ASA 5505 unable to connect inside or outside

Question

Hello,
I'm extremely new to router configurations, and am attempting to configure a backup ASA 5505 to use as a temporary access point in the event that our main ASA becomes unavailable. What I have done is loaded the running config from our main ASA onto the backup, and have made changes to necessary routes, IPs, etc. I can connect to it from a remote computer without problem, but I cannot access any of our servers, nor can I access the internet. I have also tried modifying the access list and NAT rules every which way from Sunday, but I still cannot get this thing to allow any information through. I keep getting "failed to locate egress interface for UDP from outside" errors.
We are using Cisco AnyConnect to connect , and mind you, since the config for this backup ASA was taken from our main, it still has the original certificate info and profiles. I was told that this wouldn't matter, but I thought I should mention in case I need to remove any of it from the config.
Here is part of the config file. I took out some information, but tried to keep it understandable. If anyone could point me in the right direction, it would be greatly appreciated!
ciscoasa# show running-config
: Saved
: Serial Number: xxxxxxxxxxx
: Hardware:   ASA5505, 512 MB RAM, CPU Geode 500 MHz
ASA Version 9.2(2)
hostname ciscoasa
domain-name domain
enable password encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd encrypted
names
ip local pool pool1 x.x.9.22-x.x.9.254 mask 255.255.255.0
interface Ethernet0/0
 switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
 nameif inside
 security-level 100
 ip address x.x.8.10 255.255.255.0
interface Vlan2
 nameif outside
 security-level 0
 ip address x.x.x.237 255.255.255.248
boot system disk0:/asa922-k8.bin
boot config disk0:/startup-config
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns domain-lookup inside
dns domain-lookup outside
dns server-group Default
 name-server x.x.8.100
 domain-name domain
same-security-traffic permit intra-interface
object network obj_any
 subnet 0.0.0.0 0.0.0.0
object network pool1
 subnet x.x.9.0 255.255.255.0
object network outside-network
 host x.x.x.237
object network Remote-Network
 subnet x.x.8.0 255.255.255.0
object network local
object network obj-x.x.9.24
 host x.x.9.24
object-group network Outside-Network-Group
 description Outside Network Group
 network-object x.x.x.232 255.255.255.248
object-group network Inside-Network-Group
 description Inside Network Group
 network-object x.x.8.0 255.255.255.0
access-list inside_access_in extended permit icmp any any
access-list inside_access_in extended permit ip any any
access-list NONAT extended permit ip x.x.8.0 255.255.255.0 x.x.9.0 255.255.255.0
pager lines 24
logging enable
logging buffer-size 30000
logging buffered debugging
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination inside x.x.8.132 2055
flow-export template timeout-rate 1
flow-export delay flow-create 50
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
asdm image disk0:/asdm-722.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static any any destination static pool1 pool1 no-proxy-arp route-lookup
nat (inside,outside) source static any any destination static Remote-Network Remote-Network no-proxy-arp route-lookup
nat (outside,outside) source dynamic pool1 interface
object network obj_any
 nat (inside,outside) dynamic interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 x.x.x.232 1
route inside x.x.11.0 255.255.255.0 x.x.11.1 1
If you have any questions, or need any other information, please let me know.
Thanks!

Answer 1

Am I posting this in the wrong section? Anyone?