Archive an Activity document using Status
HI All,
In my project we are creating segmentation based on the activity created date. We generate call list of all customers who has an activity document.if the activity status is set to cancelled the system should not select the document when creating the segmentation based on activity created date.
with regards,
Selvam T
Hi Lashan,
This error is mostly related to ADS configuration.
Refer below thread to confirm the same.
http://scn.sap.com/thread/3504365
Regards,
Ravi
Similar Messages
-
I try to 'Print booklet' and receive an eror that "the active document uses multiple page sizes..." but all the pages on my document are in the same size (as far as I know)
How can I deal with this eror?This seems to be a bug, and so far the only workaround I know is to copy/paste everything into a new file.
-
All text and graphics appear within the constraints of the margins. All pages show the same size according to the rulers.
Let me confess I do not understand the workings of the master pages. I had to create master pages from my document to get them to show up. I have a [none] master that shows up, the rest are my content.
Here's a screen cap of my pages panel: -
How to get the active document file name using illustrator CS2 plugin code?
I wanna take file name from active document using illustrator plugin CS2. Plz anybody help me..
Thanks in advance..AIDocumentSuite::GetDocumentFileSpecification() should get you that information. Note that it will only work properly if you've already saved the document (or opened it from a file). I'm not sure what the result looks like if you're calling that on a new, unsaved file.
-
How to Select the Document just back of the Active Document
If there are 5 documents open in photoshop I want to select the document just behind or back of the Active Document , using script.
One of my friend suggested me the bleow script, but it is selecting the previous document, not exactly the document back of the active document.
please help me.
var id85 = charIDToTypeID( "slct" );
var desc21 = new ActionDescriptor();
var id86 = charIDToTypeID( "null" );
var ref11 = new ActionReference();
var id87 = charIDToTypeID( "Dcmn" );
ref11.putOffset( id87, -1 );
desc21.putReference( id86, ref11 );
executeAction( id85, desc21, DialogModes.NO )I had the same problem. I did not want to go back to the "last viewed" doc but to the doc opened before the active one.
I use this on F1 key to go back to the previous opened document (index order -1).
It works great.
#target photoshop
// Go back to the last opened doc. If it is the oldest opened one it does not give error window and stays on it.
if(documents.length>0) {
var thisIndexImage = getActiveDocumentIndex();
var theDocs = app.documents;
if ( thisIndexImage != 0 ) {
var openedBefore = theDocs[thisIndexImage - 1];
} else {
var openedBefore = theDocs[0];
app.activeDocument = openedBefore;
} else {
alert ("You need to have any opened documents to apply this script.")
// Functions
function getActiveDocumentIndex(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
return desc = executeActionGet(ref).getInteger(stringIDToTypeID('itemIndex'))-1; -
How can I rip a 10" x 10" post script file from InDesign 6, it keeps telling me "the active document uses multiple pages sizes and won't print. My page sizes are all 10" x 10"
Please post in the InDesign forums here http://forums.adobe.com/community/indesign/indesign_general. They will be able to help you.
-
Flash CC won't let me switch between open documents using command and tilde key ( ~ )
In all previous versions of Flash, and most other Adobe software, you could change the active document using command and tilde key ( ~ ) on a Mac. However Flash CC won't let me do this. Is there a bug, or something I need to set up to get it to work? Or is this possibly just expected behavior in the new version of Flash?
I'm on a 2012 desktop with OS X 10.8.4 using a bluetooth keyboard. Cmd + ~ works with all other Adobe programs I have installed including Flash CS5.5.
-
Reloading of Archived Sales Activity in SAP database
Hello Everyone,
I have a query regarding reloading of Archived Sales Activity document.
Suppose I archive a Sales Activity (SD_VBKA) through SARA in my external Storage system and then delete it. An archive key will be generated.
After that i reload ithe data again in Database and then again rearchive it. So a new Archive key is generated.
And if i try to read it, i am unable to read it as it is pointing to the original first archive Session and not the newer one.
Please help me on that. How can i now read this archived Sessiion
Edited by: Suruchi Razdan on Jul 29, 2011 8:41 AMDear Gayathri,
Please be aware that you have opened the question two times, please close this one from your side!
Regards,
Gerhard (Moderator) -
I have a new iMac running OS 10.9. When I use the Command S shortcut in any of my apps (numbers, text edit etc), it no longer saves the active document it speaks it instead. How can I revert to the save shortcut function?
have you looked in
system preference->Dictiation & speech if it's assigned there?
or system preference->accessibility if it's assigned there? -
Do you know a short cut to active a type over in a document using MSWord
I want to type over the characters in a document using the Apple wireless keyboard. I'm just converting from a pC
You can drag the "Site Identity Button" (globe/padlock) on the left hand side of the location bar onto the desktop to create a shortcut.
You can also use an extension.
* Deskcut: https://addons.mozilla.org/firefox/addon/deskcut/ -
Reversing a document using the bapi 'BAPI_ACC_DOCUMENT_REV_POST'
Hi All,
I have posted a document using the FM 'BAPI_ACC_DOCUMENT_POST' and it is working fine .
How can I reverse the same posted document using the FM
'BAPI_ACC_DOCUMENT_REV_POST'?
What are the mandatory parameters to be filled?
Can anyone explain me with a example
Thanks in Advance.Hi Siva,
The bapi you have mentioned is the correct one.
Look at the BAPI documentation which is pretty informative.
In case you don't have it, i'm just copy pasting it.
Functionality
Reversing an external document in Accounting. (negative posting)
The method "Reverse" can be used to reverse the relevant document in the accounting components.
Parameters
REVERSAL
Reference information for reversal in Accounting
Description
Parameter for transferring a reversal document. The reversal document for the source document is not transferred - the reversal documents are generated in the individual components from the documents to be reversed. This is only possible however, if the corresponding documents are available, meaning that line item update is active in all components and no documents have been archived. If this is not the case, an appropriate error message is issued in the return parameter. If this happens, the document can only be reset by means of a corresponding inverse posting by the sender.
You must make entries in the following fields
Reversal document number:
OBJ_TYPE Sender ID
OBJ_KEY Reference number of the reversal document (source document)
OBJ_SYS Logical system
OBJ_KEY_R Reference number of the document to be reversed.
Default
All other fields are transferred from the FI document to be reversed.
BUS_ACT
Business Transaction
Description
To reverse the document, the same business transaction must be entered that was used for the posting.
OBJ_TYPE
Reference procedure
Source document
Description
When a business transaction is updated in Accounting, it may be that several documents are updated at the same time (FI document, CO document, etc). If the business transaction is not initiated in Accounting, a source document must exist outside Accounting. The information from this document must be transferred when the FI/CO interface is called up. The source information is updated in all accounting documents, and is made up of the following fields:
AWTYP (OBJ_TYPE) Reference transaction
Sender ID
AWKEY (OBJ_KEY) Reference key
Source document number
The reference key is made up of:
AWREF Reference document number (10 digits)
Source document number
AWORG Reference organizational unit (10 digits)
Number range ID (if required)
AWSYS (OBJ_SYS) Logical system
Logical system of source document
When the document is being processed, the system checks whether a reference document number (first part of the reference key) has been transferred.
Notes
Use a separate value in the OBJ_TYPE field (reference transaction). You must maintain an entry for this value in table TTYP, which could be a function module that is called when the user wants to branch back to the source/sender document from an accounting document. This makes it possible for documents updated using BAPIs to be included in the document navigation (revision). If you use SAP defined characters in the field OBJ_TYPE, errors can occur in the navigation.
The FI and CO line item suppression is defined separately for each reference transaction.
It is not necessary to separate the reference key into reference document number and reference organizational unit. This means that reference document numbers that are longer than 10 digits can be transferred into the reference key.
OBJ_KEY
Reference Key
Source document
Description
When a business transaction is updated in Accounting, it may be that several documents are updated at the same time (FI document, CO document, etc). If the business transaction is not initiated in Accounting, a source document must exist outside Accounting. The information from this document must be transferred when the FI/CO interface is called up. The source information is updated in all accounting documents, and is made up of the following fields:
OBJ_SYS
Logical system of source document
Source document
Description
When a business transaction is updated in Accounting, it may be that several documents are updated at the same time (FI document, CO document, etc). If the business transaction is not initiated in Accounting, a source document must exist outside Accounting. The information from this document must be transferred when the FI/CO interface is called up. The source information is updated in all accounting documents, and is made up of the following fields:
AWTYP (OBJ_TYPE) Reference transaction
RETURN
Return Parameter
Description
This table contains the return messages from the method call.
Value range
The first message contains the general status of processing:
Type ID Number Message
S RW 605 Document posted successfully
S RW 614 Document check without errors
A RW 609 Error in document
The fields MESSAGE_V1, MESSAGE_V2 and MESSAGE_V3 contain the following information:
Reference transaction ( OBJ_TYPE)
Reference key ( OBJ_KEY)
Logical system of source document ( OBJ_SYS)
Additional messages are transferred with the following information:
Parameter ( PARAMETER)
Row ( ROW)
Field ( FIELD)
in which the error occurred.
REgards.
Ravi -
Suggestion: Invert shading that reflects active document tab
It's a pretty minor thing, but I'd suggest flipping how you distinguish between the active document tab vs the inactive ones when using the dark interface. I can get the logic of having the brightest tab representing the one you're actually working on, but for some reason I keep clicking the wrong tab when I want to switch between documents - it took me a little bit to work out why: you represent the active tool by shading it darker and recessing it slightly, so it should make sense that the active tab is also the one that is darker and appears recessed, otherwise I'm trying to hold two representations of status in my mind that are exactly oposite to each other, yet located very close to each other on the screen. And unless I'm very precisely caffeinated, I'm just not equipped to deal with that sort of contradiction.
Contact Sheet is a welcome return. So many features can be adapted. I made this a few years ago by sizing up 40 images, and turning off titles, and ‘Flatten Layers’ when making the contact sheet. It was then fairly simple to FT each layer to give some overlap, and use Layer masks for creative affect.
It was eventually incorperated into a poster for the organisation running the event.
Some interesting JDIs (thanks so much for the typed list!).
The Eye dropper changes appeal to me, and Ctrl J now working on Groups is very welcome. Lots more there, but what worries me is that there are apparently twice as many new JDIs in CS6 as there were in CS5, which makes me think I must be missing a lot of the CS5 JDIs. is there a list somewhere? -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
How to get the filename of the current active document in InDesign CS4?
Hi,
If I open a document from File->Open, I can get the document's file name using IOpenedFileInfo->GetOpenedFilePath().
But, if I create a new document and perform File->SaveAs, GetOpenedFilePath is returning invalid IDFile reference.
What is the right way to get the active document's file name?
Thanks,
VSPYou can try this:
IDatabse * db = ::GetDatabase(theDoc);
IDFile * sysFile = db->GetSysFile();
PMString docName = sysFile->GetFileName();
Good luck -
Problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2
Hi experts,
I'm getting problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2.
I have a scenario where is defined the document type ZC1, document part 200, authorization group 0002 and for all of these documents the storage category "Cofre DMS1". And the status which demands the storage category is 'FR'.
I've been fullfiling the BAPI_DOCUMENT_CREATE2 in this way:
"Tables
data: it_doc like bapi_doc_draw2,
it_return like bapiret2,
it_files like bapi_doc_files2 occurs 0 with header line,
it_objs like bapi_doc_drad occurs 0 with header line.
"Variables
data: wl_doctype like bapi_doc_draw2-documenttype,
wl_docnumber like bapi_doc_draw2-documentnumber,
wl_docpart like bapi_doc_draw2-documentpart,
wl_docversion like bapi_doc_draw2-documentversion.
it_doc-documenttype = 'ZC1'.
it_doc-documentpart = '200'.
it_doc-documentversion = '00'.
it_doc-description = 'Test of documents creation via BAPI'.
it_doc-username = sy-uname.
it_doc-statusextern = 'FR'.
it_doc-authoritygroup = '0002'.
refresh it_files[].
clear it_files.
it_files-originaltype = '1'.
it_files-storagecategory = 'Cofre DMS1'.
it_files-wsapplication = 'PDF'.
it_files-docfile = 'c:\110307.pdf'.
it_files-description = 'Test file'.
append it_files.
refresh it_objs[].
clear it_objs.
it_objs-objecttype = 'EKPO'.
it_objs-objectkey = '47000497600010'.
append it_objs.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = it_doc
IMPORTING
documenttype = wl_doctype
documentnumber = wl_docnumber
documentpart = wl_docpart
documentversion = wl_docversion
return = it_return
TABLES
objectlinks = it_objs
documentfiles = it_files.
After execute the BAPI process I got the following error:
E26 087 - Data carrier COFRE DMS1 not defined
Does anybody have a sugestion to help me, please?
Thks
David
Edited by: David Tsutsui on Mar 18, 2010 10:52 AMPlease refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
Data Carriers for Storage the Originals of DMS
Maybe you are looking for
-
Tracking Vendor IP address?
Is it possible to track and store the IP address used by a vendor to log into the SRM Portal? Thank you in advance for your help.
-
I have installed Windows 7 and upgraded to Bootcamp 3.1. I booted back into Mac OS and then I attempted to boot back into Windows where I got the dreaded "Missing OS". Before anyone tells me to hit "option" or "shift" or "command" key to select an OS
-
I'm a Design faculty. I'm using iPad in my classrooms. Sometimes, I need to mail certain files. Often they are resume of students. Now the problem is that, in mail you can not attach file/files. Rather you have to open the file/document/pic and send
-
How can register logic study if my iMac is not connected to the internet?
-
no extra details. duplicate of https://support.mozilla.com/en-US/questions/900782