Array help for demand meter
I am making a power demand meter that will warn when too much kW is being used. It counts pulses per minute and I am have problems with my arrays. Every minute I would like to record the current pulse count into an array to get 15 entries (minutes). Then remove the first entry (first minute)and places the new one at the bottom of the list. Then it takes the first and last counts, subtracts therefore getting pulses per 15mintes on a rolling scale. I have included my image and just dont know the problem because it doesnt do anything.
Solved!
Go to Solution.
Having the code is more efficient that a screenshot, but a few things to hopefully kick-start you in the right direction.
1. A 60 sec delay is almost always a very bad idea, if you click the stop button, it will take up to a minute to react.
2. I assume the hidden loop on the left supplies the data. As written, a single value is passed to the while loop and never updated. Irregardless of other errors, this will be a problem.
3. The flat sequence is completely unneccesary. Except for timing operations, this is almost always true. LV dataflow will almost always take care of this for you.
4. As currently wired (unless there is a hidden bend in the wire), the Array Subset function is chopping off the first 15 elements of the array, you would rather have the last fifteen elements. A simple method is to reverse the array, take the first 15 elements and reverse again. Seems complicated but the reversals cost you very little and it even works if the array is smaller than 15 elements.
5. The shift register is good for this application, but you should either embed this while loop into your data taking loop with a false constant wired to the stop terminal so it loops once, or just add a shift register to the data taking loop to hold the data. And with an uninitialized SR you are in for some unpredictable behavior.
This all assumes you want to fix the existing code. My suggestion is to look into a state machine, in this way you don't slow down user interactions (like the stop button) waiting for the slow acquisition.
Similar Messages
-
Any help for array question
Hello to All:
I want to tally or count some of the elements that I have in array but not sure how.
I have for example: int myArray[] = {90,93,80,81,71,72,73,74};My objective is to tally all of the 90's, tally all of the 80's and tally all of the 70's.
So, the result that I want to have would look something like the following:
System.out.println ("The total tally number of 90's is " 2 );
System.out.println ("The total tally number of 80's is " 2 );
System.out.println ("The total tally number of 70's is " 4 );I do not want to add these numbers, just want to count them.
Also I want to use a "forloop" to achieve the result intead of just declaring it at 2 or 4 etc..
Any help Thankyou[u]First , This is not exactly what I have to
do for homework. There is a lot more, a lot more
involved with the program that I am working on.
Second, this is an example, an example, an
example of something that I need to achieve.
Third, you are asking for a code, to me that
sounds as if your asking for homework. Fourth,
I did not ask for any rude comments. Fith, in
the future please do not reply to my messages at ALL
if you can not help!!!!
Sixth, We did not ask for lazy goofs to post here.
Seventh, In the future please do not post here. Take a hike - there's the virtual door. -
How can I use two single-dimensional arrays-one for the titles and array
I want to Use two single-dimensional arrays-one for the titles and one for the ID
Could everyone help me how can i write the code for it?
Flower
public class Video
public static void main(String[] args) throws Exception
int[][] ID =
{ {145,147,148},
{146,149, 150} };
String[][] Titles=
{ {"Barney","True Grit","The night before Christmas"},
{"Lalla", "Jacke Chan", "Metal"} };
int x, y;
int r, c;
System.out.println("List before Sort");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);
System.out.println("\nAfter Sort:");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);This is one of the most bizarre questions I have seen here:
public class Video
public static void main(String[] args) throws Exception
int[] ID = {145,147,148, 146,149, 150};
String[] Titles= {"Barney","True Grit","The night before Christmas", "Lalla", "Jacke Chan", "Metal"};
System.out.println("List before Sort");
for(int i = 0; i < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles);
System.out.println("\nAfter Sort:");
for(int i = 0; c < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles[i]);
Generally you don't use prefix (++c) operators in you for loop. Use postfix (c++).
Prefix means that it will increment the variable before the loop body is executed. Postfix will cause it to increment after. -
Need help for setFilterPredicate
Hello community,
beeing quite new with the fascinating Xcode environment, I need your help for a simple thing of NSPredicate.
( Well, only simple for those who know...)
I like to display a set of values in a tableview (tblView), and to filter it with the nice search field (searchField).
What I tried:
1.) creating an array with objects defined in MyData.h with a property named mytext
2.) creating a NSArrayController, contens is the array of 1.
3.) creating an NSPredicate filter in MyModel.m (see below)
4.) Binding the filter to the ArrayController in the "filter predicate"-section : bind to MyModel, model Key Path = myPredicate
Everything looks fine when the app starts. But when I try to change the filter in my search field, I get the message:
[<MyModel 0x100141660> setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key myPredicate.
Here are the codes of interest, all in the implementation section of MyModel.
Whats wrong with it ?
-(id)myPredicate {
NSString *theString = [searchField stringValue ];
NSPredicate *theResult = [NSPredicate predicateWithFormat:@"mytext like %@",theString];
NSArray *hasFound = [theData filteredArrayUsingPredicate:theResult];
printf("Items found : %d\n",(int)[hasFound count]);
return theResult;
-(IBAction)updateFilter:(id)sender
NSString *theString = [searchField stringValue ];
printf(".. recognize search changes \n");
NSPredicate *theResult = [NSPredicate predicateWithFormat:@"mytext like %@",theString];
[arrayCtrl setFilterPredicate:theResult];
[tblView reloadData];
Thanks for helping me out of the mess !Here is the manual for the HP Business Consultant II (HP-19B Financial Calculator)
-
i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
import flash.display.BitmapData;
import flash.display.Sprite;
import flash.events.Event;
import org.papervision3d.materials.BitmapFileMaterial;
import org.papervision3d.materials.BitmapMaterial;
import org.papervision3d.objects.primitives.Sphere;
import org.papervision3d.view.BasicView;
[SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
public class EarthBitmap extends BasicView
private var sphere:Sphere;
public function EarthBitmap()
super(800 , 600);
var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
sphere = new Sphere(earthmaterial,100,20,18);
camera.fov = 25;
scene.addChild(sphere);
addEventListener(Event.ENTER_FRAME,rotateSphere);
public function rotateSphere(evt:Event):void
sphere.yaw(0.2);
singleRender();Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
<![CDATA[
var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
function buttonClickHandler(event:MouseEvent){
var randomProblem:int = Math.floor(Math.random()*(questionsArray.length)); //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
navigator.pushView(questionsArray[randomProblem]);
]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work -
Managed Bean Help for Definition Help
I am working on creating Managed Bean Help for Definition Help as described in ‘19.5.3 How to Create Managed Bean Help’ section of the Web User Interface Developer's Guide fpr ADF. Using JDev Version 11.1.2.1.0.
Thought I had all the artifacts assembled but when I run the log message is: <ELHelpProvider> <_getTranslationMap> ELHelpProvider's helpSourceExpression is null.
Any suggestions would be greatly appreciated.
Here is the managed bean:
public class ELHelpProviderProjRequest extends ELHelpProvider {
public ELHelpProviderProjRequest() {
/* To use the HelpProvider, the EL expression in the helpTopicId attribute must point to a Map, otherwise
* you will get a coerceToType error. */
public Map<String, String> getHelpMap()
Iterator iterator = _HELP_MAP.entrySet().iterator();
while(iterator. hasNext()){
System.out.println("hash map entry " + iterator.next());
return _HELP_MAP;
static private final Map<String, String> _HELP_MAP = new HashMap<String, String>();
static {
// each element [put] can be for a separate helpTopicId attribute
_HELP_MAP.put("MAPHELP_CATEGORY_CAPITAL_DEFINITION", "Map value for credit card definition");
_HELP_MAP.put("MAPHELP_CATEGORY_OTHER_DEFINITION", "Map value for credit card instructions");
} Here is the adf-setting.xml in Application sources / META-INF:
<?xml version="1.0" encoding="windows-1252" ?>
<adf-settings xmlns="http://xmlns.oracle.com/adf/settings" >
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/settings">
<help-provider prefix="MAPHELP_">
<help-provider-class>
com.corpnet.abc.util.ELHelpProviderProjRequest
</help-provider-class>
<property>
<property-name>helpSource</property-name>
<value>#{helpTranslationMap.helpMap}</value>
</property>
</help-provider>
</adf-faces-config>
</adf-settings>Here is the faces-config:
<managed-bean>
<managed-bean-name>helpTranslationMap</managed-bean-name>
<managed-bean-class> com.corpnet.abc.util.ELHelpProviderProjRequest </managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>Here is the helpTopicId in the inputText component:
<af:inputText value="Test" inlineStyle="font-weight: bold;" id="it31" simple="true" helpTopicId="MAPHELP_CATEGORY_CAPITAL" readOnly="true"/>Register the managed-bean as a help provider in the adf-settings xml like:
Example 19-9 Registering a Managed Bean as a Help Provider
<adf-settings xmlns="http://xmlns.oracle.com/adf/settings">
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/settings">
<help-provider prefix="MAPHELP_">
<help-provider-class>
oracle.adf.view.rich.help.ELHelpProvider
</help-provider-class>
<property>
<property-name>helpSource</property-name>
<value>#{helpTranslationMap.helpMap}</value>
</property>
</help-provider>
</adf-faces-config>
</adf-settings>
As you've pointed out, Review section 19.5.3 for more details -> http://docs.oracle.com/cd/E24382_01/web.1112/e16181/af_message.htm#CHDHIGIA
You could also investigate use the OHW product available here: http://www.oracle.com/technetwork/developer-tools/help/index-083946.html -
CLM How to add search-help for extension field(New Company Field) in MA.
Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyChengHello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma -
TreeSet vs Collection.Sort / Array.sort for Strings
Gurus
I am pondering weather to use TreeSet vs the Collections.sort / Array.sort for sorting Strings.
Basically I have a list of Strings, i need to perform the following operations on these Strings
1) Able to list Strings starting with a Prefix
2) Able to list Strings Lexically greater than a String
Any help would be greatly appreciated!
Thanks a bunchSpaceShuttle wrote:
Gurus
I am pondering weather to use TreeSet vs the Collections.sort / Array.sort for sorting Strings.
Basically I have a list of Strings, i need to perform the following operations on these Strings
1) Able to list Strings starting with a Prefix
2) Able to list Strings Lexically greater than a String
Any help would be greatly appreciated!
Thanks a bunchBig-O wise, there's no difference between sorting a list of N elements or inserting them one by one in a tree-set. Both take O(n*log(n)). But both collections are not well suited for looking up string that start with a certain substring. In that case you had better use a Patricia tree (or Radix tree).
Good luck. -
Workflow Start "Failed But Not Blocking Correlation" - Project Server workflow for Demand Management
Hi,
I'm trying to "Create a Project Server workflow for Demand Management" with project server 2013 just like is explained
here.
But when I try to create a new project the implemented workflow failed to start with the follow state message in the job queue: Failed But Not Blocking Correlation.
The detailed error display the follow message:
Exception Starting Workflow: The scope _/SharePoint/default/139e833f-7a85-4ccf-b7a2-b3fea9ce50b9/6799b7e5-e519-40f4-9371-0b3bc3d5c208_ has no workflows under it. HTTP headers received from the server - ActivityId: 52fef415-409b-4545-a9f6-ed75519b425c.
NodeId: My-Computer-Name. Scope: /SharePoint/default/139e833f-7a85-4ccf-b7a2-b3fea9ce50b9/6799b7e5-e519-40f4-9371-0b3bc3d5c208. Client ActivityId : 9ded4d9c-7733-7004-2661-c8977270af98.. Trace: at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest
request, T content) at Microsoft.Workflow.Client.WorkflowManager.StartInternal(String workflowName, WorkflowStartParameters startParameters) at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.StartInstance(String
serviceGroupName, String workflowName, String monitoringParam, String activationKey, IDictionary`2 payload) at Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider.StartWorkflow(WorkflowSubscription subscription, IDictionary`2 payload)
at Microsoft.Office.Project.Server.BusinessLayer.Workflow.StartWorkflow(Guid projectGuid, Guid enterpriseProjectTypeUid, Boolean isNewProject, Guid previousEntepriseProjectTypeUid, Boolean skipStage, Guid stageToSkipTo):
WorkflowExceptionStartingWorkflow (35115). Details: id='35115' name='WorkflowExceptionStartingWorkflow' uid='e3bbb06b-1d38-e311-940a-001cc094718e'.
Error:
WorkflowCannotStartWorkflow (35100). Details: id='35100' name='WorkflowCannotStartWorkflow' uid='e4bbb06b-1d38-e311-940a-001cc094718e'.
Queue:
GeneralQueueJobFailed (26000) - WorkflowStartWorkflow.WorkflowStartWorkflowMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='e5bbb06b-1d38-e311-940a-001cc094718e' JobUID='68ee1040-1d38-e311-940a-001cc094718e'
ComputerName='90f7432c-fbc8-4ebd-86f3-0236ce62661c' GroupType='WorkflowStartWorkflow' MessageType='WorkflowStartWorkflowMessage' MessageId='1' Stage='' CorrelationUID='9ded4d9c-7733-7004-2661-c8977270af98'. For more details, check the ULS logs on machine
90f7432c-fbc8-4ebd-86f3-0236ce62661c for entries with JobUID
68ee1040-1d38-e311-940a-001cc094718e.
with this detailed entries in the log file
10/18/2013 13:47:57.38 Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server Queue
ad3fy Critical Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job
has failed. This is a general error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued
jobs) and the trace log (which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 68ee1040-1d38-e311-940a-001cc094718e. Name of the computer that processed this job: 90f7432c-fbc8-4ebd-86f3-0236ce62661c
(to debug further, you need to look at the trace log from this computer). Failed job type: WorkflowStartWorkf... 9ded4d9c-7733-7004-2661-c8977270af98
10/18/2013 13:47:57.38* Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server Queue
ad3fy Critical ...low. Failed sub-job type: WorkflowStartWorkflowMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages). 9ded4d9c-7733-7004-2661-c8977270af98
10/18/2013 13:47:57.38 Microsoft.Office.Project.Server (0x0948) 0x14F0 Project Server Queue Jobs
ad3fy Medium Error is: GeneralQueueJobFailed. Details: Queue Attributes: 68ee1040-1d38-e311-940a-001cc094718e 90f7432c-fbc8-4ebd-86f3-0236ce62661c WorkflowStartWorkflow WorkflowStartWorkflowMessage 1
9ded4d9c-7733-7004-2661-c8977270af98 . Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified. 9ded4d9c-7733-7004-2661-c8977270af98
Any idea?
Thanks in advance,
Alexander.Hi Alexander,I have seen that error when the workflow manager has not been registered correctly with the PowerShell command - that should be in the docs referenced - or
http://technet.microsoft.com/en-us/library/jj663115.aspx. Let me know if that doesn't appear to be the issue here and I can dig deeper. Best regards, Brian
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page -
Quick sizing for Demand Planning system
Hi All
Our team is required to do quick sizing for a SCM 5.0 Demand Planning system with Livecache. The DEV and QAS is already available but not being used at all but now we need the quick sizing for the production box. I have never done any quick sizing, detailed help is appreciated. I have gone through the service.sap.com/quicksizing for demand planning it shows 3 input tables only for Throughput sizing - Time Series, DP Run, DP Users. The APO functional guys entered some numbers but not sure what to do next as the Calculate Result shows information Iam not able to understand.
What I need from sizing is CPU processor, disk size, memory size, etc in clear detail. Please suggest, Thanks in advance.
Regards
AliHello Ali,
First of all I am not a BASIS consultant and hence it would not be prudent for me to comment on hardware configuration reuqired in your case.
Secondly I do not understand what you mean by Quicksizer has been shut down. It is available online at <a href="http://service.sap.com/quicksizer">Quicksizer Tool</a> in Service Marketplace.
There is good amount of documentation available in the website giving details on the basis of computation of different parameters. Again SCM Hardware Configuration is not just dependent on the number of users but the functional requirements as well.
Thirdly - I cannot explain how SAPS concept is related to SCM Quicksizing. Per my understanding the SAPS concept is an hardware-independent benchmark of throughput which is an indicator of the processing capabilities required at peak loads. SAPS will determines the number and processor speed on your Application Server depending on the processor capabilities. Most hardware vendors provide datasheets with SAPS capabilities.
Suggest you go through the document "Background: Sizing mySAP Business Suite" under Sizing Guidelines >> General Sizing Procedures.
Thanks,
somnath -
Creating search help for a field in AdHoc Query
Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
KirstenHi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten -
Need to restrict values in F4 help for Batch Characteristic
Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
NikhilHi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens -
Search Help for Vendor Feild not getting populated in the Screen Element
Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
RajDear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'. "subtotal
>WRITE: 15 ls_stock-nrmit.
>WRITE 32 lv_stock-dispo.
>WRITE 43 lv_stock-fevor.
>ELSE. "total
>WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful. -
Is there arrays or FOR loops in ABAP?
Hi everyone!
Is there an array and FOR loops in ABAP similar to the C Language?
If there is, please give example. _
Thanks a lot!Hi,
There is no array concept in ABAP but there are field-symbols which are same as pointers in C.As for the FOR loop there is no such command in SAP/ABAP but we do have the do..while and loop...endloop commands.There is also CASE statements and if..endif commands.
Thanks,
Sandeep. -
Search help for SKAT-SAKNR OR SKAT-SAKNR is not working
Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
FROM SKAT
INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
WHERE SPRAS = SY-LANGU.
WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'SAKNR'
PVALKEY = ' '
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'SKA1-SKANR'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = t_SAPGL
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
AvaneetHi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.
Maybe you are looking for
-
IPod Touch won't sync some of my music
I upgraded to OS4 and my entire library was wiped out, which isn't that big of a deal. I copied my music back on, but have found that no matter how many times I try some of my music will not sync to my IPOD Touch. I am pretty sure that it is music pu
-
i have iphoto 9.1.5 0n my imac (10.6.8). when i go to apple store to buy iphoto 9.2.3, it says it's already installed. any ideas?
-
Trading partner not updating in table FAGLFLEXA
Hi All We are in ECC5.0 and we are using new GL. When we post entry tarding partner field updating in BSEG table, but it is not updating in FAGLFLEXA table. Can anybody tell me the what is the reason and soution for the same. Thanks in advance Regard
-
Parsing Huge Fixed length files
Hi All, I have a requirement to parse a fixed lenght file which is of size 100MB. I have 1.7 million records in that file where each and every record is of length 41. When I am trying to load the file using the LineNumberReader and using the substrin
-
I'm new to EJB 3.0. I have an application (example on internet), I try to run it but always fail. My Application using Sun App Server 9. Development tool: Net Beans 6. Here is message from console: init: init: deps-jar: compile: library-inclusion-in-