[AS2 CS3/4] Embed external FLV into an MC using AS2 with timeline control

Hi, Is there anyway to skip the process of manually embedding
FLVs into SWF files? I want to load FLVs just as I would an
external SWF.
I've searched all over and all i can find is how to load FLVs
into a FLVPlayer component with stop, play and controls to skip in
time intervals.
What I need is the ability to load an external FLV and be
able to control it as if it were in a MC on the timeline, not as a
streaming video.
There are SO many questions out there about the FLVPlayer its
really polluted any and all search results i've tried.
Shedding some light on this for me would be greately
appreciated!!!

For anyone looking for an actual solution to this issue. If
you're exporting movies out of After Effects, you can export as a
SWF.
The only reason I didn't know about this solution is that its
not included in the render que options, so just select your comp,
go to File > Export and select the setting for exporting as a
SWF.
Thank you kglad for the info

Similar Messages

How to sync the album and track info that I entered into a CD using iTunes with the actual disc?

Hello,
I recently recorded some cover songs, and I imported them into iTunes. So, after entering the track info (track names and album art) into each track using "Get Info", I burned them to a CD. I was completely shocked that the track info and album artwork did not get inputted onto the CD. So, I entered the track info, but could not add the album artwork.
How to add the album artwork is not as important a question. But it's one of my 2.75 questions.
My other issue is that the info that I put on the CD using iTunes is only visible within iTunes. Therefore, I cannot get the track names elsewhere.
My 2.5 questions are:
1) How do I get the track and album info to display in Windows Explorer and Windows Media Player (and the touchscreen CD Player in the car)?
2) How do I add digital album artwork to the CD (so that it shows on the touchscreen CD Player in the car - if iPods have the artwork and it shows on the car's screen, a CD should be able to show the artwork on the car's screen, when talking about limitations of the car)
2.5) How do I make that artwork display across everywhere I plug that disc into?
2.75) How do I ensure that when others import my CD, my artwork, track names, and album name also import from the CD?
I have already burnt the CD, so I would prefer a way to tweak the properties of the already burnt CD rather than burning a whole new disc.
Thank you!
-Royce

1) Metadata visibility in Windows Explorer and/or Windows Media Player depends on OS version and file type. The mp3 format has the widest support. As for the touchscreen CD Player in your car who can say? If it can play data discs the results will be better than with audio CD. If it can display CD text then this option should be selected when creating an audio CD.
2) Artwork cannot be attached to the tracks on an audio CD. If your car system supports it all then it will be with data discs. Check the specifications of the system for the media types it can support on a data disc.
2.5) Simply ensure the artwork is embedded in the tag.
I have two scripts that can help with this, CreateFolderArt and EmbedFolderArt.
The scripts have a slightly different purpose.
CreateFolderArt ensures that every album folder ends up with a Folder.jpg image which is the art that iTunes already knows about. Side effects are that if artwork has been updated in iTunes the folder art should be updated also, and if any track from the album doesn't have embedded artwork it gets embedded.
EmbedFolderArt was actually written for someone who already had various artwork images stored in the folders and wanted them added to their tracks, but not if iTunes had already downloaded a better quality image.
2.75) Again, use a data disc format. Note that you should not be giving away copies of copyrighted material.
Audio CDs are finalized, you cannot change any properties of them unless they are on rewritable media in which case you can erase the whole disc and start over.
tt2

How to embed jnlp file into html page using object tag

hi everyone,
i have written one jnlp file like this.
<?xml version="1.0" encoding="utf-8" ?>

<jnlp spec="1.0+" codebase="http://localhost:9080/base/" href="SampleExample.jnlp">
     <information>
          <title>Demo Application</title>
          <vendor> </vendor>
          <description>Sample Demo Application</description>
          <offline-allowed/>
     </information>
     <security/>
     <resources>
          <j2se version="1.3+" />
          <jar href="common.jar" main="true" download="eager" />
          <jar href="classes12.jar" download="eager" />
          <jar href="toplink.jar" download="eager"/>
          <package name="com.applet.*" part="applet" recursive="true"/>
     </resources>
     <applet-desc name="grid" main-class="com.applet.PriceGrid" width="1000" height="300"/>
</jnlp>
i am trying embed that jnlp file using object tag like
<OBJECT
classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" WIDTH="1000" HEIGHT="300" NAME="grid">
<PARAM NAME="jnlp" VALUE="http://localhost:9080/base/SampleExample.jnlp">
</OBJECT>
but i am not able to load the applet using Web Start.
Can anyone please help me. This is very Urgent for me.
Thanks & Regards,
Shiva.

thanks.
i am giving my problem clearly. i have one applet. Previously i am loading the applet in my html page using object tag like this...
<OBJECT
classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" WIDTH="1000" HEIGHT="300" NAME="grid">
<PARAM NAME="CODE" VALUE="com.adp.base.applet.PriceGrid.class" >
     <PARAM NAME="ARCHIVE" VALUE="common.jar,classes12.jar,toplink.jar" >
     <PARAM NAME="NAME" VALUE="grid" >
<PARAM NAME="type" VALUE="application/x-java-applet">
<PARAM NAME= "cache_option" VALUE ="no">
</OBJECT>
now what i need to do is
i need load the applet only first time using web start and when ever the applet code changes in the server i need to reload the applet.
for that i kept all the applet resources in .jnlp file.i want to cache all the resources which are in .jnlp file and applet must be displayed within a web page within a browser.
Webstart always open a new application windows.
I need to run an Applet embedded within a web page within a browser.
Is there a way to still use Webstart?

Embed YouTube video into SCORM (HTML5) using Captivate 7?

Hi there,
I am using Captivate 7 to produce a SCORM compliant HTML5 course - this course includes a video, however when I have tried to upload the video directly, it pauses/doesn't play well in our LMS. As such I wanted to try embedding/streaming the video from Youtube instead. The video is unlisted (as it is an internal course). I've had a hunt of the forums but can't seem to work out how to do this?
Note: When I try going to Video > Insert Video, then Event Video > Already Deployed... entering the Youtube url - It doesn't work and I receive the following message: "Failed to load the video file. The file parth or the URL may be invalid. Do you want to change the file part or the URL". I am using Adobe Captivate 7 version 7.0.1.237 (in case it helps).
Any and all help appreciated.
Nicole

Thanks for the quick response!
Re: Widget - does it work with HTML5? I found a couple forums that seemed to suggest it doesn't...
Also, when you say the full YouTube URL - where do I get this from? I (embarrassingly) didn't realise there were two different ones.
Thanks again,
Nicole

I have a Seagate 3TB external hard drive and was using it with time machine on my old system with Snow Leopard and it was working smoothly. I have now upgraded to Mavericks and when I tried setting up time machine again, it did not work.

The OS does not detect the drive when I start the system, but Disk Utility shows the disk as an external drive. I seem to be going around in circles. Please take a look at the following screen grabs for the errors I am getting.

But When I verify The sub-partition in the Disk (disk4s2), it asks me to repair disk. When I try to repair disk, it gives me this error.

How can I embed an iCal into iWeb in the new Lion OS/Cloud setup?

I have found information on how to do this in the old software, but nothing on how to embed an iCal into my website (using iWeb) with the newest OS. "Publish" no longer exists.

If iCal can not publish a calendar, then with or without iWeb, the calendar is not available.
Find another calendar, such as Google's :
http://www.google.com/search?q=google+calendar
Edit :
http://www.google.com/search?q=html+calendar

Flash Player 9 pausing on intial load of external FLV

After upgrading my Flash player to version 9, I get a very
noticeable pause when loading an External FLV into a custom FLV
player that doesn't happen on versions 7 and 8. There is a
buffering/loading animation movie clip that also locks upafter the
initial call to the NetStream.play method. The longer the video,
the longer the pause. The video eventually plays but this initial
behavior is definitely undesired.
I also noticed that the browser (IE 6.0.2900) itself locks up
(reports as Not Responding) if you try to resize,move or click on
the address bar while the unexpected pause is taking place.

Hi Stylianos!
Navigate to
HD > Library > Internet Plug-Ins: In here do you see a file named Flash Player.plugin?
If so, click on it once to highlight it.
Depress the Command + I keys, to get info.
What version does it say it is?
ali b

When I call an external program from Labview, how can I embed the interface into the front panel?

I'm running Labiew 6i for Linux. I'm using a system exec.vi to call an external program to do image manipulation (since there is no IMAQ for linux). How can I embed the user interface of the external program into the front panel of Labview?

As far as I know, the only way to embed other GUIs in LabView is an ActiveX in a container.
As long as you are using Linux, try to place (moving them on the desktop ) the two windows linked (like those 3 of WinAmp).

Warning for Continuous Looping External flv or f4v as2

Malfunction issued in Continuous Looping External flv or f4v in as2 from containers created in Flash Professional CS6 with code
on (complete){
this.autoRewind=true;
this.play();
solution: always make a new document!
Mystic problems with x times resized documents, at media 2 or 3 times play and then not playing external fly/f4v

use:
kglad wrote:
if all your buttons are attached to the same parent:
on(press) {
s = new Sound(this);
    s.setVolume(100);
    _parent.mcPlayer.seekToNavCuePoint("pict1");
    mcPlayer.play();
on (release) {
    i = -100;
    s = new Sound(_parent);
    s.setVolume(0);
    gotoAndStop("reset");
on (release) {
    i = -100;
    s = new Sound(_parent);
    s.setVolume(100);
    gotoAndStop("hold");

Embed an external view into a tabbed menu

Hi All,
I'm a beginner in WebDynpro Java.
Could you please help me to embed an external view into a tabbed menu in WebDynpro Java?
Please help with your solutions.
Thank you.
Regards,
Sari

hi sari,
     Inside tabbed menu you can't use external view.
     For your problem you can do .
     1. copy your external view ui element from root elements..
     2. paste into seprate tabs.
Another Solution
     1. Inside window controller you can create view set in two division..
     2. First Devision for your navigation menu .
     3. Second Devision For your External views
Thanks & Best Regards
Aasif Shah

Load external FLV files?

I would like my desktop AIR app (built in Flash CS3) to load
and play external FLV files which are on the same computer/hard
drive but are not packaged as part of the AIR app. Is there a way
to do this with the sandbox restrictions AIR has? If so can you
point me to a sample or documentation?
Excuse me if this is an obvious subject but the information
out there is incomplete and confusing.

I'm still running into the following: As soon as I test the
movie, I get the following in the area where the video should
appear:
status (0 seconds)
Level: status
Code: NetStream.Play.Start
status (0.434 seconds)
Level: status
Code: NetStream.Buffer.Flush
status (4.898 seconds)
Level: status
Code: NetStream.Play.Stop
It doesn't matter if I click the button or not. The video is
on my network.

NaN with loading external flv

Hi all
I'm having some strange diffulties which I can't solve.
I'm starting off with a website.swf which loads different
external swf's depending on the button that has been pressed.
One of those swf's is a file with different buttons to load
different external flv's.
While loading a flv a progressbar shows the percentage of the
loaded part of the flv
Now: If I play the first video file everything works fine
While switching to another button to load another flv during
the loading of the first flv, My percentage says NaN. and stops
loading.
On each button I say:
on (press) {
stream_ns.close();
connection_nc.close();
_parent.videoloader_mc.unloadMovie();
on (release) {
_parent.videoloader_mc.loadMovie("movies/binnenkomers01.swf");
This is the part I use for loading a flv in f.ex
binnenkomers01.swf.
stop();
delete _global.loaded_interval;
delete _global.connection_nc;
delete _global.stream_ns;
delete _global.pctLoaded;
// video URL
video1_url = "movies/binnenkomer06_Floriane.flv";
_global.connection_nc = new NetConnection();
connection_nc.connect(null);
_global.stream_ns = new NetStream(connection_nc);
videoholder_mc.video.attachVideo(stream_ns);
stream_ns.play(video1_url);
stream_ns.seek(0);
// Zet de video op stop om te wachten tot hij volledig is
ingeladen
stream_ns.pause();
_global.playstatus = "pauze";
play_pauze_mc.gotoAndStop("pauze_lb");
this.createEmptyMovieClip("progressBar_mc",
this.getNextHighestDepth());
progressBar_mc.createEmptyMovieClip("bar_mc",
progressBar_mc.getNextHighestDepth());
with (progressBar_mc.bar_mc) {
beginFill(0xCCE6FF);
moveTo(0, 0);
lineTo(300, 0);
lineTo(300, 23);
lineTo(0, 23);
lineTo(0, 0);
endFill();
_xscale = 0;
progressBar_mc.createEmptyMovieClip("stroke_mc",
progressBar_mc.getNextHighestDepth());
with (progressBar_mc.stroke_mc) {
lineStyle(0, 0xCCE6FF);
moveTo(0, 0);
lineTo(300, 0);
lineTo(300, 23);
lineTo(0, 23);
lineTo(0, 0);
progressBar_mc._x = 640;
progressBar_mc._y = 400;
this.createTextField("loaded_txt",
this.getNextHighestDepth(), 0, 0, 200, 22);
loaded_txt._x = 645;
loaded_txt._y = 405;
var my_fmt:TextFormat = new TextFormat();
my_fmt.color = 0x333333;
my_fmt.font = "Verdana";
my_fmt.size = 9;
my_fmt.align = "left";
_global.loaded_interval = setInterval(checkBytesLoaded, 500,
stream_ns);
function checkBytesLoaded(stream_ns) {
trace("my_ns.bytesLoaded: "+stream_ns.bytesLoaded);
trace("my_ns.bytesTotal: "+stream_ns.bytesTotal);
_global.pctLoaded =
Math.round(stream_ns.bytesLoaded/stream_ns.bytesTotal*100);
trace("_global.pctLoaded: "+_global.pctLoaded);
loaded_txt.text = "loading... "+pctLoaded+"%";
loaded_txt.setTextFormat(my_fmt);
progressBar_mc.bar_mc._xscale = pctLoaded;
if (isNaN(pctLoaded)) {
clearInterval(loaded_interval);
} else {
trace("OK");
if (pctLoaded>=100) {
clearInterval(loaded_interval);
Hope you guys can help me....

Maybe they have hotlink protection enabled
"indierockmedia" <[email protected]> wrote
in message
news:f3c4mo$ddn$[email protected]..
> Hi, I am having trouble with some loading issues. I
design ecards for
> bands and
> their tour dates, bio, and video files all load external
files (text files
> for
> bio/tour, flv files for the video, and an swf skin file
for the video).
> Its
> only a problem when I have to embed those ecards into
sites that don't
> host the
> ecard. I have used crossdomain.xml and every fix ive
read about, and still
> have
> issues. Let me detail below:
>
> For example, I have an ecard for a band at
>
http://bandwebsite.com/ecard/ecard.swf
> The tour and bio and video files load simply "tour.txt,
bio.txt,
> video.flv,
> skin.swf"). Works great because no external servers are
being called.
>
>
But when I want to embed the file elsewhere, or use different
domains,
> I
> have issues:
> I want to embed the ecard on to
http://www.otherwebsite.com,
so I can't
> have
> it simply call "tour.txt" for example, the ecard will
think the tour file
> comes
> from www.otherwebsite.com/tour.txt. So I call the full
path
>
http://bandwebsite.com/ecard/tour.txt
> I go to the ecard and click the button to load the tour
dates. The text
> box
> that worked before says "undefined". So I put a cross
domain file at the
> root
> of
http://bandwebsite.com that
allows access to files from
> www.otherwebsite.com. Still getting undefined. I go to
the embed code for
> flashobject and have allowscript access to "always".
Still undefined. I go
> and
> add System.security.allowDomain to my timeline and
specify
> www.otherwebsite.com. Still undefined. Still won't load
my video or video
> skin
> and text files.
>
> Am I missing something?
>
> mikey
>

Existing 'load external .flv' code?

Recently, I found a great little Flash project that acts like a jukebox for external mp3 song files, and am using it on my website to play my song demos.
I'm now trying to find if there is an existing solution like that for video. I just need some way to progressively download video files from my webspace when the thumbnail is clicked... and am now looking into some sort of Flash jukebox.
I've tried just embedding the video files into HTML, but they don't progressively download for some reason (even though they are saved as Progressive With Compressed Header). I've even tried using prettyPhoto (...a script that mimics a Lightbox like feature, where the whole page dims, and a floating window appears over your site, displaying any media, and allowing you to move back/forth through your list of media)..... works great, but again, not a progressive download, so you stare at a blank screen for a while.
Seems the only way it works is if I have the file on YouTube or some other site, then embed it or use the prettyPhoto app.
So, can someone either tell me how to make the embedded file download (OT, but I figured I'd ask), or point at some existing Flash file that serves as a video jukebox, showing all media on a common window?

Hi,
You can load external .flv files which is placed on your web server. You have to add a small amount of AS3 code into your flash document. Please click on the below link
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/media/Video.html
Please use the sample code which is provided in the bottom of the page. In the code, you will find a line
private var videoURL:String = "Video.flv";
In the above line, instead of "Video.flv", you have to give your webserver path like http://www.domainname.com/foldername/videofilename.flv
(The above code does the progressive download of an video)
You can play the video through progressive download, by click on an image. To achieve that, you need to place the above code inside the mouse click function of an image.
Thanks

LoadMovie- loading an external swf into movieclip in AS3

Im extremely frustrated.........im trying to do something
that was once very simple, which has now become over complicated
unecessecarily.....i want to do a simple loadMovie type action and
load an external clip into a movieclip called ph. my AS2 code would
be:
loadMovie("ExternalMovieClip.swf","ph");
or
on(release) {
loadMovie("ExternalMovieClip.swf","ph");
This no longer works. Can somebody tell me the new code that
i would use with AS3 to do exactly what i just demonstrated? I
honestly dont even want to touch AS3. The only reason i want to use
it is because it makes skinning the components SOOOOOO much easier
than AS2. That is the one and only reason im trying to convert to
AS3. All the new load movie AS3 examples ive seen on google look
like half a page long to do what i used to do in 2 lines. There
must be a simpler and much easier way. I am a designer. It looks to
me like Adobe went back to making flash for programmers only again
leaving us designers out of the mix. Someone please help me, im
desperate. I also have other old code that im sure im going to have
to convert to AS3 for it to still work, and i may eventually need
help with that as well, but ill stick with this loadMovie problem
for now. Any and all help is appreciated. Thanks

have a look here:
http://www.smithmediafusion.com/blog/?p=381
use this:
var i =new Loader();
i.load(new URLRequest(”yourSwf.swf”));
myMC.addChild(i)
myMC is the name of your clip on the stage.
Dan Smith > adobe community expert
Flash Helps >
http://www.smithmediafusion.com/blog/?cat=11
http://www.dsmith.tv

Controlling external flv with ActionScript

I'm using the NetStream Class to control the playback of an
external flv. I've got a Pause/Play button using .pause, and Fast
Forward and Rewind buttons using .seek. What I want to do is once
the video is done playing to automatically reset back to the
beginning of the video, allowing the user to press play to view the
video again without having to reload the page. Right now when the
video finishes, the user has to rewind the video in order to watch
it again. I thought I could use .time to determine when the video
reaches the end to go back to "0" in the video playhead but so far
I have not been able to get this to work. Any ideas would be
appreciated. Currently everything is done in frame one of the swf.
Thanks.

>>I think obviously there is a difference between FMS
and Flash MX04. The documents I
>>refer to are built into the help menu in Flash 7 and
8 both include the onStatus event
>>and absolutely no onPlayStatus event.
Yeah you're right onPlayStatus isn't in the NetStream class
Flash documentation as this is more about using this class for
progressive download, whereas the documentation i linked to
referred to the NetStream class used in FMS Client-side scripting
for streaming video.
>>I made a mistake. I meant NetStream.Play.Stop –
which was very poorly named. That
>>is what onStatus will return when it reaches the end.
It isn't really "stop" it is "complete."
>>So I tend to read it as such!
NetStream.Play.Stop does seem to be very similar to
NetStream.Play.Complete in progressive downloads. however i know
you can't guarantee that NetStream.Play.Stop occurs at the same
time as NetStream.Play.Complete in a streaming video through FMS,
as a NetStream.Play.Stop can occur for reasons other than
completion.
>>...My guess is that when they took the bits from FMS
into Flash MX04 they didn't do a
>>very good job. They purposefully renamed onPlayStatus
to onStatus...
onStatus does still exist in FMS Client side scripting...
>> – with a limited variety of events returned
(What is Switch?)
switch refers to playlists - only relevant to FMS streams.
Anyway, it appears as though all of this talk of the FMS is
moot regarding the original poster, as I've just had a look at
skauty's posts in the Flash Media Server forums, ironically, and
discovered that skauty is using progressive download and not FMS...
Simple but important distinction...

[AS2 CS3/4] Embed external FLV into an MC using AS2 with timeline control

Similar Messages

Maybe you are looking for