Assigning activities and Adding Info to a Case

Dear SAP Gurus
I found how I can create a case in GUI.
But my challenge now is assigning activities or adding any case related information to a case that I would have created. As is all I can do is create a case's header data such as its case type, person responsible, priority etc.
I would be more than glad if I could get help. Will sure award points.
Shamiso

Similar Messages

When setting up my hubby's new phone to itunes, I have somehow merged the 2 itunes accounts together and now itunes is not responding to my phone and all of my info has synced onto my hubby's phone wiping all of his info and adding mine...Help!!

I have an Itunes account already set up, when setting up my hubby's new phone to itunes, I have somehow merged the 2 itunes accounts together and now itunes is not responding to my phone and all of my info has synced onto my hubby's phone wiping all of his info and adding mine...Help!!

If her data was not backed up or synced to something, it's gone. Sorry.

Assignment of networks / activities and WBS elements

hi experts,
I have some basic doubts... can any ony clarify these:
1.can a WBS element be assigned to several Projects.
2. can a network be assigned to several WBS elements.
3. can an activity be assigned to several networks
4. can an activity element be assigned to several network activities.
thanking in advance.
regards,
priyanka
Edited by: priyanka on Jun 29, 2008 10:54 PM

Hi Priyanka,
Yes, Iam sure that a single network can be assigned to more than 1 WBS at a same time.
A WBS can be assigned several activities even different networks also if required, but an activity can be assigned to one WBS element only. Once activities are assigned to WBS elements, you can exchange data between activities and networks. For example activities can inherit statuses from the WBS elements they are assigned to. Conversely you can total up project activity dates to WBS elements or can check funds allotted to activities against WBS.
A single or several networks can be used in the project structure, to map individual aspects of the project such as activities that are linked to each other via relationships. The relationships between two activities define the logical sequence of the activities (predecessor u2013 successor relationship) as well as their time dependencies. Activities of different networks can also be linked to one another. Advantage of network technique is that, system can automatically determine planned dates for each activity and entire network on the basis of duration of individual activities and their chronological sequence.
Priyanka, I hope this may clear your doubt . .
reward points required please . . .
Regards,
Dhruv Kumar Malhotra

Combining multiple pdfs and then adding info to the blank fields.

i combined multiple pdf's together to make one package. The forms had text field in each of them, when i combined them i tried to add text to the blank spots and the info autofilled from page one on to all of the pages. I do not want this to happen. when i go to the tasks-> Forms-> Edit fields, it brings up each page with the text box and a number next to each one that page. All of the pages have some numbers that are the same and i can not change them so the info does not fill in from info on other pages. How do i stop this?

Do you need the fields to remain interactive or need to extract the field data after you merge the document together?

How to sync the album and track info that I entered into a CD using iTunes with the actual disc?

Hello,
I recently recorded some cover songs, and I imported them into iTunes. So, after entering the track info (track names and album art) into each track using "Get Info", I burned them to a CD. I was completely shocked that the track info and album artwork did not get inputted onto the CD. So, I entered the track info, but could not add the album artwork.
How to add the album artwork is not as important a question. But it's one of my 2.75 questions.
My other issue is that the info that I put on the CD using iTunes is only visible within iTunes. Therefore, I cannot get the track names elsewhere.
My 2.5 questions are:
1) How do I get the track and album info to display in Windows Explorer and Windows Media Player (and the touchscreen CD Player in the car)?
2) How do I add digital album artwork to the CD (so that it shows on the touchscreen CD Player in the car - if iPods have the artwork and it shows on the car's screen, a CD should be able to show the artwork on the car's screen, when talking about limitations of the car)
2.5) How do I make that artwork display across everywhere I plug that disc into?
2.75) How do I ensure that when others import my CD, my artwork, track names, and album name also import from the CD?
I have already burnt the CD, so I would prefer a way to tweak the properties of the already burnt CD rather than burning a whole new disc.
Thank you!
-Royce

1) Metadata visibility in Windows Explorer and/or Windows Media Player depends on OS version and file type. The mp3 format has the widest support. As for the touchscreen CD Player in your car who can say? If it can play data discs the results will be better than with audio CD. If it can display CD text then this option should be selected when creating an audio CD.
2) Artwork cannot be attached to the tracks on an audio CD. If your car system supports it all then it will be with data discs. Check the specifications of the system for the media types it can support on a data disc.
2.5) Simply ensure the artwork is embedded in the tag.
I have two scripts that can help with this, CreateFolderArt and EmbedFolderArt.
The scripts have a slightly different purpose.
CreateFolderArt ensures that every album folder ends up with a Folder.jpg image which is the art that iTunes already knows about. Side effects are that if artwork has been updated in iTunes the folder art should be updated also, and if any track from the album doesn't have embedded artwork it gets embedded.
EmbedFolderArt was actually written for someone who already had various artwork images stored in the folders and wanted them added to their tracks, but not if iTunes had already downloaded a better quality image.
2.75) Again, use a data disc format. Note that you should not be giving away copies of copyrighted material.
Audio CDs are finalized, you cannot change any properties of them unless they are on rewritable media in which case you can erase the whole disc and start over.
tt2

"Clean Install" and General Info

Hey all. Without getting into the argument of whether or not to erase and install vs upgrading (the fact of the matter is that Apple kind of forced my hand on this one by upgrading the included PHP and adding extensions that I manually had to compile in 10.5) I'd like to get some info to be able to do this around the 10.6.1 release maybe...
First, I've read several times that some of you, when doing this, will run the previous system on another drive (assuming Target Disk with Firewire drive?) but I wouldn't know where to begin doing this. So I'm hoping someone can give me some resources for this or lay it out for me.
Second, I've always been unclear about this one thing in macs. When you go to erase a drive in disk utility, do you erase the volume (the first title) or the disk (the second title)? The volume is the one that gives you the partition information correct?
Lastly, I believe someone posted that if doing a "clean install" you lose the previously included iLife apps, but the iLife 09 disk should take care of that right?
Thanks for all the great info!

Hey rothnd.
Well, for question 1, the idea is to back up your current system to another drive using something like time machine, or carbon copy or the like so that you have a copy of your current system (unless of course you are installing 10.6 on a new drive that will be replacing your previous drive, in which case you will just want to have a way to access the data off the previous drive such as a usb or firewire enclosure or another machine to use via target disk mode).
This will give you a resource for retrieving your current software setup from (which in essence will give you a situation very similar to upgrading).
Although, if you are planning to use the included utilities to restore the data from your previous setup, why not upgrade? If you have to compile things again, you have to compile things again, right? The option to get your data off a previous volume is part of the setup.
Secondly, either will do. For all intensive purposes they will both do the same thing. Your drive will be wiped clean and fresh as a new one.
And third, you got it in one
Cheers!
neon

Automatic "Write Keyword Tags and Properties Info To Photo"?

I have PSE8 and one of the reasons I stopped using it was because I had to periodically do a manual "Write Keyword Tags and Properties Info to Photo" so that all the metadata stays with my photos and isn't bound to just the PSE database. This was very tedious to try and select just the files since I last performed a manual write not to mention if any older files were changed that I didn't know about.
I see that the caption/title is automatically written to the files when changed but ratings and keywords are not. Why isn't there any option to write everything automatically when changed? Is this still the case with PSE9? Thanks.

That would take care of newly imported photos but what if someone added a keyword tag later to a photo from several months ago and I didn't know about it.
No, this takes care of ALL files
The only way to make sure all are covered is to select all photos in my catalog ...
This is exactly what 99jon suggested
... and write tags which would result in thousands of unnecessary writes.
If there's no new tag information, then nothing will get written (and even if it did, what's the harm, a photo had 3 tags before, and now it has the exact same 3 tags...)

ITunes 11.0.2.26 stops working when I try and Get Info

Hi, I've never asked a question here before, so bare with me if I give all the wrong information or something...
Recently, I'd been having trouble getting my iPod Touch 3rd gen 64 gb to sync with my iTunes Library. It would sync all my old music but any new music I added was completely ignored. In a last stich effort to fix this problem without having to resort to resetting my iTouch, I decided to update my itunes. I now have the iTunes version 11.0.2.26 and everything seemed to be working fine. My ipod syncs old and new music and all my information is still in tact.
However.
With this new version of iTunes, every single time I try and change a song's information via the "Get Info" button, iTunes suddenly stops working and closes before I've even been able to see the information. A Microsoft Windows window pops up and says,
"Itunes has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution
is available."
This is a screenshot of what pops up when I click and Get Info: http://25.media.tumblr.com/1d3334a0bf5f0a7308b28f4565ff02a6/tumblr_mit8vzNS1E1ro wvqao1_500.jpg
I have a Microsoft Windows Vista
ACPI x86-based PC, driver version: 6.0.6002.18005
465 GB capacity, with only 248 GB being used
As I said before I have a 64 GB Generation iTouch 3rd Gen, and a version 11.0.2.26 iTunes. Windows informs me that all of my drivers are up-to-date and there are no current updates available.
I've tried running my iTunes in safe mode and that didn't help, and I've also tried uninstalling and then reinstalling itunes. I really don't know what else to do other than try that "Create Another User and test" thing. I am really not that well-versed in computers and diagnostics, so I'm hopping I won't have to get elbows deep in the inner files of my iTunes to try and fish out some plug-in or another. Nothing else seems to be wrong. I can sync and add music and create playlists and purchase music. I just cannot edit Get Info without my iTunes crashing.
Should I try and download the old version of iTunes again and just reset my iTouch?
http://www.oldapps.com/itunes.php?old_itunes=6704

First I would try this
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Next remove the Apple software using the instruction above and install a previous version. You can Google to find the previous versions

Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file on the left side

Is it possible to get the style, font and related info of a paragraph text of a in design file and write all the stuff on the same in design file on the left side with small fonts
as
Lets this is a text in in design file    :
style : abc                      we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultur we are going to check the condition Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultu
style : xyz                      we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultur we are going to check the condition Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultu

Hi Poojith
Not sure if this would solve your requirment but just in case might be helpful:
1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
[http://www.sapdesignguild.org/resources/htmlb_guidance/]
2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
Thanks
Deepak

I reinstalled I-Tunes several weeks ago. Since then I can no longer burn MP3 Discs with Title and Artist Info. Sometimes it only burns every 3rd song. No Audio CD it seems to function OK. The version has the "cloud" but I don't know if that matters or

I reinstalled I-Tunes several weeks ago. I can no longer burn MP3 Disk with Song/Artist info onto disc. It comes up as No Artist/No Title on car CD unit. Old MP3 Disk previously recorded still show all info. Sometimes only every 3rd song is on the MP3 CD. On Audio Disc there is no change and all info still shows up. The new I-Tunes version has the "cloud" on it if that could make a difference. In the select Burn CD mode I can select testing and add song info for Audio Disk but it shows shadowed out for MP3/Data. I added and removed ID tagging from my list to see if that made a difference but it didn't.
Any Thoughts?
Jim

This may help. Audio files are actaully in the DATA folder. These can be editted with Soundbooth then they must be imported intot the specific slide in the Powerpoint presentation. Publish the presentation (as you'll read below) and *should* work This reply came from robva65 [email protected]
Let's try this: *Publish* the PPT deck you have. What you'll end up with is a set of files and folders, but I want you to look for the *data folder* that's created as a result of the publishing process. (Unless you specify where you're publishing to, Presenter will publish to a directory called "My Adobe Presentations" by default, so you may have to look there on your harddrive) Inside the data folder will be a list of mp3 files, which, if everything goes smoothly, should make it much, much easier to see which audio is used by a specific slide.
Here's what I mean: for example, after publishing, I have a data folder and inside I found the following file: a24x9x3.mp3 As I double click the mp3 file (which causes it to play using Windows Media on my laptop), I can hear that it corresponds to my slide 9 in my PPT deck. And there's corresponding mp3 files for each and every slide I have in my deck. I'm clicking another file (wouldn't it be nice to see what I'm doing???) a24x20x3.mp3, and that file corresponds to my slide 20 content in PowerPoint.
So again, give publishing in PowerPoint a shot and see if that makes it any easier. Well...not nearly as easy as recording in Audition/Soundbooth/Audacity, but it's close enough to hopefully dig you out of that hole you're in now.
Hope this helps ~rich

Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

Finder issues and Get Info refusing to show the number of files on items on the main hard drive.

I am having finder issues. Mostly on the main hard drive. It takes ages to find things and I get the spinning wheel every time I open a folder.
So I moved all of my files to a external drive. When I had finished transfering I hit get info on the files on the external drive and on the same folder on the main drive. To ensure that it has copied over all the files. Because it was acting up and not copying all the files.
Get Info refuses to show the number of files within the folders on the main hard drive. It hasppily tells me everything on any of the external drives.
I have reset, the imac. I have re indexed 3 times. I have deleted the finder plist files. I have reset finder using terminal commands. I have moved nearly everything off the main hard drive. But nothing is working.
Can anyone offer any suggestions as to what could be causing my finder and get info issues.
Any help wpuld be appreciated.
Running Mountain Lion on a late 2009 Imac

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

TS2446 A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account

A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.

Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one.

Why is LR importing duplicate files and adding a -1 to file name?

I need to locate some missing photos that disappeared from my library so I'm re-importing my photo collection again (from burnt DVD's) in hopes to recover all the missing images. When I insert a DVD to re-import the photo collection and choose "convert to DNG" and I check "do not import suspected duplicates" LR imports the same images that are already in the catalog and renames the images with a -1...for example, IMG_3664.dng is already in LR folder named 2008-06-14. When I re-import the images from that date, LR renames the image IMG_3664-1.dng and puts it in the same folder resulting in duplicate images side by side. Why is it importing the same image and adding a -1 to the file name?
I was expecting it to tell me there are XXX photos already in the catalog but it doesn't. It just adds a -1 to the file name and imports all the duplicate images and displays them side by side in the grid view.
Any ideas? I originally imported the images from the same DVD's I'm using now on a PC and placed the library on an external hard drive. NOw I'm using a new iMAC and I imported that same library from the same external drive location. I'm working with LR 1.31.
Can someone help? LR should recognize the files with the identical date/time stamp and tell me it's already in the catalog...but it's not for some reason.
Thanks

If you import them again, you'll get a "-2" instead of -1, and the -2 will list with the -1,and the original with no dash. The higher number distinguishes the most recent file of same title..
The file titles are identical as original, but it sounds as converting the file from the source,(PC, Hard drive) to DNG makes it another version of the file....do you type DNG in caps? should it be lower case?
Because the computer doesn't read the file as a duplicate, but the file name is the same, you'll get a -1.
This could probably happen,say, if your files are raw, and you had burned them as jpeg onto dvd storage. Even though you want them back as raw, converting them isn't duplicating them.
I hope this helps...I don't even own Lightroom; I'm shopping around between this and Aperture right now...the experience I'm referring to is where I work in a pre-press printing house; So if someone replying to my post who masters in Lightroom calls me an idiot, I won't argue much!!

Difference Between 4.7 and ECC 6.0 in case Of Travel mgmt.

Hi guys,
Please let me know what is the main difference between 4.7 and Ecc 6.0 in case of Travel management.
Thanks

Hi Pulla,
We use R/3 4.7 version for Travel Management (FI-TV) with fairly good features but the latest version ECC 6.0 which is Enterprise Central Component version 6.0 gives you the opportunity to use ESS/MSS ie, using portal to create the trips/claims as against interfaces.
Therefore one difference would be to get the work done easily by logging into a internet site and complete the trips/claims which in turn updates your database tables where as in 4.7 there is no such functionality to use portal to make an expense claim.
There might be other feature enhancements available in 6.0 which I am currently unaware of but surely SAP gurus in this forum will be able to provide more on that.
Hope the above provides more info.
Rgds
CONMJI

Assigning activities and Adding Info to a Case

Similar Messages

Maybe you are looking for