ARE 1 AND ARE3

I WANT 2 PRINT (OUT PUT )ARE1 AND ARE3
WHAT IS THE T CODE
ADI

Dear Adi,
Please try this tcode. J1IA102
Regards,
S. Raju

Similar Messages

  • Data nt capturing in are1 and are3 document

    dear sir,
    in are1 and are3 documents base exicise value is nt being captured and higher edusess 1% too but BED and educess is captured ?can anybody help me ?is ita notes problem?

    hi,
    first echek if the duties are there in your comm invoice. if yes and they are still not appearing in your excise invoices check if the following tables are suitably updated- J_1IEXCHDR and J_1IEXCDTL
    saurabh

  • What is difference between bus.Area and plant

    dear experts, 
                what is difference between bus.Area and plant?
    thanks
    Rajakarthik.

    Hi
    Plant and Business Area are not the same.
    Business Areas are configured in FI module as per the Product lines or geographical operations basis.
    Where as The plants created in the logistics (General) module are assigned to the company code. That means all transactions taking place in the plants are posted to the attached company code in SAP FI.
    You can post a business area to several company codes and use it for cross-company-code reporting.
    The R/3 System uses a combination of plant and division to assign the relevant business area. When you use the R/3 System to automatically draw up accounts for business areas, you can assign only one business area to a combination of plant and division. Plants and divisions can be assigned and combined in several different ways.
    http://help.sap.com/saphelp_46c/helpdata/en/5d/a77d80ec1111d2bc1000105a5e5b3c/content.htm
    Re: Business Area and Plant
    Regards

  • Vendor Ageing Report Business Area and Profit Center wise

    Dear Experts,
    I have a requirement where user wants a Report for Vendor Ageing Business Area and Profit Center wise.I checked Standard T Codes but the same were Business Area wise but i could'nt find Profit Center wise Report.If their is any standard functionality then please advice.
    We are using SAP ECC 6.0 Classic GL with Spl Purpose Ledger active.Can someone please advice can i derive such a report through Report Painter.If possible please advice in details.
    Your Valuable inputs shall be appreciated....
    Regards
    Rahul

    Hi Durga,
    Can you please elaborate further on the same how you are determining the Report in FBL1N.What are the prerequisited to be taken care of and some further details on the same.
    My Bus Area is not as same as Profit Center eg
    BA          PC
    FXRT     RT0001 / 2 / 3
    TMMG   TM0001/ 2 / 3
    LTOB     LO0001/ 2 / 3
    I checked in my system but we do not have the Program for the following T Codes
    S_PCO_36000218 - Segment Receivables
    S_PCO_36000219 - Segment Payables
    S_AC0_52000887 - Profit Center Receivables
    S_AC0_52000888 - Profit Center Payables
    Regards
    Rahul

  • WBS, Business Area and Profit Center not flowing in GR/IR Account

    Hello Experts,
    I have come across a very strange situation. I have two MIGO documents which are showing different posting characteristics:
    1) FI Document 5000000553
    In this document, the Business area and profit center is flowing in GR/IR Clearing Account (15660000) but WBS element is not flowing to this line item.
    Screen shot is as follows:-
    As you can see from the above screen shot  that, for GR/IR Account 15660000. Only Business Area and Profit Center are flowing and WBS Element is not coming.
    2. FI Document 5000015602
    In this document, the WBS element is going in GR/IR Clearing Account (15660000) but Business area and profit center is not flowing to this line item
    Screen Shot is as follows:-
    From the above screen shot, Business Area and Profit Center are not flowing but WBS Element is coming.
    Could you please let me know what could be the possible reason for this behavior of both the documents.?
    Regards,
    Amit

    Hi Saurabh,
    Its great to see your reply. Yes, I know that currencies and posting dates are different. But that's the way it is. One document is for fiscal year 2014 and other is for 2013. There is nothing related to currency and posting date which was causing the strange behavior of the system.
    However, our team analyzed the issue and found that only for service material having a special valuation type related to services is causing the problem and still we are diagnosing the other possible root cause as well.
    Thanks for your co-operation and suggestion.
    Regards,
    Amit

  • Def of dunning area and valuation area

    hi,
    pls tell me the exact defintions of dunning area and valuation area,

    Dunning areas are used if several organizational units are responsible for carrying out dunning within one company code. These organizational units are referred to as dunning areas. The dunning area can correspond, for example, to a profit center, a distribution channel, a sales organization or a business area.
    This is a combination betwwen SD and FI
    Organizational level at which the material is valuated. A valuation area can be one of the following:
    Plant
    All plants belonging to a company code, in which case the valuation area is the company code
    This is used in MM and can be used to assign in MM G/L accounts to a valuation area.
    It possible that valuation area is used on other places to with a compleet differenrt functionality
    Paul

  • Difference between dunning area and dunning procedure

    Hi,
    can anybody explain the exact differnce between dunning area and dunning procedure
    why we define both n how we use them
    what is the differnce between dunning by dunning area and dunning by dunning procedure
    i would be very much thankful if  can get the exact differnetation

    Dunning Areas are organizational units that you use to process the dunning program for example, by division, or sales organization.
    You use dunning areas if several organizational units are responsible for carrying out dunning within a company code. These organizational units are represented by dunning areas in the SAP System.
    You can have either One dunning procedure for One dunning area or several Dunning procedures per dunning area.
    Dunning procedure actually defines how business partners are dunned.
    The dunning program duns open items in customer and vendor accounts if the overdue items result in a debit balance. When you configure the dunning program, you can specify additional criteria for determining whether accounts or their open items are to be dunned.
    Hope it helps.
    Thanks,
    Nandita

  • MRP Area and SA Schedule Lines

    Hello All,
        We are looking at using MRP Areas and noticed it can not be turned off once on (ECC 5.0).  Given that, is the following true with reference to schedule agreements:
    - Will seperate schedule lines be created for each MRP Area (same material)?
    - Does the receiving storage location come from the material master or the MRP Area (Does it matter if it is a type 01 or type 02 MRP Area)?
    - Is it possible to define differen't receiving slocs in a schedule line for a Plant MRP Area?
    Thank you,
    Jerry

    Thank you Charlie,
        The link is helpful however it doesn't come straight out and answer the questions - meaning there is a bit of ambiguity there.
    It would be appreciated if you or anybody that is using MRP areas with schedule agreements is doing the above.
    Regards,
    Jerry

  • My safari sometimes keeps asking me to log into the "Newcastle area" and doesn't let me browse any pages ? Why and how do I fix it ?

    My safari sometimes asking me to log into the "Newcastle area" and doesn't let me browse any pages ? Why and how do I fix it ?

    Try this:
    With Safari open type command + option + E - all three keys together.
    Next go to Safari in the menu bar, and select Reset Safari,

  • How can I change a PDF document to have an enlarged text area and smaller margins?

    I've just been reading a long discussion initiated by a guy who wanted to recompose a PDF file to print in fewer pages. I'm not asking about that. I'm aware that Acrobat Pro 9 will not recompose the pages of a pdf for you; as someone said, it's not a word processing program. I want to copy a PDF to a new file with an enlarged text area and smaller margins, so I can read it more easily. My eyesight isn't so great.
    I'm trying to print a decision of the US Supreme Court, for my study. The problem is that these PDF files of such decisions are composed in 10-point type with generous margins, in folio-size pages smaller than 8 1/2 x 11". When you open PDF files of these decisions, you get extremely wide margins and relatively small type. Essentially, I'd like to re-rasterize the document so it prints on my 8 1/2 x 11" paper in a larger apparent type size, but in the same high resolution as the original. By the way, the decision I'm working on is almost 200 pages long, so I don't want to do this, obviously, in a page by page manner.  
    I guess I could do this in Photoshop, by blowing pages up and cropping them. Photoshop does a good job of eliminating the jaggies when you do this. But it would seem better to re-rasterize the pages from the PDF source file. So would any reader be kind enough to explain this process to me? (I'm fairly savvy in Photoshop, Illustrator, and computer printer concepts, but a complete newb in Acrobat.)

    If you just want this for printing, one thing you can easily do is crop all of the pages to remove the margins. For example, you can rop 2" off the left and right sides, and 1.5" off the top and bottom. Then print using a Page Scaling of "Fit to Printable Area".
    To crop in Acrobat 9, select: Document > Crop Pages
    be sure to select All for the Page Range.

  • HT1495 My Wife and I have separate accounts on the same Macbook Pro.  I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to d

    My Wife and I have separate accounts on the same Macbook Pro.  I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?

    You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.

  • Verizon wirelss seems to have more drop areas and less coverage in the Spokane area.  Why is that?

    I have been a Verizon wireless customer for many years.  This last year or so I have found more and more light coverage areas and have had more dropped calls than in the previous five.  I have had to consider moving to another carrier.  Does anyone know of why Verizon coverage has become worse and are others experiencing the same thing?

        Thanks for filling us in on a few more details! There are definitely many factors that can contribute to changes in service. Builging materials, terrain, number of customers trying to use the phone nearby, even signal boosters can all have a different effect on your coverage in an area. The Network Extender http://vz.to/IHRT6h is intended to help with both voice and 3G data inside of a home and there is not a 4G LTE version (calls are not placed over LTE services in most cases). 
    If the purchase of a Network Extender hasn't helped inside your home, we do need to take a few troubleshooting steps to see why. When you place a call, do you hear the short tones before the call connects indicating you're connected to the Network Extender? What type of home internet connection do you have? What model router is the extender connected through?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Using Win 10 there is a need for an app to determine the full device display area and aspect ratio programitically; the dimensions are needed to create full-screen bitmap.

    While Windows.Current.Bounds returns the application windows size, in order to create a full-screen bitmap my app would need to retrieve the full display area  of the device. I cannot even get the aspect ratio.
    Pre-Win10, using Windows.Current.Bounds I can create a bitmap of whatever size application window the user is seeing. When the user is showing my app at full screen, I can therefore get the full display area and aspect ratio of the device and create a full-screen
    bitmap.
    With Win10, the user would need to know to hide the taskbar and also display at full-screen before an app can retrieve the display area and aspect ratio using Windows.Current.Bounds.
    Before Win10 it's obvious to the user that full-screen is or is not being used. When I create the bitmap, I create it to fit the application window. When the app is displayed full screen, the bitmap will be full screen. Also, the app starts full-screen so
    I can detect the display area at startup if I need to.
    With Win10, to the user the app "looks like" it is full screen with the taskbar displayed even though it's not really full screen.
    I believe that in Win10 determining the full display area will be useful and not just retrieving the application window size.
    musical9

    Rob, Is this forum best way to get my suggestion to the development team?
    Before Win10 it's obvious to the user that full-screen is or is not being used. When I create the bitmap, I create it to fit the application window. When the app is displayed full screen, the bitmap will be full screen. Also, the app starts full-screen
    so I can detect the display area at startup if I need to.
    With Win10, to the user the app "looks like" it is full screen with the taskbar displayed even though it's not really full screen.
    Yes, Windows.Current.Bounds does work the same, but I believe that in Win10 determining the full display area will be useful and not just the application window.
    musical9

  • How difficult to create a user login area, and where to start?

    I have a website which I created in Microsoft Expression Web 4. I would like to add a user login area and tie it to an existing SQL database which is updated frequently. I am not sure where to start or how likely I am to succeed. It is for a client's
    website, so I am willing (and hopefully able) to learn, but do not want it to turn into a long drawn out project.
    I can code in html and css and use java scripts. I don't know visual basic or how to work within the database (it will be provided by the client). I'm open to any advice on how easy or difficult this will be without other forms of coding knowledge, and would
    love any advice on the best place to start.  I have found some tutorials and downloaded MS Visual Studio Express 2013, since it was coming up as the best program for this. 
    Thank you for any advice!

    You want to create a login in SQL? any way you need one to access the database. You may need to contact your DBA to do it as you maynot be authorized to do it. Use below link to know creating SQL logins/Users.
    http://www.blackthornesw.com/robo/projects/blackthornepro/HOWTO_-_Creating_a_SQL_Server_Database_Login_Account.htm
    Thanks
    Swapna

  • I have no clue as to what my security question answers are and since this is my first purchase from my mac book it is asking for these. What do i do?

    I have no clue as to what my security question answers are and since this is my first purchase from my mac book it is asking for these. What do i do?

    You won't be able to change your rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

Maybe you are looking for