Armed Asault issues with OpenAl-EAX mode and Sound Blaster X-Fi XtremeGa

Hello,?Situation:Armed Assault .02 http://www.armedassault.com/Windows XP SP2 Pro Eng with all updateslatest X--Fi WHQL official driverlatest official OpenALgame mode enabled?Problem : randomly missing sounds and issues with sounds placement in 5. ... i would like to know if any else gets these problems with Armed Assault vs X-fi cards?it was better (yet still problematic) wth Audigy 2 ZS?is this driver issue or game development issue ? thanks

http://www.flashpoint985.com/cgi-bin...ST;f=68;t=5638
Message Edited by Rad-Wulf on 2-28-200605:42 PM

Similar Messages

  • Can't have 5.1 channels with logitech Z-5300 and Sound Blaster X-fi Platinum HD

    Hello everyone.
    As the subject says, I can't hear all the 5.1 speakers with the X-fi. I believe is not a technical issue, rather than a connection issue, anyone can help me?
    What I did was buy a RCA cable and connect it from the back of the X-fi to a converter from RCA to the 3 normal green, orange and black cables and those to the back of the Z-5300.
    I configure both in Windows and the Creative Panel that I will use 5.1 connection but in the test I only hear both front speakers.
    I have an updated Windows 7 x64 OS and SB drivers.
    Thank you very much.

    Hey Kok thank you so much for your reply.
    I understand your message, but I hope I can make it work, already did a big investment. What about this decorer?:
    [url=http://www.amazon.com/gp/product/B0057UNPVO/ref=ox_sc_act_title_1?ie=UTF8&m=AD7C755W08DM6" >http://www.amazon.com/gp/product/B0057UNPVO/ref=ox_sc_act_title_1?ie=UTF8&m=AD7C755W08DM6[/url]
    It says that you can input the 3 5.1 signals from the speakers (green, orange and black) and transform it to digital through optical cable. Can it work?
    Or maybe this one?
    [url=http://www.amazon.com/gp/product/B0045UWXB0/ref=ox_sc_act_title_2?ie=UTF8&m=AEKEXTXL2B213" >http://www.amazon.com/gp/product/B0045UWXB0/ref=ox_sc_act_title_2?ie=UTF8&m=AEKEXTXL2B213[/url]
    What do you think?
    Thanks once again kok !!

  • JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers.  What am I doing that has these settings appear?

    JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers.  What am I doing that has these settings appear?

    16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off).  Have you previously been saving PSD files?
    IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on.  The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list.  So long as the file does not have parameters that your chosen format does not support, then this should work for you.
    [EDIT]  Just noticed that you did include 'Crop' in the subject line.  Do you have 'Delete cropped pixels' checked?

  • Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

    I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
    That's great.
    However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
    Here's a video that shows what's going on:
    mac pro issues july 7 - YouTube
    Issue #1
    Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
    When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
    I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
    Issue #2
    This is the second project you'll see in the video.
    After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
    Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
    But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
    So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
    Here are my specs:
    Mac Pro 6,1 (Late 2013)
    3 GHz 8-Core Intel Xeon E5
    64 GB 1867 MHz DDR3 ECC
    AMD FirePro D700 6144 MB (x2)
    OSX 10.9.4
    Firmware: 2.20f18
    What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
    Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
    I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
    This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
    I've reported this issue to adobe.

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Issue with Opening a PDF file

    We have just completed an upgrade of one of our servers executing Reporting Services.   The upgrade was from 2005 to 2008.
    After we have rendered a report and have it saved in PDF format, we start having issues.
    If we try to open the PDF by double clicking on the file name in Windows Explorer, Adobe Reader starts, but sits unresponsive and consumes an excessive amount of CPU cycles.    It never completes the open and we have to kill the Adobe Reader process in Task Manager.
    If we start Adobe Reader, and then use the Menu to do FIle -> Open, the PDF file opens immediately.
    We have attempted both methods using several different versions of Adobe Reader.    The issue occurs on all versions prior to 9.3.
    Since we are a service organization, we are unable to force our clients to upgrade to a more current version of Adobe Reader without providing assurances that this will correct this issue.
    Has anyone else seen this type of issue with opening PDF files rendered by Reporting Services?   And if so, what is the cause and how did you correct it?
    Thanks
    Steve

    Hi there,
    Please find attached a word document which contains the error that comes up when I try to open the PDF file. This PDF was e-mailed to me from one of the Safety companies that I receive e-mails from on a regular basis. I believe I am running Windows XP and the version of Adobe is Adobe Reader X. I hope this is enough info for you.
    Janice Nadeau
    [signatue deleted by host]

  • Issue with opening .PDF files after recalling from Symantec Enterprise Vault

    Good Morning,
    I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old.  Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged.  It is inconsistent as to which files it occurs with.  I am not ready to believe that I have that many corrupt files out there.  I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
    The files are on a network share, but I also tried copying them to my local desktop and still received the error.
    I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
    Thank You
    Brian Dougherty

    Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
    Might have been damaged is pretty cut and dried in its meaning and interpretation.
    There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
    You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

  • Issue with Open Enrolment Link in ESS - Benefits

    Hi Experts,
    We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
    1.       Benefits cost is not appearing in open enrolment Screen
    Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
    2.       URL for Benefits plan Gets disappeared in Open enrolment Screen
    Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
    Could you please let us know if this is related to missing configuration or Java webdynpro code.
    Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
    Regards,
    Shilpa

    In regards to your first question, it could be a date issue for the infotype record.  If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
    Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014.  If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
    Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

  • Compatibility issues with Final Cut Express and Final Cut Pro

    I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
    If I transfer project files from one platform to the other will i run into any issues?
    Thanks for all and any help.

    {quote:title=cuttingedge wrote:}
    If I transfer project files from one platform to the other will i run into any issues?
    {quote}
    Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

  • Help with opening Adobe Reader and downloading updates

    I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
    When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
    So I went to the Adobe download site to download a new copy of Adobe.  When I start the download I get this on the screen:  The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068."  The memory could not be written.  Then two options are listed: click OK to terminate or cancel to debug.  So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer.   A malfunctioning or malicious addon has caused I.E. to close this webpage.
    I don't have AVG running, I do have avast but I've disabled it.  I ran Registry Mechanic and an I.E. erasure program but nothing helps.
    I have gone into I.E. and reduced the security level to its lowest state but no joy.
    So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated.  Thanks, in advance, for your reply.  Jim R.

    Hi Mike..tried that as well but no joy.  A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item." 
    Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief. 
    It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C.  no joy. 
    Sigh...Jim R.
    Jim R.
    Date: Tue, 1 Dec 2009 14:50:27 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help with opening Adobe Reader and downloading updates
    Under the help menu, there is an option to repair the installation of reader. Did you try that?
    >

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Issues with Bex query structures and Crystal Reports/Webi

    Hi experts,
    I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
    Budget $
    Budget %
    Actual $
    Actual %
    Budget YTD
    etc
    if I drag the structure into the Crystal Report detail section with a key figure it displays like this
    Budget $     <null>
    Budget %     <null>
    Actual $     300
    Actual %     85
    Budget YTD     250
    the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
    Actual $     300
    Actual %     85
    Budget YTD     250
    Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
    Business Objects Edge 3.1 SP2
    SAP Int Kit SP2
    OS: Linux
    BW 701 Level 6
    Crystal Reports 2008 V1
    Thanks
    Keith

    Hi,
    Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
    ingo

Maybe you are looking for