Ask javascript code for radion button on dashboard section

hello guys, i'm newbie here.i want to ask how can we get the value for radio button that wechoose example i have 2 rb, rb1 and rb2.If i click rb1 then it will alert "rb1" and if clickrb2 then it will alert "rb2" i also want to ask can we make radio button to be an array ofobject?cause i try to type the same name on rb1 and rb2, and it refuseto use the same name. last question, where can i learn about javascript and dashboardeffectively ? cause i'm still new for this stuff <img src="i/expressions/face-icon-small-tongue.gif" border="0"> thanks before

You just have to set the required property of each field to false:
getField("text1").required = false;
getField("text2").required = false;
// repeat for any other fields

Similar Messages

How to set Function Code for Radion Buttons in Screen painter

Hi,
I have faced problem of grouping 3 radio buttons in screen painter (no graphical editor). How to do it?
I have checked similiar threads in SDN, but those are for graphical editor.
Radio Buttons in custom screeen
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Regards,
Sukhbold

Hi,
U want to create radio button in the selection screen then u can create like this
PARAMETERS : c1 AS CHECKBOX USER-COMMAND cd,
r1 RADIOBUTTON GROUP rad,
r2 RADIOBUTTON GROUP rad.
AT SELECTION-SCREEN OUTPUT.
IF c1 = 'X'.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '0'.
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,

Func- Code for Radio-button in Module-pool Prg.

Hi Friend's.
I have define 2 Radio button
on Module-pool screen.
I am not been able to triger the Radio button in
Pai .
How can i assign the function code for
radio-button in module-pool.
pls can any one help me

Hi,
For radion buttons, what ever the name you will give that name only will hold that value ( Either selected or not ). But this variable should be declared as global variable in main program.
Still if you want to assign function code, you can assign one like other fields on the screen.

Function code for execute button

Hi,
I have a requirement like this...
there is a program for selective deletion from a data target by a transaction called delete_facts.
this generates a program for selective deletion. when i run this report there comes one screen asks for selections fields and then again excute it then deletion will happen.
But this program i need to modify for certain default values so as to avoid entering of the values in the selection screen.
i will use default value this will solve my 1st purpose but since this program has to be scheduled from process chain, the 2nd execute funtionality( once the values appear in the screen) shud be automated.
can anybody tell me how to do this that is after program runs values will be passed to selection screen and selection screen shud not be shown and execute shud happen automatically.
this is the code generated by transaction delete_facts:
*& Report ZTEST_DELETE1
REPORT ZTEST_DELETE1.
generated Header from i_sel_repid
generated REPORT (RSDRD)
(should be deleted after use)
Generated by..: SALAGUN
Date/Time.....: 20070322 / 051426
*REPORT GP457FUV92GJS4663HYHXLYC9Q7 .
generated Tables from i_t_tables
                 and i_datatarget
TABLES:
SSCRFIELDS,
/BIC/SZTESTBC
,/BI0/SCHNGID
,/BI0/SRECORDTP
,/BI0/SREQUID
,/BI0/SDATE
,/BI0/SUNIT
generated DATA/TYPES
TYPE-POOLS: RSDRD, RSDQ.
DATA:
L_INTERACTIVE      TYPE RS_BOOL,
L_ANSWER(1)        TYPE C,
L_TYPE(1)          TYPE C,
L_PARALLEL         TYPE I,
L_NO_OF_ROWS       TYPE I,
L_NO_OF_ROWS_C(10) TYPE C,
L_TITEL            TYPE RS_CHAR72,
L_TEXT1            TYPE RS_CHAR72,
L_TEXT2            TYPE RS_CHAR72,
L_S_RANGE          TYPE RSDRD_S_RANGE,
L_S_SELTXT         TYPE RSDQ_S_SELTEXT,
L_SX_SEL           TYPE RSDRD_SX_SEL,
L_T_MSG            TYPE RS_T_MSG,
L_THX_SEL          TYPE RSDRD_THX_SEL,
L_T_SELTXTS        TYPE RSDQ_T_SELTEXT
                          WITH HEADER LINE.
generated SELECTION-SCREEN from i_t_selscr
SELECTION-SCREEN BEGIN OF BLOCK B001 WITH FRAME TITLE T001 .
SELECT-OPTIONS C001 FOR /BIC/SZTESTBC-/BIC/ZTESTBC
default 'D' TO 'C'.
SELECTION-SCREEN   END OF BLOCK B001 .
SELECTION-SCREEN BEGIN OF BLOCK B002 WITH FRAME TITLE T002 .
SELECT-OPTIONS C002 FOR /BI0/SCHNGID-SID .
SELECT-OPTIONS C003 FOR /BI0/SRECORDTP-SID .
SELECT-OPTIONS C004 FOR /BI0/SREQUID-SID .
SELECTION-SCREEN   END OF BLOCK B002 .
SELECTION-SCREEN BEGIN OF BLOCK B003 WITH FRAME TITLE T003 .
SELECT-OPTIONS C005 FOR /BI0/SDATE-DATE0 .
SELECTION-SCREEN   END OF BLOCK B003 .
SELECTION-SCREEN BEGIN OF BLOCK B004 WITH FRAME TITLE T004 .
SELECT-OPTIONS C006 FOR /BI0/SUNIT-UNIT .
SELECTION-SCREEN   END OF BLOCK B004 .
SELECTION-SCREEN BEGIN OF BLOCK B005 WITH FRAME TITLE T005 .
PARAMETERS L_PA TYPE DBMAN_PARALLEL_DEGREE DEFAULT '01'.
DATA L_P1(1) TYPE C.
PARAMETERS L_NL TYPE DBMAN_NO_LOGGING AS CHECKBOX DEFAULT ' '.
PARAMETERS L_SR TYPE DBMAN_SHOW_REPORT AS CHECKBOX DEFAULT ' '.
SELECTION-SCREEN   END OF BLOCK B005 .
generated body from i_t_body
generated INITIALIZATION from i_t_init
                         and i_t_seltexts
                         and i_batch_allowed
                         and i_datatarget
INITIALIZATION.
T001 = 'product'.
T002 = 'Data Package'.
T003 = 'Time'.
T004 = 'Unit'.
T005 = 'Options'.
SELECTION-SCREEN FUNCTION KEY 1.
MOVE 'Execute in Bckgrnd' TO SSCRFIELDS-FUNCTXT_01.
PERFORM RESTRICT_SEL_OPTIONS(SAPLRSDRD).
SET TITLEBAR 'SELECTION' OF PROGRAM 'SAPLRSDRD' WITH
' Delete selected entries from the data target DELETE '.
L_S_SELTXT-NAME = 'C001'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Base Code'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C002'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Change Run ID (SID)'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C003'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Record type (SID)'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C004'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Request ID (SID)'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C005'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Calendar Day'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'C006'.
L_S_SELTXT-KIND = 'S'.
L_S_SELTXT-TEXT = 'Unit of measure'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'L_PA'.
L_S_SELTXT-KIND = 'P'.
L_S_SELTXT-TEXT = 'Parall. deg. during reconstruc'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'L_NL'.
L_S_SELTXT-KIND = 'P'.
L_S_SELTXT-TEXT = 'Switch off logging drng recons'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
L_S_SELTXT-NAME = 'L_SR'.
L_S_SELTXT-KIND = 'P'.
L_S_SELTXT-TEXT = 'Display generated report'.
APPEND L_S_SELTXT TO L_T_SELTXTS.
generated AT SELECTION-SCREEN OUTPUT from i_sel_repid
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
     EXPORTING
          PROGRAM                     = 'GP457FUV92GJS4663HYHXLYC9Q7'
     TABLES
          SELTEXTS                    = L_T_SELTXTS
     EXCEPTIONS
          PROGRAM_NOT_FOUND           = 1
          PROGRAM_CANNOT_BE_GENERATED = 2
          OTHERS                      = 3.
generated AT SELECTION-SCREEN
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'ONLI'.
    L_INTERACTIVE = RS_C_TRUE.
WHEN 'OPTI'.
WHEN 'DELS'.
WHEN 'FC01'.
    L_INTERACTIVE = RS_C_FALSE.
    SSCRFIELDS-UCOMM = 'ONLI'.
WHEN 'OTHERS'.
ENDCASE.
generated END-OF-SELECTION from i_t_selopt
                           and i_del_repid
                           and i_datatarget
                           and i_gen_mode
END-OF-SELECTION.
IF NOT C001[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = 'ZTESTBC'.
LOOP AT C001 .
    CLEAR L_S_RANGE.
    MOVE C001-SIGN TO L_S_RANGE-SIGN.
    MOVE C001-OPTION TO L_S_RANGE-OPTION.
    MOVE C001-LOW TO L_S_RANGE-LOW.
    MOVE C001-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C002[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0CHNGID'.
LOOP AT C002 .
    CLEAR L_S_RANGE.
    MOVE C002-SIGN TO L_S_RANGE-SIGN.
    MOVE C002-OPTION TO L_S_RANGE-OPTION.
    MOVE C002-LOW TO L_S_RANGE-SIDLOW.
    MOVE C002-HIGH TO L_S_RANGE-SIDHIGH.
    MOVE RS_C_FALSE TO L_S_RANGE-KEYFL.
start change
    DESCRIBE FIELD C002-LOW TYPE l_type.
    IF l_type = 'I'.
      CONDENSE L_S_RANGE-LOW.
      CONDENSE L_S_RANGE-HIGH.
    ENDIF.
stop change
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C003[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0RECORDTP'.
LOOP AT C003 .
    CLEAR L_S_RANGE.
    MOVE C003-SIGN TO L_S_RANGE-SIGN.
    MOVE C003-OPTION TO L_S_RANGE-OPTION.
    MOVE C003-LOW TO L_S_RANGE-SIDLOW.
    MOVE C003-HIGH TO L_S_RANGE-SIDHIGH.
    MOVE RS_C_FALSE TO L_S_RANGE-KEYFL.
start change
    DESCRIBE FIELD C003-LOW TYPE l_type.
    IF l_type = 'I'.
      CONDENSE L_S_RANGE-LOW.
      CONDENSE L_S_RANGE-HIGH.
    ENDIF.
stop change
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C004[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0REQUID'.
LOOP AT C004 .
    CLEAR L_S_RANGE.
    MOVE C004-SIGN TO L_S_RANGE-SIGN.
    MOVE C004-OPTION TO L_S_RANGE-OPTION.
    MOVE C004-LOW TO L_S_RANGE-SIDLOW.
    MOVE C004-HIGH TO L_S_RANGE-SIDHIGH.
    MOVE RS_C_FALSE TO L_S_RANGE-KEYFL.
start change
    DESCRIBE FIELD C004-LOW TYPE l_type.
    IF l_type = 'I'.
      CONDENSE L_S_RANGE-LOW.
      CONDENSE L_S_RANGE-HIGH.
    ENDIF.
stop change
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C005[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0CALDAY'.
LOOP AT C005 .
    CLEAR L_S_RANGE.
    MOVE C005-SIGN TO L_S_RANGE-SIGN.
    MOVE C005-OPTION TO L_S_RANGE-OPTION.
    MOVE C005-LOW TO L_S_RANGE-LOW.
    MOVE C005-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
IF NOT C006[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0UNIT'.
LOOP AT C006 .
    CLEAR L_S_RANGE.
    MOVE C006-SIGN TO L_S_RANGE-SIGN.
    MOVE C006-OPTION TO L_S_RANGE-OPTION.
    MOVE C006-LOW TO L_S_RANGE-LOW.
    MOVE C006-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
L_PARALLEL = L_PA.
IF L_INTERACTIVE EQ RS_C_TRUE.
CALL FUNCTION 'RSDRD_SEL_DELETION'
       EXPORTING
            I_DATATARGET   = 'DELETE'
            I_THX_SEL           = L_THX_SEL
            I_AUTHORITY_CHECK   = RS_C_TRUE
            I_NO_LOGGING        = L_NL
            I_PARALLEL_DEGREE   = L_PARALLEL
            I_SHOW_REPORT       = L_SR
       CHANGING
            C_T_MSG             = L_T_MSG.
ELSE.
    CALL FUNCTION 'RSDRD_BUILD_REPORT_FOR_BATCH'
         EXPORTING
          I_REPID        = 'GP457FWJUK1J1F3ZIZZOEH9U533'
          I_DATATARGET   = 'DELETE'
          I_GEN_ONLY          = RS_C_FALSE
          I_THX_SEL           = L_THX_SEL
          I_AUTHORITY_CHECK   = RS_C_TRUE
          I_NO_LOGGING        = L_NL
          I_PARALLEL_DEGREE   = L_PARALLEL
          I_SHOW_REPORT       = L_SR
     CHANGING
          C_T_MSG             = L_T_MSG.
ENDIF.
Thanks in advance,
Vijaya

hi!
Function code for execute button is 'ONLI'.
try ur code using it!!
Reward points if it helps.
Regards,
Neha Bansal.
Message was edited by:
        Neha Bansal

Need help to write code for 'Print" button......!

Hi all,
I am working in oracle forms 6i.I am creating forms for ordering product/quantity(Entering quantity/product details). In my form i have "Print button" to print the quantity details which is in multi-record block(database item).Please help me of how to write code for print button. If u had any source code please post it.
Please help asap......!
Thanks
regards,
jame

You haven't got an answer or a reply because this question is asked so many times.
Why don't you search the forum to find them?

On file open: "This document contains JavaScript code for a widget that no longer exists."

I had an existing, functional datepicker in a web page.
Recently I downloaded the UI Datepicker in the Widget Browser and installed it in DW CS5. Now every time I load the file that calls the datepicker that I added myself, a warning opens with the following text:
This document contains JavaScript code for a widget that no longer exists. If you don't remove the code, the browser might display JavaScript errors when loading the page. Would you like Dreamweaver to find all instances of this code for you?
Widget: $("#reservDateBegin").datepicker();
Widget: $("#reservDateEnd").datepicker();
Clicking "Yes" opens the file and shows the search box at the bottom of the window with [current document] in File and $("#reservDateEnd").datepicker(); in Matched Text. Clicking "No" just opens the file.
The error is wrong, since installing the widget is what caused the error in the first place!
How can I get DW to stop showing this message?
Thanks for any help.

I do understand you're trying to be helpful. I was just hoping providing the relevant code snippets would be sufficient so I didn't have to take the time to provide a "cleaned" version of the files and upload those to a public-safe location.
Zabeth69 wrote: If you don't understand what 'code at the bottom of the page' means, you have not used one of those systems. I don't know what causes the error code to come up (besides removing a Spry widget, I mean). So if it doesn't apply to you, ignore it.
This is exactly my point: I haven't used any of the DW "systems". I've always manually coded in DW, so I can't have removed a Spry widget in the first place. It wasn't until I installed the Widget using the Widget Browser that I started getting the error (I don't mean adding the datepicker widget to the code using the DW Insert menu - I mean installing the Widget into DW itself). Ignoring such an erroneous/incorrect error seems kind of silly, since every time I open the file I get the error message.
Anyway, as requested, the following are links to the contactUsCleaned.php page, and the php included headerCleaned.php file. Since these use php includes to complete the rendered HTML, they won't look right in the browser, but as you know viewing the source will show the relevant html, javascript, and jquery code. I didn't see any way to upload the files in this forum, which, due to the php code, would be preferable to see exactly what my code looks like...
http://www.eventidewebdesign.com/public/contactUsCleaned.php
http://www.eventidewebdesign.com/public/headerCleaned.php
The footer.php file the contactUs page includes is simply a set of HTML links to the pages on the site, copyright info, and the Google Analytics script. There is no other code in the footer.php file.

Code for 'enter' button in user command.

hi experts,
i have developed a initial screen as selection screen for table control.
data is displayed in second screen(table control).
when user enters inputs in selection screen and presses enter on keyboard
it should execute to second screen. code for enter button. 

Hello,
in the PBO process should you have the next code:
for example:
case sy-ucomm.
when 'ENTER'.
CALL SCREEN 0200. " The second window
when 'SAVE'.
when ...
endcase.
You should have all conditions in the case statement, otherwise you have a error.
Regards,

Select all and dselect all can any body provide a code for these buttons

hi
i have taken 4 buttons for select all and dselect all and sort up and sort down can any body provide a code for these buttons.
thanks

hi,
Refer this link...
code for select_all and deselect_all in modulepool

Code for execute button on selection screen to get result

hi experts,
I need a help for writing a code for execution button on selection screen.Like in normal report on abap editor
we insert selection criteria like number and we get the result according that particular number on next screen.
same thing i am trying here also. So i am writing a code on button that when i press the button it will go to the next
screen according to the selection criteria.
Plz help me helpful answers are appriatiated !!!
Thanks & regards
Vipul Gupta

hi,
In the OnAction write :
1. get the values entered in selection criteria using :
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
 DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
 DATA ls_cn_check TYPE wd_this->element_cn_check.
 DATA lv_ca_check LIKE ls_cn_check-ca_check.
navigate from <CONTEXT> to <CN_CHECK> via lead selection
 lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
get element via lead selection
 lo_el_cn_check = lo_nd_cn_check->get_element( ).
get single attribute
 lo_el_cn_check->get_attribute(
 EXPORTING
 name = `CA_CHECK`
 IMPORTING
 value = lv_ca_check ).
Now lv_ca_check has your value entered in Selection criteria.
2. write the select query to fetch data according to selection criteria.
 select * from <table> into correponding field of table <internl table>
 where Field = lv_ca_check.
3. Now in the internal table <internl table> you have values according to search criteria.
4. Bind the internal table with node which is binded to table to show data.
lo_nd->bind_table( internaltable ).
I hope it is clear .

What is the Ok-code for Exicute button?

what is the Ok-code for Exicute button?

Hi,
There are 2 ways to find an ok-code.
1. Click on the button you need, keep the left button of the mouse pushed, and push 'F1' on your keyboard. SAP will tell you the ok-code for the button you need.
OR
2. Use transaction SHDB and simulate your transaction.
Please reward if it helps.
Philippe.

Making Page look same in All Pixels & Writing code for Submit Button.

Hello All,
How to make the page look the same in all computers even though the pixels are different?
Please help me in this regard.
More Over if I want write the code for Submit button where the code should be written.
Whether the code is different from normal ABAP coding?
Warm Regards,
SampathKumar G.

Hi Sampath,
You can trigger mandatory field checks in WDA as in R/3. For this you need to make the "state" property of your input field to "required".
In addition to this you need to call the static method check_mandatory_attr_on_view of class cl_wd_dynamic_tool. This would then automatically verify if all the mandatory fields have been filled or not. It would then populate the error messages into an internal table and display them in the view. Also the mandatory fields which haven't been filled would be highlighted with a red border. You need to put the below coding into the action up on which you want to trigger the data chesks.
data: lt_msg TYPE cl_wd_dynamic_tool=>t_check_result_message_tab,
          lo_view_controller TYPE REF TO if_wd_view_controller,
          lo_message_manager type ref to if_wd_message_manager.
lo_view_controller ?= wd_this->wd_get_api( ).
lo_message_manager = lo_view_controller->get_message_manager( ).
cl_wd_dynamic_tool=>check_mandatory_attr_on_view(
    EXPORTING
      view_controller = lo_view_controller
      display_messages = abap_true
    IMPORTING
      messages = lt_msg ).
Regards,
Uday

How to add a custom PL/SQL code for a button event handler

Hi All,
I am a toddler in using Oracle Portal. So please forgive me for my ignorance.
Q : How do I add a custom PL/SQL code for a button event handler?
Basically, I would like to write MY PL/SQL function and call it. I could see that we can write "CUSTOM" code as "PL/SQL button event handler" in the form design window. But the question is that it expects only a "call" to procedure. But where do I define the procedure then? If I insert the procedure from the backend, it gets flushed the next time I compile my form.
Hope I am able to explain my point.
Thanks in advance,
Abbas.

Hi All,
I am a toddler in using Oracle Portal. So please forgive me for my ignorance.
Q : How do I add a custom PL/SQL code for a button event handler?
Basically, I would like to write MY PL/SQL function and call it. I could see that we can write "CUSTOM" code as "PL/SQL button event handler" in the form design window. But the question is that it expects only a "call" to procedure. But where do I define the procedure then? If I insert the procedure from the backend, it gets flushed the next time I compile my form.
Hope I am able to explain my point.
Thanks in advance,
Abbas.

Executing javascript code for button click

in my application i have report page where i am displaying table data when i click a button it selects first row and returns it using htp.prn() now i m getting that record in jvascript now i want to execute this java script code when the button is clicked i tried using onClick attribute but it didn't work can anyone tell me how to do it?

Hi,
I think this is related to Application express, right ?
You could post your question in Application Express forum
Oracle Application Express (APEX)
Also please give more detail about your issue. Post e.g. code (pl/sql & javascript) you try to use.
Also if you setup sample about your problem to http://apex.oracle.com will help others to help you.
Help us to help you =)
Br, Jari

Code for send button. I need your help, guys!

I would appreciate a Java code for a "send" button or a "send page" link that would send a complete web page to my email address. I have some forms for my users to fill out online and send them to me, and so the problem I am having is that when I use FrontPage forms (text boxes, check boxes, radio buttons, etc.,)for them to use, I am getting the input from those form only. What I NEED to get is the complete page, exactly what the users see on the screen with all the text in the forms. The need for this is that these forms (reports) will later be printed out, so they MUST look exactly as on the screen.
So I am thinking a bit of Java code could help me out. Would you give me a hand guys? Thanks!

Do some JNI and take a snapshot of the screen, it is the ONLY way I know to ensure EXACTLY what you ask for: even the HTML from the page may look different than what the users sees when filling out the form when that HTML is displayed on a different machine and system.
Otherwise your agument seems a little trivial and you could just replicate the form on your local machine and insert the data you captured with a normal post operation into the local copy of the HTML form.

Security flaw-To use CSOM/Javascript code for Custom Office365(Sharepoint Online) application

Hi,
I've developed custom application in Office365(Sharepoint Online) using CSOM/Javascript. Security team from client side has been reported one major issue to the our application that any end user can comment our CSOM/Javascript code and bypass the validation
or can update / insert into sharepoint list item using developer tool/ Console in Google Chrome(F12 Key).
Also end user can write his own separate code in console of Google Chrome (Developer Tool / F12) and can update / insert into Sharepoint List.
Note:- End user has Add, Edit, View permission on all Sharepoint List.
This is one major security flaw of the Sharepoint/Office365 to use CSOM /Javascript for writing code, to overcome this issue could you please provide me some solution.
Your help would be greatly appreciated!!!
Looking for reply.
Thanks,
Mahesh Sherkar
Web: http://Mahesh-Sherkar.com
Email: [email protected]

Hello Paras,
Did you get any solution for this? I think your website was implemented this form. Can you please tell me the way how I can achieve it? I am also facing same problem. Please reply me as early as possible.
Thanks,
Mihir

Ask javascript code for radion button on dashboard section

Similar Messages

Maybe you are looking for