Aspect ratio problems when exporting from FCP and creating DVDs

Hi there
Can anyone help? I'm using FCP to edit material shot using a Sony z1 in SD 16:9 mode. My media displayed correctly in FCP with the 'anamorphic' option ticked in the browser.
I then exported my short films as QuickTime movies and created a DVD in iDVD using those video assets.
When I then viewed the films on a widescreen tv, the films did not display at the correct aspect ratio. They were horizontally elongated, as though they had been stretched twice over, so that objects, people and text appeared fatter than they should.
Can anyone let me know whether there are any settings I could change in either FCP or iDVD to stop this happening?
Many thanks!
Jacqui

this thread may help
http://discussions.apple.com/thread.jspa?messageID=7422463

Similar Messages

  • XL-H1 aspect ratio error when exporting from FCP 1080p24 to compressor

    PLEASE HELP
    I have a finished project in fcp in a 1080p24 project.
    My source footage is 1440 x 1080i 24f from an xl-h1.
    When i export from final cut pro to compressor, compressor squeezes my footage into a square.
    if i export to dvd from compressor the ratio is fine.
    when i export in quicktime thats where the skewed image happens.
    Please help
    thanks

    Hi StingoArmy,
    There is an easy fix for this. Once you export your file to Compressor, you can apply an export option, let's say we're going to export a LAN Streaming Quicktime movie for Internet. Now click on the new bar that's been placed inside your media tab. The settings for this export item appear below in the Inspector. Just below the DESCRIPTION line are a series of options buttons. Clicking the option 2nd from the right (Geometry) opens up a new tab where you can change the dimensions. There are several ways to go about exporting to 16:9, the one I use is to change the Frame Size to "Custom (16:9)", however, you can also do the same thing by changing the Pixel Aspect to "HDV 1080i (16:9)" You should test results for both and see which is the preferred method for your final output, depending on what type of Quicktime movie you are creating.

  • Aspect ratio issue when watching 16'9 idvd created DVDs on regular players

    I am having problems with the aspect ratio of any DVDs that I burn in iDVD as 16'9 - The original video is 16'9 and edited as such in FCP, then exported with current settings selected and then in iDVD I select a widescreen project - preview of the project is fine and when the DVD is done it plays with the correct aspect ratio if I watch on the computer's internal DVD player - but my issue is when I watch on any regular DVD player (on a widescreen tv of course) all the video looks tall and skinny, including the menu.  The only way I found to get the video to look like it's natural proportion is to switch the settings to 4'3 on the DVD player, then it creates almost a "super-widescreen" look where there are bars at the top and bottom of the screen.  On the otherhand, when i used to shoot in 4'3 and create DVDs as 4'3 projects, I NEVER had this problem when watching on a regular DVD player on widescreen TV!  It would take up the whole screen and look normal (I know it must stretch it to fit, but it wasn't noticable).  I thought creating a 16'9 video I should be able to watch on a widescreen TV and it should take up the whole screen and look normal.  Please help!

    No, that is not the way it should work. This may help:
    iDVD: DV widescreen 16:9 workflow from Final Cut Pro
    http://support.apple.com/kb/TS2179?viewlocale=en_US
    Final Cut Express: DV widescreen 16:9 workflow for iDVD at http://support.apple.com/kb/TS1611
    and
    Preparing your Final Cut Express or Final Cut Pro movie to work with iDVD at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6652.html

  • Exporting from FCP and using Compressor at the same time?

    Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

    Only in FCP 7.

  • Export from FCP directly into DVD studio pro?

    Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

    You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
    Here's a tutorial:
    http://www.youtube.com/watch?v=wFgJpd7DEWw
    Message was edited by: Eric Pautsch1

  • Significant quality loss and jagged diagonal lines when exporting from FCP

    I've been working on this problem for several days and I'm going insane! Every time I export my movie from Final Cut, there is a significant quality loss. It is most noticeable in two ways: diagonal lines become very jagged (looking somewhat like diagonal lines in an older video game -- more a diagonal sequence of blocks); also, in some areas such as faces, the colors get a little blurry and there seems to some "pooling" of colors around the edges of the face.
    I'm pretty sure the problem's not in capture: the Quicktime clips that I captured from the camera are all pristine. When I play them in Quicktime, I can blow them up several times their original size, and they maintain their sharp lines. (I also Reverse Telecined them all with Cinema Tools, if that's relevant.) I also know the problem's not just my computer monitor; when I play these movies on my external monitor and TV, they look bad too. The clips look bad after I bring them into Final Cut, and while I'm editing, but at first I figured that was because Final Cut sometimes doesn't show full resolution in the timeline. Still, when I export, the quality of the original captures just isn't there.
    Some details:
    Captured from 24A progressive, Sony HVR V1U HDV.
    Using Final Cut 6.0.1, Compressor 3.0.1, Quicktime 7.2.0, OS 10.4.10 (all the most recent versions I believe).
    I've exported in many different ways: using Compressor (and have tried a number of different settings: the DVD Best Quality 90 Minutes default Setting, as well as using a variety of bit rates from 3.0-8.0, One pass CBR, Two pass CBR, Two pass VBR, Two pass VBR best; Video Formats NTSC, HD 1440x1080...I have tried many combinations. Regardless of the size of the m2v created, the files seem to have the same problem over and over. I've also tried exporting from Final Cut as a Quicktime Movie and with Quicktime Conversion. Same result. I also tried using different compressors with my Final Cut sequence: Apple Intermediate Codec (which I used when capturing -- you have to with the Sony HVR), HDV 1080p24, HDV 1080i60, Apple Pro Res 422, H.264...
    What's happening? Why is Final Cut turning my nice pristine captures into jagged foulness? What can I try that I haven't yet?

    Welcome to the forums!
    Unfortunately, you seem to have tried everything I can think of, and I don't have the latest versions of FCP to know if it is a bug. However, in the off chance that you haven't given this a shot:
    Take a problematic 10 second section of your timeline (set in and out points) and the Export -> Quicktime (not QT Conversion) and make sure that you have it on Quality settings that you captured, and select the "Make Self Contained" box.
    Look at that in Quicktime and see if it's bad. If it's not problematic, use that video file in Compressor for your render.
    Hope that helps!
    ~Luke

  • Aspect ratio problems in exporting HD movie

    Hi
    I have a movie shot in 1920x1080p HD from a DSLR. It's two and a half minutes long. There's some titles, a few photoshop layers, a flash file and some simple voiceover audio. Nothing too fancy all in all.
    All I need to do is convert it in the same ratio so that it can play in Quick Time, but everytime I put it through the AME, it comes back slightly squished (not 4:3, but definitely not 16:9).
    I've tried QT, H.264, Mpeg2, default presets, custom presets, everything. In the output box it displays my video exactly how I'd like it, but the finished product comes out differently.
    The only success I've had is exporting as an MPEG4 file, and the aspect ratio comes out good, but the video itself is choppy, which none of the others are.
    File sizes have ranged from 230mb to 2.3gb, so eventually I'd like to keep this down, but for now I'll be happy with anything!
    Thanks for any help...

    Thank you so much. Works a treat. That sorts me out for most of what I have to do.
    If I can bother you with another question...
    I need to eventually put this video into a powerpont presentation created in mac. With a small .mov file that's fine to play on other macs. But I will run into problems when I need that powerpoint presentation to run on a PC. I think I need an MPEG file version to run on a PC.
    If that's correct, how do I create a non-jumpy mpeg file that's small enough to go into powerpoint. Can I do that on  AME or is it simpler to convert my .mov file in QuickTime to mpeg?

  • Aspect Ratio Problem (black bars on top and bottom in the preview window)

    I have iMovie 08 and I have been shooting video on my new Canon HF100. It appears that in iMovie preview window my 1920x1080 (and even the ones I bring in in 960x540) videos appear to be in wrong aspect ratio - they are stretched beyond 16:9 ratio horizontally. The problem persists if I export the movie through Quicktime - the videos are still stretched. In the preview window in iMovie I have the right 16:9 box but it has black bars on to and the bottom. The clips themselves in the time line seem to be the correct aspect ratio.

    Also I have found this on the export video screen which narrows it down a bit...
    Here's how the source tab of that screen looks...
    compared to the output tab, with the black bars that are my issue...
    So where did I go wrong here?

  • How does a 1.6-gig clip become an 11-gig clip when exported from FCP?

    I captured some video and had to do it in two sessions because my camera kept dropping frames. My first clip was 600 megs, my second was 1 gig. I put them into the timeline and synced them up at the break spot. I wanted to have just one file to work on in Shake, so I exported the two clips as a Quick Time movie -- no compression, self-contained -- a 720 X 480 NTSC file.
    Even with no compression, I expected to get a 1.6-gig movie out of the export, but it was 11 gigs. Where did the extra data come from? And what is the extra data? It cannot get any more resolution than there was to begin with in the original two clips, right?
    Any tips on a more efficient way to handle this situation much appreciated.
    JimBe

    The two segments were each about three and a half minutes long. The camera was a Sony Handycam DV. I did not have any special settings when I captured, I made one choice, to capture both video and audio. Yes, I did select uncompressed when I exported.
    So the camera is acquiring with a codec, it sounds like, but if I select uncompressed on export does that mean FCP will uncompress the compressed footage captured by the camera? I did not think that was possible. Isn't all the information thrown away by the camera when it acquires the footage with its codec?
    I was thinking that "uncompressed" export would just give me back what I put in, a 1.6-gig file. I did not want to compress a second time.
    Is there an export format choice that just gives you what you had without any manipulation of the original data?

  • Error when exporting from FCP

    When I try and export to Compressor(1.2.1) from FCP HD 4.5 i get an error saying that a file of this name already exists (obviously not the case). The Batch then fails within 5 secs or so. Could this be a restriction on the academic version of fcp or something - ie one can only export a project x many times or something? i've seen the related string but turning off anti-virus software doesn't seem to help me at all. any ideas?
    also - I can export as a self containded qt file but even if I do it at the highest settings the finished dvd (made using dvd studio4) doesn't look as good as an old dvd i have that was encoded by exporting to comp. from fcp. is it just my eyes having seen the video so many times that i am seeing things or has anyone else noticed this?

    there's also reports of incompatibility with compressor3:
    http://discussions.apple.com/thread.jspa?messageID=4968107&#4968107

  • QuickTime error when exporting from FCP 4.5 - Compressor

    I'm still on Final Cut Pro 4.5, waiting to get money for a hardware upgrade before I can move to FCP 6, etc.
    I have upgraded to QuickTime Pro 7.2.
    This setup worked fine until today.
    I selected a sequence in FCP and tried to Export to Compressor (the source material was NTSC MiniDV video footage in FCP) using an MPEG-4 Fast Cable Streaming 320x240 export setting. I used this setting successfully to export a very similar project only last week. This evening when I tried exporting via Compressor the attempt failed, and Batch Monitor's log noted a "QuickTime Error -50". I tried this repeatedly this evening, and it produced the same results even after restarting the machine.
    I'm baffled by this. I had no such problem last week.
    Any clues?

    there's also reports of incompatibility with compressor3:
    http://discussions.apple.com/thread.jspa?messageID=4968107&#4968107

  • Aspect Ratio Problems when Copying IMovie Clips

    I am a relatively new user of Imovie. I copied a series of clips from a second movie and pasted them onto the end of my first movie. I shot the video for both movies with a video camera set up for 16:9. Normally my movies display at a standard aspect ratio on my computer but are stretched to the proper 16:9 ratio when I play the movie or DVD on my TV. When I copied these movie clips from the second movie, they pasted as letterboxed clips onto the first movie. When I play the movie and corresponding DVD on my HDTV, I still have the letterboxed top and bottom bars on the clips that I pasted from the second movie into the first movie.
    I am looking for any suggestions on how to fix my movie to get a consistent aspect ratio throughout the movie and get rid of the letterboxing.
    Thanks for the help.
    Tom

    Thank you for your answer.
    Is there any way fix this or do I need to go all the way back and re-import the video from tape?
    Also, when you mention pillarboxing, that means to me the black borders on the right and left side. I am getting letterboxing on the top and bottom of the picture.
    Thanks,
    Tom

  • Audio sync problem when exporting between FCP6 and Soundtrack

    Hi, I'm a newbie to this so apologies for any glaring errors.
    I've recently upgraded to FC studio 2 and have exported the audio of an existing 20 minute custom format quicktime project (720x408, 30fps,) to soundtrack for sweetening.
    Trouble is, when returning the audio back to FCP, the audio is shorter by several seconds and therefor totally out of sync! I've also tried outputting the multitrack audio from within FCP and bringing it back in as a single file and this is also out by several seconds. The output settings are the same as the project.
    If I do nothing to the audio and simply send it to compressor; the M2v and it's aiff play in sync in Quicktime.
    Any ideas or work arounds?
    Thanks in advance for any advice.

    Check you have the very latest version of QuickTime (7.7.1 at time of writing): QuickTime 7.7.1 for Windows
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Aspect ratio distortion when exporting iMovie '08 xml to FCE 4

    Hi, I'm working on a small piece which I started in iMovie '08. Now that I have selected all the content for the piece I have attempted to "share" as Final Cut XML. However, when I import that file into FCE 4 the aspect ratio is all out of whack. Does anyone have suggestions about how to resolve, or place to look?
    Thanks in advance for the help!

    Found the answer here if anyone else has the same problem: http://discussions.apple.com/thread.jspa?messageID=10239568&#10239568

  • Embedding font problems (when exporting from InDesign to PDF)

    A message alert is shown, when opening a pdf - after exporting from InDesign: Cannont exctract the embedded Font Frutiger.
    We have uninstalled the frutiger font and installed an open type. But the font is not embedded anyhow..?
    Can anyone help?
    Thanks very much.
    Jane

    I don't know if you need help scripting this, but...........
    If you can not re-create the PDF from InDesign using the OTF,
    In Acrobat, highlight the text with the acrobat touch-up text tool, right click and go to properties. You should be able to assign the OTF font running on you system, and select the embed option.
    If not, this is why PitStop is an indespensable (sp?) tool.
    Best of luck

Maybe you are looking for