Assign request to another BizTalk Server in Multi server environment.

We are having 2 biztalk server in load balance, when one server goes down the request already assigned to that server gets stuck in Active mode only when the server comes up they get process, can I assign those request to the other biztalk server without
waiting for the server to come up.
Regards, Dharm Raj

Is your Host(s) represented by Host Instances on both BizTalk Servers? Also are all Host Instances running?
Morten la Cour

Similar Messages

CF installer server or multi-server configuration

Previous versions of CF installer allow you to install either server or multi-server configuration.
This made it hard to change a CF box from server to multi-server since you would have to re-install CF to apply change.
CF10 installer lets you install stand-alone installation. After installing ColdFusion in stand-alone mode, you can create multiple instances (provided you have an Enterprise or Dev license).
Nice. Easy to alter a CF box from server to multi-server.
Thanks, Carl.

Hi，
i read the issue in detail. however it is hard to troubleshoot via froum.
To such issue, it is not an efficient way to work in this community since we may need more resources, for example memory (application) dump or ETL trace, which is not appropriate to handle in community. I’d like to suggest that you submit a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
Please visit the below link to see the various paid support options that are available to better meet your needs. http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Deploy Exchange 2013 Edge Transport Server for multi-site environment

Hi,
I have a multi-site Exchange 2013 environment. The configurations are as below.
Active Directory Sites and Exchange Servers.
SiteA - EXMB1 & EXCAS1
SiteB - EXMB2 & EXCAS2
SiteC - EXMB3 & EXCAS3
All sites are connected via VPN. (Good speed. No latency issues)
All the three Mailbox Servers are in DAG. Only one mailbox database. All servers running Exchange 2013.
I am planning to deploy Edge Servers in the infrastructure (I am doing it for the first time). Normally, it will be in DMZ.
Now, I can deploy 2 Edge Servers for reliability.
Question.
1. Can I deploy 2 Edge Servers and create subscription to all the mailbox server in 3 different site? Or, is it like one edge server can make subscription to only mailbox servers in one Active Directory Site? I am not sure about this and could not find much
information from TechNet.
One Edge Server can make subscription to all 3 mailbox server in 3 sites. Similarly, I can make the subscriptions in the second edge server as well. Configure 2 external MX records with the same priority so that there will be some load balancing.
Also, in such a case if the mailbox database become active from a different site, I need not make any new changes to the Edge Servers right?
2. If the first way is not correct, I will have to deploy 1 Edge Server each for each of the Active Directory Site. (In DMZ only, not in domain)
Make Edge Subscription to the mailbox server in corresponding site.
Make 1 MX record and point it to the Edge Server which is subscribed to the Mailbox Server from which the Database is Active. The problem is, every time will have to change the DNS record when ever the database copy is activated from a different mailbox
server. And the issues with propagation.. delay..
I am not sure which of the above 2 ways will work. Appreciate suggestions from anyone who have previous experience with similar infrastructure.
Thanks in advance. :)

Hi
One or more Edge Transport servers can be subscribed to a single Active Directory site. However, an Edge Transport server can't be subscribed to more than one Active Directory site. If you have more than one Edge Transport server deployed, each server can be
subscribed to a different Active Directory site. Each Edge Transport server requires an individual Edge Subscription.
A subscribed Edge Transport server is associated with a particular Active Directory site. If more than one Mailbox server exists in the site, any of them can replicate data to the subscribed Edge Transport servers.
I don't think there is a solution to subscribe edge servers for more than 1 site. Edge Servers can be scoped only to one site.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Error starting HTTP-Server: Cannot assign requested address: JVM_Bind

Hi.
Anyone know how to configure the Oracle HTTP server within Jdeveloper9i to work?
When I try run a JSP page, I get the following error:
C:\Oracle9iDS\jdk\bin\javaw.exe -ojvm -classpath C:\Oracle9iDS\j2ee\home\oc4j.jar com.evermind.server.OC4JServer -config C:\Oracle9iDS\jdev\system\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8888, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Error starting HTTP-Server: Cannot assign requested address: JVM_Bind
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
Please contact me at [email protected]
cheers paul

A JVM_Bind error means that the port is already in use. This is an unusual error message to get because JDev scans the ports ahead of time to make sure they are free before launching the server.
Check if you have any processes running that might be holding port 8888. There might be a previous instance of the OC4J server running that hasn't released port 8888 yet. On Windows, at a command prompt, you can use "netstat -a" to see local ports that are in use.

How to dispatch the request to another server

Is there a possibility to dispatch the HTTP request to another server using servlet API.
I want my application to act like a proxy and route URL's to different applications and
get the reaponse to the client ,
this is typically i want to do to avoid single origin policy restriction
any ideas...

Take a look here and [here!http://download.oracle.com/javase/6/docs/api/java/net/URLConnection.html].
- Saish

Sessions in a multi-server env...

Hi guys, I have a question concerning sessions in a multi-server environment...
The scenario is this-- There is hardware-based load balancer distributing across two or more webservers, which tie into a central database...
My question is, what is the accepted way to propogate sessions from one webserver to the next? What I mean is, if the user hits webserver A and starts a session and the next request happens to get routed to webserver B, how can webserver B access the session that was started on webserver A?
The immediate application of this would be to keep a user "logged in" or shopping cart ability.
I have a few ideas but would like to hear yours before I taint the discussion :)
I'm very sorry if this has been discussed before, but I did search and did not find what I was looking for (searching for "Session" isnt very helpful...)
Thanks a bunch!

The big application servers from ATG, BEA and IBM handles this in roughly the same way.
You have several app.server instances handling user requests. In front of these you have an app.server instance in "load balancer mode" which dispatches incoming requests in ongiong sessions to the app. server instance the session is located on, and dispatches requests for new sessions to the least busy app. server.
This is all fine until one of the app. servers breaks down, is taken offline for maintenance or suffers network or hardware failure. The better application servers are capable of making the sessions that ran on the downed app. server instance move to another app. server instance. To facilitate this, the content of all sessions are constantly being mirrored to another app. server than the one handling the session. This is done by means of serialization. In this way sessions can continue running uninterupted even if the app. server that handled them goes down with no warning.
It's facilities like this that makes it worthwhile to pay the premium prices for ATG Dynamo, BEA WebLogic and IBM WebSphere over application servers like tomcat.
One of the niftier setups I have seen was made with four SUN boxes in as many countries, each running a localized version of a news service website. These servers acted as session mirrors for each other, So whenever one of the national servers went down, the traffic and the live sessions were moved to one of the other servers.

Ntp refuses to sync with error "Can't assign requested address"

I'm attempting to use ntp to sync to several different time servers, including hte apple server and those in the ntp.org server pool. In all cases, I cannot sync correctly, with many system log and consol error messages of the form:
ntpd[5123]: sendto(xxx.xxx.xxx.xxx): Can't assign requested address
I checked that the firewall is allowed UDP connections on port 123. Some googling hinted that hte problem may be changing IP address of my laptop when i sleep it and wake with a different IP, so I manually restarted it, and everything was fine.
Anyone know how to reliably start/restart ntp when I wake from sleep?
cheers

It looks like Java is consuming all client-side TCP
ports. When the error occurs, I also start to have
problems connecting from my browser to any Web-page.I would take this as an indication, that the problem is on the server side and the web server might keep some resources after the client disconnects from the socket. You could verify that if you run your test program from another computer after the error occurs. If that program is again able to open connections, then this might indicate that the problem is in fact on the client side. However if also access from another machine is blocked, then I would guess it is a server side problem.
Am I having to wait for the garbage collector to free
the ports, or is this an OS X problem?Garbage collection is not an issue here.

Multi-server load balancing

Hi,
Currently I'm working on a simple electronic newspaper application. In this application, after login, users can download articles from a digital newspaper. The client application sends content requests to a server-side component in order to retrieve the article.
In order to have a scalable infrastructure, the server-side of this application is implemented using the multi-server paradigm.
Our application has to have some very basic load balancing between the servers:
- the total amount of downloaded bytes over a pre-defined time T has to be calculated for each server.
- if this value exceeds by 10% the average value for all servers, the request has to be redirected to another server. In this case, the client gets a reference to another (less loaded) server.
In order to load balance the servers, the number of downloaded bytes over a given period should be tracked, and communicated within the server pool.
My question is, how can this be implemented using standard Session Beans ? Do I have to use stateless or stateful session beans ?
Does somebody have some ideas about the design of this application concerning the load balancing functionality ?
Thanks !
Filip Blondeel

Hi
I want to clerify one thing that,
whether you want to
the number of downloaded bytes over a given period should be tracked? and communicated within the server pool with the session beans or what?
regards
Santosh Thakur

Request 0 of type 38 failed with server error - but it worked anyway

I'm trying to modify the rights that a certain group has on a certain folder. When I modify the rights (in Assign Security in the CMC) and click OK, I get the error:
An error occurred at the server during security batch commit: Request 0 of type 38 failed with server error : You do not have sufficient rights to make the requested security changes
However, when I click cancel and View Security, I can see that the change actually worked. Why do I get this error? Is there some right that I need to be assigned in order to stop getting the error?
I'm logging in with a test ID that has the following rights on the folder:
     Add objects to the folder
     Copy objects to another folder
     Delete instances
     Delete objects
     Edit objects
     Reschedule instances
     Schedule document to run
     Schedule to destinations
     Securely modify right inheritance settings
     Securely modify rights users have to objects
     View document instances
     View objects
The test ID has the following rights on the group:
     Add objects to the folder
     Delete objects that the user owns
     Edit objects that the user owns
     View objects
We're using XI 3.1; I've gotten the error when testing this in both FP 1.6 and FP 2.3. Thanks for any help you can provide.

I just realized that I need to correct what I said. The rights that the ID has to the group are as follows (more rights than I mentioned originally):
Add objects to the folder
Delete objects
Delete objects that the user owns
Edit objects
Edit objects that the user owns
Securely modify rights users have to objects
View objects

Scoket connect fails with: Can't assign requested address

Hi All,
I am running Java on Mac OS X 10.4.8 (Intel). I run the following code:
for (i=0; i<20000; i++) {
     java.net.Socket socket = new java.net.Socket();
     socket.connect(new java.net.InetSocketAddress("localhost", 80));
     socket.close();
After about 16380 local TCP connections, connect is failing with the error message "Can't assign requested address".
After waiting for a while, I can connect again.
It looks like Java is consuming all client-side TCP ports. When the error occurs, I also start to have problems connecting from my browser to any Web-page.
Am I having to wait for the garbage collector to free the ports, or is this an OS X problem?
Any help or ideas would be welcome.
Thanks,
Paul

It looks like Java is consuming all client-side TCP
ports. When the error occurs, I also start to have
problems connecting from my browser to any Web-page.I would take this as an indication, that the problem is on the server side and the web server might keep some resources after the client disconnects from the socket. You could verify that if you run your test program from another computer after the error occurs. If that program is again able to open connections, then this might indicate that the problem is in fact on the client side. However if also access from another machine is blocked, then I would guess it is a server side problem.
Am I having to wait for the garbage collector to free
the ports, or is this an OS X problem?Garbage collection is not an issue here.

Recorded Videos after Sync: The requested URL was not found on this server.

A few days ago, i recorded a couple of videos. They were saved properly and i could watch them after it in the Camera Roll of my iPhone. Because my memory was almost full, i connected my iPhone to my MacBook and synchronized about 900 old pictures with iPhoto and selected to delete the pictures after the sync. I did not select the recently recorded videos.
After the sync, i opened the Camera Roll on my iPhone and tried to watch the videos again. But now, they all have a grey icon and it says the duration is 0:00 minutes. When i click on a video, it shows me the following error message:
The requested URL was not found on this server.
When i connect my iPhone to iTunes, it says that there is about 350 MB of "Documents and Data" on my phone that I have no idea where it is coming from. Do you think it is possible that the videos are still saved on my phone but my phone doesn't recognize it as videos and can't assign it to the icons in the Camera Roll? Do you have any tips how I can access the videos in case they are still saved somewhere on my iPhone?
Thank you very much in advance for your help and tips!

I have the same problem too!! I was deleting some photos and videos in my phone when the next picture I swiped to was a blank picture with JPG in the middle~ after I closed camera roll and reopened it my photos and videos after that picture are all gone~ and I'm left with 3 videos I took about 30 mins before with 0:00 and when I tried to play them the message popped up saying "requested URL cannot be found on this server" T^T does anyone have a solution to this problem?

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Rcmd: socket: Cannot assign requested address on Solaris 10

Hi,
I am having some problems with rsh/remsh on solaris 10
while trying to rsh from a V890 to another V890 , I am getting this error message sometimes "rcmd: socket: Cannot assign requested address" and the /var/adm/messages file shows this
May 26 11:26:54 hostname rsh[7895]: [ID 521673 daemon.notice] connection from "hostname" (IP address) - bad port
This is causing an issue because the app team is cont.injecting files from/to servers
the release level is Solaris 10 5/08 and the patch level is Generic_127127-11
Any help would be appreciated

Try to reduce the tcp wait time to 1 minute.
#ndd -set /dev/tcp tcp_time_wait_interval 60000
This setting do not survive a reboot. Tune the paramter to the value which works fine for you. Create a script with the correct setting and add it to rc scripts directory.

How to deploy Qaaws queries and Xcelsius in multi server architecture

Hi Experts ,
I have developed a very good looking dashboard which uses qaaws queries (Dev ) to get the data in to it . I have deployed these qaaws queries to another server (UAT ) using deploy option in Query as a Web service . But still the webservice URL pointing to my DEV server .
Also , I saved my xcelsisu file to the BO platform (in DEV) and then I imported this file in to my UAT server using import wizard . Now I opened this xcelsius file in the UAT server . In datamanager , Still I can see my webservice URL's pointing to DEV server .
How can I deploy Qaaws and Xcelsius in a mult server Architecture . We have different servers for each environment ( Dev, INT,UAT , PRD )
Need some one help to getout of this problem .
Please note that my output of Xcelsius is in PDF file .
Many thanks in advance.
Regards,
Dirasa

There are several options, and an approach to make the QaaWS services environment independent
1. When you use the QaaWS clinet builder and use the option to Copy to another server, you'll need to select the Advanced Parameters button on the 1st screen and change the server environment referernce.
2. QaaWS services can be captured adn moved with the import wizard and Bair files. You may want to consider this option if you also want to capture adn contriol the QaaWS defintions for change,manangement, release management and source code control and rollback. Moving to an new BusinessObjects environment with Import wizard may require changnig the server environment reference with the AqqWS client connected to the target environement after it is moved.
We have found an approach to make the QaaWS data connections in Xcelsius BO environment indendent and relatively referenced, so when you move Xcelsius dashboards sourced with QaaWS between BO environements you don't need to redefine the data connection in Xcelsius
In Xcelsius data connections, after you paste the QaaWS WSDL on the definition tab, and import the Web Service URL field is populated with a full web service URL path http://BusinessObjectsServer/dswsbobje/qaawsservices/queryasaservice
We have found the after the import you can edit the web service URL and remove the BO server reference at the beginning and start it with /dswsbobje/qaawsservices/queryasaservice .
Xcelsius dashboards in the BOE with QaaWS data connections still works to supply data to the dashboard. When the dashboard run the BOE must assume that without an explict server reference, that it must be the current BO environment. Another advantage of this approach is it avoids the need for a crossdomain.XML file on the BO web server.

Assign request to another BizTalk Server in Multi server environment.

Similar Messages

Maybe you are looking for