Assign IP Address based on PPTP user accounts

I was asked to replace an existing non-Cisco router with a Cisco 1921 router configured as a PPTP server for multiple PPTP clients to connect to. I was able to get this working but the problem is that I'm using a single IP address pool for everyone but I need to be able to ensure that each PPTP client gets assigned the same address every time it connects. The old non-Cisco router had an easy way to assign each user an IP addres through its web-gui but I havne't been able to figure out how to do it on the cisco router so far. Just to clarify... as an example, every time user john_smith connects they would get 192.168.5.100 and when user joe_schmoe logs in they would get 192.168.5.101, etc. instead of just getting whatever the next free address in the pool is. It seems like I need to make multiple IP address pool with only one address in each pool and associate each username with the appropriate pool but I don't know how to do that or if it is even possible.
I'd appreciate it if anyone could either help me understand how to do this or let me know if it isn't possible.

You will find all the info you need here:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/12-4t/dhcp-12-4t-book/config-dhcp-server.html
Refer to the "Manual Binding" section for Client-Mac reservation pool:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/12-4t/dhcp-12-4t-book/config-dhcp-server.html#GUID-68D87544-7C6F-48C9-9DFE-56F5B7E4A89D

Similar Messages

How do I copy an address book from one user account to another?

How do I copy an address book from one user account to another?

You haven't understood me. Follow these steps:
1. Log in the user where are the files you want to transfer, and open a Finder window.
2. In Finder, select Go menu (on the menu bar) > Go to Folder, and type /Users/Shared. Now you're on Shared folder, so leave that window.
3. Open a new Finder window without closing the old one, go to the folder with the files you want to transfer, and copy them to Shared folder.
4. After copying the files to Shared folder, go to  > Log Out, and log in the other user.
5. Repeat the step 2, and you will get access to the transferred files. Now, you can open them directly from this folder, or you can copy them to a folder on your user folder

Share address book between different user accounts on same computer

my wife and i share one computer, but just started to use separate user accounts to keep our mail accounts separate. all our addresses are stored in the address book on my user account. is there a way to share that account with her so that she has access to all the addresses. this would be much easier that have 2 address books to keep updated.
i do have a .mac account and i have only activated one email address.

thanks for your response andrew. i've tried that but address book asks for the .mac name of the person you want to share with. i don't have a family pack .mac subscription only a single one. so would setting up an email alias for my wife accomplish this? is there a way to do this bypassing .mac all together simply because we're using the same computer?

RV220W can only add 9 PPTP user accounts

I have the RV220W and we are mainly using PPTP for VPN access. I can not add more than 9 PPTP VPN user acounts. When I go to add a tenth account the interface just hangs and stops responding. I can delete a user and then add another user and this works fine. I can also add other types of VPN users. I have upgrade to 1.0.3.5 but this did not help. Could someone let me know how to fix this?

Yes(192.168.50.1 to 192.168.50.10). But I am not talking about concurrent usage. I am just trying to add PPTP user accounts. If I delete a PPTP user account it will let me add a PPTP user account. However, It will not let me add more than 9 PPTP user accounts. When ever I try to add a tenth PPTP user account the interface hangs and does not complete.

Is it possible to have two different address books on one user account ?

I currently have my address book on my mac however I would like to IMPORT an address book that I saved from our family reunion which was stored on someone else's macbook. I would like to keep this new address book separate from my own on my mac. Every time I try to Import the saved Address book, i get a message that says that if I import the new address book it will replace the old one...which is not what I want to do. Also, I do not wish to create another user account just to assign an address book to it.

You can install additional language packs if you want to run the same Firefox version in different languages like I wrote above.<br />
Select the one(s) that you want to install and click them on the XPI site to trigger the installation.
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/xpi/
The Locale Switcher extension allows to switch the language.

Merging Phone numbers and email addresses in a new user account

OK... here goes....
For the last 10 years my wife and I have shared one user account on our desktop computer, a G5 tower.
We have been able to successfully keep our 'digital lives' separate because I used Apple Mail and Address Book with my iPhone, syncing with mobile me. She used Microsoft Entourage and a flip phone.
She has just gotten an iPhone 4S and I want her to be able to sync contacts with Address Book. So... I am FINALLY setting her up with her own user account and getting her to use Apple Mail and Address Book. We do NOT want my Address Book to sync with her new iPhone.
I think I can import her messages and mailboxes into Mail in the new user account easy enough. And I am pretty sure I can get her Entourage email addresses into Address Book also. I have seen some articles online and I think I got it straight.
Here is the part I am not sure about. When she got her iPhone last week the Verizon store transfered her PHONE NUMBERS into the iPhone form her old flip phone. How do we merge the email addresses (from Entourage) and phone numbers (currently on the new iPhone) into Address Book?
I am asuming there are gong to be many double entries and such as the names will not match.... but i do not want to overwrite anything and lose data. Will we just have to suck it up and manually merge the data?
We can not use iCloud yet, as the machine is not Intel and is only running Leopard. There is a new Mac Mini in our near future and I will get the iCloud running for her soon enough. And I anticipate no issues moving over her new user account, from the G5 over to the new Mini.
I ONLY use my white Intel MacBook running Lion and the iCloud to keep MY life in sync these days and doubt I will put my MacBook user account on the new desktop... but I might at some point.
Thanks
Eliot
NYC

highland_ddmac wrote:
I have the 8900 and when I try and synch I get the error "unable to read application data". Very, very annoying.
Wondering why I switched from Nokia!
Can anyone help please??
Hi and Welcome to the Forums!
A lot more detail is needed to understand your issue...for instance:
Your specific BB Model
Your specific BB OS (all 4 octets)
Your DTM version (again, 4 octets)
Your PC PIM version
Your PC OS version
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to exclude user account for auditing.

I would like to know how to exclude user account from the audit policy, such as below.
AUDIT SELECT TABLE BY ACCESS WHENEVER NOT SUCCESSFUL ;
thanks in advance.
May

Security team request to reduce the amount of the audit data based on the user account. Can I use FGA to implement it?possible as it lets you specify the conditions necessary for an audit record to be generated:
FGA policies are programatically bound to the object (table, view) by using the 'dbms_fga' package. It allows you to create any desired condition,
for example: Audit an event only when the following conditions are true:
A table is accessed between 6 p.m. and 6 a.m. and on Saturday and Sunday.
An IP address from outside the corporate network is used.
A specific column has been selected or updated.
A specific value for this column has been used.
more detail available on Oracle by example
http://www.oracle.com/technetwork/articles/idm/fga-otn-082646.html

2 IPhones / 2 User Accounts & ITunes

Me and my flatmate are both going to be getting IPhones when they hit Australia.
My question is:
We have separate user accounts/settings.
I currently sync all my contacts, etc with my Palm Treo 680 from Entourage (via Ical/Address Book) with my user account. When I eventually switch to the Iphone, I know I can sync in the same manner, but I'll obviously be authorising my Iphone to my version of ITunes.
Is my flatmate able to do the same thing on his user account and his version of ITunes to authorise HIS Iphone separately ? It is a common program to both of us.
If this doesn't make sense, let me know.

You can use multiple iPhones on one computer... seeing as you already have separate libraries and user accounts, it sounds like all you two will need to do is connect the iPhones to your respective libraries and follow the set up assistant in iTunes.
CG

Can you create user accounts in LabWindows applications?

I need to be able to create password protected user accounts for my LabWindows application. I say there was a password control. Are there any other built-in functions in LabWindows to create and maintain user accounts for an application? Any add-ons?

CVI does not integrate native functions to tailor an application based on a user account, you must design and code this section on your own.
As an help in this matter, CVI offers a password control to permit a user to enter a password with the usual, asterisk-masked input field: where and how to store passwords and what to do with them is on your responsibility.
As an additional help, I have created a small sample project to permit hashing a text (e.g. a password): since hash does not permit to decode back the original text, you can safely store the hashed text without special precautions (OK, we're not designing a banking application, aren't we? ); to check a password entered by the user you only need to hash the password and compare the hash with the original, saved one: if they're the same, then you can permit the user to log in. Despite it's quite old (developed in CVI7), that sample still works correctly in newer IDEs: I have tested it in 2012SP1 without problems.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.

Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

Deleting the account on your phone only removes if from your phone. The account and it's data remain intact and doing so will not effect your daughter's phone.
To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone. When finished, scroll to the bottom and tap Delete Account. Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On. This will upload your data to your new iCloud account.

Having trouble setting up Guest users account email address

Hi.I've been using my Macmail with my administrative account for some time now.I recently set up a guest user account for a visiting reletive.I wanted to get the "Macmail" e-mail program up and running as well so they could use the same e-mail address that I use with my administrative account.After clicking on the Macmail icon in the dock and going through the steps to set up the account......I was then able to successfully send out and recieve a test e-mail. However...........after logging out of the guest account and back to my administrative account and then logging back into the guest account again.........when I now click on the Macmail icon in the dock........the e-mail program starts asking me to go through the steps to set an email program up again.It seems to have "forgotten" or disregarded that I already did this the last time I was logged in.I'm wondering why its doing this and how do I permanently set up this email account so that it doesn't disappear every time I log out? Thanks for any assistance.

Files created while using a guest account are deleted when the user logs out. A temporary home folder is created for the guest’s files. When the they log out, the home folder and it’s contents are deleted.
Instead create a standard non-admin account...
Create a new User go to System Preferences > Accounts > "+"
-mj

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

Is this itunes on the iPad or on my computer? Thank you for the reply.

How to recreate a deleted user account w/ same email address

Hi,
I have a MacMini running Maverics 10.9.1 and Server 3.0.1. In the server, I also have the Open Directory running, but there are no Local Network Users configured at the moment.
I deleted one of my Local Users from the server and would now like to recreate the account with the same email address as the old one had.
When I try to do this, I get an error message from the Server>Users>New User scree saying "The email address [email protected] is already in use".
Apparently the user deletion from the Server>Users screen did not compeltely delete the Local User from the server. How can I get the user including the old mailbox completely deleted?
wbr,
tatu

Just one more piece of detail: the reason why I deleted this account was because every time someone sent it an email to address [email protected] it got delivered to [email protected]
After the Local User account deletion now, apparently the [email protected] still works but all mail is piped to [email protected]
So, how do I disable/fix this [email protected]>[email protected] pipe and then how do I remove the old [email protected] mail box out of the server completely?
wbr,
tatu

Address Bar works on one user account and not on the other

Hi,
I've trawled through so many forums to find an answer to my problem - perhaps it's quite unique.
About a year ago my firefox address bar's autocomplete stopped working at all. I have the latest version and I've tried all the tricks around dumping the cache etc. Anyway, I got a new Mac yesterday and I opened up Firefox and everything worked as it should - great.
However, I moved all my files/settings/applications etc across from my ole mac via migration assistant and now firefox does not work properly on that user account. So, I have two user accounts on the same mac, both running the same software applications. The user account with all the old files etc is the one I want to continue to use but Firefox won't work properly on it.
I've uninstalled and reinstalled, updated the version, cleared the cache...everything I can think of.
I'm sick of Chrome crashing on me.
Can anyone help???

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Assign IP Address based on PPTP user accounts

Similar Messages

Maybe you are looking for