ARE1 creation error - "excise Invoice is not meant for Exports"

Hello Experts
We are working on ECC 6.0.
We were so far dealing with domestic sales and now have to start with exports (ARE1)
I've gone through many threads and all major configuration has been done according to J91 Block Builder. But I still have doubts.
1. While doing billing for export sales, when should excise invoice be generated. When generated then should it posted with accounting entry?
2. We've created a Running Bond & on test basis we have done billing and excise invoice (DLFC) has been generated along with billing.
But when we try to create ARE1 (J1IA101) with reference to above Official excise invoice, we get the message 4F242 ( 00090006 / 2008 excise invoice is not meant for exports). We've noticed in table J_1IEXCHDR for the above excise 90006 that the field Export Type is blank which should otherwise be B (Export under Bond). We have updated manually in the table as B to test and we are able to move ahead.
3. If we dont generate the excise with billing and try to do it in J1IIN, under utilisation even after changing the type from Local to Export only DEEMED Exports is highlighted in blue and could not be turned to BOND type.
Please suggest.
Kapil

Dear Kapil
when should excise invoice be generated
Once you generate delivery related (document type F8) proforma or commercial invoice, you should generate excise invoice
When generated then should it posted with accounting entry?
No excise entries should not be posted to accounting for export sales
excise invoice is not meant for exports
First ensure that you have a separate series group for exports.
Next in case of your Excise Invoice Type dont have any of the following, then system will throw that error
- Deemed export
- Export under bond
- Export without bond
- Export under Letter of Undertaking
Check whether the excise invoice type is generated with any of the above
thanks
G. Lakshmipathi

Similar Messages

ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"

I am working on ECC6 version of sap i am trying to create the ARE1 but it give the error as '0000500001/2007 excise
invoice is not meant for export'.I am trying to debug the program i thing the sy-msg type it catch that is e thats y it
goes to other loop pls help me out .

Dear Sarthak,
I have already maintained the number range object earlier, Still i verified it and number range object is present.
The error is not due to this Number range object.
The error is still there, Pls help.
Regads,
Arunava Sahana

"Excise Invoice is not meant for Exports".

Dear All,
I am facing a problem while creating ARE1 for Export Sales.
At the time of creation (Tcode - J1IA101), when i am giving the outgoing excise invoice number, in the given field, system is saying that "Excise Invoice is not meant for Exports".
Whereas I have maintained seperate Series Group for Domestic as well as Exports.I have checked No.ranges as well, where I have found that, the Outgoing Excise invoice number is also maintained in the Number range Objects for Exports.
Can anybody suggest how to resolve the issue.
Rgds,
Indrajit

1.Check the Series Group is Maintained for Domestic and Exports
2. Maintain the number range in T.Code SNUM - Object "J_1IEXCEXP"
3.Ensure that the excise invoice number you referred is created for an export billing document.
4.Then go to J1IIN, check on the utilisation screen whether invoice type has been changed from Local to the respective export excise invoice.
5. Maintain the Bond with T.code J1IBN01 respective Plant and the Value with from to date
6. Cretae the ARE 1 through T.code J11A101 check the Excise Invoice No and the Amount
7. Check the Excise duty(BED) , E cess and Hr Edu Cess value is apperaing if not you have apply the Snote .
thanks
MJP Michael Joseph

Excise invoice is not meant for exports. Message no. 4F242

Hi All
As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
while Creating ARE - 1 document through T.Code J1IA101 it thronging ERROR
0020000023/2008 excise invoice is not meant for exports
Please give me u r suggestions
Thanks in Advance
Madhu

Dear Madhu,
As per your thread system is telling that invoice is not relevant for the exports so,
Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
I hope it will help you,
Regards,
Murali.

0000000003/2007 excise invoice is not meant for exports.

WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR
0000000003/2007 excise invoice is not meant for exports.
Message no. 4F242

Hi murali,
Do you got any solution to your problem
if you got kindly inform me
cheers
bvdv

0000000005/2007 excise invoice is not meant for exports.

customer fron Switzerland
plz argnt..........

Dear Murali
What exactly your question?? Unless you people be specific and clear in your questions, you wont get proper answer.
Regards
G. Lakshmipathi

Excise Invoice is not posted for Part II

Hi,
During Excise Invoice Posting J1IEX_P the message--> Tax code V8 in procedure TAXINN is invalid
the message comes Tax code V8 is not defined for Tax procedure TAXINN , Where as so far we have not created tax code V8, and it is not there in the drop down list in FTXP & in PO Invoice tab tax code.
(Note --> I would like to inform you that the same message (V8 in procedure.......) was coming in the MIGO and giving the dump , before JMX1 Conditions were maintained, after maintaining the JMX1 , the message was not coming and material document saved with capture excise invoice.)
Awaiting reply & comments on this message.
Thanking you,
Manish Gupta

Check these two threads
[Re: ARE1 creation error - "excise Invoice is not meant for Exports|ARE1 creation error - "excise Invoice is not meant for Exports"]
[Re: ARE1 Error ''000005/2009 Excise Invoice is not meant for Export|Re: ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"]
thanks
G. Lakshmipathi

ARE 1 update error excise modvat account not defined for ARE 1

Hello Expert,
Iu2019m trying to update ARE 1 Document in export scenario, but it shows error -
Excise modvat accounts not defined for ARE1 transaction and K5 excise group
Message no. 8I402
Iu2019ve gone thru Specify G/L Accounts per Excise Transaction in CIN. But exactly in which field we need to maintain the GL.
thanks
GKumar

HI,
You are not giving correct Excise inovice no. in J1IH transaction for cancelling. Because if correct excise invoice number is not given then also system give the same error. So please check the excise invoice number carefully
Please check SPRO => Logistic General => Taxes on Goods movement => India => Outgoing Documents => Specify Default Excise Group and Series Group, whether you have assigned the related G/L Account for the given combination with Excise Invoice Type
You will Check following G/L are maintained or not in "Specify G/L account per excise Transaction"
maintain GL account for ETT ARE1 in table J_1IEXCACC for field Mod.Clearing field name is J_1ICLEAR
Cenvat Suspanse G/L
RG23A BED
RG23A ECS
RG23A AT1
Also Check following under "Specify Excise account per excise Transaction"
CEIV CR Credit MSUSP CENVAT suspense account
CEIV DR Debit PLAAED PLA AED account
CEIV DR Debit PLAAT1 PLA AT1 Account
CEIV DR Debit PLABED PLA BED account
CEIV DR Debit PLAECS PLA ECS Account
CEIV DR Debit PLASED PLA SED account
CEIV DR Debit RG23AED RG 23 AED account
CEIV DR Debit RG23AT1 RG 23 AT1 Account
CEIV DR Debit RG23BED RG 23 BED account
CEIV DR Debit RG23ECS RG 23 ECS Account
CEIV DR Debit RG23SED RG 23 SED account
Thanks,
Raviteja
Edited by: Ravi Teja.T on Feb 2, 2012 9:55 AM

ERROR - Excise modvat accounts not defined for CEIV transaction and excise

Hi friends,
I have created excise invoice J1IS- and release to account in J1IV.When I trying to cancel excise invoice in J1IH -> CANCEL excise invoice.ssystem giving error Excise modvat accounts not defined for CEIV transaction and excise I have check account in customization for CEIV and excise group the following accounts are already assign.
CEIV          CR Credit     MSUSP CENVAT suspense
CEIV          DR Debit     PLAAED PLA AED account
CEIV          DR Debit     PLAAT1 PLA AT1 Account
CEIV          DR Debit     PLABED PLA BED account
CEIV          DR Debit     PLASED PLA SED account
CEIV          DR Debit     RG23AED RG 23 AED
CEIV          DR Debit     RG23AT1 RG 23 AT1
CEIV          DR Debit     RG23BED RG 23 BED
CEIV          DR Debit     RG23ECS RG 23 ECS
CEIV          DR Debit     RG23SED RG 23 SED
where I have to assign modvat account please help me.
Regards,
Chetan

Dear Chetan
Go to IMG -- Logistics-General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction.
There, check whether for series group, company code, chart of accounts, you have maintained CEIV. It should have been missing at your end and hence the problem. Maintain the required G/L Account in the above area and retry.
thanks
G. Lakshmipathi

Error : Excise modvat accounts not defined for GRPO transaction and U1 exci

I have Created Impot PO, After Planned Delivery cost MIRO I am trying to Perform GR then its giving Error "Excise modvat accounts not defined for GRPO transaction and U1 excise group
Message no. 8I402"
I have already maintained GL account in "Specify G/L Accounts per Excise Transaction" for Excise group U1
This problem is coming when Additional Duty on custom condition type JADC is maintained in "Maintain Excise Defaults" node in the column "ADC Cond" . If I remove JADC condition type from this place the this error is not coming but AED column is not fetching any value while doing GR.
Please help me in this issue , still No answer
Edited by: shiwanshu singh on Jan 28, 2009 10:26 AM

Dear sir
For GRPO have you maintained sub transaction Type IP for your excise group U1. If you not maintained pl maintain . and assign G/L account to modvat clearing account , the G/l account should be same as company code CVD account.
Regards
jrp

Error - Excise modvat accounts not defined for DLFC transaction and 01 exci

Dear All,
Getting below error while doing J1IIN - Posting Excise invoice for Sale.
"Excise modvat accounts not defined for DLFC transaction and 01 excise group"
I checked with the settings GL are assigned to for DLFC and 01 excise group.
Is anywhere else I need to mantain the modvat GL
Regards,
Rakesh

Check if you are using any subtransaction type along with excise transaction type.
Excise group, ETT, company code, sub transaction type (if any), Chart of account, Modvat account (pls maintain all the entries over here) search for modavat clearing field and maintain it.
BR
Edited by: Sujoy on Jan 15, 2010 9:45 AM

Excise invoice does not excist

Dear SAP Gurus,
While depot to depot stock transfer process @ the time for MIGO error came that EXcise invoice does not excist for suppying plant.Is we miss any configuration.
With Regards
Mukul Kumar

if you are trying to enter the excise invoice number created in the sending plant using J1is, if you dont enter the leading zeros system may not recognize the invoice

Excise Invoice can not be capture for RG1 in STO

Hi All,
I created a Purchase order for STO with the help of STO I created Replenishment delivery then JEX Invoice then Excise Invoice. At the time of MIGO I put the Excise invoice no. for capturing the excise duty. now when i am saving the MIGO system generating an error " Excise Invoice can not capture the RG1"
Please throw your valuable suggestion.
Regards
Shambhu Sarkar

Hi ,
I am sure u r doing MIRO w.r.t PO after u have done MIGO of that document...
Check that how many line items u have in MIGO and wether it is coming it MIRO or not...
I would also suggest pl look into the MAP and Standard price in accounting view of material.
Reply.
Dipak

Excise Details are not maintanied for Vendor 0000000957.

Hi,
As per our regular process we are capturing inovie with J1IEX and doing GR in MB01 now i have captured invoice in J1IEX and while making GR with MIGO i am getting error
Excise Details are not maintanied for Vendor 0000000957. , but when i am making GR with MB01 i am not getting any error.
also what configuration required to capture excise invoice and make Gr in MIGO, as capture excise invoice menu is not coming in MIGO in MIGO Exicse tab i can only see only refer excise invoice , only part1 , no exicse registration.
regards,
zafar

Hi,
Do proper setings in Logistics - General -Tax on Goods Movements -India -Basic Settings -Maintain Excise Groups - select your excise group and check settings in MIGO Settings such as EI Capture, Post EI in MIGO, Duty different at GR.
Also ensure that you have maintained excise details for Vendor and Material in J1ID.
Regards,
Vikas

Excise modvat accounts not defined for CAPE transaction and TS excise group

Hi Guys,
Suddenly we are facing issue during exicse invoice capturing with MIGO
system is giving following error
"Excise modvat accounts not defined for CAPE transaction and TS excise group
Message no. 8I402
While in Excise account assignment table CAPE is Linked to Modvat Clearing Account which is further liked to correct GL
Can any one explain the cause of this issue Points will be awarded
Regards,
Ashish

Hi
Pls maintain the following:
1. SPRO->Logistics General -> Tax on Goods Movements -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Pls note the Sub Tansaction type is IP for ETT CAPE.
ETT <b>Sub Trn Type</b>   DC Ind                Account Name
CAPE     IP           CR Credit     ONHOLD CENVAT on hold account
CAPE     IP           DR Debit     ONHOLD CENVAT on hold account
CAPE     IP           DR Debit     RG23AED RG 23 AED account
CAPE     IP           DR Debit     RG23BED RG 23 BED account
CAPE     IP           DR Debit     RG23SED RG 23 SED account
CAPE       IP                   DR Debit             RG23ECS RG 23 ECS account
2. SPRO->Logistics General -> Tax on Goods Movements -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check the G/L accounts for Excise Transaction Type CAPE and maintain the same G/L accounts for ETT CAPE with <b>Sub Trn Type IP</b>.
Hope this clarifies.
Thanks

ARE1 creation error - "excise Invoice is not meant for Exports"

Similar Messages

Maybe you are looking for