Archive Backup Failure in Quality Server

Hello Guru's
Since morning archive backup failure in our quality server.
I am attaching log  for your reference, Please guide us to resolve this issue
BR0002I BRARCHIVE 6.40 (50)                                                                               
BR0006I Start of offline redo log processing: aeardegy.svd 2009-05-28 07.08.28                                                  
BR0484I BRARCHIVE log file: /oracle/QBS/saparch/aeardegy.svd                                                                    
BR0252W Function remove() failed for '/oracle/QBS/920_64/dbs/sap.ora' at location BrInitOraCreate-1                             
BR0253W errno 13: Permission denied                                                                               
BR0252W Function fopen() failed for '/oracle/QBS/920_64/dbs/initQBS.ora' at location BrInitOraCopy-2                            
BR0253W errno 13: Permission denied                                                                               
BR0101I Parameters                                                                               
Name                           Value                                                                               
oracle_sid                     QBS                                                                               
oracle_home                    /oracle/QBS/920_64                                                                               
oracle_profile                 /oracle/QBS/920_64/dbs/initQBS.ora                                                               
sapdata_home                   /oracle/QBS                                                                               
sap_profile                    /oracle/QBS/920_64/dbs/initQBS.sap                                                               
backup_dev_type                util_file                                                                               
util_par_file                  /oracle/QBS/920_64/dbs/initQBS.utl                                                               
archive_dupl_del               only                                                                               
system_info                    oraqbs/oracbs bascop08 AIX 3 5 00396F7C4C00                                                      
oracle_info                    QBS 9.2.0.7.0 8192 423 5563906655                                                                
sap_info                       640 SAPR3 QBS W1421187153 R3_ORA 0020121351                                                      
make_info                      rs6000_64 OCI_920 Oct 11 2008                                                                    
command_line                   brarchive -u system/******** -c -d util_file -sd                                                 
BR0252E Function fopen() failed for '/oracle/QBS/saparch/archQBS.log' at location arch_last_get-1                               
BR0253E errno 13: Permission denied                                                                               
BR0016I 0 offline redo log files processed, total size 0.000 MB                                                                 
BR0252W Function fopen() failed for '/oracle/QBS/saparch/archQBS.log' at location BrCleanup-8                                   
BR0253W errno 13: Permission denied                                                                               
BR0121W Processing of log file /oracle/QBS/saparch/archQBS.log failed                                                           
BR0007I End of offline redo log processing: aeardegy.svd 2009-05-28 07.08.29                                                    
BR0280I BRARCHIVE time stamp: 2009-05-28 07.08.29                                                                               
BR0005I BRARCHIVE terminated with errors                                                                               
Thanks & Regards
Shishir

Hello Shishir,
It looks as if the issue is with the permissions of saparch directory,
Check the permissions of oracle/QBS/saparch/archQBS and /oracle/QBS/920_64 oracle_profile /oracle/QBS/920_64/dbs/initQBS.ora  directories and compare with the production server
Also make sure that initQBS.ora is present in the location specified
Rohit

Similar Messages

  • Quality server  creshed

    hi
    my Quality server has been creshed , i have only online backup 17.08.2009 , i have a archive  backup till date , can i retore the all  database ,  if yes  ,please advise , how can i restore the data .
    venkat

    Hi
    Its very simple if your database is Oracle. Just use BRTOOLS from OS command prompt.
    BRTOOLS will do everything for you.
    Just follow the link
    http://help.sap.com/saphelp_nw70/helpdata/en/65/96f1e4a6974512962197918624e1c5/frameset.htm
    Edited by: Anindya Bose on Aug 7, 2009 5:23 PM

  • SnapshotDB failed for archive backup

    hi!
    one server i manage had a power failure. now when i try to start the calendar service i get this error:
    20070528154729 - 1 Fatal Error: SnapshotDB failed for archive backup at /var/opt/SUNWics5/csdb/archive/archive_20070528
    20070528154729 - csstoredExit: Exiting with [-1].the whole log:
    20070528154726 -   caldb.berkeleydb.homedir.path  = /var/opt/SUNWics5/csdb
    20070528154726 -   caldb.berkeleydb.archive.path  = /var/opt/SUNWics5/csdb/archive
    20070528154726 -   caldb.berkeleydb.hotbackup.path  = /var/opt/SUNWics5/csdb/hotbackup
    20070528154726 -   caldb.berkeleydb.archive.enable  = 1
    20070528154726 -   caldb.berkeleydb.hotbackup.enable  = 1
    20070528154726 -   caldb.berkeleydb.hotbackup.mindays  = 3
    20070528154726 -   caldb.berkeleydb.hotbackup.maxdays  = 6
    20070528154726 -   caldb.berkeleydb.hotbackup.threshold  = 70
    20070528154726 -   caldb.berkeleydb.archive.mindays  = 3
    20070528154726 -   caldb.berkeleydb.archive.maxdays  = 6
    20070528154726 -   caldb.berkeleydb.archive.threshold  = 70
    20070528154726 -   caldb.berkeleydb.circularlogging  = no
    20070528154726 -   caldb.berkeleydb.archive.interval  = 120
    20070528154726 -   alarm.msgalarmnoticercpt  = [email protected]
    20070528154726 -   service.admin.sleeptime  = 2
    20070528154726 -   local.serveruid  = icsuser
    20070528154726 -   local.hostname  = jespre.dominio.local
    20070528154726 -   service.http.calendarhostname  = jespre.dominio.local
    20070528154726 - Reading configuration file - Done
    csstored is started
    Calendar service(s) were started
    20070528154728 - Notice: Store Archiving is Enabled
    20070528154728 - Notice: Hot Backup is Enabled
    20070528154728 -   WARNING: Removing directory [archive_20061102] from [/var/opt/SUNWics5/csdb/archive] according to system settings.
    20070528154728 -            In backup directory [/var/opt/SUNWics5/csdb/archive] we had [6] days worth of backup
    20070528154728 -            According to the system settings, we must keep between [3] and [6] days of backup
    20070528154728 -            We now have [5] days of backup in [/var/opt/SUNWics5/csdb/archive]
    20070528154728 - Creating directory [/var/opt/SUNWics5/csdb/archive/archive_20070528] 20070528154728 - ... success
    20070528154729 - Checking condition for [/var/opt/SUNWics5/csdb/archive], threshold [70], DB [257031]KB
    20070528154729 - Hotbackup on [/var/opt/SUNWics5/csdb/hotbackup] mounted on [/dev/dsk/c0d0s6]
    20070528154729 - Archivebackup on [/var/opt/SUNWics5/csdb/archive] mounted on [/dev/dsk/c0d0s6]
    20070528154729 - Checking condition for [/var/opt/SUNWics5/csdb/archive], threshold [70], DB [257031]KB
    20070528154729 - Hotbackup on [/var/opt/SUNWics5/csdb/hotbackup] mounted on [/dev/dsk/c0d0s6]
    20070528154729 - Archivebackup on [/var/opt/SUNWics5/csdb/archive] mounted on [/dev/dsk/c0d0s6]
    20070528154729 - SnapshotDB: Creating archive copy at /var/opt/SUNWics5/csdb/archive/archive_20070528
    20070528154729 - Run CheckpointDB prior to backing up the database files
    20070528154729 -        Running CheckpointDB: /opt/SUNWics5/cal/lib/../tools/unsupported/bin/db_checkpoint -1 -h /var/opt/SUNWics5/csdb 2> /tmp/csstored.checkpoint.out
    20070528154729 -        Running CheckpointDB: /opt/SUNWics5/cal/lib/../tools/unsupported/bin/db_checkpoint -1 -h /var/opt/SUNWics5/csdb 2> /tmp/csstored.checkpoint.out
    20070528154729 - Copying database files to /var/opt/SUNWics5/csdb/archive/archive_20070528
    20070528154729 -        Copying database file ics50alarms.db to /var/opt/SUNWics5/csdb/archive/archive_20070528
    20070528154729 - SnapshotDB - Copy failed to /var/opt/SUNWics5/csdb/archive/archive_20070528 for ics50alarms.db
    20070528154729 - 1 Fatal Error: SnapshotDB failed for archive backup at /var/opt/SUNWics5/csdb/archive/archive_20070528
    20070528154729 - csstoredExit: Exiting with [-1].any hint?

    long time ago, in a galaxy far away...
    i discovered that csstored.pl doesn't play very well with spanish locale (not sure with other locale).
    if i launch /opt/SUNWics5/cal/sbin/start-cal with this locale
    LANG=es_ES.UTF-8
    LC_CTYPE=es_ES.UTF-8
    LC_NUMERIC=es_ES.UTF-8
    LC_TIME="es_ES.UTF-8"
    LC_COLLATE=es_ES.UTF-8
    LC_MONETARY=es_ES.UTF-8
    LC_MESSAGES=es.UTF-8
    LC_ALL=
    i get the error described before. the i just reset LANG and LC_ALL to C and all goes well.
    thanks to truss for the inspiration.

  • Windows SBS 2011 Standard - Windows Image Backup Failure VSS Erros

    Hello,
    I was wondering if someone could point me in the right direction regarding a SBS backup failure on 2011. It seems i'm currently getting the typical 
    "Volume Shadow Copy Service error: Failed resolving account spsearch with status 1376. Check connection to domain controller and VssAccessControl registry key. 
    Operation:
       Gather writers' status
       Executing Asynchronous Operation
    Context:
       Current State: GatherWriterStatus
    Error-specific details:
       Error: NetLocalGroupGetMemebers(spsearch), 0x80070560, The specified local group does not exist."
    But i have gone through many different pages regard's to fix's and nothing of the sort has resolved my issue yet. I get an error in the application logs informing me:
    The backup operation that started at '‎' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and
    then rerun the backup operation once the issue is resolved.
    I have made the change in which to change the reg entry's for the spfarm and spsearch are set to "0" and added the vssregistrygroup group with entry of 1.
    I have drawn up a list of VSSadmin List Writers and the system writer is showing the following.
    Writer name: 'System Writer'
      Writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
      Writer Instance ID: {b3d9ec72-b1a7-4557-b3b5-dafe1f97b8f2}
      State: [5] Waiting for completion
      Last Error: No Error
    I can see the SQL server writer is showing Failed and Non-retryable error? i have rebooted the server twice now after making changes but nothing seems to be working? anyone with any ideas? if you need more information then please let me know! kinda getting
    stuck for ideas.
    Regards
    Mike

    Thanks for the reply Justin
    I have gone through our list and i can confirm the following.
    did you install any third-party backup utility
    on the SBS 2011? Or just use Windows Server Backup?
     Its just windows server backup, not 3rd party backup software installed on the server.
    Did you mean that set Data of spfarm and spsearch to
    0 via following path?
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VSS\VssAccessControl
    <Domain>\
    spfarm = dword: 0x00000001(1)
    <Domain>\
    spsearch = dword: 0x00000001(1)
    Yes this is correct the both have been set to "0" while <domain>\VSSRegistryGroup and NT Authority\NetworkService both have Dword value of "1"
    Did you right click on VSSAccessControl, select “Permissions…”, then add backup account and give it Full Control? Meanwhile, please check if
    Administrators group is owner of this key.
    In response to this, i have Administrators as the owner of the folder, but when you mean "add backup account" which specific account are you referring to?
    Did you set the Startup type as Automatic and restart the service? Any find?
    Yep this service is set to Automatic but every time i try and start it, it comes up with:
    the sharepoint 2010 vss writer service on local computer started and then stopped. Some services stop automatically
    if they are not in use by other services or programs.
    Any feedback would be great.
    Thanks
    Mike

  • Need client copy of production server in quality server

    Hi,
    I need the client copy of production server with application data in quality server. How i do this?
    Main purpose is we have no data in quality server in testing purpose.  if we configure the client of production server in Quality, we can test it by our requirement.
    Regards
    Somu

    Try this
    Preparatory steps in source SAP system
    1 Take the trace of control file in the source system using the following command at SQL prompt as below:
    SQL>alter database backup controlfile to trace;
    The trace file can be found in the location <drive>\Oracle\<SID>\saptrace\usertrace.
    2. Open the file with notepad and save a copy as controlsrc.txt
    3. Stop the SAP
    4 Shutdown the database from SQL prompt.
    5. Take backup of database files.
    6. Start SAP
    Steps in the Target system
    7. Install SAP system with <TGTSID>
    8. Stop the SAP.
    9. Shutdown the database from SQL prompt.
    10. Take the backup of database files.
    11. Edit controlfilesrc.txt with regard to the locations of datafiles of source system to be placed in target system taking in to account the space available in different drives and save as control.sql. Also SET DATABASE u201C<TGTSID>u201D RESETLOGS.
    12. Replace the database files with source systems database files conforming to the control.sql
    13. Start the database in nomount state from SQL prompt as below.
    SQL>startup nomount
    14. Run the control.sql script as follows:
    SQL>@@<location of directory>\control.sql.
    Once the script runs successfully, the database will be in mount state
    15. Open the database with resetlogs option as follow:
    SQL>alter database open resetlogs;
    16. Create OPS$ users of source system conforming to target system conventions in database.
    17 Set the environment variable dbs_ora_schema to SAP<SRCSID> as the owner of the database objects will still be as SAP<SRCSID>..
    18. Start SAP.
    Lalit Kumar

  • Taking rman backup from a different server

    HI Al,
    Is it possible for us run the rman backup from a different server other than the server on which database exist .
    For Ex :
    Our database is on server X
    But , I want to schedulde the archive backup from the server Y .
    How can we do this and is it possible ...
    Regds
    Rahul Gupta

    Yes, as long the RMAN executable is compatible to the target database, on metalink:
    RMAN Compatibility Matrix
    Doc ID: 73431.1
    rman sys/<password>@<connect_string>
    Werner

  • Log file sync  during RMAN archive backup

    Hi,
    I have a small question. I hope someone can answer it.
    Our database(cluster) needs to have a response within 0.5 seconds. Most of the time it works, except when the RMAN backup is running.
    During the week we run one time a full backup, every weekday one incremental backup, every hour a controlfile backup and every 15 minutes an archival backup.
    During a backup reponse time can be much longer then this 0.5 seconds.
    Below an typical example of responsetime.
    EVENT: log file sync
    WAIT_CLASS: Commit
    TIME_WAITED: 10,774
    It is obvious that it takes very long to get a commit. This is in seconds. As you can see this is long. It is clearly related to the RMAN backup since this kind of responsetime comes up when the backup is running.
    I would like to ask why response times are so high, even if I only backup the archivelog files? We didn't have this problem before but suddenly since 2 weeks we have this problem and I can't find the problem.
    - We use a 11.2G RAC database on ASM. Redo logs and database files are on the same disks.
    - Autobackup of controlfile is off.
    - Dataguard: LogXptMode = 'arch'
    Greetings,

    Hi,
    Thank you. I am new here and so I was wondering how I can put things into the right category. It is very obvious I am in the wrong one so I thank the people who are still responding.
    -Actually the example that I gave is one of the many hundreds a day. The respone times during the archive backup is most of the time between 2 and 11 seconds. When we backup the controlfile with it, it is for sure that these will be the response times.
    -The autobackup of the controfile is put off since we already have also a backup of the controlfile every hour. As we have a backup of archivefiles every 15 minutes it is not necessary to also backup the controlfile every 15 minutes, specially if that even causes more delay. Controlfile is a lifeline but if you have properly backupped your archivefiles, a full restore with max 15 minutes of data loss is still possible. We put autobackup off since it is severely in the way of performance at the moment.
    As already mentioned for specific applications the DB has to respond in 0,5 seconds. When it doesn’t happen then an entry will be written in a table used by that application. So I can compare the time of failure with the time of something happening. The times from the archivelog backup and the failure match in 95% of the cases. It also show that log file sync at that moment is also part of this performance issue. I actually built a script that I used for myself to determine out of the application what the cause is of the problem;
    select ASH.INST_ID INST,
    ASH.EVENT EVENT,
    ASH.P2TEXT,
    ASH.WAIT_CLASS,
    DE.OWNER OWNER,
    DE.OBJECT_NAME OBJECT_NAME,
    DE.OBJECT_TYPE OBJECT_TYPE,
    ASH.TIJD,
    ASH.TIME_WAITED TIME_WAITED
    from (SELECT INST_ID,
    EVENT,
    CURRENT_OBJ#,
    ROUND(TIME_WAITED / 1000000,3) TIME_WAITED,
    TO_CHAR(SAMPLE_TIME, 'DD-MON-YYYY HH24:MI:SS') TIJD,
    WAIT_CLASS,
    P2TEXT
    FROM gv$active_session_history
    WHERE PROGRAM IN ('yyyyy', 'xxxxx')) ASH,
    (SELECT OWNER, OBJECT_NAME, OBJECT_TYPE, OBJECT_ID FROM DBA_OBJECTS) DE
    WHERE DE.OBJECT_id = ASH.CURRENT_OBJ#
    AND ASH.TIME_WAITED > 2
    ORDER BY 8,6
    - Our logfiles are 250M and we have 8 groups of 2 members.
    - Large pool is not set since we use memory_max_target and memory_target . I know that Oracle maybe doesn’t use memory well with this parameter so it is truly a thing that I should look into.
    - I looked for the size of the logbuffer. Actually our logbuffer is 28M which in my opinion is very large so maybe I should put it even smaller. It is very well possible that the logbuffer is causing this problem. Thank you for the tip.
    - I will also definitely look into the I/O. Eventhough we work with ASM on raid 10 I don’t think it is wise to put redo logs and datafiles on the same disks. Then again, it is not installed by me. So, you are right, I have to investigate.
    Thank you all very much for still responding even if I put this in the totally wrong category.
    Greetings,

  • How to monitor Log Backups for MS SQL Server

    Hello all.
    We are running Solution Manager 7.1 on SP Stack 10 and have downloaded the latest template content.
    When configuring the templates for DB monitoring, we noticed that although there is a metric that monitors the age of the last DB backup, there is no such metric to monitor the age of the last successful Log backup, or even a metric to alert us on a failed backup / log backup.
    Has any of you ever had to create a custom metric to monitor either the age of the latest successful log backup for MS SQL Server, or a custom metric to alert on failed backups / log backups?
    If yes, could you provide some instructions on how to create such a metric?
    Thank you in advance for your answers.
    Phevos

    Divyanshu, thank you for your answer.
    I had a similar idea to check the DB log file for failed log backups. The problem is that when I opened the log file from the dbacockpit, I found no errors/warnings for the days that our log backups did not run or failed. Here is a small part of that log to show you what I mean. In this example, the log backup was not running from 25th of July until the 28th of July when we fixed the log backups again, after receiving a disk space warning (log disk drive was almost full):
    The last successful log backup is mentioned in the log: "20140724091524    Backup    Log was backed up"
    Then as the days go by, there is no backup failure entries whatsoever to look for them in the log:
    20140725000023    spid18s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140725000023    spid18s    AM (UTC). This is an informational message only; no user action is required.
    20140726000020    spid21s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140726000020    spid21s    AM (UTC). This is an informational message only; no user action is required.
    20140727000023    spid22s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140727000023    spid22s    AM (UTC). This is an informational message only; no user action is required.
    20140728000022    spid17s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140728000022    spid17s    AM (UTC). This is an informational message only; no user action is required.
    Until finally on the 28th we restored the log backup functionality:
    20140728042814    Backup    Log was backed up. Database: XXX, creation date(time): 2010/12/22(16:45:29)
    So, I find it difficult to deduce an appropriate string to look for in the log, in order to generate an alert when my log backups are not working.
    Any suggestions? Am I looking at the wrong place perhaps?

  • RMAN backup from another DB server

    Hi all,
    I would like to know Can we take a rman backup from another DB server in oracle 9.2...
    i.e
    suppose that we have two server
    1. main server
    2. dup server
    I want to take a backup of main server throeugh dup server.....
    if it is poosible then what are all the things that i have to configure....
    pls suggest me.....

    getting an error,
    here hotest is the main db
    and testho is dup db
    F:\Documents and Settings\deepali>rman target rman/cat@hotest catalog rman/cat@testho
    Recovery Manager: Release 9.2.0.4.0 - Production
    Copyright (c) 1995, 2002, Oracle Corporation.  All rights reserved.
    connected to target database: HOTEST (DBID=982176707)
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04004: error from recovery catalog database: ORA-01045: user RMAN lacks CRE
    ATE SESSION privilege; logon denied
    F:\Documents and Settings\deepali>sqlplus /nolog
    SQL*Plus: Release 9.2.0.4.0 - Production on Mon Apr 6 12:17:13 2009
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    SQL> conn sys/deepali as sysdba
    Connected.
    SQL>  GRANT RECOVERY_CATALOG_OWNER TO rman;
    Grant succeeded.
    SQL> GRANT CONNECT, RESOURCE TO rman;
    Grant succeeded.
    SQL> exit
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.4.0 - Production
    F:\Documents and Settings\deepali>rman target rman/cat@hotest catalog rman/cat@t
    estho
    Recovery Manager: Release 9.2.0.4.0 - Production
    Copyright (c) 1995, 2002, Oracle Corporation.  All rights reserved.
    connected to target database: HOTEST (DBID=982176707)
    connected to recovery catalog database
    recovery catalog is not installed
    RMAN> register database;
    recovery catalog is not installed
    recovery catalog is not installed
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of register command at 04/06/2009 12:18:09
    RMAN-06429: RCVCAT database is not compatible with this version of RMAN
    RMAN> select * from rc_database;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01005: syntax error: found "identifier": expecting one of: "allocate, alter
    , backup, beginline, blockrecover, catalog, change, connect, copy, create, cross
    check, configure, duplicate, debug, delete, drop, exit, endinline, host, {, libr
    ary, list, mount, open, print, quit, recover, register, release, replace, report
    , renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, s
    pool, startup, shutdown, send, show, test, upgrade, validate"
    RMAN-01008: the bad identifier was: select
    RMAN-01007: at line 1 column 1 file: standard input
    RMAN>pls suggest me whether i am following the right path or not...

  • Backup Failure using OEM (Oracle 9i)

    Backup Failure using OEM
    I have oracle 9i (windows 2000 server)
    I tried to make a fullbackup using OEM, it gives me NO error messages
    I got result file with 890 MB (my Db is not huge),
    but when I go back to the JOBs in OEM I found the status of the job FAILED
    I tried to do the same thing using incremental backup level 0, but I got the same result
    any Idea why the job didn't complete successfully
    thanx in advance

    Here is the deal.
    I need to be able to work in the OEM for my class. (Oracle DBA in Training) It is a significant part of my grade to be able to find the required help through forums like these to help me get the backup/recovery process to work through the OEM. My books deal with the OEM in a Win2000 Pro/Server environment, and don't take into consideration the variances in XP Pro. My install works great, other than I am receiving a "Fail" on my OEM Backups under Jobs. It further explains that I do not have the proper permissions to perform the backup job that was created. My instructor is completely hands off when it comes to help. So if anyone has run into this problem and been successful in fixing the problem without using a different utility. Please let me know.
    Thanks in advance,
    Vic

  • Backup Failure using OEM

    Backup Failure using OEM
    I have oracle 9i (windows 2000 server)
    I tried to make a fullbackup using OEM, it gives me NO error messages
    I got result file with 890 MB (my Db is not huge),
    but when I go back to the JOBs in OEM I found the status of the job FAILED
    I tried to do the same thing using incremental backup level 0, but I got the same result
    any Idea why the job didn't complete successfully
    thanx in advance

    Use command line -> rman .

  • Error... trying to backup files from remote server

    I've tried to backup files from one server (client installed) to tape drive on the administrative server (administrative, media, client) but get an error.
    Backup of administrative server to the same media family was successful. What can be wrong?
    2014/09/29.12:41:47 Transcript for job admin/14.1 running on 1-prim
    2014/09/29.12:41:47
    Backup started on Mon Sep 29 2014 at 12:43:24
    Volume label:
    Volume tag: ABC028
    Volume UUID: da584616-2537-1032-990c-ae2b164578ea
    Volume ID: test_media-000001
    Volume sequence: 1
    Volume set owner: root
    Volume set created: Tue Sep 23 18:10:59 2014
    Volume set expires: Tue Oct 07 18:10:59 2014
    Media family: test_media
    Original UUID: da584616-2537-1032-990c-ae2b164578ea
    Archive label:
    File number: 3
    File section: 1
    Owner: root
    Client host: prgrc01
    Backup level: 0
    S/w compression: no
    Archive created: Mon Sep 29 12:43:24 2014
    Encryption: off
    NDMP_MOVER_LISTEN failed because a listen socket couldn't be created.
    The error reported was "host not found (FSP network database manager)".
    Error: can't tell NDMP mover on 1-prim to listen - I/O error (NDMP client)
    Backup statistics:
    status 23
    devices Drive1
    devices 1
    volumes test_media-000001
    voltags ABC028
    file 3
    host prgrc01
    encryption off
    start_time Mon Sep 29 2014 at 12:43:24 (1411980204)
    end_time Mon Sep 29 2014 at 12:43:32 (1411980212)
    backup_time Mon Sep 29 2014 at 12:43:24 (1411980204)
    entries_scanned 0
    kbytes_scanned 0
    entries_excluded 0
    entries_skipped 0
    mount_points_skipped 0
    files 0
    directories 0
    hardlinks 0
    symlinks 0
    sparse_files 0
    filesys_errors 0
    unknown_type 0
    file_kbytes 0
    dev_kbytes 6
    dev_iosecs 0
    dev_iorate 7.2 KB/S
    wrt_iosecs 8
    wrt_iorate 896.0 B/S
    physical_blks_written 0
    write_errors 0
    physical_blks_read 0
    read_errors 0
    error_rate 0%
    path / incomplete

    I've resolved the problem. There was a mystake in client host name.

  • Backup Failures to URL

    We are getting frequent backup failures, when backing to URL below is the message from event log
    An error occurred during data transfer operations with SqlServer, HRESULT:  0x80770003
    SQLVDI: Loc=CVDS::Close. Desc=Open devices!. ErrorCode=(0). Process=7396. Thread=7764. Client. Instance=MSSQLSERVER. VD=Global\https://storage/dbname.bak_SQLVDIMemoryName_0.
    BACKUP failed to complete the command BACKUP DATABASE dbname. Check the backup application log for detailed messages.
    Also below is the detailed message after turning on Traceflag 3051
    1/27/2015 9:10:28 AM:    ======== BackupToUrl Initiated =========
    1/27/2015 9:10:28 AM:    Inputs: Backup = True, PageBlob= True, URI = https://storage/dbname.bak, Acct= xxxxxx, Key= xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx,
    FORMAT= True, Instance Name = MSSQLSERVER, DBName = dbname LogPath = G:\MSSQL\logs
    1/27/2015 9:10:28 AM:    Process Id: 7396
    1/27/2015 9:10:28 AM:    Time for Initialization = 31.2446 ms
    1/27/2015 9:10:28 AM:    BackupToUrl Client is getting configuration from SqlServr
    1/27/2015 9:10:28 AM:    Time for Handshake and VDI config = 15.6255 ms
    1/27/2015 9:10:28 AM:    Time for Get BlobRef = 32.0122 ms
    1/27/2015 9:10:29 AM:    lease id is 258757f9-8f8b-4110-bf56-7ab1a5caf67f
    1/27/2015 9:10:29 AM:    Time for blob create = 343.0298 ms
    1/27/2015 9:10:49 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:11:09 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:11:29 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:11:49 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:12:09 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:12:29 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:12:49 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:13:09 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:13:29 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:13:29 AM:    Backup communication with SqlServr failed, hr = 0x80770003
    1/27/2015 9:13:29 AM:    A fatal error occurred during Engine Communication, exception information follows
    1/27/2015 9:13:29 AM:     Exception Info: An error occurred during data transfer operations with SqlServer, HRESULT:  0x80770003
    1/27/2015 9:13:29 AM:     Stack:    at Microsoft.SqlServer.VdiInterface.VDI.PerformPageDataTransfer(CloudPageBlob pageBlob, AccessCondition leaseCondition, Boolean forBackup)
       at BackupToUrl.Program.MainInternal(String[] args)

    We are getting frequent backup failures, when backing to URL below is the message from event log
    An error occurred during data transfer operations with SqlServer, HRESULT:  0x80770003
    SQLVDI: Loc=CVDS::Close. Desc=Open devices!. ErrorCode=(0). Process=7396. Thread=7764. Client. Instance=MSSQLSERVER.
    VD=Global\https://storage/dbname.bak_SQLVDIMemoryName_0.
    BACKUP failed to complete the command BACKUP DATABASE dbname. Check the backup application log for detailed
    messages.
    Also below is the detailed message after turning on Traceflag 3051
    1/27/2015 9:10:28 AM:    ======== BackupToUrl Initiated =========
    1/27/2015 9:10:28 AM:    Inputs: Backup = True, PageBlob= True, URI = https://storage/dbname.bak,
    Acct= xxxxxx, Key= xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx,
    FORMAT= True, Instance Name = MSSQLSERVER, DBName = dbname LogPath = G:\MSSQL\logs
    1/27/2015 9:10:28 AM:    Process Id: 7396
    1/27/2015 9:10:28 AM:    Time for Initialization = 31.2446 ms
    1/27/2015 9:10:28 AM:    BackupToUrl Client is getting configuration from SqlServr
    1/27/2015 9:10:28 AM:    Time for Handshake and VDI config = 15.6255 ms
    1/27/2015 9:10:28 AM:    Time for Get BlobRef = 32.0122 ms
    1/27/2015 9:10:29 AM:    lease id is 258757f9-8f8b-4110-bf56-7ab1a5caf67f
    1/27/2015 9:10:29 AM:    Time for blob create = 343.0298 ms
    1/27/2015 9:10:49 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:11:09 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:11:29 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:11:49 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:12:09 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:12:29 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:12:49 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:13:09 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:13:29 AM:    A timeout occurred on GetCommand, timeout length of 20000, will retry
    1/27/2015 9:13:29 AM:    Backup communication with SqlServr failed, hr = 0x80770003
    1/27/2015 9:13:29 AM:    A fatal error occurred during Engine Communication, exception information
    follows
    1/27/2015 9:13:29 AM:     Exception Info: An error occurred during data transfer operations
    with SqlServer, HRESULT:  0x80770003
    1/27/2015 9:13:29 AM:     Stack:    at Microsoft.SqlServer.VdiInterface.VDI.PerformPageDataTransfer(CloudPageBlob
    pageBlob, AccessCondition leaseCondition, Boolean forBackup)
       at BackupToUrl.Program.MainInternal(String[] args)
    The size of the backup file is 115GB and I have verified there is no Proxy settings on the server, also
    its happening on multiple servers whereas the Tlog backup to the same container are successful all the time.

  • Export backup failures:

    We are getting export backup failures here is the export log:
    Connected to: Oracle9i Release 9.2.0.5.0 - Production JServer Release 9.2.0.5.0 - Production Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set server uses WE8MSWIN1252 character set (possible charset conversion)
    About to export the entire database ...
    . exporting tablespace definitions
    . exporting profiles
    . exporting user definitions
    . exporting roles
    . exporting resource costs
    . exporting rollback segment definitions . exporting database links . exporting sequence numbers . exporting directory aliases . exporting context namespaces . exporting foreign function library names . exporting PUBLIC type synonyms
    EXP-00008: ORACLE error 904 encountered
    ORA-00904: "DBMS_JAVA"."LONGNAME": invalid identifier
    EXP-00000: Export terminated unsuccessfully
    PLease help me to get the export done.
    Thanks
    Niket

    done these steps...
    startup mount;
    alter system set "_system_trig_enabled" = false scope=memory;
    alter system enable restricted session;
    alter database open;
    @?/rdbms/admin/catnojav.sql
    @?/xdk/admin/rmxml.sql
    @?/javavm/install/rmjvm.sql
    truncate table java$jvm$status;
    SQL> startup mount
    ORA-01081: cannot start already-running ORACLE - shut it down first
    SQL> /
    SP2-0103: Nothing in SQL buffer to run.
    SQL> alter system set "_system_trig_enabled" = false scope=memory
    2 /
    System altered.
    SQL> alter system enable restricted session
    2 /
    System altered.
    SQL> alter database open
    2 /
    alter database open
    ERROR at line 1:
    ORA-01531: a database already open by the instance
    SQL> start E:\ORA924\rdbms\admin\catnojav.sql
    SQL> Rem
    SQL> Rem $Header: catnojav.sql 15-jul-2002.07:13:41 rburns Exp $
    SQL> Rem
    SQL> Rem catnojav.sql
    SQL> Rem
    SQL> Rem Copyright (c) 2002, Oracle Corporation. All rights reserved.
    SQL> Rem
    SQL> Rem NAME
    SQL> Rem catnojav.sql - CATalog NO JAVa classes for RDBMS
    SQL> Rem
    SQL> Rem DESCRIPTION
    SQL> Rem This script removes the RDBMS Java classes and system
    SQL> Rem triggers created by the CATJAVA.SQL script.
    SQL> Rem
    SQL> Rem NOTES
    SQL> Rem Must be run AS SYSDBA
    SQL> Rem
    SQL> Rem MODIFIED (MM/DD/YY)
    SQL> Rem rburns 07/15/02 - rburns_bug-2415848
    SQL> Rem rburns 06/13/02 - Created
    SQL> Rem
    SQL>
    SQL> Rem =====================================================================
    SQL> Rem Check CATJAVA and JAVAVM status; conditionally abort the script
    SQL> Rem =====================================================================
    SQL>
    SQL> WHENEVER SQLERROR EXIT;
    SQL>
    SQL> BEGIN
    2 IF dbms_registry.status('CATJAVA') IS NULL THEN
    3 RAISE_APPLICATION_ERROR(-20000,
    4 'CATJAVA has not been loaded into the database.');
    5 END IF;
    6 IF dbms_registry.is_loaded('JAVAVM') != 1 THEN
    7 RAISE_APPLICATION_ERROR(-20000,
    8 'JServer is not operational in the database; ' ||
    9 'JServer is required to remove CATJAVA from the database.');
    10 END IF;
    11 END;
    12 /
    BEGIN
    got this error....

  • UCS Backup Failure

    Hi,
    I am experiencing backup failures with Full State or All Configuration. My Backup and Export Policies for Fullstate and All Configuration fail when using FTP, TFTP or SFTP servers.
    I can successfully backup using HTTP to a local file system.
    UCS manager reports a cause "satellite-connection-init"  code "F16683"
    No connections to the FTP,TFTP,SFTP servers are made from UCS.The error seems to indicate an authentication error, however this is not the case.
    Any ideas would be appreciated.
    Ian.

    Hello Ian,
    Are those FTP / TFTP / SFTP servers running on Windows system ?
    Does manual back up completes successfully ?
    If yes, it could be  CSCue69671
    Symptom:
    Scheduled  backup operation fails with following error message
    "End point timed out. Check for IP, password, space or access related issues"
    Conditions:
    If file server ( FTP / SFTP / TFTP / SCP ) is running on Windown operating system.
    Workaround:
    Following work around options are available
    1) Perform manual backup with file name that does not have reserved Windows characters.
    2) Backup files to server running on Linux operating system.
    Additional Information
    USCM creates backup with file name that  has " : " character  in it. The " : " character is one of the reserved characters that is not permitted to be used as file name on Windows operating system.
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247%28v=vs.85%29.aspx#file_and_directory_names
    UCSM software that has fix for this defect will exclude reserved characters for the backup file name.
    Padma

Maybe you are looking for