Assign an Diagnostics Agent to two System Types
On my system I have installed SAP using a C-name but the database which is on the same server uses the physical server name. The server has the diagnostics agent installed but when I go to managed system configuration I am only able to assign that agent to one of the system types. Is there a way I can assign the agent to both the ABAP and the database systems?
Hi Mary,
Install a new diagnostic agent on your physical host.
Regards,
Similar Messages
-
Diagnostics agent in managed systems
Hi Gurus,
We are trying to set up RCA in solution manager.
For this, we need to install diagnostics agents in managed systems.
But, i think those agents are already installed in out systems and am not sure of it. Can anyone please let me know how can i find if diagnostic agent is installed in managed system.
Please do clarify one more thing, we need Solution manager diagnostics in solman system and solution manager diagnostics agents in managed systems. Am i correct??
Please help me out on this.
Regards,
Ram.Hi
I have gone through all the documents that specified earlier itself.
Our OS is IBM iSeries, so we have multiple SAP systems installed in a single LPAR.
So all the diagnostics agents for all those systems installed in that LPAR should exist in that LPAR itself.
In that way, we have DAA folder in usr/sap of that LPAR. In that DAA folder, we have mutliple folder called ADMA97, ADMA98 etc. So these ADMnn folders represent agents for each system right?. So, how to idenfify that particular agent is for which system? All i could make out is from SYS/profile folder in that DAA folder. I have checked the profiles and identified the host name related to a paricular SAP system.
As per SAP document, these diagnostic agents are automatically installed with system installation as of SAP Web AS 7.0 SR3. All our systems are above that level and i still see some diagnostic agents are not installes for some SAP systems. Is there any possibility like this? SO if i again install the missing diagnostic agents, will they be created under the same /usr/sap/DAA folder or will it create a new folder??
Hope am clear...
Awaiting your inputs and thanksin advance.
Regards, -
Diagnostics: Agent disappearing from system landscape
Hello,
I want to monitor my Enterprise Portal (EP7) and use Root Cause Analysis for it.
I installed the SMD Agent on EP7, diagnostics is running on SolMan (SM7).
Now the strange part:
Whenever I start the Agent on EP7, I can see it for a short time in diagnostics (e.g. in the landscape management or in the managed system setup wizard).
But shortly after (between 30 - 60 sec.), the agent disappears from diagnostics. Although it is running all the time, it does not show up anymore.
Diagnostics says, the agent is not connected resp. does not found an agent. But it's up and running (and was visible just seconds before) on EP7.
Anybody any idea, why this behaviour occurs?
Thanks and Regards,
JanHi,
We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
Regards,
Srikishan -
Diagnostics Agent installation - which SID for the systems in your landscap
Hi,
I have a question in regads to installing the Diagnostics Agent on the systems in your landscape: ie. I want to install the Diagnostics Agent on all systems, and SAP suggests the system ID "DAA" as standard sid. From my experience there are no errors or exceptions when I use the system id DAA for a few or all systems.
However, will I run into problems later on (for example, when using root cause analysis, etc.)? Can I use the standard system id DAA for several systems/hosts, or should I use a seperate system ID (DAA, DAB, DAC, etc.) for each Diagnostics Agent?
thanks,
WalterHi,
We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
Regards,
Srikishan -
Managed System Configuration step Assign Diagnostics Agent
Dear Experts,
We've newly instaled solution manager system 7.0 Ehp1 via latest sp stack 25 on aix 6.1, we've completed initial and basic configuraiton successfully via solman_setup, and instaled wily introscpe on same host with solution manager system,
Now i am trying to managed system configuration for solution manager system via solman_setup step Assign Diagnostics Agent as demo link below
https://service.sap.com/~sapidb/011000358700001735062008E
I opend http://>SOLMANHOST>:<SOLMANPORT>/smd/go/ADMIN_AGENT
>> Agent Candidates Management
>> Connection Parameters
>> Custom SLD Parameters > Aply and the selected the SMD instance then trying to attached via password SMD_ADMIN
But agent registration is waiting, SMD_ADMIN user is creating when i execute intial configuration, after i change the intial password, password is correct, so why the agent state is waitng status, i also push sld Setting for all from SMD view tab,
I've also try to restart SMD agent, /usr/sap/SMD/J98/SMDAgent/log/SMDSystem.0.log file after restart
Oct 28, 2010 11:07:25 AM [Thread[main,5,main]] Info Starting SMDAgent ...
Oct 28, 2010 11:07:25 AM [Thread[main,5,main]] Info ===> Establishing connection to server 'ms://ccisolman:8101/P4
Oct 28, 2010 11:07:28 AM [Thread[Connector,5,main]] Info Smd connector is disabled because no SLD association and no credentials found.
Oct 28, 2010 11:07:32 AM [Thread[SLD-Registration,1,main]] Info [SLDReg] Next try to push instance data in SLD is Thu Oct 28 23:07:32 EEST 2010
Best Regardshi
pls chk again your sld parameters and check the correct user name, password entered in agent connection management under CUSTOM SLD(in agent candidates management)
jansi -
How to assign two complex type data in message payload
Hi ,
In my xsd file two complex type data is there ,
but when i am trying to add these in message type request and response payload , i can add only one payload,
is it any way to add 2 complex types in message types request and response payloads.
Regards
janardhanEach request and response has but a single payload. You can change the element of the payload to a single complex type from your XSD, but that's it. You can't assign more than one element to the request (or response) payload. Someone please correct me if I'm wrong.
-
Unicode Kernel Diagnostics Agent install on non_unicode kernel System.
We have some ECC 6.0 ABAP systems that do not have a unicode kernel. The diagnostics agent setup guide for Netweaver 7.0 says you should have a unicode kernel DVD for the diagnostics agent install. I was hesitant about using a unicode kernel for the SMD agent and a non-unicode kernel on the ECC 6.0 instance. I tried installing the agent with the non-unicode kernel DVD and got an error that would not let me continue. Anybody have experience with this?
Carl,
David is Right, SMD is itself an SAP Instance(to be considered a seperate system-SAP Note:1365123) with its own exe. So it shouldn't be a problem.
Regards,
Jagan -
Diagnostics Agent Installation in MCOD enabled systems
Hi Experts,
We are connecting MCOD anabled managed systems to Solution Mamager 7.1 SPS10.
But little confused with Dagnostics agent strategy; whether Agent-On-the-fly feature can be used in this case or not?
I am following SAP Note 1365123 - Installation of Diagnostics Agents.
Our MCOD structure is as below:
All Development systems on one physical host
All Quality systems on one physical host and
no MCOD enabled for Productive systems.
Thanks in advance,
RahulHi Alexander,
Thank you for the quick reply. Can you clarify below:
MCOD database host is having 3 DB instances (of development systems) and all the 3 instances are connecting to single solution Manager system.
Does each DB instance require seperate Diag. agent or single Diag. agent will work for all the 3 instance to connect with solution manager?
Thanks in advance,
Regards,
Rahul -
SMD Error in managed system type PI 7.1 EHP1 Step Logical Ports error
Hi people,
Solution Manager Ehp1 7.0 SPS24
I am currently runnig the wizard setup for managed System, everything is fine but when I run for PI 7.1 I get the following error:
Fri Sep 10 20:29:48 2010 Logical Ports A failure occured while creating the logical port for JAVA XI : PORT_NOT_CREATED
Step Logical Ports Details
A failure occured while creating the logical port for JAVA XI : PORT_NOT_CREATED
!! Exception : PORT_NOT_CREATED
Exceptions
com.sap.mw.jco.JCO$AbapException: (126) PORT_NOT_CREATED: PORT_NOT_CREATED
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1511)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3980)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3514)
at com.sap.sup.admin.setup.SolManRfcAdapter.createXIlogicalPort(SolManRfcAdapter.java:185)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:427)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:335)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:549)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1695)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1965)
at java.lang.Thread.run(Thread.java:534)
Any ideas?
Thanks in advanceHi everyone,
Thanks everyone.
Guilherme, finally I understand what really happens. "Refresh" is not working properly in the Setup Wizard.
First I have done what I can:
System Type Managed Products Product Instances
DPI ABAP SAP Netweaver PI 7.1 Application Server ABAP (I could not select PI at the same time)
DPI JAVA SAP Netweaver PI 7.1 Application Server Java + Process Integration
But, when I refresh the browser Internet Explorer appears the following:
System Type Managed Products Product Instances
DPI ABAP SAP Netweaver PI 7.1 Application Server ABAP + Process Integration
DPI JAVA SAP Netweaver PI 7.1 Application Server Java + Process Integration
And then I do not get the error anymore. (I have to repeat step 2 in the wizard "Check Prerequisites for Diagnostics)
And If I run transaction SMSY, I can see how PI is mantained since the wizard refresh SMSY.
Product Instance Selection tab:
Application Server ABAP (Flag selected: relevant)
Process Integration (Flag selected: Also Installed, Technical System[ DPI, Java])
Application Server Java (Flag selected: relevant, Technical System[ DPI, Java])
So, if I use this configuration in the SMSY, when I run "solman_setup", configuring DPI (My PI7.1), when I run "Configure Diagnostics", the wizard shows ABAP + PI as expected.
Thanks a lot Guilherme!! -
Is it possible to maintain two class type for a material
Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AMMr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM -
Inclusion of two condition types in pricing procedure
Dear Sir,
There is a import pricing procedure ZIMPRT in SAP system.The client wants to include two condition types
ZPOR= Port handling charges
ZFCP+CLEARING AND FORWARDING CHARGES.
iIs it possible to do so.I?
What are the factors I need to consider for iincorporating two condition types in Import Pricing Procedure
Regards
Manash DasHi,
Yes you can do it & as needed you can includes two condition types {ZPOR (Port handling charges) and ZFCP (CLEARING AND FORWARDING CHARGES)} in import pricing procedure ZIMPRT. As already have condition types in import pricing procedure ZIMPRT, you need to take care following:
1.u201CStepu201D for both condition types ZPOR & ZFCP (position of the both condition types) in which sequence and exactly where both of the conditions with in a import procedure
2.u201CFromu201D: Which is base to the both condition types ZPOR & ZFCP for calculating further value.
3.u201CFrom & Tou201D: What are the ranges between the steps from and to can be used to specify the range between both condition types.
4.Both condition types ZPOR & ZFCP are preferred for manual entry or automatic.
5.Both values of condition types ZPOR & ZFCP are needed to be given deletion option, if needed.
6.Both condition types ZPOR & ZFCP needed accounting key & accrual key or not which further needed to be captured all related respective cost to separate G/L account( where accrual key assigned to G/L account in OBYC t.code)
Regards,
Biju K -
Hello,
We would like to upgrade our Diagnostics agents to 7.11 based on http://service.sap.com/diagnostics -> Diagnostics Agent Setup Guide information.
It seems that to upgrade the agents means desinstall/reinstall them all ?
Now the queston is: is there a easy way to check the Diagnotics agent version on o.s. level
We have Diagnostics agents installed under hp-ux filesystem:
/usr/sap/DAA/
/usr/sap/DAA/exe contains the (shared) kernel
Using Root Cause analysis -> Agent Administration , wa can see that all agents versions are 7.01.6.1.20100326060452
Thank you and best regards,
Cédric DecretonHello Cédric Decreton
Unfortunatelly you'll need uninstall the old agents
To execute a mass installation, check this note, it'll help you a lot to install the new version in all your landscape.
1294713 Mass Deployment of SAP Diagnostics Agent 7.11
Pay attention to two points
1) Using Root Cause analysis -> Agent Administration , wa can see that all agents versions are 7.01.6.1.20100326060452
This is not the version of Diagnostics agent, this is the version of component LM-SERVICE. How it works ?
When you install the Diagnostics Agent, you must execute the authentication with the Diagnostics Server using host, port, user and password parameters. When the authentication is successful, the Diagnostics Server will deploy lots of applications in the managed system where the Diagnostics agent is installed. The LM-SERVICE is the component that store these applications. For this reason is MANDATORY and VERY IMPORTANT always have the latest patch level of your LM-SERVICE. I strongly recommend the upgrade to Solution Manager SP24 that deliver LM-SERVICE 7.01.7.0. Pay attention that yesterday was released patch level 1 of LM-SERVICE 7.01.7, and it delivers 39 important corrections. If you want stay with 7.01.6, apply the latest patch level from here.
http://service.sap.com/patches => Support Packages and Patches - Entry by Application Group => SAP Technology Components => SAP SOLUTION MANAGER => SAP SOLUTION MANAGER 7.0 EHP 1 => Entry by Component => Solution Manager JAVA Stack => # SOLMANDIAG 7.01 => # OS independent => LMSERVICE06P_2-20004805.SCA Patch 2 for SOLMANDIAG 7.01 SP06
2)
Solution manager Diagnostics agent 7.0X => /usr/sap/DAA or SMD/JXX
Solution manager Diagnostics agent 7.11 => /usr/sap/DAA or SMD/SMDAXX
thanks and best regards -
How do automate using two output types in an invoice based on plant
Hello,
Can you tell me how to configure automatically two output types for the same invoice.
My client has business in USA and Europe.We are using only one sales organization. But we need to print invoices in letter size and A4 size depending on whether the invoice is created in europe or in USA. So , I have created two output types, one for letter size and one for A4 size. How do I configure so that if it is based in a plant/shipping point in Europe it is printed using the A4 output type else in letter size. Please suggest.
SAPSDUSERI do not think you can use plant/shipping point in your access sequence for invoice output on header level, unless you add these fields to header level kommunication structure and populate these fields in userexit.
You can either
1. define requirement routines for your 2 output types which are mutually exclusive (if plant = A routine 1 returns sy-subrc = 0, routine 2 returns sy-subrc <>0, if plant = B routine 1 returns sy-subrc <>0, routine 2 returns sy-subrc = 0). You can assign requirements to output type either in output determination procedure OR in the access sequence. I would do it in output determination procedure. Check transactions NACO or NACE.
OR
2. add your fields to komkbv3 communication structure, populate your fields in thsi structure in userexits which are called from the function module komkbv3_fill and then you can either use then in the access sequence for your output types or create routines as in case 1. but the logic will be a simple check statement since KOMKBV3 is available in these routines.
3. In fact you can use one output type and select your layout in the print program itself... which may be even easier for you. We use this approach to select proper layout for GEOs which may have several layouts depending on region for example... so the output type is defined per country, then layout is selected by print program. (tnapr-fonam = ..., nast-spras = proper language, set country '' to use proper decimal & date format...)
Message was edited by:
Siarhei Mahulenka -
Can i use technical system type 'third party' for r3 system in idoc2file sc
Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
RajeshHi,
<i> can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.</i>
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
<i>And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.</i>
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar. -
PO with account assignment category K and use two cost center
Dear Experts
When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted.
Any input on this please.
Regards
PaulHi,
Check in the PO document - Item level - Delivery tab
There are two indicators
1. Good receipt
2. GR non-valuated.
If you are giving only one cost centre, only GR check box active and GR non-valuated check box is in-active. That's why System creating FI document during GR.
If you are giving two cost centres, Both GR check box and GR non-valuated check box are active. That's why System is not creating any FI documents during GR.
Regards
Ravi
Maybe you are looking for
-
Migration from an external hard drive
I am going to buy a new hard drive for my MacBook. I love the computer, but I just need a lot more space. I'm wondering if it's possible to "migrate" from my old computer to my new one. What I would do is copy my old Mac hard drive to my external har
-
Error in configuring content server
Dear All i am configuring external content server I have defined my content repositories using tcode OAC0. parameters are as follows: content repository : ZXYZ ( XYZ is my content repository) Document Area : DMS Storage type :HTTP content Server Ver
-
Can't open Itunes. Update states system not compatible with leopard 10.5.8
I was trying to sync music to my Iphone through my Computer, Mac 0S X Leopard version 10.5.8. Couldn't open iTunes. There was a update for iTunes and I downloaded it but before it could be loaded to my computer, it said my operating system needed t
-
Air play keeps getting dropped from TV
Since the latest software update, videos I'm watching sent from my iPad using airplay keep getting dropped. Is there a problem with this update?
-
Hi experts, i am facing a strange problem. in my application service i wrapped the create method of a entity service via custom operation type. when i try to create a new entity service using the application service method, everything is fine when i