Assign search help to a field in PCUI

Hi Friends,
Here is my requirement. I have designed a PCUI application which searches the address based on the post code entered. Now the standard method to assign this application as search help is to specify the name of the application in the "input help" property of a field in the field group.
I have implemented the same for the field POST_CODE1 of the field group ADR_DETAIL_POSTAL which is a part of service order application in PCUI. Now when i try to use the same thing in street field, it does not work. the F4 help just does not come. It works fine for STR_SUPPL2 field, House_num1 field and all other fields in the field group except for the Street field. ANd the client wants in only on the street field.
I am not able to understand that what might be the possible mistake. Any help in this matter will be highly appreciated.
Thanks in advance,
Karan

Check the FM: HELP_VALUES_GET_WITH_TABLE_EXT
Check the documentation for example code.
regards,
Ravi

Similar Messages

Dynamically assign Search Help to the field

Hi All,
I have creates one search help from se11 like zshlp. i m not assign this search help to the database field. bocz i used this search help at runtime. so how can i assign this search help during execution time of my program.
Reward for helpful answer.
THANKS & REGARDS,
SAHIR

Hi Sahir,
Creating dynamic search help means the f4 help will come on the context bases.
that will achieved with function module
1. F4IF_INT_TABLE_VALUE_REQUEST : Display internal table as search help (documented in SAP)
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
REPORT ZTEST_F4HELP .
parameters: p_vbeln type vbak-vbeln,
p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
posnr type vbap-posnr,
matnr type vbap-matnr,
arktx type vbap-arktx,
end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
translate_to_upper = 'X'
tables
dynpfields = dynfields
exceptions
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
others = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
importing
output = p_vbeln.
select posnr matnr arktx into table help_item
from vbap
where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'POSNR'
dynprofield = 'P_POSNR'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = help_item.
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T

"F4" search-help for custom field in PCUI

Hello all,
Does anyone know how I can create my own simple F4-help for a custom field I have added to a custom Tab Page in the PCUI? It should show a selection from a custom table.
I couldn't find an useable example in the PCUI-cookbook.
Any ideas anyone?
Kind regards,
Martijn de Jong.

Hi Manuel,
I saw that paragraph but didn't know how to implement it. Maybe you or someone else can explain/translate in steps what I have to do, according to the text underneath, i want to use a combobox:
"If you want the application to specify the values for selection (within popup or dropdown list box or
combobox (COBX respectively TIME)) at runtime instead of using predefined domain values, data
must be provided by the application via the method FILL_DROPDOWN_LISTBOX. That scenario
works if the field type is "Input Field" and the F4 application is set to "VALUE_TABLE". With these
customizing settings, the method FILL_DROPDOWN_LISTBOX of the interaction layer is called at
runtime and the actual field values will be passed to the application via importing parameter
IT_SCREEN_STRUCTURE. Thus the application can provide context-sensitive help values within a
popup or a dropdown list box respectively combobox (COBX respectively TIME). Within the popup
more than one column of values can be displayed."
How/where do I (re)define method FILL_DROPDOWN_LISTBOX? Do i have to maintain an own class? and how do i ensure that more columns are shown?
Kind regards,
Martijn de Jong.

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below <b>threads</b>:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
<b>Reward if helpful</b>
Rgds,

How to assign search help for an input field by fetchign values from an int

i have an input field ,
i want to assign search help for the same by fetching values from a table.
how to achieve this ?

Using the below ways you can assign search help to a field.
1) [OVS Search Help|http://wiki.sdn.sap.com/wiki/display/Snippets/OVSsearchhelp]
2) [Freely Programmed Search Help|http://wiki.sdn.sap.com/wiki/display/WDABAP/Freelyprogrammedinput+help]
3) Dictonary Help - Use the Data element for that purpose.

Custom Search Help for the field Equipment number

Hi,
I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
Here after pressing F4(Search help) standard search help is display.
I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
Ex. Field equipment category (EQTYP).EQUNR(Equipment Number).
Please let me know how to work for the customised search help.

Hi,
You need to create a customized search help.
[Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
[Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
Then you need to attach the search help to the screen field..
[Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
[Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
regards
Nitesh

How to assign search help for custom cost centre field in SRM 7.0

Hi Experts!!
We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
Thanks in advance.
Regards,
Kalyani

kalyani,
i can see your requirement in below way..
as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH INTERFACECONTROLLER
so you can replicate the same functionality for your z field.
but can you clarify one thing.. why are you going for this z field in place of standard field ?

Assign Printer Search Help to XREF1 field in FB70/75.

Hi All
I have a requirement where for a particular company code only I need to assign the printer search help to the field Reference Key 1 (XREF1) on the 'Detail' tab of FB70 & FB75.
Is this feasible? If yes, can anyone please guide me.
Regards,
Harsh

Hi,
Try :
PARAMETERS lv_vers TYPE /sapapo/vrsioid MATCHCODE OBJECT /SAPAPO/VRSIOID.
Regards

Assigning search help (F4 functionality ) for recipient field in IW32

Hi,
my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.

hi,
refer to the following link:
http://www.saptechies.com/how-to-add-f4-help-to-a-field-on-screen-module-pool/
i hope it helps
regards

Assigning search help to fields created by T-code OXK3

Hi All,
I have created two new fields using t-code OXK3. These two fields have come in the table control of t-code fb60 at the line item level in place of fields
1.acgl_item_gen-gen_char1
2.acgl_item_gen-gen_char2.
These two above fields were place holders which were replaced by the two newly created fields.
Now my requirment is that i need to provide F4 help for these two fields.
Best Regards,
Kalyan

Hi,
1. You can add new fields in the complex search help of the field
by editing the search help exit. please check search help have any search help exit attached to it.
Frank Zhang wrote:
> And also if I input value "1000" in the company code field, the search help value of field bank code will automatically relate to "1000".
I not sure how a F-02 screen value of company code in the entry screen can be relate with bank code in the search help
a®

Search Help for ROUTE field in VA01

Hi All,
I need help in assigning search help to ROUTE(VBAP-ROUTE) field in VA01 Transaction.Instead of standard F4 list I need a list of Routes from the Custom table which will be maintaned.This new F4 list has to be displayed based on order types...Means only for order type ZXXX it should show the new F4 List, for the rest of the ordertypes it should show the standard F4 List.
P.S : Search help H_TVRO is assigned to the Route.This Search help doesn't have Search help Exit or Append Search help options.
Your help is highly appreciated.
Thanks.
Satyan.

Hi,
You can do that using search help exits you would find several threads already posted to the forum for this like below:
Link[Search Help Exits|Search Help Exit;
Regards,
Himanshu

Search help for custom field in SRM

Hi All,
Im new to abap. I want to add(enhancement) custom input field with search help function for organization unit. I hv added input field and its displaying in portal also.
Now i want to add f4 help. Can u please help me in this regard. Can u tell me the steps to do for adding f4 help.
Thanks,
Rani.

add search help to input fields data type. or you could assign search help via structure there that field is defined. you could enhance standard code adding custom search help which is called via FM. Choose the way.
best regards,
dez_

How to change search help for standard field in me51n.

hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswas

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Search help for a field with no dictionary reference

Hi!
I have created a serchhelp (see se11)
there are two included search helps nested. Each one
has it own serch help exit. First search help has two
fields and one of them is a character field (CHAR030).
It hasn't a reference dictionary table in that case.
How can I assign a search help esspecially for this field.
Its values are stored inside a internal table.
Regards
ertas

Hi,
I think you need to attach a search help to a field programitically .
Below is one sample code.
REPORT ZMSTR0022.
CONSTANTS: C_FORM_NAME TYPE TDSFNAME VALUE 'ZMST_PER_APPL'.
TABLES :ZMST_PERMIT.
TYPE-POOLS: SLIS.
TYPE-POOLS :VRM.                           "Value Request Manager
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-023.
SELECT-OPTIONS:S_PIDNUM FOR ZMST_PERMIT-ZPIDNUM ,
               S_ENGDSC FOR ZMST_PERMIT-ZENGDSC NO INTERVALS LOWER CASE,
               S_ARBDSC FOR ZMST_PERMIT-ZARBDSC NO INTERVALS LOWER CASE,
               S_TARIFF FOR ZMST_PERMIT-ZTARIFF NO INTERVALS,
               S_PERNUM FOR ZMST_PERMIT-ZPERNUM NO INTERVALS,
               S_ARRPRT FOR ZMST_PERMIT-ZARRPRT NO INTERVALS MATCHCODE OBJECT ZMST_PORTS.
PARAMETER:P_PERTYP(2) TYPE C AS LISTBOX VISIBLE LENGTH 20.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_PIDNUM-LOW.
W_NAME2 = 'S_PIDNUM-LOW'.
W_NAME1 = 'ZPIDNUM'.
PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_PIDNUM-HIGH.
W_NAME2 = 'S_PIDNUM-HIGH'.
W_NAME1 = 'ZPIDNUM'.
PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_ENGDSC-LOW.
W_NAME2 = 'S_ENGDSC'.
W_NAME1 = 'ZENGDSC'.
PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_ARBDSC-LOW.
W_NAME2 = 'S_ARBDSC'.
W_NAME1 = 'ZARBDSC'.
PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_TARIFF-LOW.
W_NAME2 = 'S_TARIFF'.
W_NAME1 = 'ZTARIFF'.
PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_PERNUM-LOW.
W_NAME2 = 'S_PERNUM'.
W_NAME1 = 'ZPERNUM'.
PERFORM F4_HELP USING W_NAME1 W_NAME2 .         "calling subroutine to provide desired F4 help
*&      Form F4_HELP
      text
--> p1        text
<-- p2        text
FORM F4_HELP USING: W_VAR TYPE DFIES-FIELDNAME
                    W_VAR1 TYPE HELP_INFO-DYNPROFLD .
Fetching data from zmst_permit for F4 help on PERMIT ID No.--
IF IT_PERMIT[] IS INITIAL.
    SELECT ZPIDNUM
           ZENGDSC
           ZARBDSC
           ZTARIFF
           ZPERNUM
           ZARRPRT
           ZEFFDT
           ZEXPDT
           FROM ZMST_PERMIT INTO CORRESPONDING FIELDS OF TABLE IT_PERMIT.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD        = W_NAME1 " 'ZPIDNUM'
      DYNPPROG        = 'ZMSTR0022'
      DYNPNR          = SY-DYNNR
      DYNPROFIELD     = W_NAME2 "'S_PIDNUM'
      VALUE_ORG       = 'S'
    TABLES
      VALUE_TAB       = IT_PERMIT
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS          = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    " F4_HELP
I hope this will help you.
Help children of U.N World Food Program by rewarding points and encourage others to answer your queries.

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Assign search help to a field in PCUI

Similar Messages

Maybe you are looking for