Are the outputs (vallues) of the following queries equal?

Are the outputs (values) of the following queries equal expained by Oracle?
SQL> select to_char(sysdate+1/24,'yymmddhh24') from dual;
TO_CHAR(
09081513
SQL> select to_char(sysdate, 'yymmddhh24miss') from dual;
TO_CHAR(SYSD
090815130000

Than you for reply.
I use it for partitioning the table automatically and automatically get the partition names and ranges (get from the SYSDATE).
For example create a partition per hour:
sqlCreate='ALTER TABLE message ADD PARTITION '||'p_message'||
TO_CHAR(SYSDATE+1/24,'YYMMDDHH24')||' values less than (TO_DATE('
''||TO_CHAR(SYSDATE+2/24,'YY/MM/DD HH24')||''
',''YY/MM/DD HH24''))';Is the previous code correct?
Please modify it.
Thank you

Similar Messages

  • What are the following Fields meant to contain...?

    What info are the following Fields in iTunes meant to contain?
    'Comments', 'Description', 'Category', 'Grouping'?
    Thanks.

    They're not meant to contain anything, so they may be blank. However, those fields are there for various purposes. For example, pick any song or Podcast in your Library:
    Comments: this field can have a note about the song, Podcast etc. etc. Amazon use the Comments field to make a note of the Amazon ID they assign a song when they sell it to you. You can edit the Comments field if you wish, adding any note that you want, for your own purposes.
    Description: is used by Podcasters. They enter a description of their Podcast, typically a little information about that particular show. This field for a song etc, can be found (and edited) on the Videos tab of the song, (even if it's not a video!). Not all Podcasters make use of this field and not usually used in songs.
    Category: Used by iTunes Radio services, to identify the type of programming they offer. Also used by Podcasters. Not always used by either service and not usually used in songs.
    Grouping: Ah! Now, this is a good and useful field. Suppose you want a song to be in two different genres. Well, that cannot be done. However, if you want one song with genre "Rock" to also be included with all your "70's Pop" genre, simply type Rock into the grouping field and then create a Smart Playlist which has the rules: Genre is 70's Pop and Grouping is Rock. This Smart Playlist will have all the "70's Pop" genre in it and any song that you have typed "Rock" into the Grouping field. It will not have any of the other Rock genre in the list.
    Actually, a Smart Playlist can make use of any of the fields you have mentioned. So it's possible to create a Smart Playlist that picks out any song or Podcast etc. containing a particular word in the Description field and a different word in the Comments field.

  • What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

    What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
    These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

    DHCP Option 60:  Go HERE.

  • What are the following entries doing in the following configuration file?

    What are the following entries doing in the following configuration file?
    Thank you
    <include>coherence-pof-config.xml</include>
    <allow-interfaces>true</allow-interfaces>
    <allow-subclasses>true</allow-subclasses>
    <?xml version="1.0"?>
    <!DOCTYPE pof-config SYSTEM "pof-config.dtd">
    <pof-config>
    <user-type-list>
    <!-- coherence POF user types -->
    <include>coherence-pof-config.xml</include>
    <!-- com.tangosol.examples package -->
    <allow-interfaces>true</allow-interfaces>
    <allow-subclasses>true</allow-subclasses>
    </pof-config>

    <allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
    <allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
    <user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
    <include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
    http://wiki.tangosol.com/display/COH35UG/user-type-list
    http://wiki.tangosol.com/display/COH35UG/pof-config
    Thanks,
    Everett Williams
    Coherence Team

  • What are the following script doing?

    What are the following script doing? What does symbol *<* stand for?
    protected Map<Member, List<String>> divideWork(Set members, List<String>
    fileNames)
    Thank you

    su_penguin wrote:
    Side note: http://en.wikipedia.org/wiki/Operator_overloading
    Extra credit: What trick does Java's syntax use to allow Generics to compile with or without whitespace between the angle brackets? Ex: Map< Member, List< String > >
    Why doesn't it work in C++?Does this have something to do with the comment "Note that it is not an LL(1) grammar"? [http://java.sun.com/docs/books/jls/third_edition/html/syntax.html]

  • Can you please advise on the following queries?

    Hi Friends,
    Can you please advise on the following queries?
    FV60  is there anyway we can stop an FV60 transaction being input for a specified vendor or number of vendors?
    Your response is highly appreciated.
    Regards,
    Baltha

    Hello,
    You can write an User-exit for validation in GGB0.
    Assign the same in OB28.
    Please check up with the ABAPer for the technical feasibility.
    Regards,
    Ravi

  • Are the following features licensed or part of Enterprised Edition?

    Are the following features licensed or part of Enterprised Edition?
    1) Standby Archival - ARCH
    2) Standby Archival - LGWR
    3) Standby Transmission
    4) Data Guard (Not active Data Guard)
    Thank you

    With the Enterprise Edition, yes they are all part of DataGuard which is licenced. However, the Standby Instance, itself, needs to be licenced.
    Hemant K Chitale

  • Are the following type equivalent?

    Hey guys, i want to know if a type of object is equivalent to a type of record. So ignore scoping issues, are the following types equivalent?
    create or replace type xml_row as object (xmlfragment varchar2(2000));
    create or replace type xml_tab is table of xml_row;
    /What i want to accomplish is the following equivalent
    create or replace package pac_a as
      type xml_row is record(xmlfragment varchar2(2000));
      type xml_tab is table of xml_row;
    end pac_a;
    /

    From a "data" point of view the types are equivalent.
    An object type has a set of functionalities that a classical record type doesn't have, first of all the possibility of creating a column of a table using this type...
    Max

  • In Logic Pro, trying to import a drum track from the bin to arrange area, the 'follow loop' box does not appear in the inspector

    imported a drum track from bin to arrange area.  It will not follow tempo of the project even though it was recorded in this project.  The 'follow tempo' box in the inspector does not appear even though it is present on other tracks in the file.
    how do I set up the track so the 'follow tempo' box appears in the inspector?

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Why are the following not being backup?

    EtreCheck reports that the following are not backed up, what up with that?
    jmf
    Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!

    That is a bug.. see
    See D10 here.
    I recommend you switch over to CCC.. it is much more reliable.

  • Why are the following processes always using lots of memory?

    Can someone tell me why the following processes are always using lots of memory and are always running?
    kernel_task 280MB
    java 300MB
    clamd 120MB
    mds 100MB
    WindowServer 100MB
    coreservicesd 60MB

    Because they require that much memory and because the processes are always in use.
    This is one reason why the minimum system memory requirement is 1 GB.
    Now, you have one third-party process listed, clamd, which is used by ClamXAV anti-virus software. If you can uninstall it you will recover the memory needed by clamd.

  • Are the following basic reading functions *really* still unavailable in ADE for VO Users?

    Adobe,
    It seems the latest build(ADE 1.8 preview 4)  *still* lacks the following basic reading functions when used on a Mac running OS X Lion 10.7.4.
    1. Inability to navigate and read by paragraph.
    2. Inability to navigate and read by line.
    3. Inability to navigate and read by word.
    4. Inability to navigate and read by character.
    5. Inability to annotate.
    6. Inability to interact with the text of a document (attempting to interact causes a restart of VO.)
    If I am mistaken, would you be so kind as to provide instructions for performing these important basic reading functions? If I am not mistaken, can you please explain why these functions are not available and can you also provide an ETA for when you will make them available?
    Also, can you please provide an explanation of the following unlabeled elements that are located on the toolbar at the top of the screen when reading an epub document?
    1. Element located to the right of the "Back to Library" button. This element is read by VO as simply "Button."
    2. Element located to the right of the "Text Size Menu Button." This element is reported simply as "Blank, Edit Text."
    3. The element to the right of the item in number 3 is also simply labeled "Button."
    4. The last element encountered on the toolbar is simply labeled "unchecked."
    Regards,
    Bryan J

    Adobe,
    It seems the latest build(ADE 1.8 preview 4)  *still* lacks the following basic reading functions when used on a Mac running OS X Lion 10.7.4.
    1. Inability to navigate and read by paragraph.
    2. Inability to navigate and read by line.
    3. Inability to navigate and read by word.
    4. Inability to navigate and read by character.
    5. Inability to annotate.
    6. Inability to interact with the text of a document (attempting to interact causes a restart of VO.)
    If I am mistaken, would you be so kind as to provide instructions for performing these important basic reading functions? If I am not mistaken, can you please explain why these functions are not available and can you also provide an ETA for when you will make them available?
    Also, can you please provide an explanation of the following unlabeled elements that are located on the toolbar at the top of the screen when reading an epub document?
    1. Element located to the right of the "Back to Library" button. This element is read by VO as simply "Button."
    2. Element located to the right of the "Text Size Menu Button." This element is reported simply as "Blank, Edit Text."
    3. The element to the right of the item in number 3 is also simply labeled "Button."
    4. The last element encountered on the toolbar is simply labeled "unchecked."
    Regards,
    Bryan J

  • Are The Following Oracle DBA Contents Practical? - Contents Listed Inside

    I'm looking forward to give the following course a try:
    LINK DELETED BY AUTHOR
    Are the contents well put so that it can help me to be
    an assistant of a Professional DBA? Do you think it would
    prepare me for Oracle DBA I and II exam?
    Edited by: user11164565 on Jan 5, 2010 11:59 AM
    Edited by: user11164565 on Jan 5, 2010 12:01 PM

    Doesn't look like a good class to me.
    I don't know what the format is but anyone calculating time to the second isn't allowing discovery or questions.
    Anyone offering to teach you Oracle on VM has totally ignored Oracle's support matrix.
    16 minutes on Oracle processes? Is this the speed reader's version?
    Time wasted on the deprecated product iSQL*Plus.
    It looks like a total waste of both time and money.
    A decent class just on RMAN is a minimum of two days.

  • What are the following tablespaces / datafiles?

    I have the following tablespaces and corresponding datafiles ... hoping someone can help me identify the application for it. Or what was the previous DBA doing?
    tablespace / datafile
    CONSTANT_GROW_INDEXES / SCM_CGIND.DBF
    etc ..
    DEPENDENCY_INDEXES / SCM_DEPIND.DBF
    etc...
    RAPID_GROW_INDEXES / SCM_RAPID_GROW_IND.DBF
    etc ...
    SYSTEM_META_INDEXES / SCM_SYS_META_IND.DBF
    etc ...

    apex_disco wrote:
    I have the following tablespaces and corresponding datafiles ... hoping someone can help me identify the application for it. Or what was the previous DBA doing?
    tablespace / datafile
    CONSTANT_GROW_INDEXES / SCM_CGIND.DBF
    etc ..
    DEPENDENCY_INDEXES / SCM_DEPIND.DBF
    etc...
    RAPID_GROW_INDEXES / SCM_RAPID_GROW_IND.DBF
    etc ...
    SYSTEM_META_INDEXES / SCM_SYS_META_IND.DBF
    etc ...On the face of it, there is no way for anyone outside your organization to be able to answer a question like that. However, I thought the name of the TS looked familiar, and so it was.
    http://lmgtfy.com/?q=CONSTANT_GROW_INDEXES

  • What spec PC's are the intel imacs equal to?

    Ive looked all over online for some sort of comparison table but cant find anything...
    Just wondering what sort of PC spec the intel imacs are equivelent to?

    There is no chart to look at anymore as they use the same CPUs now. A Core Duo T2300 is a Core Duo T2300 processor, no matter what OS it is running.
    Match the CPU in the two systems you are comparing and you will have a basic idea of, well nothing since they would be essentially the same computer.
    Tiger is the difference now, and it is a huge difference.

Maybe you are looking for