Assigning a result to two variables

I am trying to assign a string result from a step to two seperate variables, namely Step.Result.ReportText, and a local or file global. I can do this with a post expression, but it would be convenient just to do it with an expression tied to the output of a vi. I haven't been able to find any expression syntax that works. Does anybody know if this is even possible?
I need the expression to do the following:
Assign the output of a vi to Step.Result.ReportText
And
Assign the output of the same vi to FileGlobal.XXX
Any hints?

rimfire44 wrote:
Jigg,
I want to use the content of the Step.Result.ReportText in a post step callback, but as soon as I step into the callback the step properties for the calling step go out of scope and are not accessible. The file global gets around that, so if I could have assigned the desired text to both spots in one fell scoop it would have saved me a little time. Looks like a post expression is the way to go.
You could try PreviousStep.Result.ReportText
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Assigning a value to two variables

I need to assign the same value to two variables is there a way to do this like in some other languages.
e.g. I have the following currently:
l_test := 'valval'
l_counter := 'valval'
I want to condense this down into something simpler such as:
l_test := l_counter := 'valval'
Is anything like this possible?
Many thanks in advance.

Because I need to build up two queries gradually since they depend on situations at runtime i.e. I cannot just write the query in one statement and run it since it is built up gradually based on the application.
One is to obtain the results of the query and the other is purely to count up the results. The reason I am doing this is because it is more efficient than running two CURSORs which is the current situation.
This will result in a cursor containg the results to loop through and a value which equals the number of results. Where the variables will have the same added to them is with the WHERE clause, since the conditions don't change just how they are stored changes. i.e. One is CURSOR to loop through and one is a straight value.

How to make a Java program that recognises a function of two variables...

How to make a Java program that recognises a function of two variables to assign values to that?
First I will give an example and then do the question.
Ex1.
We have any function, eg.y = x ^ 2 + 1 (read 'y' equals 'x' high to the square), a function of the second degree.
To build the graph of this function attach values to 'x' to find the values of 'y'
And thus mount the pair ordered (x, y) which represents a point on the Cartesian plane.
Assigning values to 'x' 'we can build up a table that gives us the pairs ordered:
We can use any numbers, but arfer interval [-3.3]
X | y = x ^ 2 + 1
-3 | Y = (-3) ^ 2 +1 = 10
-2 | Y = (-2) ^ 2 +1 = 5
-1 | Y = (-1) ^ 2 +1 = 2
0 | y = (0) ^ 2 +1 = 1
1 | y = (1) ^ 2 +1 = 2
2 | y = (2) ^ 2 +1 = 5
3 | y = (3) ^ 2 +1 = 10
We then ordered the pairs:
(-3.10), (-2.5); (-1.2), (0,1), (1,2), (2,5), (3,10)
Tabem that can be represented by a table:
X | y
-3 | Y = 10
-2 | Y = 5
-1 | Y = 2
0 | y = 1
1 | y = 2
2 | y = 5
3 | y = 10
Now I begin to explain my doubts.
See this program:
Ex2
* To change this template, choose Tools | Templates
* And open the template in the editor.
Encontrando_o_valor_de_y package;
* @ Author des Soldat Gottes
Import javax.swing.JOptionPane;
Public class (Main
* @ Param args the command line arguments
Public static void main (String [] args) (
Int x, y;
String x1;
X1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',"); / / receives a value for the function y = x + 1
X = Integer.parseInt (x1); / / tranforma String in int
Y = x + 1; / / receives the value of 'x' and calculates' y '
JOptionPane.showMessageDialog (null, "The value of 'y' is: \ t \ t" + y);
/ / Displays the value of 'y'
System.exit (0);
We see that the program receives above a value for 'x' and replaces the function contained in the program, y = x + 1, and so is the value of the variable 'y'.
In: x1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',");
The entry is a number and that number is assigned aa ja existing function in the (y = x + 1).
The question is: would it be possible to come to a function?
Ex: the program ask: DIGITE THE FUNCTION?
The USUARIO DIGITARIA A FUNCTION ANY, TYPE: y = x ^ 2 +1
The program would recognize the function and give numerical values to that function as Ex1, at the beginning of this text.
And then to find the values of the x and y launch a table.
It would be possible that?
By invez of entering with a number so that the program sustitua a function ja existing as Ex2, seen above, entering with a function quaquer (type: y = x ^ 2 +1) for the program atribuisse values to that function and then create a table of values as Ex1.
I hope it has been easier to understand my doubts now.
Thank you for your attention!
God bless!

rafaelmenezes wrote:
Thanks for the explanation, could understand what fly said.
But as it applied to a program?
How to create a program that recognizes that the entry coefficients?Are you asking about how to parse out the coefficients from the string "3x^4 + 4x^3 - 8x^2 + 5x^1 + 2x^0"? If you define the format to strictly follow that example, this should get you started:
Strip out the spaces
Split the String on "x^"
That should give you [3, 4+4, 3-8, 2+5, 1+2, 0]
Split each resulting String on "+ | -", preserving the operator as a token so you can apply the correct sign to the coeff.
That should leave you with [3, 4, +, 4, 3, -, 8, 2, +, 5, 1, +, 2, 0]. Every other number is a coeff, the rest are the degrees.
You can strip out the +, since those coeffs are already positive, and strip out the - after negating the following number. This is all assuming that you have to write this yourself. There is no doubt already a library or 5 out there that does this for you.

Execute SQL task for Email ToLine using COALESCE and two variables

Hello...
I am converting an old DTS package to SSIS. The old package consist of mostly ActiveX Script so I am breaking it down into steps. Basically... I am retreving a set of records that need to be sent via email to multiple people. In my package to create
my ToLine for the Send Mail Task I am using several steps. Frist I am using:
SELECT CASE
          WHEN EXISTS ( SELECT        users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?) ) THEN
             1
          ELSE
             0
       END AS ValidEventID
I use this to see if there is any records to create my email string. This works fine. After this I have a Script Task that splits my pipe in two. When no records exist (User::ValidEventID == 0) I am loging that event to a log. When records do exist
I am using another Execute SQL task to create the actual ToLine:
Declare @combinedString VARCHAR(max)
SELECT      @combinedString = COALESCE(@combinedString + ', ', '') + Users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?)
SELECT convert(varchar(4000),@combinedString) as StringValue
I have my resultSet set to Single Row. I have two variables coming if for the Audit_Id and ErrorCode_Id. My Result Set is set to a Variable: User::EmailAddressString.
Next it goes through a foreach loop to map to the ToLine email variable that I created named User:User_EmailAddress.
Then I am using that in my Send Email Task.
It all works fine when I hard code my variables into the COALESCE statement but as soon as I replace that with the ? that SSIS requires for variables I am getting the following error:
[Execute SQL Task] Error: Executing the query "Declare @combinedString VARCHAR(max)
SELECT      ..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
I have tried changing my resultset property, I have checked my paramenters and my connection. I don't understand why it works fine when I have my varaiables hard coded but not when I change them to the ?.
Thanks in advance for you help in this matter.
Reach for the unknown!

Katherine... that did not work.
What I ended up doing was taking out the forloop all together. In my Execute SQL Task I changed the result set from single row to XML. I took out the COALESCE statement and just went for something more basic:
select users.User_EmailAddress + ';' as User_EmailAddress from Errors inner join users on users.user_id = Errors.MonitorAuditor_User_Id WHERE ([Audit_Id] = ? AND [ErrorCode_Id] = ?)
Currently I am just logging the string to a text file so I can see the results. In my text file the string is surrounded by <ROOT></ROOT>. So I will next I will work on triming that off the string and then populate my Send Mail Task.
This is how I trimed off the <ROOT></ROOT>:
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
"<ROOT>",
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
";</ROOT>",
Thanks again everyone for the help!
Reach for the unknown!

Send two variables to frame

Hi there,
I have a link in a home made coldfusion crm system that I am
trying to make functional. The link displays a meeting date that
our staff can register a client for. It links to a registration
form that automatically should show the meeting form for that date
and the contact's info.
Here is the URL I am trying to use:
<a
href="meetingadministrationframe.cfm?leftsrc=maleftframe.cfm&rightsrc=registration/new_re gistration.cfm?reg_meets=#Get_mtgs.sched_key#&contact_pick=#contact_key#"
target="_self"> --Register #dateformat(get_mtgs.start_date,
'yyyy-mmmm-dd')# MTG</a>
It seems that if I have more than one variable for my right
src, on the resulting page after the sql error message it says:
Parameters
URL Parameters:
REG_MEETS=3234contact_pick=54678
thus it is treating my two variables as just one long
variable equal to the first variable in the URL. Can any of you
experts out there help me. I've consultants breathing down my neck
(as usual) thanks!!!

I would try sending just one set of variables to the frameset
and re-arranging them there for the individual frames.

Assign custom tag output to variable. Is it possible?

I form the code of page like this:
<body onLoad="... #myArray[XXX]# ...">
<cfoutput>#printTable(...)#</cfoutput>
</body>
function printTable is something like iterate process of
creating tree-menu structure:
<cffunction name="printTable" ...>
<cfloop....>
ArrayAppend(myArray, ....)
<cfoutput><CF_treeItem....></cfoutput>
printTable(....)
</cfloop>
</cffunction>
SO - the problem is that I need myArray elements, but they're
created inside printTable function.
I could save everything into the variable and output later,
like <cfset printTableVar = printTable(....)>, but I use
custom tags
What should I do not to change the things too much?
It would be good if I could assign custom tag result to
variable:
<cfset blablabla = "<....>" &
<CF_treeitem...> ....
Ok, i will do it via external variable
(Caller.blablabla)

Obviously the correct solution is to re-write it properly,
but for your question of putting the CT results into a variable,
you just need to use
cfsavecontent.

How to fill two variables from url parameter?

Hello friends,
the following case should be discussed:
The URL restricts the values for 0CALMONTH (e.g. FILTER_IOBJNM=u20190CALMONTHu2019 FILTER_VALUE_LOW_EXT=u20191u2019 FILTER_VALUE_HIGH_EXT='2').
Is ist possible to fill variable VAR01 with the LOW-value and VAR02 with the HIGH-value ?
In our case we want to show in column 1 the value of the actual month, the column 2 the value of the month before. The selection must be given by URL - it is externally generated.
We think about customer-exit solutions (CMOD EXIT_SAPLRRS0_001 for variables), but found not yet any working solution.
Any ideas?

Hi Durgesh,
we talk about a portal solution, where SAP ERP and SAP BW broadcast data. In this case the URL is generated by SAP ERP for SAP BW query.
But the URL restricts the data for the complete SAP BW query, so we cannot restrict in the URL for the actual month only - then the month before is not in the BW-query result (the month before would be completely out of range).
If we restrict in the URL two months, we need to "break" the URL-values into two variables.
Regards,
Matthias
Edited by: Matthias Krause on Oct 25, 2011 9:30 AM
Edited by: Matthias Krause on Oct 25, 2011 9:32 AM

Calculate a result from a variable input

Hello,
I want to get a particular value for a characteristic when I run the query. I have a query that will return actual results for the month/year (MTD) that the user enters at the beginning. It will also show actual results for two months prior to the current month, budgeted values for current month, actual values for the year, budgeted values for the current year.
I want to calculate the number of patients from an invoice for the current month (MTD), and for all the other fields mentioned above. I want to restrict them to a particular code and their recipient ID. Do I have to write a customer exit and then include it in a formula variable? Ive dont have much experience in doing this. Any help would be greatly appreciated.
          Jul 2006     Aug 2006 Sept 2006 Sept 2006 Bud YTD 2006 Act YTD 2006 Bud
of patients
    Code A
    Code B
    Code C
Im using a multiprovider and one of the cubes included is the Invoice cube.
Thanks
Sam

You could do this sort of thing:
REPORT znrw_calculator               MESSAGE-ID z1.
PARAMETERS: p_code1(20) LOWER CASE.
DATA t_source_tab(72) OCCURS 0 WITH HEADER LINE.
DATA g_program_name LIKE sy-repid.
DATA g_syntax_message(128).
DATA g_line_no TYPE i.
DATA var TYPE p.
AT SELECTION-SCREEN.
PERFORM check_dynamic_abap.
START-OF-SELECTION.
PERFORM do_the_business IN PROGRAM (g_program_name) CHANGING var .
WRITE:/ p_code1 NO-GAP,'=' NO-GAP,var.
*&      Form CHECK_DYNAMIC_ABAP
FORM check_dynamic_abap.
DATA t_abap(80) OCCURS 0 WITH HEADER LINE.
*set up a dynamic program
REFRESH t_source_tab.
APPEND 'REPORT'                            TO t_source_tab.
APPEND sy-repid                            TO t_source_tab.
APPEND '.'                                 TO t_source_tab.
APPEND 'FORM do_the_business changing var type p.'   TO t_source_tab.
APPEND 'var =' TO t_source_tab.
append p_code1 to t_source_tab.
APPEND '.' TO t_source_tab.
APPEND 'ENDFORM.'                          TO t_source_tab.
*Generate the dynamic program so that the form can be used subsequently.
GENERATE SUBROUTINE POOL t_source_tab NAME g_program_name
           MESSAGE g_syntax_message LINE g_line_no.
IF sy-subrc <> 0.
    MESSAGE e999 WITH g_syntax_message.
ENDIF.
ENDFORM.                         . "CHECK_DYNAMIC_ABAP

How to merge XML-Data of two variables?

Hi all,
I have to combine information coming from 2 different sources (1st delivered by client input, 2nd delivered by ftp-adapter) for passing it to another service.
So there are different namespaces for the three describing xsd's (2 in, 1 out). As every structure is composed of several elements, I don't want to copy them one by one . But when copying a whole node with child elements, the target structure yields empty nodes, because the target child elements obtain the source namespace!
Using 2 XSLT's works well for each input, but in combination, the last translate deletes the information of the first one.
So, the only way to merge the data I figured out by now, is to use a XSLT for each input transforming into 2 separate Variables belonging to the same namespace and then copying the complete nodes of the two variables into the target (which of course belongs to this namespace as well).
Although there is an inconsistent indexing of the namespaces (see example), happily all data can be accessed.
<CommonData>
    <CommonData xmlns="http://TargetNamespace.com/CommonData">
      <FileInfo xmlns="http://TargetNamespace.com/CommonData">
        <Name>testfile2.txt</Name>
        <Size/>
        <DateReceived>2009-02-10T17:15:46+01:00</DateReceived>
      </FileInfo>
      <FileData xmlns:ns0="http://TargetNamespace.com/CommonData">
        <ns0:KOPF>
          <ns0:Id>1</ns0:Id>
          <ns0:Value>1</ns0:Value>
          <ns0:Text>Hier könnten Ihre Daten stehen -</ns0:Text>
        </ns0:KOPF>
        <ns0:POSI>
          <ns0:Id>1</ns0:Id>
          <ns0:Position>1</ns0:Position>
          <ns0:Value>1</ns0:Value>
          <ns0:Text>eins ----</ns0:Text>
        </ns0:POSI>
        <ns0:POSI>
          <ns0:Id>2</ns0:Id>
          <ns0:Position>2</ns0:Position>
          <ns0:Value>2</ns0:Value>
          <ns0:Text>zwei ----</ns0:Text>
        </ns0:POSI>
      </FileData>
    </CommonData>
</CommonData>Now for the question:
Is this really the only way to merge variables? As it took 4 operations to achieve this, it seems to be too complicated, and therefore too inperformant to me.
BTW: In real life there would be up to 9999 positions whith much more payload to be processed ;-)
Any comments appreciated,
cheers, Marco
Edited by: MarcoSfromGER on 11.02.2009 08:43

Well, if you only want to change namespace (no other changes) I would use a single generic XSL that changes the namespace for any XML document into a given target namespace, keeping the rest. That will require two transformation calls, but only one XSL. I'm afraid I don't have an example available, but if you google perhaps you can find it, I have seen it somewhere.
Normally when you have different namespaces the contents differ as well, though, and what you really want is a merge function. There is a way to pass two documents into a single XSL and that is to use parameters. You pass one source document the normal way and assign the other converted to a string to a paramter. You must use an assign with processXSLT in BPEL, not a transform activity. The processXSLT really takes three arguments and the third contains the parameters. Now to the difficulty - in the transformation you need to change the string into a nodeset (an XML document). In the current XPath version used by the platform there is no nodeSet function, but it is possible to write one in Java. If you have it you can select from both documents while building the third. I don't have an example handy and yes it is a bit messy as well, but much of the work only has to be done once and can be reused in other processes.

How to merge XML-Data of two variables of different namespace?

Hi all,
I am facing a problem manipulating XML data in a BPEL process. As I didn't get any response on my question in the BPEL forum, I decided to post it again in this forum. I am not very familiar with using XML up to this moment, so please don't blame me if this turns out to be a stupid question.
I have to combine information coming from 2 different sources (1st delivered by BPEL-client input "FileInfo", 2nd delivered by a ftp-adapter "FileData") for passing it to another service.
So there are 3 XSDs (2 in, 1 out), each with a different namespace. As every structure is composed of several elements, I don't want to copy them one by one. But when copying a whole node including child elements, the target structure yields empty nodes, because the target child elements maintain the source namespace!
Using 2 XSLT's works well for each input, but in combination, the last transformation deletes the information of the first one.
So, the only way to merge the data I figured out by now, is to use a XSLT for each input, transforming it into 2 separate Variables belonging to the same namespace and then copying the complete nodes of the two variables into the target (which of course belongs to the common namespace as well).
Although there is an inconsistent indexing of the namespaces (see example), happily all data can be accessed.
<CommonData>
    <CommonData xmlns="http://TargetNamespace.com/CommonData">
      <FileInfo xmlns="http://TargetNamespace.com/CommonData">
        <Name>testfile2.txt</Name>
        <Size/>
        <DateReceived>2009-02-10T17:15:46+01:00</DateReceived>
      </FileInfo>
      <FileData xmlns:ns0="http://TargetNamespace.com/CommonData">
        <ns0:KOPF>
          <ns0:Id>1</ns0:Id>
          <ns0:Value>1</ns0:Value>
          <ns0:Text>Hier könnten Ihre Daten stehen -</ns0:Text>
        </ns0:KOPF>
        <ns0:POSI>
          <ns0:Id>1</ns0:Id>
          <ns0:Position>1</ns0:Position>
          <ns0:Value>1</ns0:Value>
          <ns0:Text>eins ----</ns0:Text>
        </ns0:POSI>
        <ns0:POSI>
          <ns0:Id>2</ns0:Id>
          <ns0:Position>2</ns0:Position>
          <ns0:Value>2</ns0:Value>
          <ns0:Text>zwei ----</ns0:Text>
        </ns0:POSI>
      </FileData>
    </CommonData>
</CommonData>Now for the question:
Is this really the only way to merge variables? As it took 4 operations to achieve this, it seems to be too complicated, and therefore too inperformant to me.
BTW: In real life there would be up to 9999 positions with much more payload (in total up to several MBs) to be processed!
Having full control of the namespaces in this case, I could think of using one namespace for all XSDs too. But would this be a better solution? Is there a golden rule on using namespaces relating to design issues?
Any comments appreciated,
cheers, Marco

Well, if you only want to change namespace (no other changes) I would use a single generic XSL that changes the namespace for any XML document into a given target namespace, keeping the rest. That will require two transformation calls, but only one XSL. I'm afraid I don't have an example available, but if you google perhaps you can find it, I have seen it somewhere.
Normally when you have different namespaces the contents differ as well, though, and what you really want is a merge function. There is a way to pass two documents into a single XSL and that is to use parameters. You pass one source document the normal way and assign the other converted to a string to a paramter. You must use an assign with processXSLT in BPEL, not a transform activity. The processXSLT really takes three arguments and the third contains the parameters. Now to the difficulty - in the transformation you need to change the string into a nodeset (an XML document). In the current XPath version used by the platform there is no nodeSet function, but it is possible to write one in Java. If you have it you can select from both documents while building the third. I don't have an example handy and yes it is a bit messy as well, but much of the work only has to be done once and can be reused in other processes.

How do you swap two variables A and B without using a 3rd variable? No fun

How do you swap two variables A and B without using a 3rd variable? No function or method allowed.
For example:
Given:
A = 35
B = 10
Result
A = 10
B = 35

How do you swap two variables A and B without using a
3rd variable? No function or method allowed.
For example:
Given:
A = 35
B = 10
Result
A = 10
B = 35
A = A + B (A = 35 + 10 = 45)
B = A - B (B = 45 - 10 = 35)
A = A - B (A = 45 - 35 = 10)

How do you swap two variables A and B without using a 3rd variable?

How do you swap two variables A and B without using a 3rd variable? No function or method allowed.
For example:
Given:
A = 35
B = 10
Result
A = 10
B = 35

How do you swap two variables A and B without using a
3rd variable? No function or method allowed.
For example:
Given:
A = 35
B = 10
Result
A = 10
B = 35
A = A + B (A = 10 + 35 = 45)
B = A - B (B = 45 - 35 = 10)
A = A - B (A = 45 - 10 = 35)

Creating two variable/selection screens in one BW Report

Hello Experts,
Can I create two variable screens in one BW Report?
For EX:
Variable screen 1 (For Chars/KF)
XXXX     :     -
XXXXXX     :     -
Variable Screen 2 (For Exceptions and Conditions)
XXXXX     :     -
XXXXX     :     -
also How can I change the LOW & HIGH variable to parallel.
I have percentage KF. when I want to display the variable (Between) values in parallel.
EX: XXXX : -
    XXXX : -
    to
    XXXX:------     TO XXXX:----
All inputs are much appreciated and the full reward points will be awarded.
Thanks,
London

Hi Londener,
1 You cannnot create variables for Keyfigures,
Eventhough if you create N Number variables, All variables disaply at one shot.
OR Let me know your exact requirement.
Please assign points if it is helpfull.
By
CCC

How to COmpare two variable in BPEL

Hi ,
I have two compare two variable ( EIN field ) one from input variable of a BPEL process and other one the output variable of a invoke .
My requiremet is like this :
If the the value of both EIN field is same then I have to assign Name field of Invoke output parameter to Output variable of BPEL process .
If the value doesn't match then i have to assign ' No Data Exist ' expression to Output variable of BPEL process .
How can i do this .
Please help me regarding this as early as possible .

You can do this in a switch statement. Perform a comparision to check if the values are the same, if case is not important (because users will enter anything) wrap the code in a case expression, e.g. upper(user_date) = upper(file_data)
What version of SOA Suite and JDev are you using. Make sure that these versions are in sync.
cheers
James

Can i assign a string to a variable in User Exit?

Friends,
I would like ot write a User Exit that will assign a string to a variable depending on the value of the other variable.
I just wanted to know if such a code is valid:
When zimport
IF i_step = 2.      " read user input parameter
        l_s_range-low = 'Important'.
     APPEND l_s_range TO e_t_range.
    ENDIF.
If so, my second problem is that in the variable exit definition with processing Customer type you need to identify a "Dimension" for the variable. Non of them really fit, because the value is a string so why convert it to another format?
Your input is appreciated in advance,
Xibi

hi Xibi,
say you have var1 and var2, var2 will be filled depend on value of var1, you can write something like following.
please be remind that var2 is not marked as ready for input and is set to mandatory variable entry.
hope this helps.
The second step (I_STEP = 2) is called after the processing of the variable pop-up. This step is called only for those variables that are not marked as ready for input and are set to mandatory variable entry.
WHEN 'var2'.
    IF I_STEP = 2.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'var1'.
        CLEAR L_S_RANGE.
        if LOC_VAR_RANGE-low = ...
          L_S_RANGE-LOW = 'IMPORTANT'.
        else.
          L_S_RANGE-LOW = '....'.
        endif.
        L_S_RANGE-SIGN   = 'I'.
        L_S_RANGE-OPT    = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.

Assigning a result to two variables

Similar Messages

Maybe you are looking for