Asset Base Value = 26 "Rem. book value w/o revaluation"

Hello Experts
i have got a requirement from my client. He don't want to have the depreciation on " revaluation amount" for certain asset /s
The current configuration settings are as follows:
(a) Activated new depreciation "EA-FIN" is actived through T.Code SFW5
(b) Depreciation is being used based on "useful life"
(c) New Deprecaition key is configured as "ZREV" with a period control (T.Code AFAMP) of (01/01/11/01). here, i have kept blank against "Revalution" and Multi level key as " Z01"
(d) The Mutl-Level configuration through T.Code - AFAMS -> the Base value is chosen from drop down as "26 - Rem. book value w/o revaluation"
(e) new depreciation key is maintained in asset master data
However, i am getting the value of depreciation is being calculated on revaluation amount.
Kindly help me, is there any additional configuration is required to done?
Regads
Anil Kumar

Hi,
please see the explanation part of note 1475896 (not the coding corrections).
regards Bernhard

Similar Messages

Written Down Value Or Net Book Value

Dear Friends:
The Written Down Value Or Net Book Value given by the client is different in the year 2006 and also different in 2005.Both the years have different amounts.
Also Depreciation as on current date is different and Accumlated depreciation is different which based on last year.
How should i upload this values to T.Code AS91?Please advise.
Regards
MSReddy

hi,
you've 2 alternatives - ask your consultant:
1) upload (NBV) net book value and remaining time
2) upload accumulated APC and accumulated depr. and Planned useful life
-> SAP corrects false depr. with 1st depr.run
A.
Message was edited by: Andreas Mann

Problem with depreciation posting for an asset with a '0' net book value.

Hi,
I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
Do you know how this could have happened and what can I do to get the value of this asset back to 0?
Thank you,
Karol

Hi Murlidhar,
Thank you for your reply.
I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
Thank you,
Karol

Net Book Value - Asset Accounting

Dear Gurus,
I need a clarification regarding Asset uploading in ECC 5.0.
I have uploaded asset balances upto 31.01.07.(Fiscal Year - Apr to March). I have given the acquicition value in the field '***.acquis.val.' and accumulated depreciation upto 31.01.07 in the field 'Accm.ord.deprec'.
When i execute the depreciation for Feb 2007, system is calculation depreciation on net book value as on 31.01.07. But it has to be calculated on the net book value as on 31.03.06.
Please help me in this problem.
Note: Base value - 24 (Net Book Value) in Multi Level Methods.
Thanks & Regards.
Ganesh

Hi Venkat,
When ever you upload asset balances the below two points to be considered.
First, you need to upload the balaces of assets which were not acquired during the current fiscal year(In your case acquired before 31.03.2007)
Secondly, you need to upload the balances of assets acquired during the year (from 01.04.2007 to cut over date (need to be defined in the system)).
You can use LSMW for uploading.
Regards,
Murali
Assign points if useful

Posting Unplanned Depreciation when asset net book value is zero

We recently transferred some assets from one company code to another. However, when they transferred, the depreciation all reversed out YTD.
We are now trying to post the YTD depreciation back in under the original company code, but when we try posting unplanned depreciation, the following error message appears -
"In area 01, you can only post manual dep. up to the amount 0.00"
I believe this is because the asset does not have any net book value now.
Any suggestions on how to resolve this?
Many thanks,

Hi Susan,
do you have the option to reverse the transfer postings? If so, you could specify another period control for transfer postings (such as fiscal year start, etc.) in your depreciation key, with which you can influence how much depreciation is left back respectively transferred.
It is correct that you can´t post an unplanned depreciation on the sending asset now, because the net book value would go below zero. As unplanned depreciation does not influence the ordinary depreciation in the year of posting, this value below zero can not be adjusted with a reduction of planned ordinary depreciation.
I am wondering which effect you´d like to have on the sending asset. Did you post a complete retirement? If so, there should be no APC left which you can depreciate on the sending asset. And as the net book value is zero already, which effect do you want to get? You have to keep in mind that the non-depreciated APC will be continued to depreciate (normally) on the receiving asset. But maybe I misunderstood the problem here ...
Regards,
Markus

Asset Write Up Book Value

Hi,
We need to write up an asset , but the book value of the asset and not the depreciations. Looking in the ABZU it seems that all the transaction type, are connected with depreciations write-up.
Using any transaction type, it seems that the depreciation is the only value we can write up.
Is there any transaction with which i I can write-up on an asset (e.g.) a book value of 200 USD and then start depreciations on this value?
Can anyone suggest me how we can achieve this.
Thanks,
Srikanth.

Shrikanth
You cannot do write-ups for assets alone.
You will have to create a new Z report / tcode form the ABAPers for the same. Such a function dsnt exist in the standard system.
Regards

Net booking value calculation

HI experts please suggest me how to proceed.
I have a 2 fields in DSO deb_credit and net value.
I the query there are 2 restricted keyfigs created based on these 2 fields and later the value of net booking value was calculated based on this.
ex: as in report restricted keyfigs 1 is defined as deb_credit = c then x= net value
restricted keyfigs 2 is defined as deb_credit = d then y= net value
now net booking value = y - x.
Now there is a open hub on the same ODS.
They want us to populate the net booking value also as per the report.
can some one suggest

From what i understand from your question, you want to populate a key-figure Net Booking Value at the open hub level right?
So in your DSO itself add a new key-figure Net Booking Value and write a routine either at the field level or in the end routine to do the logic based on deb_credit field. This shouldnt be difficult at all, let me know if you need help with the code.
Regards,
Arminder Singh

Book Value Calculation for an Asset

Dear All,
Is there any Function Module or Logic that gives the proper book value for an asset?
I have tried using FM "FI_AA_VALUES_CALCULATE"
and referred the field e_anlcv-bchwrt_lfd for Book Value.
But the book value is not matching with the standadrd transaction S_ALR_87012936 every time.
I have also tried FM "FIAA_NBV_SHOW_CALC". But this is throwing Dump.
It will great if anyone can help me out in this.
Regards
Arindam
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:45 PM

AR01 trans. - Assets with values report
AR12 trans. - Asset with no values.
... I would suggest to debug AR01 to see how SAP does it.
Regards....

Where to down load assets with Asset Capitalization date and Book value..

Hi All,
What is table/Transaction code to down load Asset with below details:
1) Capitalization
2) Acquisition value
3) Book Value
4) Book Dep Value
5) Cost center
Thx In advance..
Regards,
Shirisha

You can try the Asset History Sheet report S_ALR_87011990 (which has all fields except for cost center) and if you want additional fields you can choose to add new fields through the link [Include own fields in FI-AA standard ALV |https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV] the relevant report for Asset History Sheet should be Asset History Sheet -> FIAA_SALVTAB_RAGITT includes CI_REPRAGITT (out of RAGITT_ALV01). Else a quicker option would be to perform a vlookup process from another report that has cost centers like S_ALR_87011979.

Which table contains net book value for Assets created with AS91.

Which table contains net book value for Assets created with AS91.
I have a problem locating where the net book value is stored in SAP. Is it simply calculated and not stored in any one place? I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on. If it is stored in a table some place, can anyone please let me know!
Thank you all

Hi anar.samadzade & Michael Stewart
It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
Gross Block & Accumulate Dep you will get from Table: ANLC
http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
Dear anar.samadzade Ask Questions politely
Regards
Viswa

Assets: Net book value 1

Hi experts,
I got the issue that an asset shouldn't be depreciated totally (0) but the net book value of the assets should remain 1 u20AC.
So in the asset explorer the assets has value 1 u20AC, although the depreciation is finished.
Does somebody know, where I can set it in IMG.
Many thanks and best regards,
Nikolaus

Hi
Please set the value in
IMG-> Asset Accounting-> Valuation ---> Amount Specifications -
> Specify memo Value.
Regards
Venkat

Changing Asset Base Value

I have bought one asset on 2006. It is getting depreciated every year. After 3 years I find that my asset value is higher than it should actually be. I want to change the asset value. Can I make the changes, if yes, How?

Planned - This is periodic Depreciation posting like Monthly, Half yearly, and Yearly....
Unplanned - We post this when the Net book value is higher than actual
Ordinary depreciation - This is normal depreciation which we calculate based on the asset and
percentage applicable as per Accounting rules of that country in order to calculate Net asset value.
Special depreciation - Usually, used it for Tax postings
Thanks

Which table or combinations of table that stored net book value for asset?

I need help in finding the above. I need to customize an asset report and need the net book value amount.

hi Mohamed,
basically you have to calculate like this:
+ ANLC-KANSW
+ ANLC-KAUFW
+ ANLC-KINVZ
- ANLC-KNAFA
- ANLC-KSAFA
- ANLC-KAAFA
hope this helps
ec

Calculate Net Book Value For Asset

Hi Guru,
how I Can Coding Program for calculate Asset Net Book Value ( Function Module or Formula)
Regards,
Supperkorn

use :
(1) logical database ADA and structure anlcv
or
(2) fm FI_AA_VALUES_CALCULATE
field anlcv-lfd_bchwrt for current NBV
hope that helps
Andreas

Legacy Asset Net Book Value is Zero-Want to post Sale of Asset for the same

I have Scenario
We have upload the legacy Assets in Year 2005. One of the Asset Net Book Value is Zero. When we are trying to post Asset Retirement, the for that Asset following is error message received:
"Retirement of Old Assets data not possible (No Existing old Asset Data).
Though in the books the Net book value is Zero, we have received profit on sale of Asset.
How post the profit on Asset & also how to take it from the gross block.
Thanks
Rags

Hi,
the e-message stated, that you must use another transaction type:
so not a transaction type with old asset data like 210.
try / test transaction types : 250-275
pls reward useful answers
thx.
Andreas

Asset Base Value = 26 "Rem. book value w/o revaluation"

Similar Messages

Maybe you are looking for