Are the read and write operations atomic for an array in a local variable.

Hi,
I would like to know when you access an array in a local variable, is it an atomic operation?
Thanks,
Mat

Thanks for the comments. I agree with you. However, I my case, race conditions and synchronization are not issues. Therefore, the only thing that matters to me is that the write and read operation of the array must be atomic. I know that I can implement that with a LV2 style global but I want to avoid it if possible.
If writing and reading to an array are atomic operations then I can simply use local or global variables.
All I need to know is: Is reading or writing an array in a local variable an atomic operation?
Thanks,
Mat

Similar Messages

  • Slow read and write operations on DAQmx

    I am trying to build up a feedback control system using PCI-6052E and PCI-6722 cards, so that the computation of the control algorithm is performed on computer's CPU. I am trying to reach sampling period of 1kHz. It turns out that the bottleneck of my system are the read and write operations from and to cards that consume lot of processor time.
    An example code (C#) that shows how the reads and writes are implemented is as attachment. On my tests the example code produces a read-time of 1000 samples on 6 channels 7.58s and a write-time of 4.69s. Is there any way to improve the performance?
    The program is running on Windows XP on 1000Mhz processor.
    Attachments:
    DAQmxPerformanceTest.cs ‏3 KB

    Petteri,
    I don't have the hardware to reproduce this, but I have a few ideas. For analog output, are you creating a task, starting it, and calling write repeatedly, or are you simply calling write? While an AO Task will auto start on write, it will also go through the process of stopping when the write is complete. Which means next time you call write, the task will need to start again. It will be much more effecient if you explicitly call start on the task once, perform as many writes as required, and stop/clear the task when you are done. This same principle applies to you analog input reads as well.
    I hope this helps,
    Dan

  • Hyper-V Virtual Storage Device - Read and Write Operations/Sec

    Hi,
    Everything is Windows 2012 R2.
    SCOM does not gather any data for the following performance counters:
    Hyper-V Virtual Storage Device - Write Operations/Sec
    Hyper-V Virtual Storage Device - Read Operations/Sec
    Hyper-V Management Pack Extensions 2012 / 2012 R2 are imported.
    If I add the counters in PerfMon, it works.
    Any idea why? I've tried in several environments, DEV, QA and PROD, but it does not work anywhere.
    Thanks!

    To monitor Hyper-V Virtual Storage Device - Read and Write Operations/Sec, you can refer below link
    http://www.aidanfinn.com/?p=15386
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • File read and write operations

    how do use file read and write operations?
    can anyone give simple program?

    http://www.tutorialspoint.com/cplusplus/cpp_files_streams.htm
    http://www.cplusplus.com/doc/tutorial/files/
    check this
    and with mfc
    http://www.functionx.com/visualc/fileprocessing/serialization.htm
    https://msdn.microsoft.com/en-us/library/6337eske.aspx
    http://www.informit.com/library/content.aspx?b=Visual_C_PlusPlus&seqNum=90

  • How do I repair permissions when I removed the read and write priveleges to everyone?

    I won't beat around the bush.
    I accidentally disabled read and write priveleges to everyone onto the entire startup drive. It didn't occur to me that would also include admin. I saw a red no-sign on the folder, and now starting up leaves me with the white screen and the gray apple indefinately.
    I'm not sure how to use terminal, but I have been using the time machine - it won't help me any if I can't start up my computer, though.
    Thanks for helping.

    You are very welcome, and if you have not done a Mountain Lion install before, read/print for reference: http://support.apple.com/kb/PH10763  It is easy and straight forward but having the steps in front of you always helps.

  • What are the adm_modresname and adm_moduseruid parameters used for?

    The following parameters are in the server configuration file (unison.ini).
    What are these parameters used for?<BR>
    <P>
    [UTL]<BR>
    adm_modresname = FALSE<BR>
    adm_moduseruid = FALSE<BR>
    <P>
    These parameters accept only the default values shown above and are not
    configurable. They were not meant to appear in the documentation or in the
    default unison.ini file.
    <P>
    Please do not attempt to change these parameters.

    Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
    If yes, what are the correct steps of installation ?
    I am getting the errors while configuring the Java SSM.
    Is Admin in the same BEA-HOME as SSM: [default: Yes]:
    Give the location of the Admin: c:\bea\ales32-admin
    Enter the identity directory name which will be used: [default: CoESSM_dir]:
    Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
    Checking if default ARME port is free: 8000
    Generating policy files based on templates ...
    Checking if SSM instance already present
    Checking to see if SSM ARME port is free.
    Checking JDBC parameters...
    Checking to see if asipassword was run...
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
    I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

  • What are the /rpc/ and /ews/ folders used for in Microsoft Exchange Server?

    I come across these two folders constantly when seeing the Microsoft Exchange server externally (other folders are usually /owa/, /powershell/ and /ecp/.
    I've looked everywhere online I can think of but cannot find an easy-to-understand description that clearly understands it.
    I notice that both folders are blocked by login boxes which are usually either Basic or NTLM authentication, why is this? Should they be hidden completely from external access?
    Any help will be much appreciated, this is also my first post so apologies for any conventions I've missed. 

    More information here
    http://blogs.msdn.com/b/mvpawardprogram/archive/2013/03/18/virtual-directories-exchange-2013.aspx
    http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
    DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

  • Observing ORA-00028 during read and write operations

    In toplink connection pool, if a connection becomes stale, does Toplink try to re-connect or throw an exception? Under what circumstances we could see this error?
    Thanks,
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: ORA-00028: your session has been killed
    Error Code: 28
    Call: UPDATE IdcUser SET lastLogout = ?, version = ?, modifiedDate = ? WHERE ((id = ?) AND (version = ?))
    bind => [2011-01-27 02:52:17.0, 91, 2011-01-27 02:52:17.447, 1024077, 90]
    Query: UpdateObjectQuery(User Kislay)
    at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:305)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.processExceptionForCommError(DatabaseAccessor.java:1328)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:722)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:790)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:524)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:467)
    at oracle.toplink.internal.sessions.AbstractSession.executeCall(AbstractSession.java:800)
    at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
    at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:179)
    at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:670)
    at oracle.toplink.internal.queryframework.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:421)
    at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1131)
    at oracle.toplink.queryframework.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:69)
    at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:279)
    at oracle.toplink.queryframework.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:47)
    at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:674)
    at oracle.toplink.queryframework.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:597)
    at oracle.toplink.queryframework.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:103)
    at oracle.toplink.queryframework.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:75)
    at oracle.toplink.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2753)
    at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1079)
    at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1063)
    at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1022)
    at oracle.toplink.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:288)
    at oracle.toplink.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:167)
    at oracle.toplink.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3459)
    at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1327)
    at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1423)
    at oracle.toplink.internal.sessions.UnitOfWorkImpl.commitRootUnitOfWork(UnitOfWorkImpl.java:1169)
    at oracle.toplink.internal.sessions.UnitOfWorkImpl.commit(UnitOfWorkImpl.java:941)
    at com.integral.session.ejb.UserServiceManager.setUserLogoutTime(UserServiceManager.java:1199)
    at com.integral.session.ejb.UserServiceManager$WebUser.invalidateAndRemoveSession(UserServiceManager.java:812)
    at com.integral.session.ejb.UserServiceManager$WebUser.invalidateAndRemoveSession(UserServiceManager.java:745)
    at com.integral.session.ejb.UserServiceManager.removeUserSession(UserServiceManager.java:257)
    at com.integral.apps.session.IdcHttpSessionListener.sessionDestroyed(IdcHttpSessionListener.java:83)
    at org.apache.catalina.session.StandardSession.expire(StandardSession.java:687)
    at org.apache.catalina.session.StandardSession.isValid(StandardSession.java:579)
    at org.apache.catalina.session.ManagerBase.processExpires(ManagerBase.java:678)
    at org.apache.catalina.session.ManagerBase.backgroundProcess(ManagerBase.java:663)
    at org.apache.catalina.core.ContainerBase.backgroundProcess(ContainerBase.java:1284)
    at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1569)
    at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1578)
    at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1578)
    at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.run(ContainerBase.java:1558)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: java.sql.SQLException: ORA-00028: your session has been killed
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
    at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:715)

    The error seems to indicate that the connection has been killed by the server, perhaps due to a timeout.
    In the latest EclipseLink version shipped with TopLink, dead connections in the EclipseLink connection pool should be automatically reconnected.
    Your error indicates you are not using the latest EclipseLink version, but the obsolete toplink.jar shipped with 11g.
    To get dead connection handling you may need to upgrade to using the eclipselink.jar.
    James : http://www.eclipselink.org

  • Firefox version 21 What is the WEB DEVELOPER TOOL ? What are the fuctions and what is it for?

    I just want to know what all the tools do in the tools bar/ web developer
    What does each of them control?

    Current Firefox versions have a lot of built-in web developer tools including an Inspector and Style editor.
    *https://developer.mozilla.org/en/Tools
    The Web Developer toolbar has a help menu (F1) to facilitate entering commands.<br />
    You can also use this toolbar to make a full page screenshot.
    *https://developer.mozilla.org/en/Tools/GCLI
    *https://developer.mozilla.org/en/Tools/Debugger
    *https://developer.mozilla.org/en/Tools/Scratchpad
    *https://developer.mozilla.org/en/Tools/Page_Inspector
    *https://developer.mozilla.org/en/Tools/Page_Inspector/HTML_panel
    *https://developer.mozilla.org/en/Tools/Page_Inspector/Style_panel
    *https://developer.mozilla.org/en/Tools/Page_Inspector/3D_view
    *https://developer.mozilla.org/en/Tools/Style_Editor

  • Multithreaded problem in read and write thread

    This is a producer consumer problem in a multi-threaded environment.
    Assume that i have multiple consumer (Multiple read threads) and a
    single producer(write thread).
    I have a common data structure (say an int variable), being read and written into.
    The write to the data sturcture happens occasionally (say at every 2 secs) but read happens contineously.
    Since the read operation is contineous and done by multiple threads, making the read method synchronized will add
    overhead(i.e read operation by one thread should not block the other read threads). But when ever write happens by
    the write thread, that time the read operations should not be allowed.
    Any ideas how to achive this ??

    If all you're doing is reading an int, then just use regular Java synchronization. You'll actually get a performance hit if you're doing simple read operations, as stated in the ReadWriteLock documentation:
    Whether or not a read-write lock will improve performance over the use of a mutual exclusion lock depends on the frequency that the data is read compared to being modified, the duration of the read and write operations, and the contention for the data - that is, the number of threads that will try to read or write the data at the same time. For example, a collection that is initially populated with data and thereafter infrequently modified, while being frequently searched (such as a directory of some kind) is an ideal candidate for the use of a read-write lock. However, if updates become frequent then the data spends most of its time being exclusively locked and there is little, if any increase in concurrency. Further, if the read operations are too short the overhead of the read-write lock implementation (which is inherently more complex than a mutual exclusion lock) can dominate the execution cost, particularly as many read-write lock implementations still serialize all threads through a small section of code. Ultimately, only profiling and measurement will establish whether the use of a read-write lock is suitable for your application.

  • Read and write speeds of PCI-E SSD 256GB

    What are the read and write speeds exceeded with a 2014 Mac Mini with the 256GB PCI-E SSD from Apple? Thanks.
    PS: I was thinking about getting the 2014 Mac Mini with these specs at $899.99:
    2.6GHz Dual-Core Intel Core i5 (Turbo Boost up to 3.1GHz)
    8GB 1600MHz LPDDR3 SDRAM
    256GB PCIe-based Flash Storage
    Intel Iris Graphics
    User's Guide (English)
    Accessory Kit

    8 to 9 hundre MB/s for the PCIe SSDs vs 500 MB/s for a starndard SSD

  • How to burn read and write files on DVD

    I would like to know how to burn DVDs (image files) with the Read and Write setting. I have changed the settings in Get Info for the image files to Read and Write for Owner, Group and Others and yet when I burn the DVD and try and copy the files back onto the hard drive (to test if it works or not) it won't allow me. When I check the Get Info it says Read and Write for owner (greyed out) and Read Only for Group and Others (greyed out too).
    I have also tried to change the status of the blank DVD before adding files and after adding the files (but b4 the burn) to Read and Write, this works but then during the burn process the DVD or burner changes my settings to Read Only.
    I am burning with Finder and have tried with Toast 10 Titanium. What am I doing wrong, or not doing at all?! I'm going loopy with frustration!

    Kiraly, I agree that the actual problem here might be something else, but as a side issue there seems to be a difference in the way permissions are handled when a file copy is made using Finder compared to when the copy is made using the cp copy in Terminal. At least in my Tiger system, Finder preserved the permission structure, though not the ownership, when it copied a file, whereas cp used the OS defaults.
    I tried the following experiment:
    From my test user account "t", I created a textfile named ReadWrite.txt, and gave it Read+Write permissions for Owner, Group, and Others. I then burned it using Finder to a DVD which I named PermissionTest, and then unchecked the "Ignore Ownership" box on PermissionTest.
    The original ownership and permissions were preserved on the DVD, though of course you couldn't actually write to anything there:
    xxG5-Computer:~ t$ ls -l /Volumes/PermissionTest/ReadWrite.txt
    -rw-rw-rw- 1 t t 15 Sep 13 18:25 /Volumes/PermissionTest/ReadWrite.txt
    I then copied the file from the DVD to the Desktop using Finder, and the permissions were preserved!
    Finder copy:
    xxG5-Computer:~ t$ ls -l /Users/t/Desktop/ReadWrite.txt
    -rw-rw-rw- 1 t t 15 Sep 13 18:25 /Users/t/Desktop/ReadWrite.txt
    I then trashed the Finder copy of ReadWrite,txt on the desktop, and made a second copy from the DVD, but this time I used the cp command from Terminal instead of using Finder. This time the permissions were not preserved, but reverted to the OS default:
    cp copy:
    xxG5-Computer:~ t$ cp /Volumes/PermissionTest/ReadWrite.txt Desktop
    xxG5-Computer:~ t$ ls -l /Users/t/Desktop/ReadWrite.txt
    -rw-r--r-- 1 t t 15 Sep 13 19:43 /Users/t/Desktop/ReadWrite.txt
    I then switched to a different user account "t1", and repeated the above with the same DVD, first copying the ReadWrite.txt file to the desktop using Finder, and then using cp. The ownership of the copied file changed from t to t1 in both cases, but the permission structure again was preserved in the Finder copy but not in the cp copy:
    DVD file:
    xxG5-Computer:~ t1$ ls -l /Volumes/PermissionTest/ReadWrite.txt
    -rw-rw-rw- 1 t t 15 Sep 13 18:25 /Volumes/PermissionTest/ReadWrite.txt
    Finder copy:
    xxG5-Computer:~ t1$ ls -l /Users/t1/Desktop/ReadWrite.txt
    -rw-rw-rw- 1 t1 t1 15 Sep 13 18:25 /Users/t1/Desktop/ReadWrite.txt
    cp copy:
    xxG5-Computer:~ t1$ cp /Volumes/PermissionTest/ReadWrite.txt Desktop
    xxG5-Computer:~ t1$ ls -l /Users/t1/Desktop/ReadWrite.txt
    -rw-r--r-- 1 t1 t1 15 Sep 13 19:51 /Users/t1/Desktop/ReadWrite.txt
    I got similar results when I tried copying a file with Read+Write permissions for all from a USB flash drive to the Desktop, again with the "Ignore Ownership" box unchecked.

  • Problem with air read and write smb shared directory of file

    hi, everyone.
    I'm want to access smb directory of file,And to read and
    write operation, I would like to ask how I should do?
    Thanks!

    You can't access any OS facility nor execute arbitrary command.
    So the best solution is to mount samba directory BEFORE run your AIR application; you eventually can create a script that mount samba (and asks password) and then run you AIR application.
    see
    http://www.mikechambers.com/blog/2008/01/17/commandproxy-net-air-integration-proof-of-conc ept/
    for a more complex solution.

  • PCIe-6536 Simultaneous Read and Write

    I have an application where I need to simultaneously read 24 bits (Ports 0-2) and write 8 bits (Port 3), using an external clock.  The way it is done now is I create a read task and I create a write task.  I send my external clock to PFI4 and PFI5, because two clock inputs are required (one for read, one for write).  And I send a trigger signal to PFI3 to start and synchronize the tasks.
    However it is not working correctly.  My clock is ~15MHz and the reads and writes are off by a random number of a few clock cycles.  For example when I start writing out Port 3, the reading into Ports 0-2 will start 2 or 3 or 4 clock cycles later.  
    Is there a way that I can read and write simultaneously that will work correctly??

    I am still trying to figure out this problem.  I want to simultaneously write bytes out of Port_3  and acquire 24 bit words into Ports 0-2.  The only way I know to synchronize the tasks is to have them both start on a rising edge trigger signal on PFI3.
    If my clock is a few hundred kilohertz, the tasks are synchonized.  When the clock is over 1 MHz then I start seeing the read of 24-bit words lagging the output write by 1 clock cycle sometimes.  The higher the clock rate, the more delay I see.  With a 20MHz clock I see a lag of 8 or 9 or 10 clock cycles.  I spent a lot of money on this card but it apparently doesn't work as advertised.  It is supposed to work up to 25MHz but I have problems at 1MHz.
    The way I am testing it is to loop Port_3 directly into Port_2 with a short ribbon cable (using the CB-2162 test board made for the I/O card).  I can send a pattern out and read it in and see how many of the first bytes were not read in.  For some reason the Acquire task is lagging the Generate task...

  • Need help to read and write using UTF-16LE

    Hello,
    I am in need of yr help.
    In my application i am using UTF-16LE to export and import the data when i am doing immediate.
    And sometimes i need to do the import in an scheduled formate..i.e the export and imort will happend in the specified time.
    But in my application when i am doing scheduled import, they used the URL class to build the URL for that file and copy the data to one temp file to do the event later.
    The importing file is in UTF-16LE formate and i need to write the code for that encoding formate.
    The problem is when i am doing scheduled import i need to copy the data of the file into one temp place and they doing the import.
    When copying the data from one file to the temp i cant use the UTF-16LE encoding into the URL .And if i get the path from the URl and creating the reader and writer its giving the FileNotFound exception.
    Here is the excisting code,
    protected void copyFile(String rootURL, String fileName) {
    URL url = null;
    try {
    url = new URL(rootURL);
    } catch(java.net.MalformedURLException ex) {
    if(url != null) {
    BufferedWriter out = null;
    BufferedReader in = null;
    try {
    out = new BufferedWriter(new FileWriter(fileName));
    in = new BufferedReader(new InputStreamReader(url.openStream()));
    String line;
    do {
    line = in.readLine();
    if(line != null) {
    out.write(line, 0, line.length());
    out.newLine();
    } while(line != null);
    in.close();
    out.close();
    } catch(Exception ex) {
    Here String rootURL is the real file name from where i have to get the data and its UTF-16LE formate.And String fileName is the tem filename and it logical one.
    I think i tried to describe the problem.
    Plz anyone help me.
    Thanks in advance.

    Hello,
    thanks for yr reply...
    I did the as per yr words using StreamWriter but the problem is i need a temp file name to create writer to write into that.
    but its an logical one and its not in real so if i create Streamwriten in that its through FileNotFound exception.
    The only problem is the existing code build using URL and i can change all the lines and its very difficult because its vast amount of data.
    Is anyother way to solve this issue?
    Once again thanks..

Maybe you are looking for