've searched online for ideas and I've also searched for logs which might give me some indication of what the cause is but at this point, I've reached my limits.
I'd just nuke the data and start again but I really want to understand what happened here.
Any thoughts on what caused this or suggestions on how to proceed?
Thank you.
Stephen
Last edited by FixedWing (2015-03-16 01:40:20)Head_on_a_Stick wrote:
https://wiki.archlinux.org/index.php/Pa … ond_repair
However, it may be simplest to just re-install in your case -- it depends whether you want to use the troubleshooting & repairing as a learning process or if you just want your system up & running again ASAP...
All fixed and working just like nothing happened.
I did use the advice at the referred link plus a few others on archlinux.org and elsewhere. Yes, an absolutely wonderful learning experience!
I manually reinstalled e2fsprogs. That got Pacman working again and I was able to boot into the system. Then I used Pacman to reinstall e2fsprogs properly plus the other seven packages which were also installed during the same Pacman session despite their being corrupted.
What I really don't get is how Pacman could accept a package with 0 bytes and install it? How could such a package possible pass the security check? When I reinstalled the packages, Pacman of course refused to install the corrupt packages in the cache and deleted them. So why didn't that happen initially? I can only think that a corrupt file in that process terminated prematurely and that Pacman wasn't robust enough to detect this so simply continued on, now skipping the scans and installing the corrupt packages. So just to be sure it wasn't a corrupt file in Pacman itself, I also forced a reinstall of that package as well. I've upgraded packages since without issue so I have to assume that whatever the issue was is now gone.
Anyway, thanx for the help!
Stephen -
Systemd + fsck -- default timeout is not enough
systemd-fsck tries for check my ~ 1 TB ext3 partition, but it fails: machine gets turned off because the check seems to reach some systemd timeouts (despite 15 minutes seems reasonable long for it at first):
-- Reboot --
Dec 09 19:08:52 hostname systemd-journal[169]: Journal stopped
Dec 09 19:08:52 hostname systemd[1]: Shutting down.
Dec 09 19:08:52 hostname systemd[1]: Forcibly powering off as result of failure.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for Network Manager.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for A lightweight DHCP and caching DNS server.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for Login Service.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for Graphical Interface.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for Multi-User System.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for GNOME Display Manager.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for D-Bus System Message Bus.
Dec 09 19:08:52 hostname systemd[1]: Dependency failed for Permit User Sessions.
Dec 09 19:08:52 hostname systemd[1]: Timed out starting Basic System.
Dec 09 19:08:52 hostname systemd[1]: Job basic.target/start timed out.
Dec 09 18:53:53 hostname systemd-fsck[300]: /dev/sdb5 has been mounted 24 times without being checked, check forced.
I failed to google it or find in man pages how to change timeout for basic.target/start -- increasing it looks valid in this particular case. Does anyone know how to do that or has another idea how to get fs checked on boot?being hit by the same issue, does this help?
[root@olivia ~]# systemctl show basic.target | grep Path
FragmentPath=/usr/lib/systemd/system/basic.target
[root@olivia ~]# vi /usr/lib/systemd/system/basic.target
# change 15min to 35min, save and exit
[root@olivia ~]# systemctl daemon-reload -
[SOLVED] How to cancel systemd-fsck during reboot after power failure.
Hello
If power fails (or if I, for any reason, force a physical shutdown ) on my computer, it will display during boot :
systemd-fsck[171] : arch_data was not cleanly unmounted, check forced
And then hangs for a long time (10 minutes ) while checking arch_home partition, wich is a 1T ext4 partition.
then finish the boot.
Sometimes i want this behavior, but i may need to have my computer up and running as fast as possible, and i don't seem to be able to cancel this fsck.
Ctrl+C, or escape have no effect.
How to allow cancelation of system-fsck for this boot, postponing it for the next boot ?
my fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=cfdf8739-d512-4d99-9893-437a6a3c9bf4 LABEL=Arch root
/dev/sda12 / ext4 rw,relatime,data=ordered 0 2
# UUID=98b01aa3-0f7f-4777-a941-8e676a68adce LABEL=Arch boot
/dev/sda11 /boot ext2 rw,relatime 0 2
# UUID=8909c168-5f1e-4ae7-974c-3c681237af7a LABEL=Arch var
/dev/sda13 /var ext4 rw,relatime,data=ordered 0 2
# UUID=a13efc24-cf66-44d0-b26c-5bb5260627a0 LABEL=Arch tmp
/dev/sda14 /tmp ext4 rw,relatime,data=ordered 0 2
# UUID=779aeb69-9360-4df0-af84-da385b7117d1 LABEL=Arch home
/dev/sdb4 /home ext4 rw,relatime,data=ordered 0 2
/dev/sdb5 /home/glow/data ext4 rw,relatime,data=ordered 0 2
Last edited by GloW_on_dub (2013-12-07 16:00:06)Maybe you can add a menu item to the grub boot menu so you can pick it from the menu instead of editing the grub line by hand?
I'm using syslinux, but I can have menu items that only differ in e.g. 'quiet' parameter:
APPEND root=/dev/sda3 rw init=/usr/lib/systemd/systemd quiet
APPEND root=/dev/sda3 rw init=/usr/lib/systemd/systemd
Everything else is the same. -
Systemd-fsck complains that my hardware raid is in use and fail init
Hi all,
I have a hardware raid of two sdd drives. It seems to be properly recongnized everywhere and I can mount it manually and use it without any problem. The issue is that when I add it to the /etc/fstab My system do not start anymore cleanly.
I get the following error( part of the journalctl messages) :
Jan 12 17:16:21 biophys02.phys.tut.fi systemd[1]: Found device /dev/md126p1.
Jan 12 17:16:21 biophys02.phys.tut.fi systemd[1]: Starting File System Check on /dev/md126p1...
Jan 12 17:16:21 biophys02.phys.tut.fi systemd-fsck[523]: /dev/md126p1 is in use. <--------------------- THIS ERROR
Jan 12 17:16:21 biophys02.phys.tut.fi systemd-fsck[523]: e2fsck: Cannot continue, aborting.<----------- THIS ERROR
Jan 12 17:16:21 biophys02.phys.tut.fi systemd-fsck[523]: fsck failed with error code 8.
Jan 12 17:16:21 biophys02.phys.tut.fi systemd-fsck[523]: Ignoring error.
Jan 12 17:16:22 biophys02.phys.tut.fi systemd[1]: Started File System Check on /dev/md126p1.
Jan 12 17:16:22 biophys02.phys.tut.fi systemd[1]: Mounting /home1...
Jan 12 17:16:22 biophys02.phys.tut.fi mount[530]: mount: /dev/md126p1 is already mounted or /home1 busy
Jan 12 17:16:22 biophys02.phys.tut.fi systemd[1]: home1.mount mount process exited, code=exited status=32
Jan 12 17:16:22 biophys02.phys.tut.fi systemd[1]: Failed to mount /home1.
Jan 12 17:16:22 biophys02.phys.tut.fi systemd[1]: Dependency failed for Local File Systems.
Does anybody undersand what is going on. Who is mounting the /dev/md126p1 previous the systemd-fsck. This is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1
UUID=4d9f4374-fe4e-4606-8ee9-53bc410b74b9 / ext4 rw,relatime,data=ordered 0 1
#home raid 0
/dev/md126p1 /home1 ext4 rw,relatime,data=ordered 0 1
The issue is that after the error I'm droped to the emergency mode console and just pressing cantrol+D to continues boots the system and the mount point seems okay. This is the output of 'system show home1.mount':
Id=home1.mount
Names=home1.mount
Requires=systemd-journald.socket [email protected] -.mount
Wants=local-fs-pre.target
BindsTo=dev-md126p1.device
RequiredBy=local-fs.target
WantedBy=dev-md126p1.device
Conflicts=umount.target
Before=umount.target local-fs.target
After=local-fs-pre.target systemd-journald.socket dev-md126p1.device [email protected] -.mount
Description=/home1
LoadState=loaded
ActiveState=active
SubState=mounted
FragmentPath=/run/systemd/generator/home1.mount
SourcePath=/etc/fstab
InactiveExitTimestamp=Sat, 2013-01-12 17:18:27 EET
InactiveExitTimestampMonotonic=130570087
ActiveEnterTimestamp=Sat, 2013-01-12 17:18:27 EET
ActiveEnterTimestampMonotonic=130631572
ActiveExitTimestampMonotonic=0
InactiveEnterTimestamp=Sat, 2013-01-12 17:16:22 EET
InactiveEnterTimestampMonotonic=4976341
CanStart=yes
CanStop=yes
CanReload=yes
CanIsolate=no
StopWhenUnneeded=no
RefuseManualStart=no
RefuseManualStop=no
AllowIsolate=no
DefaultDependencies=no
OnFailureIsolate=no
IgnoreOnIsolate=yes
IgnoreOnSnapshot=no
DefaultControlGroup=name=systemd:/system/home1.mount
ControlGroup=cpu:/system/home1.mount name=systemd:/system/home1.mount
NeedDaemonReload=no
JobTimeoutUSec=0
ConditionTimestamp=Sat, 2013-01-12 17:18:27 EET
ConditionTimestampMonotonic=130543582
ConditionResult=yes
Where=/home1
What=/dev/md126p1
Options=rw,relatime,rw,stripe=64,data=ordered
Type=ext4
TimeoutUSec=1min 30s
ExecMount={ path=/bin/mount ; argv[]=/bin/mount /dev/md126p1 /home1 -t ext4 -o rw,relatime,data=ordered ; ignore_errors=no ; start_time=[Sat, 2013-01-12 17:18:27 EET] ; stop_time=[Sat, 2013-
ControlPID=0
DirectoryMode=0755
Result=success
UMask=0022
LimitCPU=18446744073709551615
LimitFSIZE=18446744073709551615
LimitDATA=18446744073709551615
LimitSTACK=18446744073709551615
LimitCORE=18446744073709551615
LimitRSS=18446744073709551615
LimitNOFILE=4096
LimitAS=18446744073709551615
LimitNPROC=1031306
LimitMEMLOCK=65536
LimitLOCKS=18446744073709551615
LimitSIGPENDING=1031306
LimitMSGQUEUE=819200
LimitNICE=0
LimitRTPRIO=0
LimitRTTIME=18446744073709551615
OOMScoreAdjust=0
Nice=0
IOScheduling=0
CPUSchedulingPolicy=0
CPUSchedulingPriority=0
TimerSlackNSec=50000
CPUSchedulingResetOnFork=no
NonBlocking=no
StandardInput=null
StandardOutput=journal
StandardError=inherit
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
SyslogPriority=30
SyslogLevelPrefix=yes
SecureBits=0
CapabilityBoundingSet=18446744073709551615
MountFlags=0
PrivateTmp=no
PrivateNetwork=no
SameProcessGroup=yes
ControlGroupModify=no
ControlGroupPersistent=no
IgnoreSIGPIPE=yes
NoNewPrivileges=no
KillMode=control-group
KillSignal=15
SendSIGKILL=yes
Last edited by hseara (2013-01-13 19:31:00)Hi Hatter, I'm a little confused about your statement not to use raid right now. I'm new to the Mac, awaiting the imminent delivery of my first Mac Pro Quad core with 1tb RAID10 setup. As far as I know, it's software raid, not the raid card (pricey!). My past understanding about raid10 on any system is that it offers you the best combination for speed and safety (backups) since the drives are a striped and mirrored, one drive dies, quick replacement and you're up and running a ton quicker than if you had gone RAID5 (20 mins writes per 5G data?)Or were you suggesting not to do raid with the raid card..?
I do plan to use an external drive for archival backups of settings, setups etc, because as we all know, if the best fool proof plans can be kicked in the knees by Murhpy.
My rig is destined to be my video editing machine so the combo of Quad core, 4G+ memory and Raid10 should make this quite the machine.. but I'm curious why you wouldn't suggest raid..
And if you could explain this one: I see in the forums a lot of people are running Bootcamp Parralels(sp) which I assume is what you use to run mulitple OS on your Mac systems so that you can run MacOS and Windblows on the same machine.. but why is everyone leaning towards Vista when thems of us on Windblows are trying to avoid it like the plague? I've already dumped Vista from two PCs and installed XP for a quicker less bloated PC. Is vista the only MSOS that will co-exist with Mac systems? Just curious..
Thanks in advance.. Good Holidays -
Hallo,
i have some questions about systemd-fsck output shown in the console during the system boot. it looks like this:
/dev/mapper/vg-root: clean, 82501/1310720 files, 647916/5242880 blocks
systemd-fsck[234]: /dev/sda2: clean, 337/64000 files, 88881/256000 blocks
systemd-fsck[233]: /dev/mapper/vg-home: clean, 30217/5283840 files, 961660/21116928 blocks
systemd-fsck[232]: /dev/mapper/vg-var: clean, 19485/851968 files, 846527/3407872 blocks
systemd-fsck[238]: fsck.fat 3.0.20 (12 Jun 2013)
systemd-fsck[238]: /dev/sda1: 251 files, 3820/403266 clusters
is it actually running any test?
assuming the above shown output means something like "ok" or "there is no problem", i then want to hide it, so i created a file /etc/systemd/system/[email protected]/custom.conf with the content:
# dont show systemd-fsck results in the console, if everything is ok
[Service]
StandardOutput=journal
StandardError=journal+console
this seems to work pretty nice, but there is one line remaining in the console, the very first one about the root partition. it seems somewhat different to the other lines, in that it misses the prefix systemd-fsck and it can't be found by journalctl
how could i hide this first line?
Is it right, that in case systemd-fsck detects any file system error it still would output these on the console because of the setting StandardError=journal+console?When you remove the fsck hook from the initramfs, you aren't hiding the output. Rather the test is not being run. Personally, I think that not running an important check on the integrity of your file systems simply to hide a few lines of output on the console reflects rather weird priorities but obviously that's up to you.
For whatever it is worth, I have had cases in which stuff has gone wrong and fsck has identified the need to look at the file system journal. In every single case, the automated routine has examined, repaired and mounted the file system correctly. It has never prevented booting and I have seen almost no file system corruption with the exception of something on a fat 32 system which is obviously not journalled. Given that my system was for a while routinely shutting off in the dirtiest way possible, I think this reflects the robustness of both the file system and the associated maintenance tools like fsck and I would put up with a great deal more than a few lines of text on the console in exchange for this sort of security. My data is the most important thing on the computer and I will use whatever means are reasonably available to me to protect it.
Of course, if nothing like this has (yet) happened to you, you may not (yet) appreciate the system's robustness. But sooner or later, you almost certainly will. (Unless your data is unimportant to you, of course. That would be different.) -
[SOLVED] Slow boot. Ran systemd-analyze blame.
Issue:
Boot seems snappy, but when I get to the tty login there's a ~35s-1m10s delay before the login completes.
What I've tried:
- Boot with WiFi switch off
- Remove wpa_supplicant
- "Remove" systemd-hostnamed service files (backed them up and restored them when I saw it hadn't helped)
- Add Type=simple to autologin.conf
- Remove autologin.conf
- Disable openvpn
- Disable connman
- Removed some RAM? Success!
$ systemd-analyze blame
1min 9.815s [email protected]
1min 5.556s wpa_supplicant.service
35.248s systemd-hostnamed.service
12.764s [email protected]
7.402s systemd-backlight@backlight:acpi_video0.service
7.394s systemd-backlight@backlight:radeon_bl0.service
7.353s shadow.service
7.189s logrotate.service
6.880s systemd-user-sessions.service
1.267s systemd-logind.service
1.265s connman.service
1.255s chrony.service
1.067s systemd-tmpfiles-clean.service
1.049s alsa-restore.service
914ms systemd-remount-fs.service
860ms dev-hugepages.mount
858ms dev-mqueue.mount
856ms sys-kernel-config.mount
854ms sys-kernel-debug.mount
851ms tmp.mount
755ms systemd-udev-trigger.service
631ms kmod-static-nodes.service
586ms systemd-fsck@dev-disk-by\x2duuid-12636bd2\x2d5d5b\x2d4267\x2d843f\x2db1bbc130e62c.service
282ms systemd-vconsole-setup.service
223ms systemd-random-seed.service
204ms [email protected]
165ms systemd-sysctl.service
158ms boot.mount
147ms systemd-tmpfiles-setup.service
98ms systemd-tmpfiles-setup-dev.service
59ms systemd-update-utmp.service
51ms systemd-udevd.service
12ms connman-vpn.service
3ms systemd-journal-flush.service
1ms [email protected]
Wow! What's going on?
$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @20.574s
└─multi-user.target @20.553s
└─[email protected] @7.768s +12.764s
└─basic.target @7.765s
└─timers.target @7.765s
└─updatedb.timer @7.765s
└─sysinit.target @7.735s
└─systemd-journald.service @1min 42.978s
└─system.slice @1.255s
└─-.slice @1.250s
$ systemctl status user@1000
● [email protected] - User Manager for UID 1000
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: active (running) since Mon 2014-11-03 08:34:13 EST; 6min ago
Main PID: 350 (systemd)
Status: "Startup finished in 35.658s."
CGroup: /user.slice/user-1000.slice/[email protected]
├─350 /usr/lib/systemd/systemd --user
└─351 (sd-pam)
Nov 03 08:33:37 arch2 systemd[350]: pam_unix(systemd-user:session): session opened for user geosmin by (uid=0)
Nov 03 08:34:13 arch2 systemd[1]: Started User Manager for UID 1000.
$ systemctl status wpa_supplicant
● wpa_supplicant.service - WPA supplicant
Loaded: loaded (/usr/lib/systemd/system/wpa_supplicant.service; disabled)
Active: active (running) since Mon 2014-11-03 08:34:13 EST; 8min ago
Main PID: 356 (wpa_supplicant)
CGroup: /system.slice/wpa_supplicant.service
└─356 /usr/bin/wpa_supplicant -u
$ systemctl status systemd-hostnamed
● systemd-hostnamed.service - Hostname Service
Loaded: loaded (/usr/lib/systemd/system/systemd-hostnamed.service; static)
Active: failed (Result: exit-code) since Mon 2014-11-03 08:34:13 EST; 8min ago
Docs: man:systemd-hostnamed.service(8)
man:hostname(5)
man:machine-info(5)
[url]http://www.freedesktop.org/wiki/Software/systemd/hostnamed[/url]
Process: 355 ExecStart=/usr/lib/systemd/systemd-hostnamed (code=exited, status=1/FAILURE)
Main PID: 355 (code=exited, status=1/FAILURE)
Nov 03 08:34:12 arch2 systemd-hostnamed[355]: Failed to register name: Connection timed out
Nov 03 08:34:13 arch2 systemd[1]: systemd-hostnamed.service: main process exited, code=exited, status=1/FAILURE
Nov 03 08:34:13 arch2 systemd[1]: Failed to start Hostname Service.
Any input appreciated.
Last edited by geosmin (2014-11-05 08:16:24)Decided to be reckless and did:
# mv /usr/lib/systemd/systemd-hostnamed /usr/lib/systemd/systemd-hostnamed~
# mv /usr/lib/systemd/system/systemd-hostnamed.service /usr/lib/systemd/system/systemd-hostnamed.service~
Now systemd-analyze blame shows:
50.804s wpa_supplicant.service
50.803s connman-vpn.service
3.367s [email protected]
I have no idea what's going on.
Last edited by geosmin (2014-11-05 07:26:11) -
Windows 8 and ArchLinux dual-boot - Failed to open file: arch\boot\...
Hey!
I have a problem where I don't know how to configure the EFISTUB to boot ArchLinux along Windows 8. I have read the instructions on the wiki and tried for two days and the only thing I've come up with is copying some files into the /boot/efi/EFI/arch/ folder, and adding the entry into the UEFI boot menu. I can select it when Restarting Windows8 through the shift-restart thing and stuff but when it attempts to boot it says:
Failed to open file: arch\boot\archiso.img
I don't know how to set this up and fix it. I am so confused with everything right now due to the instructions on the wiki basically being "You can either do it this way, that way or any other way." but does not specifically expain how each works (at least so that I understand it fully) and what has to be done to complete these steps. Like, I need a complete tutorial from Start to Finish, to do this because I'm too nervous messing up my partitions. I have understood some parts thought and what I want is to be able to boot it from the EFISTUB instead of chain-booting like I usually do. I just don't know how to connect the entry in the list to the proper files to boot the system.
What I have done:
Installed the base system.
Istalled grub in the base system but has not used grub to install on the /boot yet because I don't know if it is to be used if I'm supposed to use the EFISTUB (I was thinking efibootmgr would be enough)
Tried to use efibootmgr to make the entry, but the entry does not work. (If this is how I should do it, can you explain which partition to target and what the different values would mean when answering?)
I don't know which one is right, or if both shall be done (I guess Grub is used if I want to chain-load. I guess I can do it if it's the only way)
Anyway, I hope you guys can answer me so I can fix this. ThanksWhat you're trying to do now is:
EFI->kernel (EFI stub)
This is appealingly direct, but it's tricky to get working. What the wiki now recommends is:
EFI->gummiboot->kernel (EFI stub)
...or...
EFI->GRUB->kernel
These approaches are less direct, but they're easier to configure. The trouble is that both the EFI's built-in boot manager and the EFI stub loader are tricky to configure. For a newbie to get them both configured correctly on a first attempt at installing Arch is very difficult. Getting the EFI to launch gummiboot or GRUB is easier because these programs don't require the complex parameters that the EFI stub loader requires. Those parameters can instead be specified in the gummiboot or GRUB configuration file, which is easier to manage for quite a few reasons.
If you want to pursue using the EFI stub loader directly, you certainly can. I've learned from experience, though, that it's not worth my time to try to help with users who want to do this. Using an intermediary program is easier to get working. IMHO, the direct approach has no real benefits except that it gives you bragging rights that you've done it. Your system won't boot any faster or more reliably in the more direct approach. (Well, technically it will be faster, by only by a matter of milliseconds, assuming you use a 0 timeout value in gummiboot.) In fact, it will be less reliable, because gummiboot, GRUB, and rEFInd all offer ways to adjust boot options on a boot-by-boot basis, which is very helpful when fixing problems. You can't do this with the direct approach. -
Systemd-fsck Message, but alt-ctrl F2 login works
When I start archlnux I receive the message
systemd-fsck fsck.btrfs not found
error 2 while executing fsck.btrfs for /dev/sda7
The screen remains at this message
However using alt-ctrl F2 I can login without any problems.Ah, so you use btrfs as file system for /dev/sda7 ? Well I never tried that before, seems to be rather new. Did you read the Btrfs page in the ArchWiki? My guess would be,that the fsck tool for this file system is containend in btrfs-progs .
-
booting in single user mode to trouble shoot grey screen the boot stops at "CODE SIGNING .......... clearing CS_VALID" - cannot command C past - just stuck
Hi opjml0,
Welcome to the Apple Support Communities!
If your Macbook is starting up to the gray screen, I suggest the steps in the following article.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe
Maybe you are looking for
-
Scrolling and zoom in and out does not respond with touch pad gestures
I have Just installed Firefox today not even an hour ago and already I've closed it at least 15 times reset it started it in safe mode and checked all my settings that have been tinkered with. I have: Windows 7 (64-bit) Dell XPS Laptop and No mouse,
-
Boot Camp Mac Book Pro Can Boot to Win 8.1 but not Mavericks
My Mac Book Pro Mavericks partition is damaged and I cannot boot to it, I can boot to Windows 8.1 without any issues. Disk repair did not fix the problem, any suggestions? I also tried using Migration Assistant to from my iMac to the Mac Book pr
-
T400 audio is sometimes distorted/grainy...
My T400 is pretty good, except that every so often, the sound goes suddenly distorted, or sounds as if there were a loose wire in the chain... the sound just BREAKS up and starts being unstable. This will go away sometimes when I reboot. This will go
-
No sound output, video freezes?
My daughter's original Macbook Air recently stopped outputting sound except thru USB speakers and strangely video will only play for a few seconds before freezing. Sound preference pane shows no output device unless you plug in USB speakers thru wh
-
SunFire V490: Exactly what features are "Not supported"?
Hello, I saw the system matrix state that "Not all features are supported for the Sun Fire V490 Server". Does anyone know exactly what features are, or are not supported on the V490?