Taking rman backup from a different server
HI Al,
Is it possible for us run the rman backup from a different server other than the server on which database exist .
For Ex :
Our database is on server X
But , I want to schedulde the archive backup from the server Y .
How can we do this and is it possible ...
Regds
Rahul Gupta
Yes, as long the RMAN executable is compatible to the target database, on metalink:
RMAN Compatibility Matrix
Doc ID: 73431.1
rman sys/<password>@<connect_string>
Werner
Similar Messages
-
RMAN backup from another DB server
Hi all,
I would like to know Can we take a rman backup from another DB server in oracle 9.2...
i.e
suppose that we have two server
1. main server
2. dup server
I want to take a backup of main server throeugh dup server.....
if it is poosible then what are all the things that i have to configure....
pls suggest me.....getting an error,
here hotest is the main db
and testho is dup db
F:\Documents and Settings\deepali>rman target rman/cat@hotest catalog rman/cat@testho
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: HOTEST (DBID=982176707)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04004: error from recovery catalog database: ORA-01045: user RMAN lacks CRE
ATE SESSION privilege; logon denied
F:\Documents and Settings\deepali>sqlplus /nolog
SQL*Plus: Release 9.2.0.4.0 - Production on Mon Apr 6 12:17:13 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn sys/deepali as sysdba
Connected.
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman;
Grant succeeded.
SQL> GRANT CONNECT, RESOURCE TO rman;
Grant succeeded.
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
F:\Documents and Settings\deepali>rman target rman/cat@hotest catalog rman/cat@t
estho
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: HOTEST (DBID=982176707)
connected to recovery catalog database
recovery catalog is not installed
RMAN> register database;
recovery catalog is not installed
recovery catalog is not installed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 04/06/2009 12:18:09
RMAN-06429: RCVCAT database is not compatible with this version of RMAN
RMAN> select * from rc_database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "identifier": expecting one of: "allocate, alter
, backup, beginline, blockrecover, catalog, change, connect, copy, create, cross
check, configure, duplicate, debug, delete, drop, exit, endinline, host, {, libr
ary, list, mount, open, print, quit, recover, register, release, replace, report
, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, s
pool, startup, shutdown, send, show, test, upgrade, validate"
RMAN-01008: the bad identifier was: select
RMAN-01007: at line 1 column 1 file: standard input
RMAN>pls suggest me whether i am following the right path or not... -
Restoring RMAN backup on a different server
Hi oracle gurus
i have following scenario
i have a compressed backup set of a database
i want to restore that rman backup on to a different server.
both the server have same version of oracle.and both the server are of 32 bit.
please reply if any more info is required.RESTORE AND RECOVERY PROCEDURE OF PRODUCTION DATABASE BACKUP ON TEST SERVERS
As part of disaster recovery exercise or to test the validity of a RMAN backup, a full restore and recovery of databases can be performed on scratch or test servers utilising the production RMAN backups which have been restored from the tape backups on these test or scratch servers.
This note will illustrate the above procedure by detailing the steps required to restore the backup of a production database (prod1) on a test server linux01 .
The following assumptions are made in this note:
The RMAN backups have been restored from tape backups to the same backup location on the test server as the production server where the backup was originally taken
The identical directory structure as is present on production has been created on the test server. This will apply to not only the location of the database files (data, control files, redo log files), but also to the bdump,cdump, udump and adump locations.
Controlfile autobackup has been enabled. This is important.
Overview
Restore the spfile from the autobackup
Restore the controlfile from the autobackup
Restore the data files
Recover by applying archived redo log files
Open the database with resetlogs
Restore the SPFILE
[oracle@linux01 prod1]$ rman target /
connected to target database (not started)
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> startup force nomount;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/10.2.0/dbs/initprod1.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 2039056 bytes
Variable Size 67109616 bytes
Database Buffers 83886080 bytes
Redo Buffers 6348800 bytes
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore spfile from autobackup;
4> }
RMAN> shutdown immediate;
Restore the Control File
In this case, the instance is now being started with the restored spfile. We can create a pfile as well from this spfile is so required.
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore controlfile from autobackup;
4> }
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
Restore the database
RMAN> restore database;
Recover the database
The recovery will fail at a point where it cannot restore any more archived redo log files.
In this case the last archived log file which has been backed up is sequence 613.
This information can be obtained by issuing a LIST BACKUP OF ARCHIVELOG ALL command.
So RMAN will fail when it tries to apply sequence 614 ….
RMAN> recover database
[oracle@linux01 PROD1]$ rman target /
connected to target database: PROD1 (DBID=4266928631, not open)
RMAN> sql 'alter database open resetlogs';
RMAN>
reference: http://gavinsoorma.com/recovery-scenarios/ -
I am getting below error while taking RMAN backup.
Friends,
I am getting below error while taking RMAN backup.
The issue is related with a lock while trying to backup the controlfile.
The lock is more likely caused by the autobackup controlfile process started just before RMAN process was also trying the backup controlfile as shown in the following alert.log excerpt.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Is there anyway to solve this issue?Thanks in advance.Hi,
SQL> SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
FROM v$session s, v$enqueue_lock l
WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2; 2 3
no rows selected
Oracle version : 10.2.0.3
I am getting this error once in a month not everyday.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Please suggest me based on this..Thanks in advance.. -
Trying to use FTP to get data from a different server
Hi Friends,
I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = V_PASSWORD
SOURCELEN = V_PWD_LEN
KEY = CS_KEY_500098
IMPORTING
DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'test'
PASSWORD = V_PASSWORD
HOST = '176.0.1.6'
RFC_DESTINATION = 'SAPFTPA'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = CMD
TABLES
DATA = MTAB_DATA1
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA1.
WRITE: / MTAB_DATA1.
ENDLOOP.
ELSE.
CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
WRITE: / ERROR.
ENDIF.Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ). -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = S_PWD
SOURCELEN = DSTLEN
KEY = KEY
IMPORTING
DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = P_USER -
> Username
PASSWORD = S_PWD -
> password
HOST = P_HOST -
> Host
RFC_DESTINATION = P_DEST -
> Destination
IMPORTING
HANDLE = HDL
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = HDL
COMMAND = 'set passive on'
TABLES
DATA = RESULT
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = G_FCNAME
CHARACTER_MODE = 'X'
TABLES
TEXT = T_FILE1
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = G_FCNAME1
CHARACTER_MODE = 'X'
TABLES
TEXT = T_FILE2
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
DESTINATION = P_DEST
EXCEPTIONS
DESTINATION_NOT_OPEN = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FTPCON
Hope it helps..... -
Steps to restore RMAN backups from tape to disk
Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks, -
Accessing an object from a different server
Hi,
I am making a program that will access an object from a different server.
I have a program that when I run calls a jsp page running on Server A which in turn should request an object A from Server B.
I am relatively new to Java and jsp. What would my best course of action be.
Thanks in advance,
BrianOr RMI?OK, sounds good, I will look up some RMi on the site.
Thanks, will prob have more questions for you later. -
Taking data from two different server in a single table
Hi All,
can u plz tell me i want take a data from a two different server in a single table
Thanks,
Bell.Again, you have written the same sentence. I have 2 servers Server1 and Server2 and one table called my_table (You or God knows where this table is).
Now tell us what you want to do ?
Sidhu
http://amardeepsidhu.blogspot.com -
RMAN backup restoring to new server help!
I'm using Oracle 8.1.7. The production database was copied (datafiles, controlfile etc) to a NEW server that I'm trying to set up as a development DB. I take full database backups using RMAN from the production server, and I want to restore them on the development server. I think I somehow have to specify the filename/location of the backup file but I can't seem to figure out how to do it.
I am not using a recovery catalog.
Any help is appreciated.If you restore the controlfile backup to the development server RMAN
will "read" the expected location of the backupsets from there.
In 8i you cannot use the CATALOG command so you have to copy all
the backupsets to the same path on the development server as on the
production server.
Once you have your init.ora and controlfiles in place (and created the
expected target directory structure for the database and redolog files),
you can use STARTUP MOUNT and thene RESTORE from RMAN.
I believe that you should be able to rename files in 8i RMAN as well.
If not, you'll have to stick to restoring to the same location.
The key thing is that the controlfile records the "location" of the RMAN backupsets
and the "location" where datafiles are to be restored to. -
RMAN Backup from windows to Linux
Hi,
I am having Windows 2003 server Oracle 10.2
and I have RHEL5 and Oracle 10.2
I have taken a RMAN Oracle Database Backup from windows..
I have installed oracle software on RHEL5 and now i need to restore this backup to the Linux
it is possible to restore it? if possible can any one let me know the process?
Regards,
Vijayaraghavan KI have another doubt
I took RMAN full DB Backup - it comes around 2.5 G (performed on time 9.00 A.M morning)
When i perform differential incremental backup it comes around 2.6 G (performed on time 9.45 A.M )
Why it is coming like this.. The backup should happen only for the changed blocks alone?? i.e it should come around 10 Mb or 20 Mb?? Why is like this? or my understanding of differential backup is wrong?
I issued the below commands for Full DB Backup and Incremental Backup...
FULL DB backup at 9.00 A.M
RMAN> BACKUP INCREMENTAL LEVEL 0 DATABASE;
Differentail Backup a 9.45 A.M
RMAN> BACKUP INCREMENTAL LEVEL 1 DATABASE;
Regards,
Vijayaraghavan K -
RMAN backup restore on new server with CATALOG START WITH
Hello Experts,
CATALOG START WITH
is this required RMAN in catalog mode ?
reference of post
Disastor Recovery with RMAN : Restore backup on new separate Server
Edited by: 873142 on Jul 18, 2011 9:27 PMIf you use a recovery catalog and want to duplicate database in a fresh server.
1. connect with the target database.
2. connect with the recovery catalog.
3. connect with the auxiliary database.
4. Run the duplicate command.
Before running the duplicate command copy the backup piece to your fresh server from the target server. Both mount point should be same.
Regards
Asif Kabir
-- mark your helpful post as correct/helpful. -
RMAN backup from remote pc !
Dear Friends ,
In my database Linux server I have no enough space to take RMAN backup since my database size around 90 GB .
So in this moment I want to take the rman backup form remote machine(From windows or Linux), where all the datafile backup of my Linux database server also goes to the remote machine . is it possible to do ?
Or is there any way to take RMAN backup(datafile,controlfile,spfile backup from server to client) from remote machine without increasing the HDD space of the Local server ?
Waiting for your kind reply ... ...In my database Linux server I have no enough space to take RMAN backup since my database size around 90 GB .
So in this moment I want to take the rman backup form remote machine(From windows or Linux), where all the datafile backup of my Linux database server also goes to the remote machine . is it possible to do ?
Or is there any way to take RMAN backup(datafile,controlfile,spfile backup from server to client) from remote machine without increasing the HDD space of the Local server ?You can't make RMAN backup remotely.
Use third party tools like data-protector or use Oracle secure backup to make backups other than local server. -
Time machine backup from 10.6 server to Lion
Hi
I am running a Mac mini Server with SL Server, but I do not use the server features, it's pretty much a regular workstation. Now I want to upgrade to Lion (workstation) by formatting the hard drive and do a clean install. My question is if it is possible to restore my user data from the Time Machine backup done in SL Server during the setup of Lion? Are those os'es backups compatible or do I have to manually backup my home directory and user data and add everything after finishing the Lion install?
Thanks in advance
/NiclasThanks for your reply.
I guess that on 10.6 as far as TM is concerned the server version is exactly the same as the client version, except that we don't have the benefit of Migration Assistant to do the inherit for us.
I am using a USB disc for TM.
I can see that under Backup.backupdb I have a folder named after the old server, which contains the backups.
I did try simply renaming that to the new server name, just in case the solution might be that simple. But I get "operation not permitted". It's not a permissions problem, and doing chflags nouchg doesn't help. I guess it could be the schg flag, but I'm reluctant to try too hard in case I lose the old backups.
Soooooo I think I am out of options and the only thing I can do is as you say and start again. -
I have to restore the RMAN full backup from tape to new host to a previous date say March 1st. My target database RMAN retention period is 28 days, today is 11th May.
Is it possible to restore the obsolete database from tape backup to new host as of May 1st. If not possible, I would like to restore the available backup say as 15th April from tape to new host.
Can you please provide me the steps to restore the tape old backup to new host.
Thanks,
MahiCan't read documentation? You also seem to be unable to mark questions as answered
Mahi
Newbie
Handle: Mahi
Status Level: Newbie
Registered: Nov 24, 2010
Total Posts: 24
Total Questions: 15 (13 unresolved)
Sybrand Bakker
Senior Oracle DBA -
Restoring RMAN backup from tape beyond retention policy ??
Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.dba.arnab wrote:
Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.
Assuming the actual backup files still exist (the only thing actually deleted is the record of them in the catalog), you can make those files available and use the rman 'catalog' command to re-catalog them.
Maybe you are looking for
-
How to find the outbound idoc function module?(Urgent)
Dear All, How to identify the outbound function module if there is process code assigned to message type. For partner profile the mesasge type is assigned and idoc type .This is the only information maintained . Now my question is how to identify the
-
How to pull e-mail, password recovery phrase and password recovery answer f
Hi all, I am very new to HR ABAP and have some basic doubts in ABAP HR. I need to pull login which is like an e-mail id, password recovery phrase and Password Recovery Answer. Can some one guide me from where or from which table or which info type sh
-
Fixed ip address NAS not being found
I have a mysterious network problem. I have a buffalo linkstation as NAS which is connected on to a switch (US robotics) which is connected to the network via an airport extreme which is set up as a remote base station on a WDS link from an airport e
-
Hi, Based on the selection how to hide blocks in the report level.. Regards, G
-
IMac beachballs on startup for upwards of an hour
My iMac takes ages to become operational, and for sometimes over an hour, it beachballs or simply freezes. However, if I leave it on, the problem seems to go away. it's been doing it for for a while on and off. I thought it might be an OSX issue, so