ASM problem

Dear DBAs , please help.
i came today and i found that the database is not able to write the archivelogs the the storage.
i'm using ASM whith a raw device partions.
after restarting all crs components and the asm services, i tried to go into asmcmd to check the files.
i got this error:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist (DBD ERROR: OCISessionBegin)
can someone help ?

Hi Elie,
Sorry... I found on metalink the issue provided by note 754110.1
Applies to: Oracle Server - Enterprise Edition - Version: 10.1.0.2 to 11.1.0.6 This problem can occur on any platform.
Symptoms
You are seeing the following message in ASM alert.log:
NOTE: ASMB process exiting due to lack of ASM file activity
Cause ASMB runs in a database instance that is using an ASM disk group. ASMB communicates with the ASM instance, managing storage and providing statistics. ASMB can also run in the ASM instance. ASMB runs in ASM instances when the ASMCMD cp command runs or when the database instance first starts if the SPFILE is stored in ASM.
Try mount ASM instance before...
Regards,
Rodrigo Mufalani

Similar Messages

OCR and voting disks on ASM, problems in case of fail-over instances

Hi everybody
in case at your site you :
- have an 11.2 fail-over cluster using Grid Infrastructure (CRS, OCR, voting disks),
where you have yourself created additional CRS resources to handle single-node db instances,
their listener, their disks and so on (which are started only on one node at a time,
can fail from that node and restart to another);
- have put OCR and voting disks into an ASM diskgroup (as strongly suggested by Oracle);
then you might have problems (as we had) because you might:
- reach max number of diskgroups handled by an ASM instance (63 only, above which you get ORA-15068);
- experiment delays (especially in case of multipath), find fake CRS resources, etc.
whenever you dismount disks from one node and mount to another;
So (if both conditions are true) you might be interested in this story,
then please keep reading on for the boring details.
One step backward (I'll try to keep it simple).
Oracle Grid Infrastructure is mainly used by RAC db instances,
which means that any db you create usually has one instance started on each node,
and all instances access read / write the same disks from each node.
So, ASM instance on each node will mount diskgroups in Shared Mode,
because the same diskgroups are mounted also by other ASM instances on the other nodes.
ASM instances have a spfile parameter CLUSTER_DATABASE=true (and this parameter implies
that every diskgroup is mounted in Shared Mode, among other things).
In this context, it is quite obvious that Oracle strongly recommends to put OCR and voting disks
inside ASM: this (usually called CRS_DATA) will become diskgroup number 1
and ASM instances will mount it before CRS starts.
Then, additional diskgroup will be added by users, for DATA, REDO, FRA etc of each RAC db,
and will be mounted later when a RAC db instance starts on the specific node.
In case of fail-over cluster, where instances are not RAC type and there is
only one instance running (on one of the nodes) at any time for each db, it is different.
All diskgroups of db instances don't need to be mounted in Shared Mode,
because they are used by one instance only at a time
(on the contrary, they should be mounted in Exclusive Mode).
Yet, if you follow Oracle advice and put OCR and voting inside ASM, then:
- at installation OUI will start ASM instance on each node with CLUSTER_DATABASE=true;
- the first diskgroup, which contains OCR and votings, will be mounted Shared Mode;
- all other diskgroups, used by each db instance, will be mounted Shared Mode, too,
even if you'll take care that they'll be mounted by one ASM instance at a time.
At our site, for our three-nodes cluster, this fact has two consequences.
One conseguence is that we hit ORA-15068 limit (max 63 diskgroups) earlier than expected:
- none ot the instances on this cluster are Production (only Test, Dev, etc);
- we planned to have usually 10 instances on each node, each of them with 3 diskgroups (DATA, REDO, FRA),
so 30 diskgroups each node, for a total of 90 diskgroups (30 instances) on the cluster;
- in case one node failed, surviving two should get resources of the failing node,
in the worst case: one node with 60 diskgroups (20 instances), the other one with 30 diskgroups (10 instances)
- in case two nodes failed, the only node survived should not be able to mount additional diskgroups
(because of limit of max 63 diskgroup mounted by an ASM instance), so all other would remain unmounted
and their db instances stopped (they are not Production instances);
But it didn't worked, since ASM has parameter CLUSTER_DATABASE=true, so you cannot mount 90 diskgroups,
you can mount 62 globally (once a diskgroup is mounted on one node, it is given a number between 2 and 63,
and other diskgroups mounted on other nodes cannot reuse that number).
So as a matter of fact we can mount only 21 diskgroups (about 7 instances) on each node.
The second conseguence is that, every time our CRS handmade scripts dismount diskgroups
from one node and mount it to another, there are delays in the range of seconds (especially with multipath).
Also we found inside CRS log that, whenever we mounted diskgroups (on one node only), then
behind the scenes were created on the fly additional fake resources
of type ora*.dg, maybe to accomodate the fact that on other nodes those diskgroups were left unmounted
(once again, instances are single-node here, and not RAC type).
That's all.
Did anyone go into similar problems?
We opened a SR to Oracle asking about what options do we have here, and we are disappointed by their answer.
Regards
Oscar

Hi Klaas-Jan
- best practises require that also online redolog files are in a separate diskgroup, in case of ASM logical corruption (we are a little bit paranoid): in case DATA dg gets corrupted, you can restore Full backup plus Archived RedoLog plus Online Redolog (otherwise you will stop at the latest Archived).
So we have 3 diskgroups for each db instance: DATA, REDO, FRA.
- in case of fail-over cluster (active-passive), Oracle provide some templates of CRS scripts (in $CRS_HOME/crs/crs/public) that you edit and change at your will, also you might create additionale scripts in case of additional resources you might need (Oracle Agents, backups agent, file systems, monitoring tools, etc)
About our problem, the only solution is to move OCR and voting disks from ASM and change pfile af all ASM instance (parameter CLUSTER_DATABASE from true to false ).
Oracle aswers were a litlle bit odd:
- first they told us to use Grid Standalone (without CRS, OCR, voting at all), but we told them that we needed a Fail-over solution
- then they told us to use RAC Single Node, which actually has some better features, in csae of planned fail-over it might be able to migreate
client sessions without causing a reconnect (for SELECTs only, not in case of a running transaction), but we already have a few fail-over cluster, we cannot change them all
So we plan to move OCR and voting disks into block devices (we think that the other solution, which needs a Shared File System, will take longer).
Thanks Marko for pointing us to OCFS2 pros / cons.
We asked Oracle a confirmation that it supported, they said yes but it is discouraged (and also, doesn't work with OUI nor ASMCA).
Anyway that's the simplest approach, this is a non-Prod cluster, we'll start here and if everthing is fine, after a while we'll do it also on Prod ones.
- Note 605828.1, paragraph 5, Configuring non-raw multipath devices for Oracle Clusterware 11g (11.1.0, 11.2.0) on RHEL5/OL5
- Note 428681.1: OCR / Vote disk Maintenance Operations: (ADD/REMOVE/REPLACE/MOVE)
-"Grid Infrastructure Install on Linux", paragraph 3.1.6, Table 3-2
Oscar

Oracle11g R2 Active Data guard using ASM Problem?

I have configured oracle11g r2 RAC on 2 notes using ASM Grid ( OS unix).
RAC is up and running.
Now I am configuring Active data Guard.
Under grid user instance +ASM and listener is running.
Under oracle user static listener is running.
All disk is mounted.
Oracle RAC and Data Guard directory and structure I have keeped same.
Now my problem is below:
$ ./rman target sys/HPinvent123nbl@dcpdb AUXILIARY sys/HPinvent123nbl@drpdb
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jan 16 16:28:32 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DCPDB (DBID=316773134)
connected to auxiliary database: DRPDB (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 16-JAN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=5644 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdcpdb1' auxiliary format
'/u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdrpdb' ;
executing Memory Script
Starting backup at 16-JAN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1897 instance=dcpdb1 device type=DISK
Finished backup at 16-JAN-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/16/2013 16:28:48
RMAN-06136: ORACLE error from auxiliary database: ORA-00200: control file could not be created
ORA-00202: control file: '+data'
ORA-17502: ksfdcre:4 Failed to create file +data
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
RMAN>
Please help.\
Thanks
Solaiman

root@drpdb1 []# id oracle
uid=108(oracle) gid=700(oinstall) groups=701(dba)
root@drpdb1 []# id grid
uid=109(grid) gid=700(oinstall) groups=701(dba),702(asmdba)
Edited by: 876149 on Jan 16, 2013 3:19 AM

ASM Problems

We are attempting to create another database. We have a rac database with 3 instances but we are creating a standalone DR database but when we create ASM we recieve the following error message:
epcclr01dr[+ASM1]-/u01/oracle/10.2.0.3.0/asm/bin >crsctl start
exec(): 0509-036 Cannot load program crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for crsctl.bin because:
0509-136 Symbol Getctype_FPCc (number 108) is not exported from
dependent module /usr/lib/libC.a[ansi_64.o].
0509-136 Symbol Getnumpunct_FPCc (number 112) is not exported from
dependent module /usr/lib/libC.a[ansi_64.o].
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Please help!!!

Oracle doesn't find libCa.a in your PATH, LIBPATH or LD_LIBRARY_PATH or it finds a 32-bit one. As you don't specify a platform it is difficult to help you out.
Please refer to the installation documentation to verify whether you need to set LIBPATH or LD_LIBRARY_PATH.
Sybrand Bakker
Senior Oracle DBA

Duplicate database from ASM to Non-ASM problem

Friends,
I am unable to duplicate the database from ASM TO Non-ASM,
OS: Linux AS4
Oracle version: 10.2.0.1
initAUXDB.ora parameters:
background_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/adump
core_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/cdump
background_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/bdump
user_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/udump
db_name=auxdb
undo_tablespace=undotbs1
undo_management=auto
undo_retention=900
db_block_size=8192
compatible=10.2.0.1
control_files='/u01/oracle/product/10.2.0/oradata/auxdb/control01.ctl'
db_file_name_convert=('+DATA','/u01/oracle/product/10.2.0/oradata/auxdb')
log_file_name_convert=('+DATA','/u01/oracle/product/10.2.0/oradata/auxdb')
db_create_file_dest='/u01/oracle/product/10.2.0/oradata/auxdb'
db_create_online_log_dest_1='/u01/oracle/product/10.2.0/oradata/auxdb'
My target database diskgroup info:
GROUP_NUMBER NAME SECTOR_SIZE BLOCK_SIZE STATE
1 DATA 512 4096 MOUNTED N
2 FLASH 512 4096 MOUNTED E
Please could you have look the following error:
type1:
Note: when I configure The log_file_name_convert=('+DATA') in initAUXDB.ora parameter file, the following error are occurring:
RMAN> run {
2> allocate auxiliary channel C1 device type disk;
3> duplicate target database to auxdb;
4> }
Starting Duplicate Db at 03-MAR-13
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/03/2013 14:43:05
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_3.259.809008171 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_2.258.809008167 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_1.257.809008165 conflicts with a file used by the target database
type2:
when I configure The log_file_name_convert=('+FLASH') in initAUXDB.ora, again I am getting the following error:
RMAN> run {
2> allocate auxiliary channel C1 device type disk;
3> duplicate target database to auxdb;
4> }
allocated channel: C1
channel C1: sid=36 devtype=DISK
Starting Duplicate Db at 04-MAR-13
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/04/2013 08:37:10
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_3.263.809008169 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_2.262.809008165 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_1.261.809008163 conflicts with a file used by the target database
Please suggest me to overcome the above errors.

Hi Mr.Rao,
Thank you for your reply..
I follwed as per as your query, but I am getting different error:
channel C1: starting datafile backupset restore
channel C1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077 <---------here the directory structure is "/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/" but I mention in initauxdb.ora parameter only "/u01/oracle/product/10.2.0/odata/auxdb/".
restoring datafile 00002 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
restoring datafile 00003 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
restoring datafile 00004 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: reading from backup piece +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-19870: error reading backup piece +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-19505: failed to identify file "+FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569"
ORA-17503: ksfdopn:2 Failed to open file +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-15001: diskgroup "FLASH" does not exist or is not mounte
failover to previous backup
channel C1: starting datafile backupset restore
channel C1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077
restoring datafile 00002 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
restoring datafile 00003 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
restoring datafile 00004 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: reading from backup piece /u01/backup/prod/df_t809162421_s24_p1
channel C1: restored backup piece 1
piece handle=/u01/backup/prod/df_t809162421_s24_p1 tag=TAG20130304T072021
channel C1: restore complete, elapsed time: 00:01:17
Finished restore at 04-MAR-13
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "AUXDB" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_1.261.809008163',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_1.257.809008165' ) SIZE 50 M REUSE,
GROUP 2 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_2.262.809008165',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_2.258.809008167' ) SIZE 50 M REUSE,
GROUP 3 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_3.263.809008169',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_3.259.809008171' ) SIZE 50 M REUSE
DATAFILE
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077'
CHARACTER SET WE8ISO8859P1
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: starting archive log restore to default destination
channel C1: restoring archive log
archive log thread=1 sequence=12
channel C1: restoring archive log
archive log thread=1 sequence=13
channel C1: reading from backup piece /u01/backup/prod/al_t809162496_s26_p1
channel C1: restored backup piece 1
piece handle=/u01/backup/prod/al_t809162496_s26_p1 tag=TAG20130304T072136
channel C1: restore complete, elapsed time: 00:00:04
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_12_809008161.dbf thread=1 sequence=12
channel clone_default: deleting archive log(s)
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_12_809008161.dbf recid=2 stamp=809171585
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_13_809008161.dbf thread=1 sequence=13
channel clone_default: deleting archive log(s)
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_13_809008161.dbf recid=1 stamp=809171583
channel C1: starting archive log restore to default destination
channel C1: restoring archive log
archive log thread=1 sequence=14
channel C1: reading from backup piece +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-19870: error reading backup piece +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-19505: failed to identify file "+FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567"
ORA-17503: ksfdopn:2 Failed to open file +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-15001: diskgroup "FLASH" does not exist or is not mounte
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/04/2013 09:53:11
RMAN-03015: error occurred in stored script Memory Script
RMAN-20506: no backup of archivelog found
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 1 seq 14 lowscn 542329 found to restore

Fresh cluster inst., servers reboot, cannot restart clusters or ASM

Hello all,
I just installed 11Gr2 cluster over 5 nodes. I used ASM in the installer, to hold the voting disk, etc for it.
I installed the RDBMS binairies successfully across all nodes. NO INSTANCES YET.
A few days went by....
I was getting ready to do post installing patches...and found things looking strange. I found the (working on node1), the clustering systems was not running.
I looked, and the servers (all 5 of them) for some reason had rebooted since install.
I tried starting the cluster:
crsctl start cluster -all.
Took while to return, and then errored with a timeout msg.
I checked to see if it was up:
./crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4533: Event Manager is online
It then dawned on me...maybe ASM wasn't up either?
Nope...not running.
I tried to start it locally on node 1
I set the SID, and tried using sqlplus
I got:
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/init+ASM1.ora'
I looked...nothing in that directory at all but a simple init.ora file.
I tried shutting down the cluster with
crsctl stop cluster -all
I got a ton of messages for each node like:
CRS-4548: Unable to connect to CRSD
CRS-2678: 'ora.crsd' on 'node1' has experienced an unrecoverable failure
CRS-0267: Human intervention required to resume its availability.
I'm trying to get through to Oracle support, but they're running slow.
Any ideas here?
I used OUI to create ASM for the cluster...why would it not put an init file there to point to the spfile in ASM?
I'm guessing this is the reason the nodes couldn't talk or sync. Trouble is...how do I start ASM without an init file? I seem to recall there might be a way to create a file to point to the ASM for the spfile, but I'm new to this too...and not sure where to point or the syntax to use.
Will have starting cluster up with no ASM have done any damage...if so, how to fix it?
As you can tell, learning about clusters/RAC and ASM....and I'm not finding good reference materials on troubleshooting. Heck, the install docs are bad enough....
Thank you in advance for any advice or links...
cayenne
ps. this is on RHEL5
Edited by: cayenne on Aug 10, 2010 12:33 PM

ssolbach wrote:
Hi,
Try doing crsctl stop crs -f 2 times. Sometimes this is needed.
crsctl check crs should report you that nothing is running anymore.
If it is... then only way I can think of is disable the automatic startup of crs
crsctl disable crs
and restart the node... This will definitely bring everything down (and does not start it up after restarting).
You can then start the crs stack with crsctl start crs.
Furthermore don't get confused with oracleasm.
Oracleasm is for asmlib. Which may be used in preparating the storage for ASM but has nothing to do later with if ASM is running or not.
To check the status of ASM first see if clusterstack was started successfully (you need to wait a little till it is started):
crsctl check crs.
Everything should be online... if it is, you can do a crsctl stat res -t which will show you all ressources including if ASM is running.
If there has been a problem starting up the stack (crsctl check crs) then we have to find out why.
Check $CRS_HOME/log/<hostname>/alert*.log for error messages.
If something indicates a problem with ASM do a:
adrci
show alert
and choose the ASM alert.log.
Search for error messages.
GL.
SebastianThank you, I'd not known of adrci before!! Once I set the ORACLE_HOME, it came right up!
Ok, it does look like ASM problem...and clustering can't find the voting disc.
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM1/trace/+ASM1_dia0_25186.trc:
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM1/trace/+ASM1_dia0_25186.trc:
ORA-27508: IPC error sending a message
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM1/trace/+ASM1_o000_22504.trc (incident=4801):
ORA-00603: ORACLE server session terminated by fatal error
ORA-27504: IPC error creating OSD context
ORA-27300: OS system dependent operation:if_not_found failed with status: 0
ORA-27301: OS failure message: Error 0
ORA-27302: failure occurred at: skgxpvaddr9
ORA-27303: additional information: requested interface 192.168.100.1 not found. Check output from ifconfig command
Incident details in: /u01/app/oracle/diag/asm/+asm/+ASM1/incident/incdir_4801/+ASM1_o000_22504_i4801.trc
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM1/trace/+ASM1_gmon_25212.trc:
ORA-29746: Cluster Synchronization Service is being shut down.
ORA-29702: error occurred in Cluster Group Service operation
GMON (ospid: 25212): terminating the instance due to error 29746
opidrv aborting process O000 ospid (22504) as a result of ORA-603
Ok, I've been going through the alert log, and the .trc files it indicates. I started by checking the private address 192.168.100.1...it seems to be up with ifconfig..and pingable.
I'm looking through errors...the one : ORA-27300 returning a value 22 got a hit on Oracle Support...but wasn't the same errors as I got.
Whew...still plowing through all the files and logs...not seeing anything out there so far that matches my problem...dunno what could have caused this to just all go BANG. I mean...no one but me using the machines, no databases on them yet...all that was installed was clustering with its voting disk and (ocr?) on a single ASM disk group....and RDBMS binaries installed across all 5 nodes.
Please let me know if you see anything that stands out here...I'm still searching myself...
Again, thanks for the adrcpi hint!!
cayenne

Oracle startup with Windows

We have Oracle 10g (x64) installed on a Windows XP Pro x64 computer, along with ASM. When the computer reboots, both instances start up, but the database instance doesn't actually open the database on startup. So far, I've checked some registry settings (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraDb10g_home2) to make sure that autostart was set to true (which it was). I don't know of anything else to check or change to get the database to actually fully start with Windows. We're having this problem with several computers and I'm hoping somebody can help.

jbo5112 wrote:
We have Oracle 10g (x64) installed on a Windows XP Pro x64 computer, along with ASM. When the computer reboots, both instances start up, but the database instance doesn't actually open the database on startup. So far, I've checked some registry settings (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraDb10g_home2) to make sure that autostart was set to true (which it was). I don't know of anything else to check or change to get the database to actually fully start with Windows. We're having this problem with several computers and I'm hoping somebody can help.My word you've had some interesting answers. Oracle provides the ORADIM utility as mentioned already to manage oracle database services on windows. You can see the syntax by issuing the command on it's own in a cmd window - eg
ORADIM: <command> [options]. Refer to manual.
Enter one of the following command:
Create an instance by specifying the following options:
     -NEW -SID sid | -SRVC srvc | -ASMSID sid | -ASMSRVC srvc [-SYSPWD pass]
[-STARTMODE auto|manual] [-SRVCSTART system|demand] [-PFILE file | -SPFILE]
[-SHUTMODE normal|immediate|abort] [-TIMEOUT secs] [-RUNAS osusr/ospass]
Edit an instance by specifying the following options:
     -EDIT -SID sid | -ASMSID sid [-SYSPWD pass]
[-STARTMODE auto|manual] [-SRVCSTART system|demand] [-PFILE file | -SPFILE]
[-SHUTMODE normal|immediate|abort] [-SHUTTYPE srvc|inst] [-RUNAS osusr/ospass]
Delete instances by specifying the following options:
     -DELETE -SID sid | -ASMSID sid | -SRVC srvc | -ASMSRVC srvc
Startup services and instance by specifying the following options:
     -STARTUP -SID sid | -ASMSID sid [-SYSPWD pass]
[-STARTTYPE srvc|inst|srvc,inst] [-PFILE filename | -SPFILE]
Shutdown service and instance by specifying the following options:
     -SHUTDOWN -SID sid | -ASMSID sid [-SYSPWD pass]
[-SHUTTYPE srvc|inst|srvc,inst] [-SHUTMODE normal|immediate|abort]
Query for help by specifying the following parameters: -? | -h | -helpThe above from a 10.2 database install gives you the clue that
1) You don't need to delete and recreate, you'll be able to edit the service.
2) The current parameter for the password for sysdba access is -SYSPWD though in older versions it was -INTPWD.
In addition you should certainly check the Oracle alert log for errors on attempted startup, and the oradim.log for errors encountered when the database itself is started by oardim (you'll find this in %ORACLE_HOME%\database . If I were guessing then I'd hazard a guess that the ASM instance was not fully open before the database was started. The alert log will tell you that.
If you do find it's the ASM problem then a couple of solutions present themselves.
1) don't rely on automatic start, but set the services to manual and then schedule a shell script at startup that starts the services using "net start servicename"
2) Edit the OracleServiceSID to make it dependent on the ASM service using the procedure in http://support.microsoft.com/kb/193888
Niall Litchfield
http://www.orawin.info/

Pacman Errors: Installing ndiswrapper

I'm currently installing Arch-Linux on my laptop, and everything has gone well. But, I am having a little trouble using Pacman to install Ndiswrapper on my machine. I first attempted to install it, and it appeared to download all the dependencies and packages. It then spit out a huge error, and when I attempted to install once again - I got the same error:
[root@asuka ~]# pacman -S ndiswrapper
resolving dependencies...
looking for inter-conflicts...
Targets (9): wireless_tools-29-2 ndiswrapper-utils-1.53-1 klibc-1.5.15-1
klibc-extras-2.5-2 klibc-udev-135-2 filesystem-2009.01-1
mkinitcpio-0.5.21-1 kernel26-2.6.28.1-1 ndiswrapper-1.53-4
Total Download Size: 0.00 MB
Total Installed Size: 107.00 MB
Proceed with installation? [Y/n] y
checking package integrity...
(9/9) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
klibc: /usr/lib/klibc/include/asm/Kbuild exists in filesystem
klibc: /usr/lib/klibc/include/asm/a.out.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/acpi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/agp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/alternative-asm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/alternative.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/arch_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/asm-offsets.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/auxvec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bitops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/boot.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bootparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bug.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bugs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/byteorder.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cache.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cacheflush.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/calgary.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/calling.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/compat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cpufeature.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cputime.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/debugreg.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/delay.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/desc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/desc_defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/device.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/div64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dma-mapping.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dma.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/edac.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/elf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/emergency-restart.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/errno.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fcntl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/floppy.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/frame.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/futex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/gart.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/geode.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/highmem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hpet.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hypertransport.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i387.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i8253.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i8259.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ia32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ia32_unistd.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/idle.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/intel_arch_perfmon.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ioctl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ioctls.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/iommu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ipcbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irqflags.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/k8.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kdebug.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kexec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kmap_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kprobes.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ldt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/lguest.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/lguest_hcall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/linkage.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/local.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/apm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/do_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_traps.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/pci-functions.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/smpboot_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/do_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/math_emu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mc146818rtc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mca.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mca_dma.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mce.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mman.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmx.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/module.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mpspec_def.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msgbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msidef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msr-index.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msr.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mtrr.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/nmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numaq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/param.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/paravirt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/parport.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci-direct.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pda.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/percpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgalloc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-2level-defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-2level.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-3level-defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-3level.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/poll.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/prctl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor-cyrix.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor-flags.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/proto.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ptrace-abi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ptrace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/reboot.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/reboot_fixups.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/required-features.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/resource.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/resume-trace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rio.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rtc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rwlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rwsem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/scatterlist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sections.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/segment.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sembuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/serial.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/setup.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/siginfo.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/signal.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/smp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/socket.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sockios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sparsemem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/srat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/stacktrace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/stat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/statfs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/swiotlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sync_bitops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/system.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/system_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tce.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/termbits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/termios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/therm_throt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/time.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/timex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tlbflush.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/topology.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tsc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ucontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unaligned.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unwind.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vga.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vgtod.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vm86.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vmi_time.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/voyager.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vsyscall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/hypercall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/hypervisor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/interface.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor_64.h exists in filesystem
Errors occurred, no packages were upgraded.
I'm not quite sure what to think of this. I was hoping someone would know a way I can resolve this from happening?
Any information will be much appreciated.
Thank you!
Last edited by azurepancake (2009-01-23 19:49:17)

Welp, I've come to the conclusion that I am either doing something wrong, or that my installation source (USB flash drive) somehow is corrupt.
I've been avoiding removing the 'asm' symbolic link on my laptop and everything has been going pretty smoothly, but today I decided to install Arch on my desktop computer. I have a Nvidia card and when installing the drivers using Pacman, it runs into conflicts - just like it did when trying to download and install Ndiswrapper.
So, thinking that the asm problem was isolated to my laptop, I went ahead and deleted the symbolic link:
rm /usr/lib/klibc/include/asm
I then list the contents of the 'include' directory and the 'asm-x86' directory is still there and the symbolic link is removed. Perfect.
So I reboot and everything goes smoothy. I install the Nvidia drivers and then decide to examine my 'include' directory again. Oddly enough, the 'asm-x86' directory is gone, and a new directory called 'asm' exists! It appears to have all the same files within. As I expected, I reboot and it drops me into the ramfs command prompt with very limited commands. Now I am not sure if the above is the reason why this keeps happening to me, but it is just something I noticed that changes.
I got curious, loaded Arch from my USB drive, mounted my root partition and then tried to recreate the original directory structure, but no go.
Pacman is awesome and makes things so much easier to install. I'd hate to have to avoid it for certain important installations. If anyone has some updates for me, or any kind of advice - I'd greatly appreciate it.
Thank you.
Last edited by azurepancake (2009-02-11 00:56:03)

Dbca fails -- oracle not availabe.

hi
i m using dbca to create db using ASM.problem is its prompting only oracle not available twice or thrice only.
but when i tried to create db using normal fs.it created.
whats wrong.
i have 4 partition using ASM.its on local hdd.
my OS is win xp sp3
db version 11gR1.
rgrds

new2appsdba wrote:
hi
i m using dbca to create db using ASM.problem is its prompting only oracle not available twice or thrice only.
but when i tried to create db using normal fs.it created.
whats wrong.
i have 4 partition using ASM.its on local hdd.
my OS is win xp sp3
db version 11gR1.
rgrdsIam not sure that I did get the question properly or not. Are you saying that when you are creating database using ASM, its not working or when you are creating ASM instance , its onot working? Please explain a little more precisely what's your question is.
HTH
Aman....

Problem starting ASM on non-RAC environment on HP-UX 11.11

I am trying to start ASM on single node running multiple database as I am planning to test setting up on of the db files with ASM.
Wen I tried to start the ASM after I created the init+ASM.ora and exported the ORACLE _SID to +ASM; I got the error below;
SQL> startup
ORA-29701: unable to connect to Cluster Manager
I realized the css was down and I tried to start without much success as shown below; by the way, the ASM home is the same as the Oracle 10g (10.2.0.3) binaries home.
# $ORACLE_HOME/bin/localconfig add
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Configuration for local CSS has been initialized
Failed configure CSS. Fix the problem and rerun this script from destination Oracle home with 'reset' argument
# $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
# $ORACLE_HOME/bin/crsctl set css misscount 600
Failure 32 in main OCR context initialization: PROC-32: Cluster Ready Services on the local node is not running Messaging error [9]
Please advice

This is what I get when I run the localconfig add
# $ORACLE_HOME/bin/localconfig add
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Configuration for local CSS has been initialized
Failed configure CSS. Fix the problem and rerun this script from destination Oracle home with 'reset' argument

Oracle 12c ASM Disk Problem on AIX

Hi All,
We need to install 12.1.0.2 DB with ASM option on AIX 7.1. When we start to install 12.1.0.2 grid installation, in the 3.step we could not show adding Candidate disks to ASM. Disks right are 660 and oracle:oinstall ownership.
When we start to install 11gR2 installation on same platform we can see the Candidate Disk, and We can install 11gR2 ASM+DB on same platform. But for 12.1.0.2 is not.
How can we add Candidate Disks to 12c ASM İnstallation for below step ? The disks which is not shown for this step are like below. After first error I have changed disks' ownership like oracle:asmadmin, it isn't solved. I need urgent help.

Hi Sve,
Thanks for replying me. What you have written are tried but not works. I have solved problem.
The problem is related AIX platform. I have Solved problem with below steps.
1- I have installed grid infrastructure with Software Only option.
2- After install Software Only Standalone Grid, I have tried to install manually ASM instance. But I have taken this error. rtld: 0712-001 Symbol CreateIoCompletionPort was referenced and it is solved with this MOSC ID: Doc ID1949184.1)
3- After Successfull 2.step you can now install ASM manually from asmca.

The Script root.sh problem - ora.asm and ASM and Clusterware Stack failed

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. On step 9 of 10 - execute script /u01/app/grid/root.sh for 2 VMs rac1 and rac2.
After run root.sh in rac1 successfully. I run root.sh in rac2 and get an error as below:
[root@rac2 grid]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= ora11g
ORACLE_HOME= /u01/app/grid
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2012-03-05 16:32:52: Parsing the host name
2012-03-05 16:32:52: Checking for super user privileges
2012-03-05 16:32:52: User has super user privileges
Using configuration parameter file: /u01/app/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
Start action for octssd aborted
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on 'rac2'
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.drivers.acfs' on 'rac2' succeeded
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2664: Resource 'ora.ctssd' is already running on 'rac2'
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl start resource ora.asm -init
Start of resource "ora.asm -init" failed
Failed to start ASM
Failed to start Oracle Clusterware stack
[root@rac2 grid]#
As we see the output above, at the end of the output
1) Start of resource ora.asm -init failed
2) Failed to start ASM
3) Failed to start Oracle Clusterware stack
The runInstaller is in the first VM rac1. My question is:
Do any folk understand how to solve the script root.sh in rac2 problem ( 3 fails of ora.asm, ASM and Clusterware stack as above) ?
Thanks.

Please check there is no firewall exist:
try this like:
root.sh fails on second node
MOS note:
11gR2 Grid: root.sh Fails to Start the Clusterware on the Second Node Due to Firewall on Private Network [ID 981357.1]
Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1] (Most probabily this issue)

Problem with host credentials / ASM & RAC

hi
I am working on windows 2003 server, and trying to ASM / RAC, but every time need host credentials. when i setting up host credentials its giving error normal user password wrong , as per instruction i supply user name and password but every time message appearing wrong wrong.
kindly any body give solution asap.
B.S.fartiyal

See my first response to this posting to see if it helps you:
Problem with Credentials.

Solaris, ASM, Dell T300 IO problem

Hi,
I have a new Dell T300 system with SATA drives and have installed Solaris 10/09 on it and oracle 10.2.0.2. I have restored a database backup to the ASM (2 disks in the group) and am trying to recover the database. Each archive log is taking a long time to restore.
The CPU is idle, the disk io is low but I am seeing this from iostat -cx
device r/s w/s kr/s kw/s wait actv svc_t %w %b us sy wt id
cmdk0 0.0 7.0 0.0 135.6 1.0 0.7 239.7 28 39 6 2 0 92
cmdk1 0.0 6.2 0.0 132.8 0.0 0.0 1.2 0 0
cmdk2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
cmdk3 0.0 20.6 0.0 180.8 1167.2 2.0 56757.5 100 100
cmdk4 0.0 18.4 0.0 251.2 1205.8 2.0 65639.2 100 100
sd0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
nfs1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
In this state the disk is unresponsive, I created a zfs pool on another slice and it hangs whilst the figures look like this . I am performing a find . -name '*' -print and it waits for ages then blurts out a block of filenames then waits again . I think that whenever the log file being restored changes the zfs springs into life and the svc_t time and io rates come back to what I would expect.
I am trying to work out where the problem lies. Is it hardware on the drive controller of the new dell, is it solaris 10/09 (I haven't run oracle on this before) or is it a combination of ASM and the above.
Does anyone have any ideas on how to diagnose the problem?

Now thats better.
the archive logs are applying in seconds as opposed to minutes and look at the disk stats for comparison.
device r/s w/s kr/s kw/s wait actv svc_t %w %b us sy wt id
cmdk0 42.0 380.7 2014.4 5017.6 932.5 1.9 2210.6 96 97 18 7 0 75
cmdk1 44.2 380.0 2060.8 5036.8 901.9 1.9 2130.5 94 94
cmdk2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
cmdk3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
cmdk4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
sd0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
nfs1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
The svc_t times are an order of magnitude lower also %w and %b are still high.
I feel this is more normal. At least it is useable.
Any comments

ASM single instance + CRS daemons start problems Oracle10g rel3 and sun10

We have problems starting CRS by the ?/bin localconfig add/reset/all
We currently belive that sun10 has changed and Oracle10r3 do not cover the changes.
Need references where this work
SUN10, ASM on external (ASM on SAN), Oracle 10.2.03
We have installed oraclsw on 2 Oracle Homes (equal). One for asm and one for the databases and we try as root
sh -x $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME
Giving up:Oracle CSS stack appears NOT to be running
ps -ef | grep css
root 20660 1 0 12:05.09 ? /bin/sh /etc/init.d/init.cssd run
ANY referenses ????
Best Regards
Eivind

We have problems starting CRS by the ?/bin localconfig add/reset/all
We currently belive that sun10 has changed and Oracle10r3 do not cover the changes.
Need references where this work
SUN10, ASM on external (ASM on SAN), Oracle 10.2.03
We have installed oraclsw on 2 Oracle Homes (equal). One for asm and one for the databases and we try as root
sh -x $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME
Giving up:Oracle CSS stack appears NOT to be running
ps -ef | grep css
root 20660 1 0 12:05.09 ? /bin/sh /etc/init.d/init.cssd run
ANY referenses ????
Best Regards
Eivind

ASM problem

Similar Messages

Maybe you are looking for