Archivelog became full too quickly.

Hi experts
Please, yesterday early morning 3:00 AM my filesystem /archivelog got full in 20 minutes (200 archive files), the size of the filesystem is 20G and it's use to become full after a week, I don't know what could happened. What I can see that there's four archivelog each 100MB at the same hour and minute.
Have you ever happen this to you?, what do you recommend to do?.
Thank you very much.

Hi,
There might be any activity in the database at around 3:00 AM, there might be huge loading or DML into the database.
It happened to us many times to us, we compress the archivelogs to keep some space in archivelog destn so to avoid database hung.
I would recommend you to create archive zip script which will run whenever space in the archivelog goes beyond some threshold.
Regards
Jafar

Similar Messages

IPhone 5 : Batteries run out too quickly

I use iphone4 and 5.All settings and use the same network but batteries run out too quickly iphone5 why happened

What are you doing with the phones?
What apps do you use on a daily basis?
The iPhone was designed to work for a whole workday...
Are you streaming video/music over 3G?
Using maps?
Full screen brightness/working outside?
Once we know what you do, then we can advise on battery tips

Batteries run out too quickly!

Hello!
I have a macbook Pro (13 inches) since march 2011, and since I bought it, the batteries run out too quickly, only in 90 minutes, and if I try to watch a film or to use facetime is less time. I went to apple store 5 times: 1st they changed the batteries twice, 2nd they changed the hardware, 3d they formatted my computer, 4th the changed the network? (I,m not quite sure about what they did the last time) and now it is worse, the batteries run out in 60-70 minutes. I don't know what to do, I am really disappointed with apple care service.
Thank you very much for your help in advanced.

What are you doing with the phones?
What apps do you use on a daily basis?
The iPhone was designed to work for a whole workday...
Are you streaming video/music over 3G?
Using maps?
Full screen brightness/working outside?
Once we know what you do, then we can advise on battery tips

My Iphone 5's battery is dying too quickly.

I have an iphone 5 and for the past 3 days the battery has been draining way too quickly even on standby. I did system restore and the problem cured for a few hours. Also the phone has been heating up a lot too lately. First I thought its because its in my case than I left it out in room temperature and the phone heated the same way. It heats most when its connected to its charger which isn't charging the phone to 100%, only 99%. I have sprint and I have not ever been able to send picture messages with the iphone 5. Sprint says everything is fine on their end and Apple says the same. I had an iphone 4s before and that was perfect compared to this and I paid full price for this iphone 5 64GB. I feel like I got a bad phone. Any one else having this problem too?

After waiting a month for my iphone it finally came in last wednesday and same thing with mine. I don't even go on it that much to save it and the battery percent goes down by the minute.. Is it just my phone or is it a software problem? I have had my iphone 3g for 3 years and my battery lasted throughout the day even on it's last leg. I never had the 4 so i can't compare that to the 5.

How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012, How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012

How do I stop my screen saver from coming on too quickly on my MacBook Pro 2012

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Wher

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Where are all the options I had in PS10? Also...Can I burn this to a DVD?

The changes have brought improvements but also drawbacks compared with the old slideshow editor.
The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

Zen Xtra 60 GB: battery goes down too quickly, even when inact

Hello, folks, this is my problem with Zen Xtra 60 GB, which I own for more than a year. A week ago I suddenly noticed that the battery is completely down the other morning, after I played music last night for a few hours on AC. So I plugged it to AC again and - differently from the other people's experiences - it started operating and charging. And I could play the music while charging, and manage the tracks with Nomad Explorer as well. After it charged completely, I unplugged it from AC, played a few more tracks and then shut it down. Next morning battery was down again. So I kept experimenting a few days in a row: charged it completely, played a few tracks, shut it down... and next morning all from the beginning again. I also tried continuous playing on battery, after it was fully charged - the playing time is also decreased.
I guess, my battery is damaged (or some settings on my player are wrong? - which seems unlikely to me). So how can I get the battery replacement? Or can I use some other type of battery? If so, what should I know when choosing the other battery?
Many thanks,
jetlag

SSR, your advice was helpful - I was able to access rescue mode. Before that, I thought of this operation as of "press C while holding Ctrl..." - I always released play/stop button after sticking the reset button, but still too quickly, and then player started in normal mode. It appears, that one should not release play/stop still for a few seconds - until the rescue menu appears. Maybe it would be good to emphasize this moment (not releasing too quickly play/stop after sticking reset) in Catherina's instructions about accessing rescue mode?
But this did not solve my problem!
I charged the battery fully, upgraded the firmware to the latest, and did cleanup. The player rebuilt my library. I played two tracks and turned the player off. After 2 hours, turned it on - battery was drained off again.
Then I charged the battery again, removed the battery and put aside. After 24 hours reseated battery, turned the player on - the battery proudly showed all three bars! Then played one track and turned the player off, and after 3 hours turned on. The battery remained with one bar only. And after 8 hours, it was, of course, empty...
So oh, what can I do? My player is more than one year, so out of warranty. And have no idea, who could repair it here in Lithuania, anyway.
Should I buy Xtra with 30 Gb (cheapest option), and then do harddisc transplantation, to save my 35 Gb of music? (Don't tell me about backups - almost all my music is also on CDs, or on my PC - it just was too long and tedious process, to upload all that to the player, and then rename and organize tracks there...)

Elements of the menu in " DHTML Menu with Sublist 2 " too quickly disappear

Elements of the menu in " DHTML Menu with Sublist 2 " too quickly disappear at navigation.
Where is better to insert a delay? Give an example a code.

Hello,
Can you put an example up on apex.oracle.com. The should act like a normal desktop application menu they are visible till you click somewhere else in the page.
If you are seeing something else then there is an issue. The built in menu's do not have a delay option in them , where you click and it disappear 2 seconds later, though I'm not sure why someone would want that.
Carl

Cannot re-add Printer after Hard Drive became full

Hi, I hope someone can help us, we have a PowerBook G4 running 10.2.8 which we have been happily printing on our new Epson Stylus Photo R1800 for the past 3 months. A few days ago however, it looks like the Hard Disk became full during a particularly long printing run. The printer became 'stopped' and despite numerous restarts of the service and machine, would not start up again. There was an exclamation mark by the printer name.
In desperation we removed the printer from the Print Center, but upon trying to add it again (USB or Epson USB) we now get the message:
'An error occurred while trying to add the selected printers, Error -1'
Now I have been all over the place looking for an explanation of this error and the only reference to it out there was in the patch notes for 10.2.2. Here are some more facts:
- The printer is working fine in OS 9 emulation mode on the same Mac.
- The printer appears as a device when you plug the USB cable in.
Here is what we have tried so far:
- Immediately freed up 3 gb of space on the drive
- Rebooting
- Uninstalling the Driver and reinstalling it
- Downloading the latest driver from Epson (it downloads an aspx file that we can't do anything with)
- Running the Disk Utility and repairing permissions
- Verifying the CUPS service is running
- Downloading the 3rd party Print Center Repair tool and running through all its tests (spool files, cups, permissions) apart from the full Print center reset option.
This has left me defeated and with two options left:
- Go ahead and do the full reset of the Print Center, deleting our older Epson printer
- Purchase and upgrade to Tiger 10.4 in the hope of blasting over the problem
I really hope someone can help us as my girlfriend is a graphic designer and has to get printing again as soon as possible!
Thanks
PowerBook G4 Mac OS X (10.2.x)

If your getting almst any error when actually adding, the print center is not working correctly.
1)You will need to reset your print center
2) Remove the com.apple.print files off your system and restart hoping it clears up the error. Even though apple does not list that fix for this printer specifically, it works sometimes.
3) Re install the OS-- dont copy over, just do a full re install.

Clicking on Firefox causes my computer to flash a blue screen with some info on it (too quickly to read!) then shuts down the computer and reboots. What causes this?

blue screen flashes too quickly to read

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Confused - Do I use Full or Quick Editor PE7

I have been trying for a week now but am still confused whether to choose the Full or Quick Editor. Or even a combination of the two.
How can I get myself less confused :-)

There really isn't an answer to this.
The quick editor has limited capabilities and a very simple interface.
The full editor has huge capabilities, and a more complex interface.
You get to choose. You see what works for you best. It doesn't really matter what other people would choose.

MSN Messenger starting too quickly!!!

As my previous post states, I have just got my new Macpro, and its nice and quick. Infact, the boot up seems to start too quickly. The login, and 'open at login' apps seem to load so soon that the network connection hasn't started yet. I get a 'network diagnosis' messsage that i cancel, and as i try to sign in to MSN again, it works. The internet connection is ADSL via a router wired to left rc45 port when looking from back, and I use static ip internally.
Any ideas? Could it be related to grey screen with horizontal lines that I get on startup? Cheers.

Just reinstalled osx (hang up from pc days where I always resinstalled os) hoping that would cure the problem, but it doesn't. I think the problem is that the WindowServer starts before network startup has complete.
For example:
Jul 19 20:17:20 paul-williams-computer lookupd[110]: lookupd (version 369.6) starting - Thu Jul 19 20:17:20 2007
is after
Jul 19 20:17:07 [53] Server is starting up
Therefore, all apps starting on login (now skype, msn and ichat) all fail to start up. The router is an Orange router connected via cat5, and was available at all times. I have never seen this on the imac G5 + mac mini g4, so could the network card be slightly slower to be 'recognized' by osx?

Exported fireworks loops too quickly

I've used Fireworks to create several frames holding images
and set the timings to be observed during the frames. Have tried
exporting this to animated gif, swf and png and then inserted these
resutling files into my dreamweaver page. The animation works
correctly when viewing on my C drive, but once ftp'd to my site and
viewing with a browser, the looping is too fast. No settings i've
made seems to slow down the animation. Anyone know what I might be
doing wrong?
thanks......becky

Hi Becky:
They are photographic images - and relatively large
dimensions - so GIF
may not be the best option to begin with, as GIF's reduce the
color
palette and are affected by image dimensions (bigger files).
I'm not a Flash person, but inserting jpegs into a flash
movie would
give you better quality and I would think, more control.
Both pages transistioned for me - although yes - incredibly
fast. But I
think this ahs got to do with the timeline in flash, as both
sample
pages are flash movies. I do not know if any frame delay
settigns you
use in an animated GIF file will be directly read or
understood by Flash.
If you want to stick with GIFS, also check to make sure that
ALL the
frames are selected before you input the timing. It's
possible that you
only applied the frame delay to one frame, rather than all of
them.
If a slide show is what you're looking for, have you tried
out Alan
Musselman's Fireworks Album Creator extension?
http://weblogs.macromedia.com/amusselman/archives/custom_commandsmxps/index.cfm
Hope this helps!
Jim Babbage
rebasue wrote:
> Thanks Alex....but I don't think I'm guilty of any of
the 3 you mentioned.
>
> Here is the page which is flipping too quickly in
Firefox and Internet
> Explorer:
http://www.acrossmyheart.com/joe.html
>
> I think I have the frame speed set to 300/100 sec
because the help files said
> that would display each frame for about a second?
> and this page doesn't loop at all in Firefox or Internet
Explorer:
>
http://www.acrossmyheart.com/zip.html
>
> I have tried pasting in the HTML code from inside
Dreamweaver using the
> Insert....Fireworks HTML route.
>
> I have tried inserting an image object and grabbing the
swf file
>
> AND I've tried inserting.....image and grabbing the
animated gif.
>
> Clearly I am missing something along the way. Which of
the above 3 insertions
> is correct? HTML, SWF or animated gif?
>
> becky
>
>

Restarting too quickly, changing state to maintenance

I'm trying to add a new resource to stop/start at reboot time. It's a single process that needs to be started, but everytime I enable the resource it keeps stopping and starting it until eventually it goes into maintenance saying "Restarting too quickly, changing state to maintenance".
I have the following in the /lib/svc/method (start) file :
#!/sbin/sh -xv
# Start method script for the xcom service
. /lib/svc/share/smf_include.sh
case "$1" in
'start')
if [ `pgrep xcomd` ]
then
echo "$0: XCOM is already running..."
exit $SMF_EXIT_ERR_NOSMF
fi
if [ -x /etc/xcomd ]
then
echo "Starting XCOM..."
/etc/xcomd
else
echo "XCOM is not installed or not executable..."
exit $SMF_EXIT_ERR_NOSMF
fi
'stop')
if [ `pgrep xcomd` ]
then
echo "Stopping XCOM..."
/etc/xcomd -s
else
echo "XCOM is not running..."
fi
esac
exit $SMF_EXIT_OK
And the following in /var/svc/manifest/application/xcom.xml :
<?xml version='1.0'?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>
<service_bundle type='manifest' name='export'>
<service name='application/xcomd' type='service' version='0'>
<create_default_instance enabled='true'/>
<single_instance/>
<dependency name='usr' grouping='require_all' restart_on='none' type='service'>
<service_fmri value='/system/filesystem/minimal'/>
</dependency>
<exec_method name='start' type='method' exec='/lib/svc/method/xcomd %m' timeout_seconds='60'>
<method_context/>
</exec_method>
<exec_method name='stop' type='method' exec='/lib/svc/method/xcomd %m' timeout_seconds='60'>
<method_context/>
</exec_method>
<stability value='Unstable'/>
<template>
<common_name>
<loctext xml:lang='C'>XCOM file transfer program</loctext>
</common_name>
<documentation>
<manpage title='xcomd' section='8'/>
<manpage title='xcomcfg' section='8'/>
</documentation>
</template>
</service>
</service_bundle>
Any ideas where this is going wrong??? I've pulled the manifest file togeher looking at other things so I'm not surprised if there's errors in there. Any help greatly appreciated.

Change the name of the script to be anything other
than 'xcomd' or 'svc-xcomd' and it would work. That's
what I've done now. The start/exec and stop/exec now
call a different script. One problem I had with this
was even though when doing a 'listprop' it showed it
had taken the change, and I'd exported it out to the
manifest file, when trying to enable the resource it
would complain that it couldn't find the old script
[ Feb 15 18:12:53 Executing start method ("/lib/svc/method/svc-xcomd") ]
/sbin/sh: /lib/svc/method/svc-xcomd: not found
[ Feb 15 18:12:53 Method "start" exited with status 1]
Is there a way of refreshing things one you make a
change??? When I'm exiting out I'm either using 'end'
or 'exit'.Yes, you have to run "svcadm refresh xcomd". This is
because svc.startd uses the property values from the
"running" snapshot of the service. svcprop does that by
default as well. A plain listprop in svccfg, though, will only
show you the current values of the properties. (You can use
selectsnap to select the running snapshot and examine its
property values with listprop.) svcadm refresh updates the
running snapshot with the current property values, so that must
be done after changing properties.

The bookmarks list disappear too quickly to choose one

the bookmarks list disappears too quickly. i do not have the time to select one. this is a new problement i didnot have before.

Hello Bergeret.
I'm guessing any menu will disappear too quickly too, and that this isn't just about the bookmarks menu.
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

Archivelog became full too quickly.

Similar Messages

Maybe you are looking for